License Agreements not displayed during Install

I created and installer in LabVIEW 2011 (64-bit OS with Windows 7). I added a custom license agreement (rtf) file to my installer and included it as shown below.
The setup.ini includes a reference to the file and I confirmed that the file exists in the License folder:
When I test the installer on my development PC or target PCs, my custom license agreement is not displayed. I've toggled the boxes in the setup.ini to show the standard NI EULA but that doesn't get displayed either.
My setup.exe file is dated 6/21/2011. I checked previous installers that worked properly and the setup.ini files looked similar but the setup.exe was dated 9/1/2010.
Any advice is appreciated...
Solved!
Go to Solution.

I created a new installer with two files added to the project: test.exe and license file.rtf. I selected "include custom license agreement" in the dialog section of the project explorer. The custom license file was added to the "license" folder in the "Volume" folder when compiled. The setup.ini file has these parameters listed:
[Dialogs]
UserInfo=0
FeatureInfo1=1
SingleDirectory=1 I
nstallationType=0
FeatureTree=0
License=1
License2=1
NICertificate=0
ConfirmStart=1
End=1
[Distribution]
Title=1 GUID={110B585D-BD8E-4F1B-882F-B8CF73757A51}
PackageGUID={48EF0D84-863E-4927-AA42-C23869E4635F}
Version=1.0.0 IDPath=nidist.id Has64bitPart=1
[EndDialog]
Readme=5;30,50,330,150;static
[Files]
LicenseTextFile0009=;license\License Agreement.RTF
License2TextFile0009=NI;license\NI Released License Agreement - English.rtf
License2TextFile0010=NI;license\NI Released License Agreement - Spanish.rtf
License2TextFile0016=NI;license\NI Released License Agreement - Italian.rtf
License2TextFile0007=NI;license\NI Released License Agreement - German.rtf
etc
When I ran the installer, there was no custom EULA an no NI EULA. Has anyone tested this functionily in LV 2011? Any ideas??

Similar Messages

MAX will not display any installed modules mounted to cRIO-9074 chassis WinXP SP3 LV2010 developer

MAX will not display any installed modules mounted to cRIO-9074 chassis WinXP SP3 LV2010 Developer Suite.
I can see the backplane in MAX and Project explorer but none of the modules show up for configuration in the drop down lists. The LV was just installed on the PC with RT/FPGA/Sound and Vibration. I have Admin and am accessing through a PCMCIA Ethernet card. I have to disable normal wireless Ethernet just to see the cRIO unit at all.

Well, you actually won't be able to see the C-series modules for a cRIO in MAX. Take a look at this KnowledgeBase article for a little more information.
As far as not being able to see them in the Project explorer, are you trying to run in FPGA or Scan Interface? If you're using the FPGA Interface, you'll have to make sure to expand the FPGA Target tree in the Project explorer to see these modules.
Regards,
Austin S.
National Instruments
Academic Field Engineer

Application Icon are not displayed during Clickonce installation in WPF Application

During Clickonce installation of WPF application, Icon File(ico) is not displayed in the start Menu and installed applications list in control panel..
Default icon only gets displayed.
In my project
Already added ico file in the "Icon and Manifest" in Application Properties.
Please answer me how to show Application Icon in the Start Menu as well as in installed applications in control panel

Did you do this:
http://learnwpf.com/post/2012/07/09/Adding-an-Icon-and-File-Association-to-WPF-Clickonce-Applications.aspx
You also set the ico file as the project icon.
Since that's under the Icon and Manifest I guess you did that.
Also
The main window ought to have it's icon set to thee icon.
The main window is the first window you open - which of course may or may not be called MainWindow.
Hope that helps.
Recent Technet articles:
Property List Editing ;
Dynamic XAML

2006 Mac Pro + NEC 3090 - grey screen not displayed during boot

I have a September '06 Mac Pro 1,1 (Woodcrest variant) hooked up to an NEC 3090 30" LCD monitor, running OS X 10.5.7. Previously, I was using an Eizo S2110W 21" LCD; turning the monitor and computer on would cause the following to be displayed (in order):
1. Light grey background with dark grey Apple logo with spinning thing.
2. Solid blue background.
3. Leopard wallpaper.
4. Log-in dialogue.
Since using the NEC, the grey screen is not displayed at all: the display stays blank until the blue screen is displayed, and then the Leopard wallpaper and so on. This is using the 2560x1600 native resolution of the display, and has occurred using both 10.5.6 and 10.5.7.
If I change the resolution to 1280x960 and boot, the grey screen is displayed. If I change it to 1600x1200, I get weird corruption on-screen during the period when the grey screen should be displayed; for some reason, this includes part of the desktop wallpaper I was using before I rebooted.
Resetting the non-volatile RAM using Command-Option-P-R works for the very first time I boot the computer, though the grey screen is displayed at very low resolution. If I reboot from the log-in dialogue immediately afterwards, normal behaviour occurs - i.e. the blank screen.
The upshot of all of the above is that if I want to boot into Windows, or install OS X (e.g. when Snow Leopard comes out), I have to remember to boot into my existing OS X installation, change resolution, reboot whilst remembering also to hold down the ALT/Option key. It would be much easier if I could do away with having to change resolution.
I have tried connecting the monitor to a PPC Mac mini at 1600x1200 (it won't go any higher), using Tiger 10.4.11 (not sure of exact version - the latest). At this resolution, the grey screen is displayed.
Using a '08 MacBook Air (first generation) and the supplied DVI adapter, also at 1600x1200, nothing is displayed on the NEC until I get to the log-in screen. This occurs if the NEC is set to be the primary display or the secondary one - the only difference is where the log-in dialogue is displayed. I am not familiar with dual-screen behaviour, so I can't say whether anything is supposed to be displayed or not (i.e. does the grey appear on both displays?).
I have been in touch with NEC Europe support on this issue, who suggested it might have something to do with the 10.5.7 release. I know this not to be the case, as it was occurring prior to 10.5.7 being released.
Any ideas?

Put more of your hardware listed in your profile.
I looked and don't see you list your graphics card anywhere.
Graphic card it came with was either X1900 (watch for heat and dust bunnies and clogged vent);
OEM 7300GT (seems unlikely).
You could have replaced either with 8800GT or ATI 3870.
Require 10.5.2+ ideally 10.5.6+.
Some problems cropped up with 10.5.7. 10.5.7 doesn't work on some (many) 3rd party displays and stay with 10.5.6 if necessary until it is fixed or resolved.
But you say it happens with 10.5.6 also, and was doing so before 10.5.7? which makes your problem somewhat different or unique.
Zapping PRAM or NVRAM reset obviously shouldn't be needed repeatedly. And your graphics card probably needs to be replaced, or test with another card to rule it out.

CC desktop app not displaying my installed apps?

My Creative Cloud desktop app is not displaying my list of installed applications?
It is telling me that I have not installed any apps? This is a major concern as i will be missing out on updates to the apps I have installed as part of my CC membership subscription.
Any ideas? I have tried logging out/in, changed my password, but nothing seems to solve it?

Where are the Adobe reps here?
My CC app is still not working!
I am paying for this service, the least you could expect would be assistance with issues such as this?

Configurations tools ( netca,dbca ,assistants) not started during install

Friends,
I am trying to install Oracle 9iR2 on redhat advanced server.
We copied the files into a staging area.During
install it asked for Oracle.swd.jre file which i checked
not there.
But i ignored the error message and finished the
install.Installation went through successfully but the
configurations tools netca,dbca and agent assistants have
not started. Apache server has started sucessfully.
I have done installs earlier on Redhat 8 but i never
had problems like this.I checked the staging area and i could able to see a directory like oracle.swd.jre in
Disk1/stage/Components/oracle.swd.jre but not the file.
I will be glad if anyone can tell me the work around
for this.
Regards.

Friends,
I am trying to install Oracle 9iR2 on redhat advanced server.
We copied the files into a staging area.During
install it asked for Oracle.swd.jre file which i checked
not there.
But i ignored the error message and finished the
install.Installation went through successfully but the
configurations tools netca,dbca and agent assistants have
not started. Apache server has started sucessfully.
I have done installs earlier on Redhat 8 but i never
had problems like this.I checked the staging area and i could able to see a directory like oracle.swd.jre in
Disk1/stage/Components/oracle.swd.jre but not the file.
I will be glad if anyone can tell me the work around
for this.
Regards.

Ipod software license agreement not going away

every time itunes comes up it has this ipod software license agreement and i click yes i agree and them it wont go away but i can put music on my ipod
is there any thing i can do it to go away?

this doesen't totaly solve the problem, but I have the same problem. you can click and drag music from itunes where the music is in the '{Music folder on itunes}click and drag songs from there to where your ipod is listed on the left side of itunes. this will not work where your songs are listed under shared. so if you have music there find a way to get it on just the music folder in the itunes libary.

Contact names not displaying during calls, but only in logs

Many names in the address book not showing up
Hence, when i get a call or make one, the name doesnt come up with the number
after the call, the number with the name is visible in call log as outgoing or incoming or missed
in the database details it shows my address book having 238 numbers (these are the numbers currently visible)
so how is it that the names are visible in the log and not in the address book and also not visible during a call
Please help
(a search for this topic hasnt got me the correct results)

Same thing happened with mine! Still haven't figured it out, but **bleep** it's annoying!

Photos not displaying during playback

Hi all
I added a few still photos from my iPhoto library at the beginning of a showreel I am putting together but for some reason some of the photos won't display during playback.
They appear on the timeline just fine but during playback they go black before it returns to the rest of of the video clip where normal play resumes.
I have tried to move the photos, delete then re-add the photos but still nothing.
The photos display perfectly in all other sources and devices.
Any ideas?

I am having the same issue.
There are several methods.
Hold option and CMD when iPhoto starts and rebuild the data base, then try grabbing them form iPhoto to iMovie.
Export them from iPhoto to the desktop and drag from desktop to iMovie.
Thats the 2 which I have limped through the last couple of issues I have had with it, but now I am having no luck at all with an of the solutions (check my recent post about this issue and Apples lack of sh*ts given about it), there are listed the solutions I have tried.
Hope this helps...

Unknown members not displayed during lock and send

Hi We are on 11.1.2
A user is using lock & Send to update approx 3000 rows of data. The issue is, some members do not exist in outline any more.
so Display unknown members is Ticked ON in Global properties to make it easy to find the unknown members, but its not displaying any unknown members.
Thanks

How about the "Display Messages"? Is it set to None? It'll not show unknown members if display messages is set to none.
Regards
Celvin

Acrobat XI Software License Agreement Not Showing Up

When I open Acrobat, downloaded through the APPS section of the Creative Cloud, the software license agreement box that pops up is blank and doesn't do anything when I press on Accept.

Known issue.
See http://forums.adobe.com/message/4835712

Adobe software (acrobat cc) license agreement not accepting on mac

we have buy adobe cc, all softwares are installed and working properly. but i m not able to use Acrobat at it always pop up software lincense agreement accept dialogue box. But when i click on accept, nothing is working. Accept button is not working. Don't know the reason, i have tried reinstallation but still not working. Please help

Hello Bharat,
Please try signing-in into your Creative Cloud application again.
or give the full permission on following folder.
/Library/Application Support/Adobe/
Regards,
Anoop

Oracle10g 32bit lib files not found during Install

Hi All,
During my installation of Oracle 10g on HP-UX11.11, I have found that Installer could not found required 32bit lib files in ORAHOME/lib32
folder.But I have completed all the prerequisit tasks as per the Oracle manual.
1)ORAHOME/lib32/libocci.sl.10.1 not found
2)ORAHOME/lib32/libhsdb.sl not found
3)ORAHOME/lib32/libttsh10.sl
4)ORAHOME/lib32/libxml10.a not found
also other ".mk" files in sysman/lib32 not found.
can anybody advice me what may be the possible errors for this.
Regards,
Abhinav

Hi Gustavo,
I have downloaded the Oracle 10g software from Oracle website. .cpio files are copied on my hard disc. I have extracted .cpio files i.e Disk1 & Disk2.
I have installed all the patches+java 1.4 patches+ June03GOLDQPACK+XMotifDev
I have not installed HP C,C++-ANSI compiler.
This is the scenario. still having errors for 32 bit libs. OUI says 32bit libs not found
in /ORAHOME/lib32 folder.
Regards,
Abhinav

Apple Application Support not found during Install

Got this message afte supposedly successful iTunes install on Windows computer. What did I miss?

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Adobe Creative Cloud app not displaying already installed apps and can't install new apps Mac OS 10.9

Hi,
I've been using the new Adobe Creative Cloud 2014 for a couple weeks now perfectly fine, until yesterday. I use Photoshop, Illustrator, and After Effects quite extensively. This morning, I opened the Adobe CC app and all but Adobe Acrobat Pro show installed. The other already installed apps have buttons to "install" but clicking this button shows the "Exit Code: 7 - Unable to complete Silent workflow" error in the logs. Ive tried disabling my Sophos antivirus program and restarted several times. The already installed applications themselves seem to function normally, they open and work projects. I've even tried to uninstall one of the already installed programs (Bridge) and it fails to uninstall, saying I need to restart my computer and disengage my anti-virus, which I've done. I've uninstalled and reinstalled the Adobe CC app as well, and have the same result. Help.

So I've completed the solutions listed in the help article with no changes. Here is how it has gone with each solution listed in the article. Also, it is not clear in the article whether these steps are to be done in sequence or may solve the problem individually, but since Solution 1 fails for me, doing them in sequence was impossible.
Solution 1: Mac OS: Run the uninstaller in the Applications/Utilities/Adobe Installers folder to remove the program listed as up-to-date.
This does not work because uninstalling any of these applications does not work. As I stated in the post, the uninstaller for all of my adobe applications (photoshop, bridge, indesign etc) throws the same error each time saying I need to: restart my computer (done) close all applications (done) and disable my antivirus (done, which was fully engaged when I installed the apps originally with no issue) and disable my firewall (done, I don't use one). Not sure what I'm missing on that, plus its a real bummer that I need to reinstall all of my CC apps even if the uninstaller did work because my creative cloud app won't recoginize they've been installed.
Solution 2: Remove the OPM.db file and relogin into the Creative Cloud desktop application using the Adobe ID tied to your subscription.
This did nothing.
Solution 3: Download and install the latest version of Adobe Creative Cloud desktop app from Creative Cloud for desktop.
This did nothing.
Solution 4: See the steps listed in Solution 1 to remove all installed Adobe Creative software. Once all Adobe Creative software has been removed, use the CS Cleaner Tool to ensure a complete removal. You can find details in Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6.
This did not do much because I can't uninstall the software to begin with.
What am I missing?

License Agreements not displayed during Install

Similar Messages

Maybe you are looking for