License problem after a cronacle DB restore

Hi,
I have a problem to import some script, procedure or package on cronacle, because of a invalid licence.
In fact since the cronacle database has been restored, I have these messages :
- In our importation script log:
JCS-00328: your license is not valid. Type SHOW LICENSE to examine license
- On the redwood shell :
This is a regular license.
Current database date: 08-APR-2009 14:23:41.
Activation date: 23-MAY-2008 15:47:40.
The license does not expire.
Have you ideas to resolve this problem?
Thanks,
Regards,

Hello Anton,
We have the same problem related in the first message of this thread.
We have the following message when we run the "show license" command :
This license moved or the environment changed.
        This is a regular license.
        Current database date: 01-DEC-2010 16:40:28.
        Activation date: 17-APR-2009 11:12:18.
        The license does not expire.
This message has been displayed since we had shutdown and started up the schedulers of the target environment of Cronacle.
Can you tell us if if we have to extend the license for 5 more days and then ask for another license when the current one does not expire ?
Thanks a lot for your answer.
Regards.

Similar Messages

License Problem after formating Hard Drive

Hello,
I'm french, so my english isn't very good, I'm sorry for this.
I have got a problem with my Adobe Photoshop Elements 8 license.
My Grandfather bought this software 5month ago and installed it in his computer.
He lend me the CD and I installed it in my computer too without any problems.
But Last month I had to format my Hard Drive, so I had to make a new OS installation too.
I tried to install adobe photoshop elements 8 but my License seems to be invalid.
I heard that a license can be used in only two computers. But the software is still on two computers (I just format my Hd), and the software doesn't seem to notice it.
How can I recover my license?

Thank you for your quick answer!
I entered my serial number at the installation (is that the right word for "set up"?) and there wasn't any problem.
But after I connect to the internet, this window appear
So I type my serial number (for the second time) and a red cross appear
And I can't go further.
The software may think that my key has already been registered in two computer. He think that my pc with a new OS is a different PC. But it's the same. (Sorry I'm not very clear^^).
My Key is a legal one.
I would like to remove the older key of the last os from the adobe database and used this key on my new OS.
I think, when we install an adobe software on a computer, if we change computer, we can delete it from the first one and use it on the new pc, it's not irreversible Am I right?

Licensing problem after migrating to new iMac

Hi,
I just recently got my new iMac and used restore/migration from a time-machinde backup of my previous Mac.
Now Logic asks me for my serial number and won't accept the one that is in my registration/serial/licensing information (and that worked before on my old Mac)
And I can't find any way to contact apple about this..
any ideas?
regards
hginfo
Message was edited by: hginfo

interesting
I have only seen migration assistant fail with Pro Apps
simple apps that don't install are fine but complex apps install stuff in libraries where migration assistant doesn't always look
it might work ok in the short term but doesn't always in the long term
but hey if you wanna risk it go for it

DI Server license problem after upgrading to SP01 PL4

Hi.
After I've upgraded to SP01 PL4 my Web Services that use the DI Server API do not work anymore. The SBO Client is working correctly and the DI Server and License Manager are running, too.
When I try to login with License Server DEVELOPERCOMP (my computer), I'm getting the Message 'Connection with License Server failed'.
Then I've read that you have to add the port number of the license server. So, I entered DEVELOPERCOMP:30000, but I'm getting the error 'License does not exist'. I'm using the manager account and it has the licenses Professional User, SAP AddOns and SDK Tools.
I've also turned the firewall off, but it this doesn't work.
It is really urgent, because one of our customers upgraded to SP01 and want to use our web services again.

Ok, everything works fine except one thing: I cannot get all keys of orders of one vendor. my code looks like this:
            Dim DISNode As New SBODI_Server.Node
            Dim sSOAPans, sCmd As String
            sCmd = "<?xml version=""1.0"" encoding=""UTF-16""?>"
            sCmd += "<env:Envelope xmlns:env=""http://schemas.xmlsoap.org/soap/envelope/"">"
            sCmd += "<env:Header><SessionID>" & SessionID & "</SessionID></env:Header>"
            sCmd += "<env:Body><dis:GetObjectKeyBySingleValue xmlns:dis=""http://www.sap.com/SBO/DIS"">"
            sCmd += "<ObjNum>oPurchaseOrders</ObjNum>"
            'if suppliername is "", return all open orders
            If SupplierName.Trim = String.Empty Then
                sCmd += "<PropName>DocEntry</PropName>"
                sCmd += "<Value>" & String.Empty & "</Value>"
                sCmd += "<Condition>bqc_NotEqual</Condition>"
            Else
                sCmd += "<PropName>CardName</PropName>"
                sCmd += "<Value>" & XmlProcessing.getStringXmlEncoded(SupplierName) & "</Value>"
                sCmd += "<Condition>bqc_Equal</Condition>"
            End If
            sCmd += "</dis:GetObjectKeyBySingleValue></env:Body></env:Envelope>"
            sSOAPans = DISNode.Interact(sCmd)
If I enter no vendor name, so that I get the keys for all orders, it works. But If I enter a vendor name, I'm getting an empty response.
The funny thing is that all other requests I'm doing are working. I can get a list of all vendors, I can search for an item by its item code, I can add an unscheduled receipt and so on. Before I upgraded to SP01 it has worked fine for several weeks.
Does someone has a clue?

Time Machine problem after restoring to a new HD (after my original HD failed)

I am running Lion 10.7.5 on a MacBook Pro Late '11
My HD was getting SMART errors, so I did a complete back up using Time Machine using a WD My Passport 1TB external, and then sent my MBP to Apple for HD replacement (under my Applecare plan).
I collected it yesterday and restored my system using Time Machine (using the data from my external HD) and everything was restored perfectly, which was great,
However, I'm now encountering a problem after plugging my external HD back into my MBP on the new system. Rather than Time Machine doing a swift 'top up' back up, it appears that TM is attempting to do a full back up. (I have 300GB and it took nearly 24hours to backup on the faulty drive) Is this normal after installing a new HD? Bearing in mind the Time Machine data is still on my external drive?
It's also appearing to be taking FOREVER to do this entire back up again. It is stuck on 'preparing back up' and when I do get some movement, it's doing a couple of KB's at a time and with no genuine back up progress.
Fundamentally, I just want to just top up my Time Machine back up without having do a complete back up, again. (which doesn't actually seem possible, viable at the min)
Any help / support would be much appreciated

AFAIK, it'll do that since the HD has a different UUID and the old TM backup won't recognize it. See Pondini's TM FAQs, for starters.

Help solve the problem after restor iphone 5 ios 7 asks email

Help solve the problem after restor iphone 5 ios 7 asks apple ID
I Forgot apple ID

Only one way- to remember it. There is no way around cause it is a new security feature. Better stress your memory.

Restore problem after upgrading, how to read the b...

Hi there,
I've a N95 and had Software version V11 on it. I made a backup and everything went well.
I then upgraded my N95 to V20 (not V12, i only could see V20) and tried to restore the backup afterwards...
Now the restore starts ok but after 67% it stops totally....
Anyone familiar with this ?
Then i read something about first upgrading to V12 then make a backup again (after a restore) because this would be compatable with v20 ?????
I now have V20 but no "restore", is there a way to "read out" the backup file ans selectivily restore items ?
thanks in advance,

Hi.
I am having the same problem now. When it restored, I can't reinstall PC Suite because fail to remove the new version. I tried removing via Control Panel. It was removed but yet it says fail to uninstall PC Suite. How else do you uninstall the PC Suite if not via Control Panel/ Add Remove Programs.
I tried installing the older version of the PC Suite but then it says that it cannot be done because there is a newer version installed.
Well, don't know what to do because I have tried getting advise from friends and that also fails.
Anyway, if there is anybody who can assist, I would be most grateful.
Cheers

New hard drive and photoshop license problem

I have a Dell Inspiron 6000 with a 1.5 Ghz Pentium processor, 2 GB of RAM, and Win Xp/Pro SP3.
The hard drive in this computer failed, and it has been replaced. I used an image backup from Acronis True Image 10 to "restore" the new disk.
Now, when I try to open Phostoshop CS2, I receive a message that the license is no longer valid (I have been using this version of Photoshop for a long time).
I don't have this problem with InDesign CS3 (v. 5.0.2), FrameMaker 7.2b144, or Acrobat 8.1.6.
I didn't find any helpful info on the "Product Activation" web page.
I tried a forum search and a search of Adobe.com using the search criteria "new hard drive and photoshop license problem."
The only relevant item I could find is this:
"Backup and restoration of your system using standard tools do not require reactivation. While reactivation after backing up or restoring the system was required in early versions of Adobe software (such as Adobe Photoshop® CS), Adobe has continued to improve the activation process with new technology that eliminates the need to reactivate after system restoration. In complex situations where the system is being upgraded, we recommend deactivating the Adobe software before commencing the system upgrade. Once the system upgrade is completed, the subsequent install/restore will require reactivation, which is typically accomplished without difficulty and is completely transparent to the user."
So does that mean I have to "reactivate" Photoshop CS2? If so, do I use the Activation window that is displayed when I open Photoshop? The serial number has 20 characters. Will the Adobe (re)activation recognize this old serial number? If not, what do I have to do to get this product usable again?
Please help.

>replaced your hard drive and CS2 DRM is looking for the old hard drive number and not finding it
Interesting... I use http://www.terabyteunlimited.com/image-for-linux.htm which creates a bootable CD and runs outside of Windoze
I have made image files and loaded those files to a new hard drive (I use drive swap hardware to make a backup and create a new drive every time I install or uninstall major software) and have never had any program complain about needing activation
But, since the program I use is Linux on a bootable CD, it copies EVERYTHING on a hard drive, even the hidden registration areas as far as I can tell, so when I do a restore to a new drive, everything is put on the new drive

Iphone 4 front camera not working even after reboot,resets and restore.

i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center

Iphone 4 network problems after 5.1.1 -

I'm wondering if others are having problems after updating to IOS 5.1.1. My Iphone 4 is constantly jumping from having 5 bars to 1, then saying it has no service for hours. I have gotten numerous messages saying MMS requires your phone number, after trying to enter my phone number it wouldn't save. A message saying that no calls can be made and the phone needs to be restored popped up, I restored the phone and the same problems still occur.

Restore it as a new device. Do NOT restore your backup. It's possible something there is corrupt and keeps coming back when you restore.
Set it up as new and test it out. See how it bahaves. If it's OK, re-install your apps (again, do not restore the backup, just re-install them) and sync your media over.
If it's not better after restoring it as a new phone, make an appointment at the genius bar.

Faulty Windows after 'successful' System Image restore to new hard drive.

This question posted as ' Cut down Win 7 after System Image restore to new HDD' in the community but no satisfactory answer. Please may I ask here.
Win reported a successful System Image creation of C: on my E: drive. C was replaced with a new 2TB drive (previously 1.5Tb) and the image restored. Win reported 'successful' restoration of C: immediately followed by the common 'You must restart
your computer to apply these changes...' which I assumed was just Win taking note of the new drive.
On running, everything seems fine at first but you start to notice faults. Most importantly Win doesn't seem to recognise itself. If you start some of the functions in control panel (eg System Manager) you get a message from User Account
Control 'Do you want to allow the following program from an unknown publisher to make changes to this computer?'.
Windows Live Mail won't work. You get a message 'Windows Live Mail could not be started. Closing Windows Live Mail. Your calendar contains corrupt data that is forcing Windows Live Mail to close (0x8E5E0247).' I have never used the
calendar function so there shouldn't be any data there.
Browsing history in IE is there on very first opening but is immediately lost and never recovered. Favourites are intact but all login details are lost. All your internet feeds are lost. Message 'The feed download was interrupted.....'
Trying to create new feeds is unsuccessful.    When you try and download something the usual IE message 'Do you want to run or save ... ' comes up at the bottom of the screen but the buttons do not work so you cannot get any downloads.
Installed non-Windows applications do seem to run OK though I usually switch back to the original drive pretty quick.
2 x Dell Precision T5500 desktops, both reasonably high spec and more or less identical though one is nearly 3 years old and the other approaching 4. Both Win7 x64. The fault identical on both machines. I have had these drives in and out
so many times trying to solve this there is a real risk of damaging the disk or lead. Can anyone suggest what might be wrong or how Win could be fixed?? I assume 2Tb is ok. Is it normal to get a restart message after a 'Successful' image
restore message. I've tried cloning the drive as well but got exactly the same messages and faults. Next I was going to try creating the image after running something like EndItAll and then seeing if the image would restore more successfully
to a different 1.5Tb drive though I don't see this should make any difference. 'Clutching at straws' comes to mind.
Thanks.

Hello, thanks for your interest.
Yes, principally it's the Windows features which are faulty. It's not that they don't work at all (except for win live mail which gives that message about being forced to shutdown), rather that there are faulty features.
All of the functions in control panel, for example, work OK. But when you select them there is this message from user account control ' Do you want to allow the following program from an unknown publisher to make changes to this computer'.   It
then goes on to give details the oddity being that the publisher is listed as 'Unknown'. This is the standard User Account Control dialogue but the strange thing is that it is not recognising the functions coming with windows.    If you
click yes it goes on to open device manager or whichever one it was that you wanted and the function works quite normally.
Non windows applications (including Microsoft Office) run normally without the user account control dialogue. The only oddity I noticed today was that one program seemed to have lost it's licencing information and gave a message that the
month trial period was up with an invitation to licence.
Today I tried to restore an image to a replacement 1.5TB disc. (i.e. the same size as the image was made from). The whole process went quite smoothly and Windows seemed to be working without the faults on the replacement drive.     So
having shown that the image must be OK I tried swapping the 1.5 drive for the 2Tb drive and repeating the restore from the same image.   Immediately on running, Windows gave me the message 'You must restart the computer to apply these changes....
(which it had not done for the 1.5Tb restoration) and all the old faults were back.   The message might be quite innocent and simply indicate that Windows is taking note or the different size drive but it seems to be associated with the arrival of
the faults. (The new drive is formatted as for the 1.5Tb with C: and Recovery partitions and the extra space left unallocated).
No, I have not tried Reinstalling Windows Live Mail yet. Today I was working on the newer machine and my mail is on the older one. It is odd that both machines show exactly the same problem. It must be something to do with the move to a different size disk.   I
guess I would have to reinstall IE as well as that was the other application that was really faulty.
Yes, that is the thread I tried in the community but I didn't get any solution.

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Can't access old backups after reinstalling Lion and restoring with Migration Assistant

Scenario: App Store developed a random, repetitive, failure to update certain apps. After trying two different solutions which only worked for a couple of weeks (including archive uninstall) Apple Support and I decided to go the full hog and do a full Lion reinstall. Did a full final backup with TM and proceded to reinstall from the recovery partition. All went well. I gave my new account the same name as my old original one (and this might be the root of the glitch I will describe). When Lion was working again I used Migration Assistant to recover all the users, applications, and information.
As my new main account and my old one (coming from Mig Assist) had the same name, MigAssist asked if I wanted to merge them. I said "yes". All fine. Everything was apparently there.
Later that day I tried to access my bank and discovered that my 1Password db was an old version. I went to TM to retrieve the one from my pre-reinstall backup. As I had mapped my mac back to the sparsebunddle file in TC it seemed I had access to all my files going back 1.5 years. It showed my oldest backup as Sep 2010 and 700 gb used. All seemed normal.
Unfortunately, the purple bars before the moment of reinstall are all faded and I can't retrieve any information from them. Nothing before that moment is available, not from the Finder or from withing any other application.
My new merged main user appears as "carlos 1" when it should have been just "carlos".
Do you guys have any advice that could help me? Thank you in advance.
My TC is a 1TB 2009 one.

Carlos. wrote:
As my new main account and my old one (coming from Mig Assist) had the same name, MigAssist asked if I wanted to merge them.
No, there is no "merge" option:
You can rename or replace, not merge.
Unfortunately, the purple bars before the moment of reinstall are all faded and I can't retrieve any information from them. Nothing before that moment is available, not from the Finder or from withing any other application.
My new merged main user appears as "carlos 1" when it should have been just "carlos".
You have two separate accounts now.
See Problems after using Migration Assistant for an explanation of what's happened (the blue and pink boxes) and a possible fix in the tan box -- but that won't work if you've done any backups since using Migration Assistant.
If you have done backups, your best bet is to do a full system restore, selecting the last backup from before you did the Migration. See Time Machine - Frequently Asked Question #14.

Any fix for random art and song order problems after adding new music?

If I sync my touch with itunes as a restore, all cover art, albums and playlists are correct. Once I add anything new or make a change and re-sync, random cover art is missing and random songs are in the wrong order. The only way to fix the problems is through a complete restore. Has anyone else had this problem or figured out a fix? I am using the latest itunes on a PC with XP.

A few issues, but sorry let me try to understand.
Adding new music, 'XXXX's iPod cannot be written or read'' can you let me know the number. most likely music format is not iPod Compatible like HE-AAC.
started skipping songs - these are normally due to corrupted ID3 tags, try converting them -File-> Advance -> IPOD version or use MP3 validator to fix all songs in the library. (My Apologies, only work for MP3 music that skipped)
As for item 2, you can try Hard Reset if you like to download MP3 validator.
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!

White screen problem after updating to 1.1 firmware

My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP

License problem after a cronacle DB restore

Similar Messages

Maybe you are looking for