Light is out and it appears to be dead.
My time capsule's light is out and it appears to be dead. Can anything be done to fix it?
If you have AppleCare on any of your Macs, the Time Capsule might be covered.
Take the Time Capsule to an Apple Store....if you have one in your area.....or contact Apple Support directly to discuss your options
http://www.apple.com/support/contact/
If the Time Capsule is not covered by AppleCare, Apple will not offer repairs, but there are some independent agents that can do this for you. Look under Time Capsule Repair in this link, originally posted by forum expert LaPastenague:
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s
Similar Messages
-
My/keyboard/green/light/goes/on/and/off./The/space/bar/and/caps/lock/keys/do/not /work/.I/have/100%/battery/life.I/show/connected/to/bluetooth.Anyone/know/the/ap proximate/life/of/a/keyboard?Mine/is/about/4/years/old.Using/an/iMac/about/4/yea rs/old,too.
Could be an early retirement problem. There is no fixed lifespan for anything, as you know. Find a friend with a keyboard and test that in your machine. That will show if it is your keyboard or your computer. We can progress from there.
-
Status light goes out and does not return after Apple TV is turned ON
HI, my recently purchased and updated to the newest software Apple TV does not display the status light in front of the unit. For a couple of weeks everything worked fine until last night when I turned the unit back on. Normally soonest you select a HDMI output the status LED comes ON. That did not happen last night. The LED did not light up at all, no mater what I did. After several different attempts; reset, powering down, disconnecting from AC and unplugging HDMI did not help. Then, after I turned my television OFF, few minutes later the light came ON on it's own. What could be causing it. I just replaced this particular unit for failing to remember my Wi-Fi network several days ago. What is going on with the Apple TV's? Thanks for help.
even i am also facing a similar problem. i have macbook air, ipad2, iphone4S and iphone5S and apple tv. i updated my iPhone 5S and ipad2 to ios8 where as iPhone 4s is still running on iOS 7.1.2. i updated my apple tv as well. when i connected apple tv to the same router as other devices, only iPhone 5s shows the option of airplay where as no other device is displaying it. i hv tried all other devices....changed the settings and rebooted and restarted each one of them but nothing doing. that makes me wonder is it a problem with the software update of apple tv as i can successfully connect my iphone5s but not other devices. apple tv was running very successfully till recent past, primarily before all these updates came. i hv successfully mirrored from my macbook air, iPad and iPhone 4s. but now nothing seems to be working. can anyone help me out pls
-
I write my serial number correctly to download Light Room 5 and it appears incorrect. What can I do?
I write my serial number correctly. It appears incorrect. I have my Lightroom 5 in my Mac, and now I want it in my mac book. What can I do?
Don't write the serial number, instead use copy and paste.
-
IPhone 5s cuts out blue screen appears then Gos Dead
fone cuts out on me when making calls or on Internet then Gos to a blue screen then the White screen with Apple logo then shuts down and will not come back on t
Hello, Obeynelson.
Thank you for visiting Apple Support Communities.
I understand your iPhone restarts on it's own and will not power on. I would start with the troubleshooting steps that I have attached below. Try these steps and please reply back if the issue persists.
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, see the section labeled Issue not resolved.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
Jason H. -
Why is my phone displaying a pink screen and has appeared to be dead?
I tried to upload some photos today and for some reason it tried to synch with itunes and iphoto then went dead. Please tell me there is hope. How do I revert it back to working again?
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, restore your iPhone > iTunes: Restoring iOS software -
Hi,when I tried iPad 2 reset blue light came out what can I do after?
When I tried iPad 2 reset only blue light came out and the screen become black again what can I do? Please help
Try a reset:
Hold the Sleep and Home button down until you see the Apple logo. -
I recently transferred itunes library from windows XP PC to new Windows 7 PC. The transfer was successful, however when I plug my 3rd gen Ipod Nano into the new PC, the Ipod icon appears along with the music, playlists, etc. The songs are shown but are 'grayed out' and wont play or sync.The 'Devices & Printers' window in new PC shows icon for Ipod driver & is OK. The icon for the Ipod appears but depicts a delta shaped warning icon that states that the Ipod is'not operating properly'. Tried troubleshooting. The troubleshooting message states the the Ipod is 'disconnecting'. Can you help me with this problem?
Then, I dropped the entire itunes file from the old PC (XP) into an empty external drive.
That "itunes file from the old PC"? Is that the iTunes folder, from the old PC, that was in the user home folder's Music folder?
All of the library, playlists, etc. from the ipod as they always have been are shown, by they are 'grayed out' and will not open or play.
That's on the iPod, correct? Are all of your old playlists in iTunes, from the old PC, still there in iTunes on the new PC? Are the songs in iTunes still playable?
This document provides the steps to transfer a complete iTunes library between two computers. See the section called External drive.
iTunes: How to move your music to a new computer - Apple Support
There are many steps, but this is a summary. (1) On the old PC, consolidate all of your iTunes data into the iTunes folder. (2) Copy this iTunes folder to the external drive. (3) On the new PC (that has iTunes installed but NOT running), replace its existing iTunes folder with the one from the old PC (on the external drive). When you run iTunes, it uses the iTunes folder from the old PC, and it should look like iTunes on the old PC (with all the playlists, ratings, play count, etc.), and your iPod will see the iTunes library as the same iTunes library (because it is the same library).
If you did something different, and the old PC is still accessible, you may want to try it using the method from the linked document. -
I am trying to create a simple animated gif in Photoshop. I've set up my frames and want to use the tween to make the transitions less jerky. When I tween between frame 1 and frame 2 the object in frame two goes out of position, appearing in a different place than where it is on frame 2. Confused!
Hi Melissa - thanks for your interest. Here's the first frame, the second frame and the tween frame. I don't understand why the tween is changing the position of the object in frame 2, was expecting it to just fade from one frame to the next.
-
When I plug in apple tv the status light just blinks amber and nothing appears on the screen
When I plug in my apple tv (first gen) the status light just blinks amber and nothing appears on the screen. The status light never turns white and won't stops blinking amber. I've tried to over ride this with the remote, resetting it and trying to revert it to the factory settings. Is there a way to wake it up or is it a lost cause?
Welcome to the Apple Community.
The system looks like it's unable to start up, this could be software but more likely hardware, either way unless it will start up there is nothing a user can do to resolve this. -
when registering my iphone on itunes the message - the sim card insertedin this iphone does not appear to be supported - can anyone shed some light on this and tell me a way around this problem? the phone itself is an english phone and tried to register with a spanish sim and that message appeard, so i tried with my iphone sim which is english and the same message appeared!
thanksIs the English sim from the original carrier as that is usually the message you get with a carrier locked phone.
-
Well, i was on my laptop now and all of a sudden a pop up message appeared and said "your download is complete" so i went to go check it out and it was 'MacProtector'. i cant delete it and it keeps opening unwanted web pages, please help me sort this out someone?
Refer to: http://cantalktech.com/2011/05/08/mac-protector/.
-
Any ideas how to get my software updated on my IPOD 3rd Generation when my computer times out? I have tried several times and it appears to take 30 plus hours. How Frustrating, not to mention the kids are too!
If the iTunes purchases are not in your iTunes library you can redownload them by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you restore from backup, not that synced media like apps and music are not included in the backup and thus if those items are not in the iTunes library they can't be restored to the iPod during the latter part of the restore process. -
hey plz help me out!! i am using macbook pro 10.5.8..... and was using photobooth...and then after some time i opened it and there was no green light on cam, and it displayed nothing! plz tell me how to fix it! i want to see my face again!!! plz help me
iSight troubleshooting
http://support.apple.com/kb/HT2090 -
Tried to install eBay app two days ago. Still hasn't installed, is grayed out and says waiting... When I tried to uninstall it shakes, but no X appears. How do I get rid of this app? eBay app was from the App Store.
Try restarting your devise by holding down the power button and the home button. The uninstalled app should disappear after a little while.
Hope this helped
Maybe you are looking for
-
URGENT ! Is it possible to create a xml data control description file
We are encountering serious problem when generating data control against java bean build from java classes generated with xml top link mapping. As workaround we have created a new xml schema that generate the java classes in a way data control may be
-
How to set India localization in apps?Is it present by default in 11.5.10?If not then how to get it? Regards, Sandeep
-
Hello, I wish for all Word documents to open in the browser for my SharePoint document library on my team site. The feature 'open in client application' is not activated in Features for the site collection and the setting in the document library is s
-
Not able to change Framework page in Netweaver portal 7.3
Dear All, I am trying to change the framework page from drop-down, changes not affecting after saving the framework page and every time when i am changing, the object is getting locked, after unlocking still the chages are not affecting Please help m
-
Problem with UI State !!! URGENT
I have a component Like a UITabbedPane and I have decided to store the selectedPane in the UI state. I have implemented the StateHolder interface on the UITabbedPane. Through the TabbedPaneRenderer i also render a hidden field that stores the current