Let us help Apple to find the moo Problem

Hi,
i´m new in this board & sorry for my bad english.
i have read a lot of threads around the world over the MacBook mooing problem.
Many customers wil ship their MB back to Apple to replace the MB.
I called many times the Apple support (germany) and non of the representative had heard of the mooing issue with the MB. I can´t believe it, when i read all the topics (and there are many many many posts)!
An special technician (second or third level support) that i speek had say, i should post in the Apple discus board, to collect more details. Thos board will read from special team, that does read this forum to collect peak problems.
Please let us help Apple to find more details to the mooing (ant the resulting heat) problem.
PLEASE DO NOT DISCUSE ABOUT THE PROBLEM, THERE´S A LOT OF THREADS ALLREADY.
Let us only post the serial number of the mooing macbooks to limit the mooing problem to a production series.
Some users have replaced his MB and become one that does not mooing or whining, i´s possible, that the problem is only a series of MB´s.
many thanks.
Taner
and now the first information about my MacBook from the system profiler:
Hardware-Übersicht:
Computername: MacBook
Computermodell: MacBook1,1
CPU-Typ: Intel Core Duo
Anzahl der Kerne: 2
CPU-Geschwindigkeit: 1.83 GHz
L2-Cache (gemeinsam genutzt): 2 MB
Speicher: 2 GB
Busgeschwindigkeit: 667 MHz
Boot-ROM-Version: MB11.005F.B00
Seriennummer: 4H6185E6U9B
SMC Version: 1.4f8
Sensor für plötzliche Bewegung: Status Aktiviert
MacBook Mac OS X (10.4.6) 1,83 GHz, 2GB RAM
MacBook Mac OS X (10.4.6) 1,83 GHz, 2GB RAM

Hate to tell you, but it has nothing to do with serial number range, I had a 19, and I sent it in, and got a 24, and the 24 is worse than the 19.

Similar Messages

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

My mobile phone is lost, please help me to find the serial number is: DNQKDBS8F8H4, my name is Yu Fan, thank you very much for this is my number: 15052995201

My mobile phone is lost, please help me to find the serial number is: DNQKDBS8F8H4, my name is Yu Fan, thank you very much for this is my number: 15052995201

We're not Apple here. We're users. We cannot locate your phone any more than you could locate ours.
If you did not have find my phone activated on your device, there's no way to track it.

I actually need help but cannot find the answer. Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as

I actually need help but cannot find the answer.
Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as blank as when I first open Firefox, it automatically loads my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
Thank you.
''[Personal information removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''

hello, please refer to [[New Tab Page – show, hide and customize top sites]] in order to switch the feature off.

I have 2 computers (1 Pc and 1 MAC) and 1 Iphone.The I phone is synchronised with the PC. I want to synchronised it also with my MAC, without erasing all my music and files. Someone can help me to find the answer ?

I have 2 computers (1 Pc and 1 MAC) and 1 Iphone.The I phone is synchronised with the PC. I want to synchronised it also with my MAC, without erasing all my music and files. Someone can help me to find the answer ?
i have already try the copy/paste thing with the ID of the file "iTunes Music Library.xml" it didn't change a thing. each time I relaunched Itunes, the ID is the first I have in the MAC.
I have more than 5 000 files of music. I don't want to recreate one by one all my playlits.
Many thnaks for your answers.
Constance

You can sync iphone with one and only one computer at a time. If you sync to another, it will erase the current content and replace with content form the new computer. There is no way around this.
Put everything on one computer and sync from there.
BTW, you posted in the Home Share forum. Your question seems to have nothing to do with home share.

PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"

HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradhar

Hi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420

Can anybody help me in finding the reasons why the time of email received are different from the one on my macbook which time is correct

Hi
Can anyone help me in finding the reason why the date on e=mail reced is different from the one on my MacBook eventhough it is correct
Thanks

Try this...
Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
cmd /k netsh winsock reset
Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
You should get something similar to this:
Reboot the computer and the problem should be resolved.
If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
tt2

HT3775 I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you.The document "IMAG0026.AVI" could not be opened. A required codec isn't available.

I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you. This is for Quicktime Player.
"The document “IMAG0026.AVI” could not be opened. A required codec isn't available."

Try Perian.
http://perian.org/

[SOLVED] Help Needed to find the name of the openbox theme

Can anyone help me to find the name of the openbox theme ?.
Thank you.
It's Numix
Last edited by bhante (2015-01-07 11:13:12)

That looks a lot like the Numix GTK theme...

An anyone help me to find the difference and relation between the following

Hi,
can anyone help me to find the difference and relation between the following methods of Swing :
a) validate()
b) invalidate()
c) revalidate()
d) repaint()

You'd be far ahead by opening up the API and Java turorial and your course book and learning for yourself, rather than, asking other to do your homework for you.
But if you have andwers already to go, then post them and ask if you have drawn appropriate conclusions.

Please help me to find the table for fields where the descriptions are give

please help me to find the table for fields where the descriptions are given below
Customer Support Administrator
first line Support indicator

You could also try table DD01T. In se 16,put in the description thats needed,you will get to know the respective data elements.
Then you can use DD03L to find the respective table. This would work if the data element is not generic.
Regards,
Anubhav.

Please help me to find the sample code and schema for GetDBDateTime.zip fil

Please help me to find the GetDBDateTime.zip and Guest_Book.zip files.
Tks!

Does this Help?
http://www.oracle.com/technology/sample_code/products/ias/files/psp/GetDBDateTime/Readme.html
Did you install Oracle9iAS ?

I can't update my apps? It's says my apple ID is disabled and so I made a new apple ID but the same problem is happening?

I can't update my apps? It's says my apple ID is disabled and so I made a new apple ID but the same problem is happening?

Hi Murphy98,
Thanks for visiting Apple Support Communities.
You may find the information in this article helpful if you receive a message that your Apple ID is disabled:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Best,
Jeremy

Where can I find the "choose problem" drop down menu

Where can I find the "choose problem" drop down menu to report an incorrect billing in my account?

http://www.apple.com/support/itunes/contact/

TS1702 help, are you having the same problem? iPad 2 calendar, can't get the month of March, can get days in March, but not month view. Any suggestions, thank u.

help, are you having the same problem? iPad 2 calendar, can't get the month of March, can get days in March, but not month view. Any suggestions, thank u.

Hi melbernai - not sure if you've solved this problem yet. I had the exact same problem recently with my 2nd Gen iPod Nano. I solved it yesterday by simply updating iTunes to the most recent version, after which I could get rid of the register screen. The only other thing I needed to do to add my custom playlists was select "Manually manage music" on the screen for my iPod, since it had been in an automatic synching mode since the problem occurred.

Let us help Apple to find the moo Problem

Similar Messages

Maybe you are looking for