Let us solve this Verizon Service Quality debate for good

   Motorola Droid here.
    I don't frequent this forum too often, I probably glance at it once a week or so, but it doesn't take a regular visitor to take notice that this forum is always peppered with 3G complaints, some more or less valid than others. However, after reading through a couple different threads tonight I'm afraid I'm going to have to hop on the bandwagon and question my 3G speeds.
     First off, I saw somebody say that 90-100 dBM isn't very good. I am always stuck at around 98 dBm in my home though, and when I'm out and about I find it never gets below the high 80s. Is this normal? Also in my Settings>About Phone>Status menu, it constantly says I am on an "Network Unknown." This occurs and remains constant despite any combination of settings, including  roaming being on or off, and whether or not I am on 3G, 1X, or WiFi.
     Speaking of WiFi...when I am at home I use my home router as opposed to 3G for obvious reasons, which is a NETGEAR N router, yet I still only average about 2.5 mbps when connected to it or any wifi elsewhere. Yes, I have tried turning my routers security off, and yes, I do have it in b/g mode. I have also done the 228 number thing, the disabling of voice privacy suggestion, turning roaming on/off, several factory resets, etc.
    Basically I'm just curious to know if anybody else is having similar issues, and what your average speeds are. Infact, I'm going to make a little form below this paragraph for anyone who is interested, and rename the title of this post. Perhaps we can congregate enough responses to come up with an average and then determine whether we are receiving acceptable service or not:
Phone model:________
What is your...
     Average 3G download speed? _____dBm
     Average WiFi download speed? _____dBm
    Any other comments that are pertinent___________

first...how do i check my signal and speed? do i NEED an app or is there somewhere on the phone to do this? (i've seen others talk about 85-95 dBM, but never knew how to check). let me know and i'll post the results.
also, one other thing you can try....and i MUST stress that i know little about this, except that it seemed to have improved my quality (voice/sound....my phone sounded "muffled" on both ends) on both ends, but i'm not sure if it actually increased my signal strength?
call ##778
select "edit mode"
enter the password: 000000
go into the "cdma settings"
change home page," "home orig," and "roam orig" from evrc to evrc-b
hit menu and "commit modifications."
from what i gather, evrc-b is better technology, but is not supported everywhere. so if you try this and your signal is worse (or gone) then you'll need to follow the steps to switch it back. you will also want to save these instructions to your phone in case you find yourself somewhere that appears to be getting poor or no signal, so you can switch it back.

Similar Messages

This window service has timer for update record once in a day at 5 pm.

Hi Guys Please help me.
Actully i create a window service. This window service has timer for update record once in a day at 5 pm.
I have write a code but it is not working fin
Here is my code.
App.Config File:-
<appSettings>
<add key="IsTrace" value="YES"/>
<add key="SourceServerPath" value="Server=DATASERVER\SQL2008R2;database=WDSBHN;User ID=Wireless;pwd=chetu@123"/>
<add key="ArchiveServerPath" value="Server=CHETUIWK091\SQL2008R2;database=Demo;User ID=sa;pwd=Chetu@123"/>
<add key="ReportHour" value="22"/>
<add key="ReportMinut" value="01"/>
<add key="ReportSecond" value="20"/>
<add key="ReportMilisecond" value="230"/>
<add key="DailyTimer" value="tmrProductionDataTransfer"/>
<add key="MonthlyTimer" value="tmrProductionCleanUp"/>
<add key="ActionParameter" value="WDS-DataTransfer"/>
</appSettings>
Vb.Net Code:-
Protected Overrides Sub OnStart(ByVal args() As String)
' Add code here to start your service. This method should set things
' in motion so your service can do its work.
Try
LoggingTracing.WriteTrace("DataTransfer Service START " & Now.ToLongDateString & " " & Now.ToLongTimeString())
'***Get the Time of service run
Dim svcRunTime As System.DateTime = Configuration.ConfigurationManager.AppSettings("ServiceRunTime")
'***differance of these two time
Dim ts As TimeSpan = DateTime.Now.Subtract(svcRunTime)
'***production data transfer
tmrProductionDataTransfer.Enabled = True
tmrProductionDataTransfer.Interval = 1000
tmrProductionDataTransfer.Start()
Catch ex As Exception
LoggingTracing.WriteError(ex.ToString())
End Try
End Sub
Private Sub tmrProductionDataTransfer_Elapsed(sender As Object, e As Timers.ElapsedEventArgs) Handles tmrProductionDataTransfer.Elapsed
Try
Dim time As Date = Date.Now
Dim currHour As Integer
Dim currMinute As Integer
Dim currnSecond As Integer
Dim reportHour As Integer
Dim reportMinute As Integer
Dim reportSecond As Integer
Dim reportMiliSecond As Integer
Dim actionParameter As String = Configuration.ConfigurationManager.AppSettings("ActionParameter")
Dim actionTimerName As String = Configuration.ConfigurationManager.AppSettings("DailyTimer")
currHour = time.Hour
currMinute = time.Minute
currnSecond = time.Second
reportHour = Convert.ToInt32(Configuration.ConfigurationManager.AppSettings("ReportHour"))
reportMinute = Convert.ToInt32(Configuration.ConfigurationManager.AppSettings("ReportMinut"))
reportSecond = Convert.ToInt32(Configuration.ConfigurationManager.AppSettings("ReportSecond"))
reportMiliSecond = Convert.ToInt32(Configuration.ConfigurationManager.AppSettings("ReportMilisecond"))
If currHour = reportHour AndAlso currMinute = reportMinute AndAlso currnSecond = reportSecond Then
ObjProductionDataTransfer.CopyDataToArchiveServerDayWiseDL(Configuration.ConfigurationManager.AppSettings("SourceServerPath"), Configuration.ConfigurationManager.AppSettings("ArchiveServerPath"),
actionTimerName, time, actionParameter)
End If
Catch ex As Exception
LoggingTracing.WriteError(ex.ToString())
End Try
End Sub
It is running at 5 pm , but run 3 times, for that records has updated 3 time
How i can resolve it, If any problem in this code please give me the write direction or code. And this thing i have been searching for 3 days , but stile i didn't get any solution
sonesh

Sonesh,
Sorry but you have posted to a forum that deals exclusively with questions/issues about customizing and programming Microsoft Project, a planning and scheduling application. I suggest you delete this post and find a more appropriate forum.
John

Quality Certificate for Goods Receipt - FAIR

Hi Guys,
I’m after some advice with regards to the QM module.
We implemented QM last year to support our incoming inspection process flow.
The following dynamic rules were created via TCODE QDR1
Z01       Inspection Always
Z02       3 Inspections Plus Annual
Z03       One Off Inspection
In the material master we have actived the inspection type 01.
Next steps:
Quality Certificate for Goods Receipt
We would like to set the certification flag to identify that a first article inspection report (FAIR) is required from goods externally procured.
Today all vendors are required to provide a FAIR with the 1st off receipt for a new material or items which have not been delivered for more than 12mths.
Is it possible to set/create much a rule in QM for the 1st del to be flagged certificate required?
My initial thoughts were
1. To setup quality information records for each material + vendor with the certificate “FAIR”.
2. Then create and assign an inspection plan for the first off delivery.
Problems I can see,
1.     The certificate is only required for the first delivery regardless if the material requires a 2nd 3rd or 4th del to be inspected
2.     How to apply the settings and reset them when a FAIR requirement (Annual)
3.     Creation of this rule would have to accommodate the current QM rules not impact?
Has anyone implement certifications in this way or could they suggest a way it could be managed.
Many Thanks
Paul

Hi Craig,
First thanks for the information on DMR this has solved the problem.
I do have a second question if you could it would be appreciated.
Can you change the QM control key for a PO.
In the material master I've activate QM with control key 0000 no certificate required
After raising a PO a change note is then released under this circumstances the vendors are required to provide a certificate with the PO.
To mange this I would like to change the control key in the PO - I get the error message.
Control key Z001 cannot be used here
Message no. ME554
Diagnosis
You wish to change the control key for quality management in procurement. Only the following changes are allowed:
Set current control key from material
Set existing control key of item 0000
Procedure
Is it possible to change the key at direct in the PO?
Thanks
Paul

[nForce] Lets solve this 1394 problem once and for all.

Hi guys,
For the past 3months I have been trying to connect my Panasonic GS150 to my comuter in order to use Avid dvxpress pro. I have the problem of when I connect the camera to the computer, nothing happens. I also have this problem with my Ipod, however testing various different devices with the computer produces a strange outcome. Various different cameras work, xp pops up witha found new hardware device (like it should). Its very strange.
I started to think it was my system. I changed my onboard firewire to a pci card, same solution. So then, i reinstalled windows, same outcome. So i bought a new motherboard nforce2 platinum and to my total amazment, same problem. If was after i had totally failed in finding the solution that i started to look elsewhere on the net for anyone who knows the answer. It seems to be a VIA firewire chipset problem. Every post of people who had similiar problems where looking for the answer but NOONE has solved it, ive come across about 1000 posts with no reply's. Its a problem that thousands have but not many people ever use ther're firewire ports so they dont they've got the problem.
I really dont know what the problem is anymore, is it windows, is it certain 1394 devices, or is it the Via chipset. I havent a clue, so if anyone wants to attempt to solve this problem once and forall they will be the hero of about 3000 potential customers...
Anyone?
Jon.

Yes thats correct. Regardless of the hardware, and various 1394 devices are recognised. I've bought a 4pin to 4pin cable which i will test with different devices to see if they are consistent with a 6pin to 4pin cable, it may be a power issue. Not sure what chip on pci card, heres the info from website.
- Three external 6-pin FireWire ports
- Interoperable with existing, as well as older, 1394 consumer electronics and peripheral products
- Complies with OHCI requirements
- Compliant with IEEE 1394a-2000 standard
- Isochronous transfer support (guaranteed bandwidth) for DV video data transfer from Camcorder to PC
- Provides three fully compliant cable ports, each supporting 400Mbits/sec, 200Mbits/sec and 100Mbits/sec traffic
- Plug and Play & Hot-Swappable for all ports
- Power overload and protection failure on each port
- PCI bus master with PCI 2.2 Bus specification

Swap to lion finder kaput any answers to solve this problem. very expensive tool for this kind of error

any easy way to solve this problem and please dont give me answers like I WAS A SUPER CYBER

SORRY HELLO TO ALL HUGS AND KISSES

Let's solve this kernel panic :)

OK here it is, just the facts.
Imac Intel slot-loading 20” Flatpanel, exactly as I bought it 2yrs ago from applestore(haven’t touched any RAM or ever opened the computer)
Safari 10.4.1x (recently downloaded the most recent updates)
No backups, so I cannot Erase and Reinstall, my son’s pictures are on here. Save your flames for someone else.
I was running a disk-burning utility and the Itunes cover art screensaver was on (the screensaver being my most probable suspect for crash because of its documented bugginess, but the cause is moot for me at this point.) I came back to my mac to check the progress and the screen was frozen on the screensaver (I want to note that the hue of the screensaver was pinkish as opposed to the actual color of the “album covers”, a not too subtle hint that somethin’ ain’t right) At this point nothing worked but a hard shutdown by holding the power button. Upon restart, kernel panic. Sigh
After several days of reading forums I present to you my not so unique, but as of yet unsolved problem, and a list of what I have tried unsuccessfully to do to resolve it. I am pasting this in several forums hoping to resolve it so you can search if someone does come up with a solution. Pardon me if I mix up cmd, option, ctrl, and alt…I am using a PC keyboard. I know what keys to press through trial and error at this point, I just don’t know what they’re called on macs :P ..
-zapped PRAM, take note a mac “compatible” keyboard is needed for this (Logitech g15 doesn’t work for this task, but the cheapie Logitech “Classic”200 does, focus on the problem people)
-C after startup to boot Installation disk and running Disk utility/Repair Disk gives error
Checking HFSPlus volume
/red catalog file entry not found for extent
Volume check failed
Error: The underlying task reported failure
Techtool Deluxe showed error in repairing the volume and directory tests, the rest passed
The partition which previously held Windows and has now been erased and formatted in an unsuccessfull attempt to install a copy of OSX onto reports as “no problems detected”: Attempts to erase this partition and install OSX onto it result in errors
-Shift(safe mode) gives kernel panic
-cmd/alt-O/F Firmware boot gives kernel panic
-T at startup makes a target disk I guess but since I don’t have several mac computers laying around this isn’t a viable option atm
-cmd/V (Verbose mode) loads the info below and stops
-cmd /S (Single User Mode) does the same as verbose mode, I am unable to type at the prompt, it is essentially frozen at the end
-Option at startup only gives kernel panic
-Archive and Reinstall-The main hard drive won’t mount so it seems all I will be able to do is erase that partition
- I think I covered all of them, If I missed something, it didn’t help, either :P
-I tried a brief attempt at giving myself a crash course in terminal bash commands, but decided to do this before I rack my brain over that (as a last resort I will learn to program another **** language that will become useless in a few years before I erase my son’s pictures)…..the terminal is the only place I could run a fsck but it just returns the next prompt, no sign that it did anything,
-I have heard that occasionally some people’s KP’s “resolve themselves”. I am not sure if this is while the panic screen is showing or just on a successive reboot. I would love for that to happen here. That would be BCS(Best Case Scenario)
Following is what appears when I start in Verbose or Single-user mode
Se .Looking for kernel cache file ‘System\Library\Caches\com.apple.kernelcahes\kernelcache.BC122279…………………………………… …………………<then pause for 30-45sec, then “finishes quickly with script below which goes too quick for me to read>
Loading mach kernel?
Read error (hexadecimal#)
………………………………………………………………………………………………root device uuid?
loading drivers?
<next screen>
I will just put some of the stuff here that might describe an error, and some stuff to give you an idea where it comes in –the hexadecimal numbers(hex)
Started CPU 01
BSM auditing present
Disabled
Rooting via boot-uuid from/chosen:
Waiting on <dict ID=”0”><key>IOProviderClass</key>…yadayadayada
USB caused wake event (EHCI)
Firewire…yada
Got Boot device = yadayada
BSD root
CSRHIDTransitionDriver::probe: -v (I am assuming that this is where it picks up my input to enter Verbose mode)
CSRHIDTransitionDriver::start before command (single user mode prints “probe booting in single-user... do not match then skips the next two lines)
CSRTransitionDriver::stop
IOBluetoothController::start Idle Timer Stopped
Disk0s2: Hex# (Undefined).
Disk0s2: Hex#(Undefined).
Disk0s2:data underrun.
Pid 1 exited (signal 0,exit 1)panic(cpu 1 caller hex#): init died
State at last exception:
Debugger called: <panic>
Backtrace, Format – Frame : Return address (4 potential args on stack)
Hex# :Hex# more hex #’s No mapping exists for frame pointer
Backtrace terminated – invalid frame pointer 0xbffff968
Kernel version yada yada yada
That’s it. Same happens in single-user mode. The cursor stops and I have to restart.
I can access the original install disc and suspect that if I can delete the cache files, or preference files, or whatever is pointing the boot sequence to the corrupted info I would be okay
*okay this is new, after clicking restart from “startup disk” on Installation disk I was holding down shift to try a safe boot again, and as the Kp screen came down there was text on the screen
panic(cpu 0 caller 0x00399CA3) : Unable to find driver for this platform: “ACPI”.
Debugger…yada yada invalid frame pointer 0x0
It seems if I choose to use the install disks option to startup to the install disk then I can properly boot into single user mode in which fsck does work but it checks the install disk and not the HD, any way to switch that? is the HD "mounted at this point?

Well, either way you will probably be spending a little money and more time on
the Mac project; the difference in buying a relatively inexpensive external FW
HDD and learning how to use it (and have it for backups and doing your own
tech work) -- or -- not having it, and paying someone who does have those tools
on-hand, is you won't have the hardware or ability to backup your stuff, or fix it.
You can get a good FW enclosed backup hard disk drive of reliable quality
from Other World Computing and use free Carbon Copy Cloner. You have
the computer's bootable install disc with its own Disk Utility & tools in it.
I like my LaCie 250GB FireWire externally enclosed (self contained including
a separate power supply; it can boot and run my Macs from clones I made)
and there is room enough for more than two complete computer content clones.
Bootable exact images of the entire contents of the machines.
Had I paid for a tech to do the troubleshooting (48 hours at a time, for three
months) on the one Mac, there is no way I could have afforded the computer
or the tech bill. And I found out things through doing for myself that my friends
who use Windows machines (and they take them apart, and curse them) don't
yet understand. The cure for the few Mac issues outside of some large part
failure, is to be self-sufficient in the things a user CAN do. Then the shop visit
is a rarer event, and money spent on hardware is better than on gasoline.
Gasoline here varies, on the road system from over $4 a gallon (near $5 diesel)
up to nearly $7-$9 a gallon where fuels are barged or air flown in. Think about that
when or if you eat any salmon caught in Alaskan waters... Most of the fleet is
sitting in the docks, so driving in a modern city is a matter of greater efficiency
and foresight. You could take a chance on that $1200. hydrogen cell kit's claims!
Good luck & happy computing!
PS: are you sure that you didn't spring for that AppleCare extended protection plan
back in the first year of ownership where it could have cost you maybe $160. and
added up to three years of extra coverage and tech support? If you did an enrolled it
then it would be a matter of getting the computer to an authorized shop for service.
edited.

Please help...I can't solve this web services error (ConfigException)

Hi
I've got the following error when I try to build document-oriented web services
[clientgen] Generating client jar for WLWSSEApp.ear(SimpleService) ...
[clientgen] weblogic.webservice.server.ConfigException: Could not add parameter
to operation. You must specify either its Java or XML type.
[clientgen] at weblogic.webservice.server.WebServiceFactory.addPart(WebServi
ceFactory.java:1258)
[clientgen] at weblogic.webservice.server.WebServiceFactory.addParamsToMetho
d(WebServiceFactory.java:1211)
[clientgen] at weblogic.webservice.server.WebServiceFactory.registerOperatio
n(WebServiceFactory.java:798)
[clientgen] at weblogic.webservice.server.WebServiceFactory.initOperations(W
ebServiceFactory.java:633)
[clientgen] at weblogic.webservice.server.WebServiceFactory.createFromMBean(
WebServiceFactory.java:220)
[clientgen] at weblogic.webservice.tools.build.internal.WSDLGenImpl.getWebSe
rviceRuntime(WSDLGenImpl.java:240)
[clientgen] at weblogic.webservice.tools.build.internal.WSDLGenImpl.run(WSDL
GenImpl.java:135)
[clientgen] at weblogic.webservice.tools.build.internal.ClientGenImpl.doClie
ntGenFromEAR(ClientGenImpl.java:438)
[clientgen] at weblogic.webservice.tools.build.internal.ClientGenImpl.run(Cl
ientGenImpl.java:345)
[clientgen] at weblogic.ant.taskdefs.webservices.clientgen.ClientGenTask.doC
lientGen(ClientGenTask.java:351)
[clientgen] at weblogic.ant.taskdefs.webservices.clientgen.ClientGenTask.exe
cute(ClientGenTask.java:208)
[clientgen] at org.apache.tools.ant.Task.perform(Task.java:341)
[clientgen] at org.apache.tools.ant.Target.execute(Target.java:309)
[clientgen] at org.apache.tools.ant.Target.performTasks(Target.java:336)
[clientgen] at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
[clientgen] at org.apache.tools.ant.Project.executeTargets(Project.java:1255
[clientgen] at org.apache.tools.ant.Main.runBuild(Main.java:609)
[clientgen] at org.apache.tools.ant.Main.start(Main.java:196)
[clientgen] at org.apache.tools.ant.Main.main(Main.java:235)
BUILD FAILED
file:C:/bea/user_projects/domains/examples/build_ws/build.xml:54: weblogic.webservice.tools.build.WSBuildException: Could not add parameter to operation. You mu
st specify either its Java or XML type. - with nested exception:
[weblogic.webservice.server.ConfigException: Could not add parameter to operatio
n. You must specify either its Java or XML type.]
My environment:
- JBuilder X
- Weblogic Platform 8.1
- Windows XP SP2
Here are my steps of implementing web services:
1. Write the Java code for the back-end components that make up the Web Service. Here's the method that handle the operation
public String testName(InputParam test) {
String inputName = test.getName();
System.out.println("Input name:"+inputName);
return "Hello "+inputName;
Here's InputParam:
public class InputParam {
private String name;
public InputParam() {
public String getName() {
return name;
public void setName(String name) {
this.name = name;
2. Since I use JBuilder X I configure everything including handlers chain through web services designers
3. Build project
If nothing goes wrong, I will get generated client jars and a war file with web-services.xml inside.
I have no problem when I implement RPC-style web services.
I got the above error when I implement Document-oriented web services, but
I have no problem when I use String as a parameter instead of InputParam class.
I tried to change some attributes that might be relevant but got no luck.
I've tried using clientgen command line as well but the result was the same.
Below are the guidelines for creating document-oriented web services from the BEA's document that I think I already followed
- The methods that implement each operation of the Web Service can have only one parameter. This single parameter can be of any supported data type. (The Weblogic web services toolkit support simple JavaBean, doesn't it?)
- The methods that implement each operation cannot use out and in-out parameters. (I'm not sure about this one since I got Holder classes after using clientgen. However, there's no <param> tag in web-services.xml.)
I found the old solution from support.bea.com (ID = S-25689), but I don't think my situation is the same. I got the error while building web services...not deploying a web service.
Any answers to this question will be very much appreciated.
George

Quote from: danknuggets11 on 22-December-06, 11:23:06
Reply, Should have mentioned this before, I can't even turn agp on. I go into SMARTGART it shows AGP off, Fastwrites off. If I move the AGP settings to 4x, 8x, it says I need to restart to apply. After the restart it just resets it back to off.
get Driver Cleaner and remove curently ATI Drivers.
reboot,
get and install chipset Drivers: http://download.msi.com.tw/support/dvr_exe/mbd_dvr/VIA4in1_MB.zip
reboot,
then get and install ATI Drivers: https://forum-en.msi.com/index.php?topic=102839.msg761297#msg761297

How could i solve this problem 'service battery with yellow triangle ' ?

<Image Edited by Host to Remove Personal Information>

If the battery is user-serviceable, then replace it with a new battery. If it isn't user-serviceable, then take it to your local Apple shop to have the battery replaced.

Why can I get unlimited Verizon Service at Walmart for $45 but not here?

I'm wondering if anyone knows why I can go down to Walmart and get a Verizon phone with unlimited internet, text and calling for $45 a month but when I go into a Verizon store I have to pay minimum $103 per month for a smaller service plan and then I also have to sign a ridiculous 2 year service agreement. Does anyone know why this is or should I ask the FTC? Please don't say it's because they give me a $600 phone for $100 because I just paid full price for an iPhone 5s.

Chipster - My grandpa has a Trac-fone; it's a (removed)! He can never figure out how to add minutes, which aren't cheap. Texts are deducted as minutes. He forgets to renew them, as they expire frequently if you don't buy a year's worth at one time. He has to get one of his kids to add his minutes for him; or, he wastes 3 hours going to Wal*Mart to have them do it! Tracfone, does however, send plenty of texts reminding you when your minutes expire; and, usage expiration does show up on the face of the phone. But, unless you're willing to put up with the hassle and expense, they do have a nice LG model. Depending on where you buy it (like HSN.com), you can get double minutes for life. Frankly, grandma and I like the paperless Verizon plan (she doesn't text), whereby the bill is the same, every month, and is paid for automatically; no muss - no fuss!
Comment edited as required by the Terms of Service.
Message was edited by: Admin Moderator

How to solve this "Prefix number: entry missing for system EC5 client 800"

Hi,
I am workflow learner, I am having theoretical knowledge on it.
Now, I started to practice practically in my IDES server.
I am getting an error message while I am trying to save my standard task with my object type and method and event (which were already created in SWO1).
My error message details.....
Prefix number: entry missing for system EC5 client 800
Message no. 5W023
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Even I tried to create on entry in the table T78NR, but as that is standard table, I am unable to make an entry.
Hope we have to configure the workflow, I am not having any Basis consultant with me. Can anyone help to cross this problem.
Thanks and Regards,
Surender Batlanki.
Edited by: Surender Batlanki on Oct 15, 2008 2:20 PM

HI Surender and Other SAP Work flow gurus
Surender, u said, that you got the solution.
As honestly speaking i am new to SAP Workflow. Can u please please guide me the instruction and document if any. I am practising in Test Server machine. I will be really happy that if u all GEMS helps me to get out of it.
in Prefix number OOW4, system is asking me to enter, the Prefix number, Interval start, Interval End, and Check Sum.
I entere the same 980 in prefix number, and i dont know what to enter the Interval start and interval end and check sum.
Also there is some msg coming when i tried to manage some values, " NO Intervals can be reserved for this prefix number" - MSg No: 5W179.
Please gurus help me.
Regard
Guru

Services quality by for mobile users

Hello Guys
I would like to share my feedback in the response to the problem faced by me with my Z1 mobile.
My mobile is under warranty period and it got problem with the display screen and I went to the support office of the care center and the response was very very very bad.
What they said was unprofessional and unethical as per the product and service provider of any mobile company.
I have changed my view for sony mobile after their response and I will suggest everyone not to buy any sony mobile in future.
Regards,
Neil.

Contact Xperia care about your issue http://www.sonymobile.com/global-en/support/contact-us/
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

How to solve ''This device isn't eligible for the requested build''

I wanted to downgrade my mom's iphone from ios 8 to 7. When I try to restore it this error message comes out. I heard it can be fixed by going to terminal and editing the ''gs.apple'' host file. But when I go in Terminal there's no file. I don't have it. What am I suppose to do?

I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
You may leave comments at Apple Feedback.

Let's put this to rest once and for all... IT or I.T?

wowitsdave wrote:Mark D. wrote:
slow day ?Lol - Guilty.
But seriously, I run a blog about IT career development and I'm trying to standardize the way I use it- with or without periods. Haha.If I was a betting man.. I would put my life savings on IT ending up as a landslide winner.

I couldn't find any answer on the Google, so...
Which way is Information Technology abbreviated?
Is it IT or I.T.?
Answer on Survey Monkey, then put your justification here in this thread.
This topic first appeared in the Spiceworks Community

Seriously, how can I fix this self assigned IP issue FOR GOOD!?

I've tried all the fixes that people have offered. Most work temporarily and then the issue occurs again. Why does this keep happening. It makes no sense that so many people seem to encounter this issue and apple still haven't found a simple solution. I'm running DHCP. I've tried to manually set an IP address within the lease pool and this doesn't work either. I mean, go figure. How, if I assign an IP to myself does my computer still not register my router. It's absolute nonsense. Can I state, PCS DON'T HAVE THIS PROBLEM! Does anyone know the root of this problem or a permanant fix? Is there something I'm missing? This has happened across two different networks now and without warning or reason. I mean, it's getting desperate. There's times I flat out have the urge to throw my laptop across the room. Thank you in advance and sorry about the rant. I'm frustrated.

If you are going to SET an IP, a Static IP, on the computer it has to be out of the DHCP pool range but in the overall IP range the router is using to hand out. So if the router DHCP range is 192.168.1.100 to .150 you have to assign a static IP to the computer either above the 150 or below the 100.
Right I've never had a problem with ha PC. But then I have never had a problem with my Mac either.
I suspect you have some type of hardware problem or a hardware and driver problem.

I'm unable to update iPhoto and iMovie since I downloaded Maverick. How can I solve this?

I have been trying to download iMovie (currently 10.0.4) and iPhoto (currently 9.5.1) but the Apple Store never lets me do so. I am currently outside the U.S., where I purchased my laptop and I wonder how can I solve this. Thanks in advance for any help!
Here are the error messages:
I don't have any other Apple ID.
This laptop only has one user, and the software was included in the original purchase (so, no refund possible).
I tried many times.

Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
Step 1
A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
Step 2
If you get the alert when trying to update a bundled iLife app, select the Purchases page in the App Store and locate the app in your purchase history. If there's a button marked ACCEPT on the right, click it.
If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
Step 3
If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
Step 4
From the App Store menu bar, select
Store ▹ View My Account
Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.

Let us solve this Verizon Service Quality debate for good

Similar Messages

Maybe you are looking for