Levono 2323s Monitor Brightness not working and colors washed out

Just purchased a Levono 2323s monitor and installed the latest drivers. I am trying to calibrate the color and the brightness adjustment doesn't work. Also the rest of the colors are very washed out on every setting. Any ideas? I'm not the most technical person but I can do a little.

Similar Messages

I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.

I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.
I have tried everything and nothing works.

sound problems:
#Restore speaker icon to System Task bar, right-click on clock or tray > Properties > Volume: On
#Click on the Sound icon in System tray then on Mixer, make sure Firefox is not muted [http://dmcritchie.mvps.org/icons/fx_sound.png picture]
<p>Additional references
* [https://support.mozilla.com/en-US/kb/No%20sound%20in%20Firefox No sound in Firefox | Troubleshooting | Firefox Help]
* [http://support.mozilla.com/en-US/kb/Video%20or%20audio%20does%20not%20play Video or audio does not play | Troubleshooting | Firefox Help]
* [http://kb.mozillazine.org/Video_or_audio_does_not_play Video or audio does not play - MozillaZine Knowledge Base]

After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out

After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out. There is no function at all.

Ok I fixed the issue, turns out a couple of weeks ago, I downloaded a program that was suppose to help shrink some of your stuff to use less data, it was called Onavo. It was suppose to show you how much data you use to help keep you within your limits. If you have downloaded this, go through your settings and delete it and it will fix the problem. At least it did for me. I can now send photo's to non Iphone users via text no problem.

UCCX: Silent monitoring is not working and recorded file is also not playing

Hi,
Running UCM 8.5 cluster with UCCX 8.5.
In CSD, silent monitoring is not working.
Windows XP OS is running on supervisor desktop. when i select the agent
then the silent monitoring icon will highlighted once i click on the icon,
after 5-7 seconds i am getting an error "Silent monitoring session has
failed".
Not able to playback the recorded files:
I can able to record and the file size is 2.6mb for approximate 3min
recording.When i tried to play from supervisor record viewer it is playing
but no voice is coming. And i downloaded using play & save option and
tried to play the .wav file but i can't hear any voice.
Problem is while playing back the recorded file. I can able to see the
recorded files in the UCCX.
Please help me out!!!
Thanks & Regards,
Krishna

It's likely the same problem: CAD is not forwarding packets to CSD or the CCX recording service. Two common causes for this are:
The phone is not spanning to the PC port or does not allow PC Port VLAN Access. Change these options to true on the phone's configuration in CUCM.
The NIC of the agent's PC running CAD is not processing 802.1q-tagged Ethernet frames. It must not drop these and pass them into the Windows NDIS stack for CAD to get them. Google is your friend here; this commonly requires registry changes to make the NIC process the packets.

HT6065 I have a problem with my Mac book pro, my external monitor is not working and i need it to do my business. Please can someone help me with this. I am running windows 8 on parallels.

Since I have up dated my Macbook pro, my external monitor does not work. Who can help me

It was working untill i did the update

Toolbar buttons do not work and are greyed out not allowing me to log in or log out

I have increasingly been frustrated with firefox not allowing me to log in and or log out of important websites in which i pay my bills online This happens because the toolbar buttons are greyed out. It makes this feature non functional, therefore I have to resort to closing the website page without logging out. Can you tell me how to fix this problem? When i click on the buttons there is no response; its as if they were drawn.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

HT201406 I cant scroll my iphone or the touchscreen is not working and the invert color is on i wanted to off it i cant scroll it down what will i do i need some help

I cant scroll my iphone or the touchscreen is not working and the invert color is on i wanted to off it i cant scroll it down what will i do i need some help

Did you try recovery mode? iOS: Unable to update or restore
Or How to put iPod touch / iPhone into DFU mode

The home button of my iPod is not working and it got 1 year of warranty if they give me a new iPod can I take another color ?

The home button of my iPod is not working and it got 1 year of warranty and going to Apple store, my iPod is silver color. if they give me a new one can I pick another color ?

No, they will give you a refurbished (but basically a brand-new) iPod touch in the same color. I have the Silver as well...sort of kicking myself for not waiting for the Blue one to come back in stock.

My new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare. They will help you.
Best.

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

My w2207h HP Monitor is not working on my macbook pro with hdmi minidisplayport adapter. On Windows 7 via bootcamp it works. What can i do ?

As is said my HP w2207h monitor is not working with a minidisplayport to hdmi adapter and a hdmi cable which is working fine for my PS3. So the cable is not the problem. And on my TV i also have no problems at all activating a second monitor. Therefore the adapter isnt the problem either. When i plug it in the typical bluescreen appears. Then after a few seconds it appears again and there is no second monitor recognized. I also used the "recognize Monitor" button without success. Please help me, are there any special drivers or something like that ?
PS: bought a high end expensive adapter now because the old one was very cheap. But didnt help. Still stuck on the macbook not recognizing anything !

If you have an external drive you can hook up to the MacBook Pro I believe there *may* be a solution by getting an image to the MacBook Air.
On the MacBook Pro with the Windows install disk in the DVD drive fire up disk utility. Select the DVD and then hit the "New Image" button. Disk Utility should offer to create a disk image from the DVD. I would put that disk image on a USB drive connected to the Pro. You should be able to mount that image when you connect up to the Air. Hopefully BootCamp will be able to access that all through the process.
If that doesn't work (the drivers don't recognize the disk image once Windows gets underway for its install), you might try copying the installation files from the DVD to FAT32 formatted USB stick or drive and then using that to install Windows. I would expect Windows would be able to see the USB FAT32 drive and I don't believe any file on the drive is going to go beyond 4GB.
I haven't actually tried BootCamp on the Air, since I just use VMWare which has no issue installing from anything OSX can see. But BootCamp is going to eventually hand off operations to Windows and that's going to complicate matters--Windows has to be able to see the drive. While I believe there are drivers that let Windows connect to that drive, there's no way to authenticate (or even load the drivers I expect) before Windows itself is loaded--so it's a "chicken/egg" problem.

Photoshop CS4 64 bit - Clone Tool does not work (and other tools)

Hello.
I have been using Photoshop for many years going back to v5. I had used Design Prem Suite CS4 for the past year on an XP machine. All worked fine. I recently moved to WIndows 7 (64 bit) to get the add memory usage. CS4 installs both 64 and 32 bit versions on Windows 7 64 bit. So far all good. Any help would be GREATLY APPRECIATED. I am at a dead end and really have no confidence in getting Adobe's help.
My tools are working erratically, especially the cloning and healing tools. I can't even use Photoshop in its current state and this has been going on now for weeks, no help from Adobe on my lates support ticket post.
I canonly say that the clong tools is all over the place including but not limited to:
* When I sample and then click to stamp, lines shoot across across the image as it I clone a line not a single sample area. These stamps can be the length of the enite image.
* when I sample, then click to stamp, some the stamps occurs on some other part of the image.
* when I sample and the click to stamp, nothing happens. I have to click several times.
* when I sample and then click to stampl, the prior location I stamped has the clone applied
There are more, but this is to just give an example.
Notes:
* I have trashed preferences at least 20 times and the problem immediately reappears
* The problem happens in both the 32 bit and 64 bit version of PS running in Windows 7 65 bit
* The problem occurs with OpenGL tuned on and off
* I have installed the latest PC patch 11.0.1
* I have updated my latest NVidia drives. They are current.
* I uninstalled Photoshop (kept the rest of Suite) and that did not work, and the same problem reappeared. I am not uninstalling the complete suite but the reinstall has error (that is a separate issue)
* I have triple monitors running off 2 GeForce 9800 GT cards. These worked flawlessly before upgrading to the Windows 7 64 bit configuration. When I upgrades, I replaced the processor, motherbaord and moved to 12 GB ram. The graphic cards are the same.
Other tool issues:
* I have similar problems with the healing brush
* sometomes the text tool acts strange. I will click to enter text and a large area opens to enter text instead of just the cursor positioned ready for text. Then other times it works normally.
* the move tools sometimesacts strange. For example, if I try to move some test, the text jumps and moves of the image and I have to find it to drag it back on the image.
Thanks in advance

All I can say is... Boy am I glad I have an ATI card that just works (and that's including Photoshop CS4/CS5 32/64 bit)!
One thing I'm not sure was mentioned above... Try changing your Advanced OpenGL preferences to "Basic" or even turning off OpenGL to see if it affects the issue. Also try disabling the Show Overlay function in the CLONE SOURCE palette.
Best of luck getting to the bottom of these problems, guys. If they run on too long, consider switching brands.
-Noel

Auto brightness not working in ios6

I updated my iPad (3rd gen) to ios6, but when the update is complete i found that the auto brightness not working, when i use the ipad on dark room the brightness not changing, when i use ios5.1 it changing.. Any solution and actually the problem is on ios or in the hardware? Looking for help asap...

Well my device is different and since it is a iPhone 5, it is not being updated to iOS 6 but the issue is exactly the same. From my mind this could be up to software but also could be from an hardware issue. The thing is that even if it worked before iOS 6 for you the new software could have revealed hardware conflicts since the software interacts different with the hardware for some features. This would be the worst case scenario because I know that normally iPhone 4 devices if not the 8GB model will be out of warranty. For me this is just a small issue since my warranty is still one year :(
I have contacted apple care for this issue and have get the info that it will be escalated to the engineering team, for further investigation. As I know there was also an issue with some proximity sensors at the beginning if the iPhone 4 models and I think there was an software fix for a lot of them. Hope for the best!!!
I have also done a lot of Troubleshooting, reseted settings, content and settings, restored in dfu and recovery mode, restored with new .ipsw (iPhone OS), restored on different pc (so even this step gas downloaded a totally new .ipsw file), first on a Mac!
Next step wis that I will let the battery drain low entirely, a Troubleshooting idea of an friend. This might empower the entire hardware for a restart. I am not really believing in this step but I will give it a try :)

Dead Line monitoring is not working

Dear Friends ,
I have the belwo issue in my workflow . Deadline monitoring is not working in my workfloow.
Details of the Issue : --
I have a Dialogue step in my workflow , which sends workitems to the user .
Once workitem has cometo the user's SAP inbox it is in ready status . The user has not taken any action on that .The time perido mentioned in the " LATEST END" is 2 minutes , so the workitem should show " The follwoning deadline was missed latest end " for that workitem in theuser's sap inbox .
But this is not happening .
I have used this deadline monitoring concept many times , but i do not know wht is happening here .
Can any body please help me on this to sort it out .
Reagards
Prabhudutta

Hi Prabhudutta,
I think you have done all the necessary steps!
In such case what I feel the problem could be because of some minor thing that we might be missing...
Can you please check the below link and confirm if you have followed all the steps that it states:
http://****************/Tutorials/Workflow/DeadlineMonitoring/DM1.htm
Hope this helps!
Regards,
Saumya

Component monitoring is not working sap pi 7.31

hi friends,
we are using PI 7.31. after restarting the system suddenly component monitoring in (NWA--PImon) stopped working and even RWB -->component monitor is not working. No users are locked(RWBUSER,AFUSER)...and remaining all webpages are opening except this.Inside Exchange Profile we have user FQDN as well. SLDCHECK working fine and SM59 Destinations also working fine,
i am getting HTTP 500 connection timed out error.
please suggest me.
thank you
regards,
loordh.

hi Iñaki Vila and Jannus Botha,
thanks for your replies.
i am getting below error when i checked NWA logs and OS level logs
Exception caught by adapter framework: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 500 Internal Server Error
and regarding notes, i verified all and settings were OK and after PI restart as well no issues.
please tell me some more places where i can see.
regards,
Loordh.

Levono 2323s Monitor Brightness not working and colors washed out

Similar Messages

Maybe you are looking for