Services quality by for mobile users

Hello Guys
I would like to share my feedback in the response to the problem faced by me with my Z1 mobile.
My mobile is under warranty period and it got problem with the display screen and I went to the support office of the care center and the response was very very very bad.
What they said was unprofessional and unethical as per the product and service provider of any mobile company.
I have changed my view for sony mobile after their response and I will suggest everyone not to buy any sony mobile in future.
Regards,
Neil.

Contact Xperia care about your issue http://www.sonymobile.com/global-en/support/contact-us/
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

Similar Messages

  • Look for: components used for Service Brokerage (CSB) for mobile networks

    I am looking for developers/company offering components used for Central Service Brokerage (CSB) for mobile networks. It aims to store consumer profiles and directs service requests (shopping, travel & meeting services, hospitality and insurance) from mobile consumers to connected retailers and appointed service providers.
    I would be higly interested in almost ready to use components/architecture which can be used in new service/start-up situation.

    Hey Anthony,
    Yes, a lot to read, thanks for reading though!
    For the External Web Services, since I have it set to fe-pool.domain.local right now, I figure this is as simple as flipping it to fe-pool.domain.com within Topology Builder | Enterprise Edition Front End Pools | Edit properties | Web services?
    After which, I assume I will need to create a new host A record for fe-pool.domain.com, pointing to the Pub IP 1.2.3.4 I have set up to forward directly onto my FE Server of 18.20? I am a bit of confused as to how this external web service is contacted,
    does the mobile app use lyncdiscover.domain.com to find this information? In other words, does the lyncdiscover allow the mobile app to get inside the topology, the topology reports to the mobile app that "Hey, fe-pool.domain.com is going to be your External
    web service as defined in the topology" ? If its just that easy this should be a quick change.
    As for your next question, on the F5 level I'm pretty certain it is just set to take any packets coming in from pub IP 1.2.3.4 : 80 or 8080, or 443, or 4443, to allow it to go to that FE server IP on any of those ports. I don't believe it is actually taking
    a 443 packet, and converting it into a 4443 destination. Also note, I am forcing lyncdiscover to use port 80, instead of 443 because I am unable to get a new pub cert with the lyncdiscover SAN.
    As for the domain user, it is simply just my single user and I am flipping the SIP domain in the control panel within the user properties. domain.com and domain.local are both configured SIP domains in my topology, however i have domain.com as the default.

  • CRES Registration for Mobile Users

    Currently, for mobile users using BCE mobile app, the registration with CRES service is a vey difficult task. Is there any plan on the roadmap to provide a mobile friendly interface to CRES portal via BCE?
    Thanks,
    John
    Sent from Cisco Technical Support iPad App

    An upcoming release will support tablet sized screens and landscape mode which will help with this.

  • OS X Server 4.0.3 Profile Manager Settings for Mobile Users problems

    OS X Yosemite 10.10.2 with Server 4.0.3
    We are using Profile Manager to control Settings for Mobile Users, and give homeSync to the users. Our problem is that the exclude / Skip items (Items matching any of the following will not sync" This setting is not working an example. I have put this folder to Skip Items ~/Downloads but the home Sync still Syncing items in the Downloads folder.
    I have this problem on all the 3 users/machines on that server. Every client is using os x 10.10.1 og 10.10.2 I have check that the profile from the server is on the client.
    Has any a solution to that?
    Regards
    Brian

    I have no solution but have experienced failing sync settings (quite often) in both 10.6 Server and 10.9 + Server 3 (upgraded from 10.6 Server) in the same way as you described, it syncs too much. We have given up on synched home folders and will cut them and use other backup methods since we’re not so dependant on switching between different devices. Our users usually have one computer, one iPhone, one iPad and stay with those until it’s time to exchange them.

  • Change home page for mobile user

    Is it possible to change safari home page for mobile user via script or locally? We have OD profile which is set to delete all data after logout.
    Also is it possible do automatic login for mobile user?
    thank you...

    Hi,
    From your description, my understanding is that you want to customize home page for different user.
    There are two methods to accomplish your requirement. You could
    create a webpart with code or a control the page that redirect to a new page based on the users or groups.
    Please refer to this article:
    https://social.msdn.microsoft.com/Forums/office/en-US/08a2b1fd-6951-4e70-ba03-7f546a337fbe/set-different-home-page-for-each-user?forum=sharepointgeneralprevious.
    Best Regards,
    Vincent Han
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Mutliple camera feeds, different qualities: How to reduce live stream quality for mobile users??

    My issue is I have multiple cameras from users and some are on mobile devices, so I want the mobile users to receive a different quality feed.
    I've tried using receiveVideoFPS to no avail (apparently H.264 can't / won't ever support this feature....)
    Can feeds be received differently so that if one users has an HD camera feed, the mobile guys not choking his connection and cpu trying to pull it down?
    Any help or ideas would be greatly appreciated.
    Thanks so much.

    1) any practical use of P2P multicast will have a delay measured in seconds. it shouldn't go to 30 seconds unless you have a large NetStream.bufferTime.
    2) i strongly recommend against changing the multicast stream parameters. they all interact with each other. decreasing the window duration will decrease the effective reliability of the stream, by reducing the amount of time to receive all of the fragments of the stream as they pass through the P2P group -- especially when people join or leave the group, which can disrupt the low latency "push" trees that are constructed in the group.
    3) you should be able to change the encoding parameters on the fly without a major disruption. are you using H.264 or Sorenson Spark?  it's possible that your camera doesn't like to have its capture size changed and it is freezing temporarily.  i'm not having any trouble changing the capture size with my camera (and using H.264).  i recall there being some issue with changing the frames-per-second on the fly (at least some time ago, and i don't remember what the issue is) -- there was enough of an issue that i disabled it in my little app while actively publishing.

  • Advice for Mobile Users

    This is my first time setting up SL Server, and I'm not sure the best way to proceed. I have a small workgroup of <25 client Macs for an elementary school. Each teacher will have a MacBook, there will be an iMac in each classroom, and a smattering of a few other iMacs and MacBook Pros. Every staff member needs an account, and then there will be a couple general-purpose accounts (a "student" account, etc.). For the per-person accounts, I'm thinking of using Mobile User accounts with Home sync so that if a teacher has to log into an iMac or another MacBook rather than her own, all of her files will be there. Along with using NetRestore for a few restore images, I think this would eliminate the need to run client backups over Time Machine service (I will of course need to backup these home sync stores).
    Is there another way I should be considering to set this up? The portables will be off campus regularly (possibly every night), so Network Homes won't work. I'm not full-time support — just a parent volunteer — so I want it to be easy for on-site staff to minimize uptime. I plan on training the administrative assistant so she can issue a teacher a replacement MacBook or help them log into the classroom iMac and then re-image the problematic machine if it's having some sort of trouble. I have one Mac mini server running the entire show. The wired network is all Gigabit, and all the AirPort hardware is the newest stuff, so wireless clients are all running N. I don't want to trust any of these users to know how to back up their files, but I also don't want to overtax the network or the one server.
    I know I'm asking more than one simple question, so if anyone rather than answer has links or suggestions of good resources I can read (printed or online) to help make this decision, that would be most helpful as well.

    There is a simple, but limited way to do this presently. Just export the xmp data. If they're RAWs, you'll get side cars, otherwise it will be embedded.
    When you copy the images to the RAID, copy the sidecars too and then import on the other system.
    The limitations are, you don't get:
    - History states
    - History snapshots
    - Stacks
    - Collections
    - Flags

  • 10.5.5 Active directory problem for mobile users

    I an running 10.5.5 on a MBP 2.4. The computer is attached to Active Directory for authentication. The accounted is setup as a mobile user with automatic home sync. Below is the problem I'm experiencing after 10.5.5.
    Upgrade worked fine, everything went through as expected. When I got home with computer, couldn't login. I did eventually get logged in, computer became extremely unresponsive at intermittent times.
    At work next day, everything worked fine.
    I believe this is a problem with 10.5.5 computers that are bound to AD, when AD is not available (but internet is.) Some type of weird priority locking or timeout setting? It seems to fail immediately if no network is available, but if the internet is available it is like it gets "hung" waiting for a response.
    Anybody else having similar problems?
    Below are the details on the specific tests that brought me to this conclusion.
    1) Boot with work network cable connected - Works fine
    2) Boot with work wifi network enabled - works fine
    3) Boot with public wifi network enabled and work cable - works fine.
    4) Boot with only public wifi - appears "frozen" (turned off after 5 minutes of trying to login)
    5) Boot without network or wifi - works fine using cached mobile account info
    6) Boot with network cable and public wifi, remove network cable after login- works fine for a period becomes periodically frozen. attempts to do anything become queued, when computer starts responding queue emptys out (can see menus / applications switch around to correspond with clicks.)
    7) Change account to Manual sync of mobile account, again boot with network cable and public wifi, remove network cable- no freezing responds normaly.
    All steps repeated after rebinding computer to AD - same results.

    First rule of installing an upgrade, run permissions repair both before & after. Did you do that?
    I'm using a Mac dual bound to AD & OD, works perfectly. I can't speak for the exact setup of your network but I personally would be suspicious of AD. I had a similar issue some time back where my processor would go crazy with the net directory authentication running like crazy. Turned out AD had somehow forgotten my computer. It only happened away from work where my Mac couldn't contact the AD server (not exactly sure why). I'd try the following.
    1. While at work create a local administrative account on your Mac (you should always have a backup account anyway).
    2. Login as local admin account.
    3. open Directory Utility from the Applications/Utilities folder & remove the AD server (you'll need an account that can bind machines to AD).
    4. re-add your Mac to AD.
    This may resolve your issue & shouldn't hurt anything in the least.

  • Can't change password for mobile user on certain client computers

    I have a MacBook Pro that has mobile user accounts. The user accounts are defined in the WGM of my macpro Server. The mobile user account works fine except that after some time I could not change the password on the client computer. I could change it in WGM but then it was not updated on the client. I tried changing the password from the SystemPreferences -> Accounts option as well as from the command line with "passwd". When using the command line passwd it just says "sorry". When using the Accounts option it asks to contact the "system manager".
    I called Apple Support. They suggested recreating the mobile user account on the client. I did that, and everything worked fine, including changing passwords on the client. But, after several weeks, I again cannot change the password on the client. I can change it in WGM fine, but again the client is not updated.
    It seems that the password database on the client gets confused about user password changing privileges after some time.
    To make matters more complicated, everything works fine for another client computer, including changing passwords.
    Any suggestions?

    This problem was related to the case sensitivity of computer names. I had recreated the LDAP binding to the client computer with the computer name in all lower case
    characters. However, when I created the mobile user initially, I had used a mix of upper and lower case characters (the name that shows up upon reverse DNS lookup). Once I re-created the LDAP binding with the original name, everthing worked fine.

  • Disable release flag in service entry sheet for specific users

    How can we disable the release flag for specific user/s in Service Entry Sheet(ML81N)?
    Can any one suggest?
    arjman

    Hi dear,
                In the ML81N T code, there is an object M_EINK_FRG Release code and code grp.
    leave it empty. and assign the Role to the user with whoom you dont want to release the SES.
    In this process the system will show you the green flag and also allow you to release the SES but when you will save it the system will give an Error Message about the Authorization.
    this will not allow the user to release the SES.
    Hope it Helps,
    Regards,
    Yawar Khan
    Edited by: 1234_abcd on Jan 21, 2011 12:40 PM

  • Let us solve this Verizon Service Quality debate for good

       Motorola Droid here.
         I don't frequent this forum too often, I probably glance at it once a week or so, but it doesn't take a regular visitor to take notice that this forum is always peppered with 3G complaints, some more or less valid than others.  However, after reading through a couple different threads tonight I'm afraid I'm going to have to hop on the bandwagon and question my 3G speeds.
         First off, I saw somebody say that 90-100 dBM isn't very good.  I am always stuck at around 98 dBm in my home though, and when I'm out and about I find it never gets below the high 80s.  Is this normal?  Also in my Settings>About Phone>Status menu, it constantly  says I am on an "Network Unknown."  This occurs and remains constant despite any combination of settings, including  roaming being on or off, and whether or not I am on 3G, 1X, or WiFi.
         Speaking of WiFi...when I am at home I use my home router as opposed to 3G for obvious reasons, which is a NETGEAR N router, yet I still only average about 2.5 mbps when connected to it or any wifi elsewhere.  Yes, I have tried turning my routers security off, and yes, I do have it in b/g mode.  I have also done the 228 number thing, the disabling of voice privacy suggestion, turning roaming on/off, several factory resets, etc. 
        Basically I'm just curious to know if anybody else is having similar issues, and what your average speeds are.  Infact, I'm going to make a little form below this paragraph for anyone who is interested, and rename the title of this post.  Perhaps we can congregate enough responses to come up with an average and then determine whether we are receiving acceptable service or not:
    Phone model:________
    What is your...
         Average 3G download speed? _____dBm
         Average WiFi download speed? _____dBm
        Any other comments that are pertinent___________

    first...how do i check my signal and speed? do i NEED an app or is there somewhere on the phone to do this? (i've seen others talk about 85-95 dBM, but never knew how to check). let me know and i'll post the results.
    also, one other thing you can try....and i MUST stress that i know little about this, except that it seemed to have improved my quality (voice/sound....my phone sounded "muffled" on both ends) on both ends, but i'm not sure if it actually increased my signal strength?
    call ##778
    select "edit mode"
    enter the password: 000000
    go into the "cdma settings"
    change home page,"  "home orig," and  "roam orig"  from evrc to evrc-b
    hit menu and "commit modifications."
    from what i gather, evrc-b is better technology, but is not supported everywhere. so if you try this and your signal is worse (or gone) then you'll need to follow the steps to switch it back. you will also want to save these instructions to your phone in case you find yourself somewhere that appears to be getting poor or no signal, so you can switch it back.

  • How can I manage new Firefox for Mac on my network. Control users Home Pages for Mobile User Accounts.

    I am running Mac Computers in a School. Current Mountain Lions OS and current Firefox Browser. We log in using mobile accounts. How can we manage Firefox so all users get the same home page and settings.
    If I can do locally or through a profile, that would be great

    hello, you could use the mozilla.cfg file in the firefox program folder in order to lock or set certain preferences - here is some general information on how to set that up: http://kb.mozillazine.org/Locking_preferences
    and specific guide to set the homepage can be found here: http://mike.kaply.com/2012/08/29/setting-the-default-firefox-homepage-with-autoconfig/ (this blog also contains may other helpful resources for deploying firefox)

  • Form service not available for few users

    Dear all,
    we have nearly 500 users connected to Oracle App server 9i Release " ".
    We have a main form called "main.fmx" .
    In middle of the day a change my "main.fmx".
    As user are connected i cannot replace it.
    So what i do is
    1) I first rename the "main.fmx" on application server to main_1.fmx" which it allows to do on application server.
    2) Copy the modified "main.fmx" directly to application server.
    What we observed is all the users which were connected before renaming where able to acceses all the options of "Main.fmx" .
    The user which logged in after the file was rename were getting following error :
    1) "FRM-92050 : Failed to connect to the server : webdb-01:9001".
    Kindly let me know what is the problem.
    Thanking you in anticipation.
    Regards,
    Devendra

    the app-server did let you delete the file, because the OAS did need the file.
    when you use this trick - then don't ask yourself, why the OAS has a problem after the rename and ...
    it's easier to find out, which user are actually using this form and shut down this users. After that you can overwrite the file and no problems will occur.
    I have created a technique, in which each form stores the actual form-name in the session-environment. So I can look in the database-sessions which users are connected, and which forms they are working in - actually.
    Then you can email them to leave the form and after that you can do the copy
    try it
    Gerd

  • R12 KB remove 'Create Service Request' Button for Guest user

    We are running Oracle eBusiness 12.1.3
    Whenever someone is not logged in and visits our KB they are of course logged in as GUEST.
    Currently when viewing a KB solution there is a button that says Create Service Request.
    We are looking to remove/hide that button from this page, what is the profile option to do this?
    Thank you

    Have you tried to use personalization? -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Personalization+AND+Hide+AND+button&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Mobile user can't log in

    Hello,
    I have an issue with mobile users. I have a Mac OS X server set up with OD. I have created mobile user profiles on it. Those profiles can log in to the server without issues.
    Yet, I can't log on to any other mac on my network with those mobile users. If I try using the graphical interface, I get a login failed message, with the following error in the system.log file.
    Aug 19 06:08:58 macbook edu.mit.Kerberos.CCacheServer[1162]: launchctl start error: No such process
    Aug 19 06:08:59 macbook sshd[1184]: afp home directory mount failed in theEnumerator->Count in AFP_OpenSession: status = Unknown error: -5023
    Aug 19 06:08:59 macbook edu.mit.Kerberos.CCacheServer[1162]: launchctl start error: No such process
    Can anyone help me out ?
    Peter

    Hi
    +"is there anyway for mobile users to be admins of the local machine when they are offline?"+
    Yes. System Preferences > Accounts > Select the Network Account. Click the lock to authenticate. Provide the local admin name and password. Tick the "Allow user to administer this computer" box. Logout and Login. Doing it this way reliably works for me every time. Train/Teach the user how to use the Sync options. Try not to sync everything. Avoid the Pictures folder if you can especially if there are large iPhoto libraries. Same for Movies folder. For offline users works best if they manually sync. Less problems that way.
    +"in the Directory Utility was that it mounted my AD specified home directory in the dock"+
    Apply a Dock MCX for that User or Group. Does not have to be a persistent setting. Once allows for additional user configuration. Under the "Add other folders" section tick the "Network Home" option. There are other ways of doing this but that should do it.
    HTH?
    Tony

Maybe you are looking for