Library too large error.

I was running tight on space on both my library and vault drives, so I referenced a bunch of masters to a third drive. The library drive now has plenty of space and the application has actually sped up. However, I'm not able to back up the vault. The drives are the same size and I'm getting a Library too large error message for the vault drive. Is there a trick I'm missing, or do I need to delete and recreate the vault?
Thanks for the help!
Steve

OneDrive for Business/SkyDrive Pro has a 5000 item limit per Library. There is no workaround, other than reducing the number of items.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

"result too large" error when accessing files

Hi,
I'm attempting to make a backup copy of one of my folders (using tar from shell). For several files, I got "Read error at byte 0, reading 1224 bytes: Result too large" error message. It seems those files are unreadable. Whatever application attempts to access them results with the same error.
The files reside on the volume that I created a day ago. It's a non-journaled HFS+ volume on external hard drive. They are part of an Aperture Vault that I wanted to make an archive copy and store offsite. Aperture was closed (not running) when I was creating the archive.
This means two things. The onsite backup of my photos is broken, obviously (some of the files are unreadable). My offsite backup is broken, since it doesn't contain those files.
I've searched the net, and found couple of threads on some mailing lists describing same problem. But no answer. Couple of folks on those mailing lists suggested it migh point to full disk. However, in my case, there is some 450GB of free space on the volume I was getting read errors on (the destination volume had about 200GB free, and system drive had about 50GB free, so there was plenty of space all around the system too).
File system corruption?
Mac OS X (10.4.9)

Here's the tar command with the output:
$ tar cf /Volumes/WINNIPEG\;TOPORKO/MacBackups/2007-05-27/aperture.tar Alex\ -\ External\ HD.apvault
tar: Alex - External HD.apvault/Library/2003.approject/2007-03-24 @ 08\:17\:52 PM - 1.apimportgroup/IMG0187/Thumbnails/IMG0187.jpg: Read error at byte 0, reading 3840 bytes: Result too large
tar: Alex - External HD.apvault/Library/2006.approject/2007-03-24 @ 08\:05\:07 PM - 1.apimportgroup/IMG2088/IMG2088.jpg.apfile: Read error at byte 0, reading 1224 bytes: Result too large
tar: Alex - External HD.apvault/Library/Jasper and Banff 2006.approject/2007-03-25 @ 09\:41\:41 PM - 1.apimportgroup/IMG1836/IMG1836.jpg.apfile: Read error at byte 0, reading 1224 bytes: Result too large
tar: Alex - External HD.apvault/Library/Old Scanned.approject/2007-03-24 @ 12\:42\:55 AM - 1.apimportgroup/Image04_05 (1)/Info.apmaster: Read error at byte 0, reading 503 bytes: Result too large
tar: Alex - External HD.apvault/Library/Old Scanned.approject/2007-03-24 @ 12\:42\:55 AM - 1.apimportgroup/Image16_02/Info.apmaster: Read error at byte 0, reading 499 bytes: Result too large
tar: Alex - External HD.apvault/Library/Vacation Croatia 2006.approject/2007-03-25 @ 09\:47\:17 PM - 1.apimportgroup/IMG0490/IMG0490.jpg.apfile: Read error at byte 0, reading 1224 bytes: Result too large
tar: Error exit delayed from previous errors
Here's the "ls -l" output for one of the files in question:
$ ls -l IMG_0187.jpg
-rw-r--r-- 1 dijana dijana 3840 Mar 24 23:27 IMG_0187.jpg
Accessing that file (or any other from the above list) gives same/similar error. The wording differes from command to command, but basically it's the same thing (read error, or result too large, or both combined). For example:
$ cp IMG_0187.jpg ~
cp: IMG_0187.jpg: Result too large
The console log doesn't show any related errors.

When editing a wiki page, get a 'request entity too large' error message.

[https://stbeehive.oracle.com/teamcollab/wiki/Sales+Playbooks:Demonstrating+Differentiators|https://stbeehive.oracle.com/teamcollab/wiki/Sales+Playbooks:Demonstrating+Differentiators] I'm trying to edit one of my wiki pages that has been static for about 5 months now, and when I try and save the page, I get the following message (note I cropped some because of formatting issues when posting):
*413 Request Entity Too Large*
HTTP/1.1 413 Request Entity Too Large Date: Tue, 18 Oct 2011 15:35:41 GMT Server: Oracle-Application-Server-10g Connection: close Transfer-Encoding: chunked Content-Type: text/html; charset=iso-8859-1
Request Entity Too Large
The requested resource
/teamcollab/wiki/<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html xmlns="http://www.w3.org/1999/xhtml"><head><meta content="text/html; charset=utf-8" http-equiv="Content-Type" /><script type="text/javascript"> var U = "undefined"; var gHttpRelativeWebRoot = "/ocom/"; var SSContributor = false; var SSForceContributor = false; var SSHideContributorUI = false; var ssUrlPrefix = "/splash/"; var ssUrlType = "2"; var g_navNode_Path = new Array(); g_navNode_Path[0] = '1790'; g_navNode_Path[1] = 'splash_collabsuite'; var g_ssSourceNodeId = "splash_collabsuite"; var g_ssSourceSiteId = "splash";</script><script id="SSNavigationFunctionsScript" type="text/javascript" src="/ocom/websites/splash/sitenavigationfunctions.js"></script><script id="SSNavigationScript" type="text/javascript" src="/ocom/websites/splash/sitenavigation.js"></script><script type="text/javascript">var g_strLanguageId = "en";</script><script type="text/javascript" src="/ocom/resources/wcm/sitestudio/wcm.toggle.js"></script><script type="text/javascript" src="/ocom/resources/sitestudio/ssajax/ssajax.js"></script> <script id="ssInfo" type="text/xml" warning="DO NOT MODIFY!"> <ssinfo> <fragmentinstance id="fragment1" fragmentid="universal-metatag" library="server:UNIVERSAL-FRAGMENTS"> </fragmentinstance> <fragmentinstance id="fragment2" fragmentid="ExternalSiteCatalystFragment" library="server:EXTERNALSCFRAGMENTLIB"></fragmentinstance> </ssinfo> </script> <meta name="GENERATOR" content="MSHTML 8.00.6001.18904" /><title>Collabsuite Outage</title><meta name="Title" content="Collabsuite Outage"><meta name="Description" content="Collabsuite Outage"><meta name="Keywords" content="Collabsuite Outage"><meta name="robots" content="NOINDEX, NOFOLLOW"><meta name="country" content=""><meta name="Language" content="en"><meta name="Updated Date" content="4/12/11 10:38 AM"> </head><body> <!--SS_BEGIN_SNIPPET(fragment1,code)...
does not allow request data with GET requests, or the amount of data provided in the request exceeds the capacity limit.
Additionally, a 413 Request Entity Too Large error was encountered while trying to use an ErrorDocument to handle the request.
The page, should you wish to eyeball it, is at:
https://stbeehive.oracle.com/teamcollab/wiki/Sales+Playbooks:Demonstrating+Differentiators

Duane,
This looks like the URL has the content of a wiki page as an attachment to the URL which is blowing up the get request. Can you go to the earlier version - the history should allow you to backtrack changes - if you access this earlier version and change something small - does it save OK. If so then maybe the change you made is the problem.
I cannot access the workspace without being given explicit access so this is a guess.
Phil

JSFL function exportPNG failing with "bitmap too large" error.

I'm trying to export to PNG from the JSFL document.exportPNG function with 'bCurrentPNGSettings' but it fails. Flash keeps complaining that "The bitmap is too large. The largest bitmap that can be created is 8000x800 pixels."
The width x height of the document is set to 1920x1080 and I've tried modifying the publish profile appropriately. Still no-dice.
If I set 'bCurrentPNGSettings' to false so that the export dialog appears it pops up with the correct width and height; clicking OK exports properly.
Anyone have any ideas?
Cheers.

I am experiencing a similar problem. I have hundreds of symbols, most of which export just fine. A few symbols, however, do not. Although these symbols are typically modest in size, 1x49 pixels for example, Flash throws the error "The bitmap is too large. The largest bitmap that can be created is 8000x8000 pixels." which halts the script until it is acknowledged by the user.
It seems that this "too large" error might appear anytime the width or height is out of range, as in it is either too large OR too small. If you allow the Export PNG dialog box to appear (or manually do a File...Export Image...), it has a Width of 4 pixels. When I try to correct the value to 1 pixel, another error is shown saying "Please enter a number between 4 and 8000." Anything outside this range will not be accepted.
I also noticed that when I specified "false, true" for the optional 2nd and third parameters, the Export PNG dialog fails to appear.
I am using Flash Pro CS5 on a PC.
I tried this using Flash CS4/PC. I had an even worse time with the dialog, as I changed the width and height, it automatically changed the dpi from 72 to whatever value entered.
So in order for the script to be able to exportPNG on all of the symbols in the library, I have to first check the symbol's dimensions, and either abort the export operation, or correct the values, forcing a minimum dimension of 4 pixels.

Disk Utility: Creating a new blank image receiving "file too large" error.

Hello All!
I'm trying to create a 10GB non-encrypted, non-compressed RW blank image via the disk utility. The DU runs for a few minutes then barfs out "file too large" error. I have over 30GB free on my HDD. I tried with a smaller size of 6GB to no avail. Also tried unsuccessfully to create from a file (about 4 GB). My ultimate goal is to create a case-insensitive image to run an extremely important program needed for high priority work productivity (i.e. WoW). Thanks in advance for any advice! You will be my new best friend if you help me resolve this. =D
Hollie
"There are only 10 types of people in this world: Those who understand binary, and those who don't."

Hi Hollie, and welcome to the forums!
Have you created images before successfully?
Is this to/on your boot drive, or an external drive?
Have you done any Disk/OS maintenance lately?
We might see if there are some big temp files left or such...
How much free space is on the HD, where has all the space gone?
OmniDiskSweeper is now free, and likely the best/easiest...
http://www.omnigroup.com/applications/omnidisksweeper/
WhatSize...
http://www.macupdate.com/info.php/id/13006/
Disk Inventory X...
http://www.derlien.com/
GrandPerspective...
http://grandperspectiv.sourceforge.net/

Too large error troubleshooting jdev10.1.3.3- jhs10.3.2.52

Hi, how are you? I have in my jheadstart application definitiion cases where one detail or detail-detail group has list of values, when I run the application I take the following error: • Error: code segment of method _jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse) too large
, then I set the generate groups in region file- generate search area in region file properties- generate and run the application , but I cannot open the detail groups or both the list of values in master groups. Then I uncheck these properties and run again but sometimes I take again the above too large error, which prevents me from running the application. i' ve heard that if one buys the jheadstart license can have access to one patch that faces the too large problem successfully, we have the jheadstart license by oracle, could you inform about any possible solution that could solve this problem?

Yes, if you have a JHeadstart license, you can download the latest 10.1.3.3 release from cso.oracle.com.
Can you download this version and see whether it solves your problem?
Steven Davelaar,
JHeadstart team.

How to find the exact coloumn which fired the column value too large error

Hi all
I have a procedure which has a insert statement init.
I have encountered an column value too large error in that procedure.
I want to know exactly in which column the error has come
Any ideas,
Thanks
Hari

What is your insert statement? I get the exact column name here.
SQL> create table sample1(col1 number(1), col2 number(3), col3 varchar2(2))
2 /
Table created.
SQL> insert into sample1
2 select 1, 2, 'A' from dual
3 union
4 select 1,333, 'B' from dual
5 union
6 select 2, 44, 'CCC' from dual
7 /
insert into sample1
ERROR at line 1:
ORA-12899: value too large for column "ETL_USER"."SAMPLE1"."COL3" (actual: 3,
maximum: 2)
SQL> Cheers
Sarma.

ITunes library too large

When connecting MBP to Apple TV prompt appears "iTunes library too large"

iTunes prefs -> Advvanced.
SEt the iTunes library to a new drive.
It will still use the songs in the old location but new stuff will go to the new location.

File too large error message

I have an iBook G4 and I am running Numbers '08. I tried to open my budget document today and got an 'The document can't be opened because it is too large' error message. I just opened it a few days ago and it was fine, and my other Numbers documents are opening fine. It is a spreadsheet with about 5 sheets - not really THAT big, especially considering some of the Excel spreadsheets I deal with at work. Any ideas? This is (of course) the most important document on my computer...

(1) comparing to Excel documents size is meaningless.
Given the fact that Numbers uses xml, its files are huge.
(2) Try to close every application including Numbers then, double click your document.
Doing that you will have the maximum memory available for the document.
(3) check the quantity of space available on your HD.
Numbers make an heavy use of virtual memory so, it need a lot of free space available on the HD.
If these tracks don't help, you may send the document to my mailbox (use the free YouSendit if it's too big for a attachment)
I would try to open it and scan it to see if there is a way to reduce its memory requirements.
Click my blue name to get my address.
Don't worry if it contains personal infos, i'm neither the KGB, nor the CIA.
Yvan KOENIG (VALLAURIS, France) dimanche 1 août 2010 10:42:09

Code too large error

Hi,
I have an enum with about 3000 values in application. When I add some more items I get "code too large" error during compilation.
Is there any workaround for that problem? (Some configuration change?)
What exactly does compiler want to say? Where can I find info about what limit do I exceed?
I will appreciate any kind of help :)
Greetings
Michal

what can you kno? Model of the form is not hardcoded, it is in DB, it is modifiable by user(admin). Only elements which have specific business validation have identifier (i mean enum identifier). They must be somehow identified, not just by number. Number may change if sone adds a question before this one.
What's better than that? The solution has been made before I came to the company, but I believe it is one of the best possible.

'Program Too Large' error in PL/SQL

How to get rid of 'PLS-00123 - Program Too Large' error ? This comes when the program to be compiled goes more than a certain limit.
One way is to make the program modular by splitting the logic in several Procedures/functions and packaged procedures.
Is there any other way to fix this problem ? Any variable or parameter which we can set to get rid of this error.
Thanks.

There are some linits on program size and so the obvious thing to do (as the error suggests) is to break the program unit. It makes it a lot easier to maintain as well.
Regards
Grant Ronald
Forms product Management

Page Too Large Error with JHS 10.1.3.2

Hi,
I have migrated to the new version of JHS (10.1.3.2). According to the JHS documentation the “page to large error” has been fixed in this version but I am still experiencing this problem.
I have checked the boxes for Generate Group in Region File and Generate Search Area in Region File in the app def for the large page that I have in my app. With this done the “page too large” error occurs. I then tried checking the box for Generate in Region File on each item group region on my page but the “page too large” error still happens. None of my item group regions contain that many items (average is about 10 items).
Is any one having the same issues?
Regards
Bar

josealej,
Have you spilt up your items into different regions and selected the option to generate the groups in a region file? If so then you can try setting the "generate in region file" option on each region container. Check out section 4.6.2 in the JHS developers manual.
Sandra,
Unfortunately I don't have enough free time to debug the problem. I will look into it when my schedule is not as hectic.
Bar

File too large error or corrupt file error

I have scanned some images using a Nikon Cool Scan and when trying to import the the NEF files into Lightroom I get a corrupt or unrecognized file error. Bring it into CS2 or CS3 and save as TIFF and try the import and get a File too large error.
Any ideas or help on this. What is the file size max for import?
The scan is 4000dpi even tried at 300dpi.
Thanks in advance for any insight.

> Is it truly a size problem? If so, what is recommended? Lee Jay states that 10000 pixels is the max on either side. Okay, in DPI, what does that translate to?
<br />
<br />There's no necessary relationship between pixels and dots. You could scan an image at 4,000,000 dpi and translate it into an image of 100 x 100 pixels. I've used ridiculous extremes to make a point. The LR limitation is currently 10,000 pixels for any side. So you could have 9,000 x9,000 pixels but not 10,001 x50 pixels.
<br />
<br />Is this now clearer?
<br />
<br />
<span style="color: rgb(102, 0, 204);">John "McPhotoman"</span>
<font br="" /></font> color="#800000" size="2">~~ John McWilliams
<br />
<br />
<br />
<br />MacBookPro 2 Ghz Intel Core Duo, G-5 Dual 1.8;
<br />Canon DSLRs

PLS-00123: Program too large error

Hi,
We have been getting a 'PLS-00123: Program too large' error while compiling a particularly large package on a *11g database*. The package has around 15000 lines of code. We are compiling the package using a third party IDE(PL/SQL Developer).
I went through AskTom's note (http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:571023051648) and Metalink Note#62603.1 which helped in understanding the problem. However, could not resolve the problem since modifying the structure of the package was not an option.
Someone from the team contacted a DBA regarding this who in turn suggested that we compile the package in SQL*Plus. We did as suggested on a *10g client* connected to the 11g database and the package got compiled.
I cannot understand why we encountered the error while compiling the package in PL/SQL Developer but not while doing the same from SQL*Plus. Can anyone please explain this or point out some helpful documents?
Regards,
Sujoy

Hope this link helps..
http://forums.allroundautomations.com/ubb/ubbthreads.php?ubb=showflat&Number=10265&PHPSESSID=2e3c1b028a66500ae8a1730abc88b993

Itunes library too large and won't recognize all files, just new ones but

still shows the old ones and their location in the library. I was keeping the library on the 2TB external drive. It got too large. Now I want to put the music on one of the 1TB drives and just the videos on the 2TB drive. From my PC, I can watch everything.
I cannot download to an iPod or iTouch anything from the 2TB drive. When I hit max capacity, I temporarily started saving on one of my internal 2TB drives (space wh*re, I know)before I hit on what my solution would be, and now I can only download from that location. Why?
What can I do? I even tried switching the library location back, and it won't recognize anything. I'm screwed, and I have all this material... YEARS of collecting...
Someone please help me...

To clarify, currently on the 2TB external drive are music and videos. I want to split them up and hopefully save some space - and maybe foresee problems in the future when I hit max capacity on the 1TB external, and think about a 4GB (not the best option I see at this time) or another 2 2TB drives.
Doesn't the Library file just save locations when iTunes closes down so everything should be OK? I mean, the prog can recognize everything, it just won't download to anything, even if I move from the external drive an older movie to the new drive, it refuses to "see" the movie so I can download it.

Library too large error.

Similar Messages

Maybe you are looking for