Level 2 Funcitionally Dependent and Not Consistent
I'm trying to create a dimension table but get the following error when i try to add a child dimension:
BUSINESS MODEL CCCi PS Fin Analyitcs:
[nQSError: 15001] Could not load navigation space for subject area CCCi PS Fin Analyitcs.
[nQSError: 15019] Table PeopleSoft FIN Tree Node Hierarchy is functionally dependent upon level Node Level 1 Hierarchy, but a more detailed child level has associated columns from that same table or a more detailed table.
Here is the situation. I have a single physical table (Table A) that contains data that makes up a hierarchy. Here are the key fields: (1) Node Name, (2) Node Level (1 high - 9 low), and (3) Parent Node Name. I want to create a dimension that allows me to drill down from level 1 to level 9 for node details. Initially I've tried to set this up to just drill down from level 1 to level 2.
What I've done:
(1) Created two aliases for Table A: 1A and 1B in the Physical Layer
(2) Created a complex join between Tables 1A and 1B where Parent Node Name of 1B = Node Name of 1A and 1B Node Level = 2.
(3) Created a Logical table and moved the three fields (from above) from table 1A to the logical table.
(4) In the logical table source I added the 1B table as a new table and joined it to 1A using a Left Outer join
(5) Added 3 columns from 1B to logical table
(6) Selected create dimension from the logical table
This created a dimension with the 3 fields (total of 6) from 1A and 1B on the first level. I do a Check Consistency at it passes. However, i really want the 3 fields from 1B to be on a child dimension.
(7) I create a child dimension and drag the 3 fields on level 1 from 1B to level 2 (the child level).
(8) Check consistency and i get the message from above.
I'm not sure why i cannot do this. If you can help solve this or provide an alternative solution it would be helpful.
Thanks...
I think the key's are a potential error but am not sure that a clearly understand how to do this. Here is what i have:
1) When I copied the columns from the first physical table (Table 1A) over to the logical table it created the keys Node Name and Node Level no the Logical table in the Business Model.
2) When I copied the columns from the second physical table (Table 1B) over to the logical table it did not create these as keys on the logical table in the Business Model. It just created them as columns.
3) When I created the first level of the dimension table I created a key for only the Table Name since that is what i want to be able to drill down on. This pass consistency verification.
4) When I created the second level of the dimension table I created a key from the second node name field (from the second physical table) on the logical table. This is part of the key on the physical table but is not part of the key on the logical table. This is when it fails consistency.
I'm not sure how to arrange these keys to meet what you suggested.
Thanks...
Similar Messages
-
Is PaperSize set in the Report Design Machine Dependent and not Universal?
Hello
I have been having a problem with setting a Custom Paper size in CR2010 for Visual Studio 2010 VB Net and in the solution that I found, the author says that
The fact is that crystal report save the information of the format of a report in a non-portable way!
It saves the "ID" of the format instead of his "Name"!
The problem is that in Windows this ID is machine dependent.
I created a Paper size for C6 envelopes, and used that Paper size name when I created a report. But whatever settings I used for setting PaperSize at runtime, the Report printed on the Default Paper size for the printer which in my case is A4.
Using this code
Dim doctoprint As New System.Drawing.Printing.PrintDocument()
doctoprint.PrinterSettings.PrinterName = "YourPrinterName" '(ex. "Epson SQ-1170 ESC/P 2")
For i = 0 To doctoprint.PrinterSettings.PaperSizes.Count - 1
Dim rawKind As Integer
If doctoprint.PrinterSettings.PaperSizes(i).PaperName = "MyCustomFormatName" Then
rawKind = CInt(doctoprint.PrinterSettings.PaperSizes(i).GetType().GetField("kind", Reflection.BindingFlags.Instance Or Reflection.BindingFlags.NonPublic).GetValue(doctoprint.PrinterSettings.PaperSizes(i)))
oRpt.PrintOptions.PaperSize = rawKind
Exit For
End If
Next
from Stefano on http://social.msdn.microsoft.com/Forums/en/vscrystalreports/thread/e16a1630-ad0c-4fda-8351-16e0807072eb I have been able to print on the custom Paper Size Option that I had created
My question is, if I am making a report which is going to be used by other users on different computers, do I need to use the code to find the correct paper size ID on the Users computer for all paper sizes, both standard sizes and custom sizes?
For example will myReportDocument.PrintOptions.PaperSize = PaperSize.PaperA4 in the code not work on another users computer if their printer has a Default paper size of Letter? Will I need to use the above code example to find the paper size ID for the user's machine?
Thank youHello Ludek
Thank you for the reply
Not the same query - the two links to the two questions you listed were how to overcome the problem of making the report print using a custom size
In finding a solution to that, the suggestion was made that the PaperSize stored by the Report is a machne dependent ID - if that is the case then is it correct that when the report is used on a different computer by another user, that the Paper ID size stored by the Report will not work for the second computer and that I need to include code to find the second users Paper ID that matches the paper size that the report requires even for standard paper sizes?
I understand that custom papersizes may require code to find the Machine Paper ID, but am now not sure if the problem arises for all paper sizes when the report is used on third party computers
Regards
David -
On my iphone 4S (and on my older 3Gs), i've noticed that sound effect levels (email alerts, SMS alerts, screen locking) are not consistent. Sometimes they are louder than other times, and sometimes they're not happening at all. I've got the volume up all the way too.
anyone else?Turn on Sound Check.
Run iVolume.
That's all there is to it.
*Can anyone tell me if I can run iVolume even though iTunes does not seem to adjust the volume using sound check.*
iVolume is an application itself. It integrates with iTunes a bit it does not alter iTunes at all. It simply analyzes the sound file and stores the info in the sound file.
Run iVolume on some songs, then turn Sound Check On and Off.
If they sound different, it works.
Not all songs will change a lot. -
Results row shown only at the bottom and not at each value level
Dear Experts
I have a report based on a multiprovider consisting infosets and a cube.
There are several row characteristics shown. 1 of these were set to show results row. But the results row is not shown at each value level but at across all its characteristics level, ie. at the bottom of this characteristic. So, only 1 results row shown and not 1 results row per each value of this characteristic.
Some other characteristics are showing multiple rows of results rows but at a certain grouping level and also not at per value level.
Please advise what could be the cause.
regards
PascalDear Experts
Solved.
Due to the concept works like this:
To see results row for a characteristic, must set it to the char infront, not to the char itself.
But then when user re-arranges the position of the row chars, there could be an issue.
Is this a constraint of BEx?
regards
Pascal -
Delivery address at Item Level and not at the Header Level
Hello Experts,
We are facing an issue as described below:-
We are in SRM 7.0 using classic scenario.
After approval of multi line Shopping Cart in SRM ,PR's are getting
automatically created in backend R/3 system.After converting PR's into
POs in backend R/3,we are observing that the delivery address for these
PO'are getting printed at Item level and not at the Header Level
inspite of the delivery address being same for all the Item level.
As desired,the delivery address in the PO's should have the delivery
address at the header level if the the delivery address is identical
for all the Item Levels.
However,if we create a PR directly in R/3 system and then convert these
PR's into PO's in the backend R/3 system,we find that the deliver
address are getting printed at the Header Level if the delivery address
is same for all the item level(which is as desired)
Any pointers will be highly appreciated.
Thanks & Regards,
RKSIt is standard process only.
In Po delivery address is maintained at item level because to which address perticular material to be delivered,
this may change from material to material or may not change -
Making vendor down payment at PO header level and not item level
Hi
I am making downpayment to vendor. I am using new functionality in EHP 4 for making downpayment through purchase order. When I run ME2DP for making downpayment, it asks for PO item number also.
But my requirement is to pay downpayment at PO header level and not PO item level.
Please let me know how can I do payment at PO header level.Dear All,
I am also facing the same problem. Though Advance is maintained in PO Header Level when we are trying to create DP Request / DP system is asking line item mandatory. Suppose i have 2 line items and maintain all the DP amount in first line item. I am making service entry for 2nd line item and bill for the second line item. Then in this case, the Down Payment clearing tab doesn't appear in MIRO. That means I am unable to adjust the advance for the line item though I have to adjust it.
Problem is that there are more than 300 lines items in PO/WO. Hence it becomes difficult to maintain advance for each line or the user is forced to maintain certain amount in line item..
Please help ..Its urgent
Regards,
Ganesh -
Validation at View Object level and not Enity Object
How would you create validation logic at the view object level and not at the entity object level? I have many VOs that reference the same EO and want some validation logic to be applied only to certain VOs.
Thanks,
QuocMy use case for this is to perform form validation inputted by the user via a JSPX page.
-
Dear all,
Could you kindly let me what's the reason that cause S_ALR_87012168 and S_ALR_87012167 is not consistent with FBL5N.
When view line item anlaysis the line item is the same with FBL5N, but in the first page of due / not due anlysi, the result is not the same?
Thanks bnd Best Regards.
CSY.Hello
first thing you should do it is to run the programm SAPF190 if you don't activate NewLedger or TFC_COMPARE_VZ if new ledger is on.
These programms will check the index of the data and compare the amount between index and BSEG/FAGLFLEXA table.
Second point, do you check the analysis with all same option ?
Best regards
Philippe -
Delivery address appearing at Item level and not at Header level in PO
Hello Experts,
We are facing an issue as described below:-
We are in SRM 7.0 using classic scenario.
After approval of multi line Shopping Cart in SRM ,PR's are getting
automatically created in backend R/3 system.After converting PR's into
POs in backend R/3,we are observing that the delivery address for these
PO'are getting printed at Item level and not at the Header Level
inspite of the delivery address being same for all the Item level.
As desired,the delivery address in the PO's should have the delivery
address at the header level if the the delivery address is identical
for all the Item Levels.
However,if we create a PR directly in R/3 system and then convert these
PR's into PO's in the backend R/3 system,we find that the deliver
address are getting printed at the Header Level if the delivery address
is same for all the item level(which is as desired)
Any pointers will be highly appreciated.
Thanks & Regards,
RKSHI Paul,
Thank you for your response.In our case even if all the Line/items level have same Plant and storage location still the delivery address is getting printed at Item level and not at Header Level and this is happening only for PO's created from PR's orginating from SRM7.0.
However if we create PR's directly in R/3 and then convert them into PO's,the delivery address is getting printed at the Header level if the delivery address is same for all the Item level.
Can you plz some insite into this?
Your help will be highly appreciated.
Regards,
RKS -
Delivery address at Item level and not at Header level in PO
Hello Experts,
We are facing an issue as described below:-
We are in SRM 7.0 using classic scenario.
After approval of multi line Shopping Cart in SRM ,PR's are getting
automatically created in backend R/3 system.After converting PR's into
POs in backend R/3,we are observing that the delivery address for these
PO'are getting printed at Item level and not at the Header Level
inspite of the delivery address being same for all the Item level.
As desired,the delivery address in the PO's should have the delivery
address at the header level if the the delivery address is identical
for all the Item Levels.
However,if we create a PR directly in R/3 system and then convert these
PR's into PO's in the backend R/3 system,we find that the deliver
address are getting printed at the Header Level if the delivery address
is same for all the item level(which is as desired)
Any pointers will be highly appreciated,
Regards,
RKSThis may be an old note, but it may point you in the right direction: Note 450425 - Delivery Address creates individual R/3 address number.
If you debug the function module in SRM that creates the PO in ECC, you can check if this is the case.
Regards,
Robin -
"IP and router address not consistent with subnet mask"
Hi all,
i have one of the old Powermac G5's running os x 10.3.5 "Panther" with a dual 2.5ghz processor, 512mb or ram, 160 gig hd, and no wireless card. I've been trying to hook the computer up to my network via an Ethernet cable (I have a Linksys WRT54G series router).
the problem is this: When I go through the Network utilities using the "assist me" option, select the LAN option, put in the necessary information (IP address, subnet mask, router address, and the dns host), and select continue, this message pops up:"IP and router address not consistent with subnet mask".
What I've found is that no matter if the computer is plugged in with a cable to the Ethernet port the message comes up which is very unusual.
Thanks in advance.Have you verified that you indeed have the proper subnet entered?
Why don't you just let the Mac obtain its ip address from the router via DHCP? -
Can a CR work only for one aggregation level and not other ?
Hi Experts,
I have a real time infocube (RTIC) over which there is a multiprovider, on top of which I have built 2 aggregation levels.
There are sequence of 2 characteristic relationships (CR's based on exit class) defined for the same RTIC.
Is it possible that the CR's be functional for one aggregation level and not in case of second aggregation level ?
Thanks and Regards,
PankajAdditionally let me explain the scenario in more detail:
The difference between 2 mentioned aggr levels is that of 0CALMONTH which is checked in second aggr level.
0CALMONTH is assigned as target char in first CR, hence both the CRu2019s work for input ready report built on first aggregation level and do not function with input ready report built over second aggregation level.
Therefore I wish to skip the complete execution of CRu2019s for I-R reports based on 2nd aggregation level.
As CR of type with derivation is functional only if the target char selected is not present in the aggregation level.
Please let me know if any more details are required.
Thanks,
Pankaj -
Mail todos consistently lose their link to messages and notes
Mail has this real nice feature of linking todos to messages and notes,
so I can jump directly from an iCal todo to the corresponding email message.
However, Mail consistently loses those links:
The todo is still there,
the message is still there,
but the two are not linked any more.
Sometimes, the todos are duplicated:
one still has the link, but doesn't appear in iCal (only in Mail),
the other appears in both in Mail and iCal, but has no link.
I have the suspicion that this occurs when I sync with iPod and/or MobileMe.
Any ideas?I have the same issue with Mail 4.x on Mac OS X 10.6.2, although I am not synching with iPod or MobileMe.
I've tested different options thoroughly. I first had MobileMe setup as an IMAP account, and in Preferences elected to store new notes and 'to do' items in the MobileMe account. This *did not* correct the issue of disappearing links, though it did create difficulty working with 'to do's otherwise. Specifically:
1) new 'to do's consequently could not be assigned to local iCal calendars, and instead required I create (or recreate) my calendars on the MobileMe IMAP server;
2) calendars created on an IMAP server can not contain events and may only contain 'to do's (according to iCal), thus requiring that I maintain two different sets of calendars if choosing to store notes and 'to do's on an IMAP server such as MobileMe;
3) within the Bento 3.x application (which I use to associate 'to do's, email and notes with address book contacts) the new 'to do's appear without any associated calendar because Bento can not read calendar data from an IMAP server—associating a local calendar with the 'to do' from within Bento causes the 'to do' to be stored 'On My Mac.'
I thus have elected to store new notes and to do items 'On My Mac' which, I understand, may not be a reasonable solution for most people using multiple devices—but at least doing so avoids the above issues. It does however create a conflicting issue:
4) if you need to link a 'to do' to an email as opposed to a note, either the 'to do' is required to be stored on the IMAP server (despite the option in Preferences) and thus causes the issues above or, following the inference made within "Mail's Help: Creating to-do items," you need to setup your email account access as POP and not IMAP so that your "account" is also 'On My Mac.' This is obviously not ideal.
Another observation when storing notes and 'to do' items 'On My Mac' is that the links created seem to be lost only when you quit and restart Mail; the links remain intact as long as Mail is running.
Does anyone else have further comments or ideas? -
Profit center dummy and company code XX01 are not consistent
Hi Gurus ,
can you please tell what i should do when the system gives the message that Profit center dummy and company code XX01 are not consistent . this is happening when i post document in FB50.Owing to program or transport errors, the company code assignment of profit centers may not be stored correctly.
This inconsistent data then causes program terminations or short dumps in further processing.
This note contains the report ZPCA40B_CHECK_CEPC_BUKRS, which checks the consistency of the company code assignment and corrects possible errors.
REfer to OSS <a href="https://websmp207.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=388178&_NLANG=E">388178</a> -
iPad 2 6.1.3 iMessage not consistently working. Has trouble sending and receiving. How can this be fixed? Have tried restarting, turning iMessage off and on, signing out and in. Please help, thanks!
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom
Maybe you are looking for
-
Can a characteristic be made a constant value in the transformation
Hi Therer is a req where i am picking 3 kf from 3 diff tables and out of that 2 tables have documnet type and one table doesnt have that..so now when i am running the query on that the kf which dint have a document type characteristic is not able to
-
Acrobat 9 does not install after Microsoft ODBC Setup on windows server 2003
I recently downloaded Acrobat Reader 9 from Adobe website. The package was consisted of one file AdbeRdr90_en_US.exe with an appx. size of 33.4MB. When i double click this file Microsoft ODBC Setup is started instead of Adobe Acrobat Reader 9 setup.
-
Add third party dll to solution
In my solution/web part, I used a third party dll (newtonsoft.json.dll). I have added the dll to the solution and project level. I do not see the dll when I tried to add a reference. Please see the attached screen shot. Please let me know what is the
-
Add header record with column names while writing csv file fileAdapter?
Hi I am writing the output of a query to csv file using fileadapter. but the file generated does not have the header record with the column names. how can I achieve this. please help.
-
PC Suite detecting in 'non-compatible' mode
I updated the PC Suite today. Now the PC Suite fails to connect to E71 in PC Suite mode. It keeps saying the phone has been connected in 'non-compatible mode'.