License assignment

I have created users and imported license file on test database, now I want to assign licenses on production database.
How this can be done ?

Hi,
In Test database go to
Administration -> Licence -> Licence Administration
You should see your available licenses on the right. Simply highlight the relevant users on the left and untick the boxes on the right (the available licenses will go up each time you untick a box)
Then connect to the Productive database.
Go to
Adminisration -> Licence -> Licence Administration
You should see your available licenses on the right. Simply highlight the relevant users on the left and tick the boxes on the right (the available licenses will go down each time you tick a box)
Regards
Mario

Similar Messages

  • Error in export license assignment

    Hello gurus,
    For legal regulation EAR, I'm checking 3 partner functions for destination country i.e. End user, ship-to & sold-to. I have a sales order with end user in IN (India), ship-to in US & sold-to in SG (Singapore). When assigning an export license (with destination countries as SG, US, IN in the license), I'm getting below error. It allows me to assign the license but after license assignment, the sales order continues to remain blocked. Please let me know why it remains blocked. What exactly is this error message mean?
    License is required for country US SG IN (see log)
    Message no. /SAPSLL/CON_CORE243
    Thanks,
    Satish

    Hello Satish,
    First of all, the function of 'Check all partner function in the partner group' is enabled per your description. In this matter, the system will only release the document if all the licenses are determined and assigned under the relevant partner country.
    Yes, your assumption for not to maintain determination strategy is partially correct, this is not true for the case of function of 'Multiple license type' and 'Check all partner functions in partner group'. For these scenarios, it is not simple that any time system will release the document if one license is assigned to.
    Concerning the error message 'License is required for country US SG IN', if you refer to the log in detail, which shows the system were unable to determine the licenses under the license type of country US, SG and IN, please simply maintain the appropriate license determination strategy to force system find the appropriate license type.
    Also, it is also interesting to see your comment 'half baked solutions in 10.1', can you also please elaborate more on some of the things you think 'never worked the way they're supposed to'?
    Thanks,
    Derek

  • Export License assignment

    Hi,
    I am creating new material in R3 side and transfered to GTS system.
    Please let me know License assignment for this new product in GTS is automatic process or manually we need to assign the license for each material
    if it is automatic kindly let me know the process/step
    Thanks

    Hi ,
    License to product is not assigned rather it is determined thorught Licesne determination procedure set up in GTS.
    If set up is done and transaction doc from feeder system lands to GTS the license dtermination set up determine the license for a prodcut.
    Basically based on Legal  Reg + Country of Destination + ECCN license type is determined.
    You have to carry out following Config set up for license determination .
    First you have to classify your product for ECCN:
    Under Numbering Scheme.
    1. Define Numbering Scheme for Exp List
    2.Assign Numbering Scheme of  Exp List for License Maintenance
    3.Assign Numbering Scheme of  ECCN for Legal control
    Under Classific. Master Data  GTS Main menu
    1.Change/Define Control Group
    2.Change/Define Pecularity Code
    3.Maintain Export Classification number
    4.Classify Product for ECCN ,Control Group and Pecualrity Code.
    License Determination Set up
    Gen Settings-->Legal Reg
    1.Define Legal Regulation
    2.Define Legal Det Proc.
    3.Activate Legal Reg
      Legal Control Services
    1.Assigen Leg Det Proc
    2.Activate Legal Reg For Exp/Imp
    3.Def Licensetype Det Proc. Assgn Det Strategy
    4. Cntrl Settings Leg Cntrl Allowed Status
    5. Def  Cntrl Proc  for Address Comaprison of License Type
    6. Def  Depreciation grp of License Type
    7.Def   License Type Allowed Status
    Leagal Control-->Export  GTS main menu
    1.  Maintain Export Licenses
    2. Maintain License Determiantion Strategy
    Control:
    Legal Raegulation
    Control Group
    Country Group
    Licesne Type
    Hope this helps.
    Kind regards,
    Sameer

  • Server License Assignment

    2 SBS 6.0 Servers both at sp5.
    My office has been having intermittent login problems ever since I
    recovered from a hard drive crash on one of my servers and had to
    re-install Netware on one a new drive.
    Logging in produces a variety of results, usually to 2 or three
    different users every day or so. Sometimes the login window just keeps
    re-appearing after a login until a user reboots. Other times there are
    messages like "An unexpected error has occurred" or "Connection to the
    server was terminated" usually with an 8819 error code attached, which
    points to a licensing issue.
    Investigating further I find that the license assigned to the previously
    crashed server is not being consumed by that server even though it is
    assigned to it. I also note that the installed date is back in 2003.
    This seems like the original license rather than the one I thought I had
    re-installed earlier this summer.
    Thanks,
    Scott Schaffer
    Scott Schaffer
    ITSA
    Olive Waller Zinkhan & Waller

    Sorry, didn't see your earlier email. I solved the immediate login
    problem. Yesterday afternoon I ran an unattended dsrepair. There were 0
    errors but it apparently did not unlock the ds when it was finished.
    This morning there was a "Cannot update NDS against an entry within
    subnet container: DHCP-Subnet" and " Error (-663) occurred while saving
    a backup of the NDPS Manager database files" on the our main file
    server console screen. The -663 error pointed me to TID 10015560 about
    the DS being locked. I followed the suggestion to run dsrepair once and
    that unlocked the server and people were again allowed to login. This
    server also shows the proper license consumption again.
    So I am back to just the one server with no licesne consumption. I have
    not yet capture a pm trace when a person logs in and has tree or server
    not found. I will see if I can get that to happen today as I cannot
    reproduce the login error every time.
    Thanks for your patience.
    Scott
    Scott Schaffer
    ITSA
    Olive Waller Zinkhan & Waller
    >>> Anders Gustafsson<[email protected]> 10/23/08 09:03AM
    >>>
    Scott Schaffer,
    > Over the night all of a sudden my other server is no longer consuming
    > it's license either and nobody can login.
    >
    OK. Is your DS healthy? Licenses are read from DS, so if you have DS
    problems, then you will have license problems. As I said earlier: What
    does the PM TRACE show when you try logging in?
    - Anders Gustafsson (Sysop)
    The Aaland Islands (N60 E20)
    Discover the Novell forums at http://forums.novell.com
    Novell does not monitor these forums officially.
    Enhancement requests for all Novell products may be made at
    http://support.novell.com/enhancement

  • From list of IAP's in Aruba Central, how do I select only a few of them for license assignment?

    Q: I have hundreds of IAPs in the device management page of Aruba Central. How do I select  only a few of the them to assign license?
    A: Especially, when there is huge list of IAPs showing up in the device management page of Aruba Central, it becomes difficult and time consuming for an administrator to assign license for each IAP and then move on to the other.
    This problem was sensed by the Aruba Central development team before hand and put up a solution in place that would help a user to select multiple IAPs from the list and assign licenses to them at once.
    Lets understand on how to do the same:
    1. Once you login to Aruba Central, click on "All Groups" and move on to 'Device Management" under Maintenance.
    2. In the right-pane, you would be presented with the list of IAPs.
    3. Now , click on the "Search tool" and it pulls down the fields to enter the search text. 
    (NOTE: Make sure you have selected ALL in the above drop down. This helps central to search among all IAPs irrespective of group and license assignment.)
    4. Enter the Serial Number or MAC address of the IAP or Switch and hit "Search"
    5. Here is where the intelligence of Aruba Central comes to play.
    From  the search result select the IAPs and Central would remember your selected IAPs, even if you change the search string and initiate an other search.
    6. Once you finish searching all IAPs that you want to, you can click "Assign License" button in the lower left-corner and move on assigning the licenses to the selected IAPs

    This was a life saver! I even started to manually tick the box as well!

  • License Assign in Client 8.8

    Hi all,
    we have imported the productive license via the sap license manager. I can see the Hardwarekey, SystemNumber and the Installation Number on the Licensmanager under setting.
    When I start SAP 8.8 I get all the licenses in the license administration (register components), but the SAP Client under Help (Information about) has no Hardwarekey, System Number and Installation Number. It writes -1 in Installation Number and 0 in Application ID. Therefore I cannot assign the licenses to the users!
    Regards, Nick

    Hi Nicholas,
    This is what you wrote:
    "When I start SAP 8.8 I get all the licenses in the license administration (register components), but the SAP Client under Help (Information about) has no Hardwarekey, System Number and Installation Number. It writes -1 in Installation Number and 0 in Application ID. Therefore I cannot assign the licenses to the users!"
    To assign the license to a user you only need the information that appears under the licenses administratrion form and not the information under Help. Therefore, you still can assign the license to users eventhough the Help menu is "empty".
    Regards
    Victor

  • Update license assigned documents when a position in rejected

    Hi,
    we have a license that belongs to a customer and have some assigned documents.
    In one of this documents we have rejected some positions (not deleted) but the license doesn't update these positions, so the licensed has exceeded the maximun quantity allowed and we can't create another sales order.
    Is there any note that helps me with this trouble????
    Thanks,

    njcm wrote:
    When I connect to i tunes it tells me I need to download version 10.6.3 but when I attempt this nothing happens! Can anyone help?
    10.6.3. of what? What is telling you this?
    What preceded this? Were you attempting to update the phone to iOS 6? It can take quite a while.
    If the phone is running iOS 6, that requires iTunes 10.7, which requires OS X 10.6.8 on a Mac. Maybe that's what you're seeing...
    You really need to give us more information.

  • How do I assign one of the license tokens to a newly added internal user?

    I have 6 out of 10 licenses assign and I added another user, assign him "roles" and now I need to assign a internal netpoint license token to the user. How is this done? It's been a while.
    Thanks

    Hi Scott,
    I assume you have Current Licensed Users: 6/ Total User Licenses: 10 and you want to add a licensed user role to a new user in web tools.
    If this is your question then go to Business Partner --> Users --> select the user --> Security --> Roles --> add the licensed user and roles from the dropdown menu.
    Regards,
    Mohan

  • How to assign RDS 2012 R2 temporary license per RDS user CAL

    we have setup  two RDS servers of 2012 r2 runnning with both RDSH roles, RDP-1 is the license server and in RDP-2 its pointed to RDP-1 to take license and licensing mode is set as per user. users are getting license in per user mode of 60 days validity.
    Question is how to get temporary license assigned for users in per user mode, this is requirement for testing the license in our company as it is setup just now.So i have removed the pointing of license server in RDP-2 using Group policy, but still cannot
    see a temporary license in RDP-1 -> License Manager.
    Pls help to solve this issue.
    Thanks,
    Karthickraj

    Hi,
    As per my research by default there are 2 remote session available for administrative purpose only. Once you want more than 2 remote session for user to connect we need to purchase RDS CAL (as you know), activate the license server and then configure the purchased
    RDS CAL with the help of MS Clearing house. There is no way to assign the temporary license, but when you install the RD License server, activate it and once user will get login by default will get user temporary license for specified days such as 60. Within
    that time you need to purchase the CAL and complete rest process. You can get more information from following article.
    RD Licensing Configuration on Windows Server 2012
    http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Ip address already assigned when trying to login to nonsecured wifi network

    I am having problems connecting and/or loading pages to an unsecured wifi network at work.  I used to be able to connect and access the internet just fine.  I think they might have been having router problems as our signal strength got weaker and weaker until none of us could connect.  I do not know what changes the administrators did on the other end, could have replaced the router or just reset it for all I know--they symptoms on our end looked like a router that was just getting bogged down slowly over time.  I do not have access to the router and the administrator(s) are all but impossible to contact.  All of a sudden, one day we had full strength wifi again and initially I could connect on occasion and even access the internet, but it was not often nor for very long, while everyone all around me has no problems connecting--I believe I may be the only Mac user on the network in the immediate vicinity. 
    I am using a mid 2009 Macbook Pro 2.1, running Snow Leopard, connecting with airport extreme--all the updates have been applied.  If I restart my computer with no programs running, I can connect on occasion and when checking my Airport Extreme connection under Network Preferences when it says i'm connected I am assigned a 192.XXXXXX IP address assigned by the router I think, when this happens, as soon as I try to load any browser (I've tried Safari, Chrome, and Firefox), I immediately loose all signal and checking my Network Preferences again, my IP address has been changed to a 169.XXXXXXX address and there is message below my "Turn Airport Off" button saying that wifi has assigned this address and I will not be able to connect to the internet.  This does not always happen, but almost always and I haven't been able to connect successfully for days now, however, about a week ago, after making no changes to my machine, it would connect for a short time, load pages, and then loose the connection shortly thereafter.  I don't always have to load a browser for this IP address change to occur, sometimes it comes up with this from the beginning or will just change the connectivity status after just a few moments of being connected with the other IP address.
    I have found similar postings with some of the same symptom where it is suggested there may be no more DHCP licenses to be had, but everyone around me can connect without problems and get Licenses assigned, even if they connect after me.  I have tried to renew the DHCP lease with no success.  Someone suggested in another post that the network admin havs to approve my MAC address, I have not changed it and used to be able to connect without incident (and like I said, on rare occasion still can for a short time and then it drops).  I have ran the Networking troubleshooter and I get green lights on everything except Network Settings and Internet, the ISP and others are all green.  The Network Troubleshooter consistently gives up and tells me to contact my Network Administrator and to check my settings after just a few moments of trying--but I haven't changed any settings and again, on rare occasion can connect for a brief period.  I have turned my firewall off and back on several times and checked for any sites that are blocked and it just has the default settings for my firewall set.  I have tried adding sites to be allowed through and removed them, it appears to make no difference.  I have rebooted several times, turned Airport off and back on again with no success.  I have went in to look at the system log files, but can't make sense of what it's telling me.  There are many things listed in the log file, from the Network Diagnostics(2154) that says check-in of Mach service failed..something about already active: com.apple.NetworDiagnostic.agent and another with nds_res_once returned -1007 to lots of browser components failing to connect with various messages (those only seem obvious given the fact there's no internet connection).   Again, there's no security on this wifi network and everyone around me is able to connect.  I have no problems connecting to other wifi networks at various locations and maintaining connections, but this is really the only non-secured one I try to connect to.
    What used to work, now isn't working and I haven't changed anything that I'm aware of on my end; I don't have access to the router nor quite possibly the network administrator (he's relatively new and extremely overworked and we are on completely different shifts).  I don't know the router make or model, but doubt very much that it's an Apple router.   I have to admit, I've always been a PC guy and am fairly proficient in configuring and running in that environment, but have been using this MBP the last year and liking it more and more as time goes by (until this incident arose)...but don't really have much knowledge of how to troubleshoot in the Mac environment.  Any help or suggestions for what I might do or try on my end would be very much appreciated--I would love to get connected again at that site!!
    Thx in Advance

    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Also try turning off Bluetooth

  • Error in SAP B1 8.8 licensing

    Hi,  I have completed the installation of B1 8.8 version. I have downloded and applied the 8.8 license in license server but B1 is still in 31 days trial mode. Please help me to reosolve this issue.

    Check if the installation no. in the license file is match with installation no. in the license manager --> general settings.
    If match, logon to B1 and if there is no license administration, you click end user license agreement --> click sign eula again.
    Restart the B1 client.  Go to module admin --> license admin --> tab allocation. Check if no users assigned with user and B1 user type license is empty. if it is empty and there is no license assigned to user then click change to assign license file info. Click Ok when finish and B1 will restart.
    JimM

  • Graph API licence assignment failed due to a strange error

    Hi, I'm looking for help in resolving quite strange issue on license assignment to a newly created user.
    I use Graph API v.2013-11-08 (tried with API v.1.5 with the same result) calls like :
    "https://graph.windows.net/{domain}/users?api-version=2013-11-08" + JSON body
    "https://graph.windows.net/{tenant}/users/{userPrincipalName}/assignLicense?api-version=2013-11-08" + JSON body
    to create new accounts and to assign licenses to it. While  account is created successfully license assignment can't be done because of the next error:
    Server response: {"odata.error":{"code":"Request_ResourceNotFound","message":{"lang":"en","value":"Resource '{userPrincipaName}/{or sometimes something like User_<alphanumeric String>}'
    does not exist or one of its queried reference-property objects are not present."}}}
    Actually this error is strange because:
    a) the account exists on the moment of the license assignment call;
    b) passed skuid exists and is valid;
    c) the error appears only on production environment, meanwhile the same account (same URLs, same data, same license skuid) can be normally created on another environment;
    d) the error appears only for one domain. If I do test for other domains it works on all environments. It means that the problem is not with the code  (all the API calls are performed within Java Web App), but with something different that i can't find;
    e) This error doesn't allow assign licenses to any users within one problematic domain using API calls, but they can be assigned to the same accounts in PowerShell.
    Can you please advise where to look and/or what may cause such a problem?
    Thank you.

    Hi kshp,
    Thanks for posting in MSDN forum.
    This is forum for developers discussing developing issues about
    apps for Office.
    Based on the description, it seems that you are developing with
    Graph API. I would like to move it to
    Azure Active Directory forum.
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
    Thanks for your understanding.
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Cannot allocate license to user

    Dear all,
    Desperately need some help / insight here. I have a server which I already successfully installed with SAP server and server tools. I also already import license file (permanent license file) into my server.
    The problem is, when I tried to allocate aforementioned permanent license to existing user, the check-box control which usually visible on : Administration - License - License Administration - "Allocation" Tab doesn't visible at all. However, in "Components" tab, I could see clearly list of licenses components along with total number, available licenses, start date, expiration date. But in "Allocation" tab, the "B1 user type licenses" column doesn't show any kind of licenses, therefore the check-box which located under "Used" column and "Available" column also doesn't exist (blank).
    I have read some post that suggest we click the "Change" button which located right over the B1 User type licenses grid to change the license, but unfortunately, the "Change" button in my server is disabled (cannot be clicked at all). I already tried to connect from many workstation to my server (one of my friend suggest me to try this, indicating the problem itself reside in SAP B1 client) but with no avail. But, if I connect from the very same workstation to my other server, the problem doesn't occur (I could easily click "Change" button and check / allocate the license to certain user). The bottom-line is, the problem seems happen only with my production server with permanent license.
    Could anyone please help me with this situation? Considering this occur at my production server, I'm really need some help here. Thanks in advance.
    Best Regards,
    Abel

    hi abelfaith
    i think you using more one database in server.  and license  assign on different data.  you check number license in tab Components ( license Professional User , Limited Financials User .... ) . u can detack database that not use  and restart server tool again.
    additional you can remove license file in path C:\Program Files (x86)\SAP\SAP Business One ServerTools\License (B1LicenseFile-....) and then import license file again. ( button change will visible )
    thanks
    H2

  • Business One user license and connected users

    Where in Business One, either application or SQL database, can I see all the license assignments for all the companies? If a user exists in one company but not another I have to search through both (or multiple) companies to see who has what type of license. License assignment spans companies, right? So is there a table in SBO-Common where this info is stored?
    Also, where can I see current users logged in to what companies? Is a value set in the company database in ousr or someplace else.
    TIA
    -Cindy Lange

    Hello Cindy,
    There is no specific table to see the license assignment either in common database or not. you could consider to use this path :
    C:\Program Files\SAP\SAP Business One ServerTools\License\B1Upf.xml
    to see the current user logged in to a certain company.
    Rgds,

  • Configuring RDS to specific NIC Adapter + Avoid Office 2013 Volume Licensing

    Background: Small Company basically 1 User (me)... I've recently purchased a new server class computer and have downloaded and installed Windows Server 2012 R2 Essentials.  I have 2 routers, 1 for home use (192.168..) and other provided to me by the
    company I contract to (10.41..).  I have a 4 port independent NIC card.  I connect to a company configured VM through a Remote Desktop Connection.  I also need to run Lync 2013 on the Windows Server 2012 machine in order to communicate internally
    with other members of the company.
    My Understanding: In order to configure the remote desktop connection to my VM to use a specific NIC adapter I must first install the Remote desktop Session Host service.  Then I should be able to configure the RDP-TCP connection to use a specific NIC
    adapter.  However, when I install the Remote desktop Session Host Service and I try and run Lync 2013 I receive an message stating that because I'm running Remote Desktop Services on this server I need to purchase volume licensing for my Office 2013 product.
    Question: Is there a way for me to configure my Windows Server 2012 R2 environment so that I can first specify a specific NIC adapter to use during my RDP session into my VM and also allow me not to have to purchase volume licensing for the Office 2013 product.
    -=Duane=-

    Hi Duane,
    As per my research, if you have RDS license and CAL installed still you need to purchase Office licensing to use office product. Office Professional Plus 2013 and Office Standard 2013 are licensed on a per-device basis. Users can only remotely access a copy
    of Office Professional Plus 2013 or Office Standard 2013 running on a network server from a licensed device. Therefore, your windows need the latest Office suite license assigned to the device.
    For more information.
    1.  Licensing Office on Remote Desktop Services
    2.  Microsoft Office
    For Network Adapter, you can try PowerShell Command and rename your NIC specific to RDS so that you can identify that specific NIC is used by RDS for connection. For that you can do following things.
    List of Network Adapter: Get-NetAdapter 
    Rename Network Adapter: Rename-NetAdapter -Name "Wired Ethernet Connection 4" PublicInternet1
    Please find below snap and link for more information.
    1.  Using PowerShell for NIC Configuration Tasks
    2.  Use PowerShell to Configure the NIC on Windows Server 2012
    Hope it helps!
    Thanks.

Maybe you are looking for