Light tables and multiple items
I am trying to discover how to add an image to a light table more than once.
Both Apple's documentation and the Luna book say it's possible but I don't quite get the trick involved.
Ian,
Rather the other way around. I'm pretty sure I
remember dragging Versions onto a light table
multiple times before 1.5.
I did a clean install back to v1.1 to test this and it doesn't work there either. Either Long & Luna were confused and when they wrote that part of the book and mistook a feature of Aperture books where you can use an image more than once or they had advice from Apple about a feature that didn't get implemented.
I think the ability to have an image master or version appear in a single light table more than once would be a useful feature. I will use Aperture feedback to tell Apple this.
On a related note I called Apple Care tech support for the Aperture application and asked them: "How should the program work in this area?"
I wanted to see if what I was observing was the normal behavior.
The response I got from Tech support was so STUPID that I was astonished! The rep told me to first delete my plist file then export all my image masters and create a new library and reimport the masters. I told him that procedure would loose all of the metadata and adjustments Aperture contained for my 28,000 master files, throwing away 100's of hours of work. He said it was the only way to find out if I could add a image multiple times to a light table.
The rep didn't really seem to know much at all about Aperture and when I challenged him on this point he defended himself saying that he had to support all the pro apps and couldn't really know much about any of them. He concluded by saying that if I wanted to find out how the program was supposed to be working I would have to call tech support at Peachpit since they published the Long & Luna manual.
It was a very dissapointing response but I probably shouldn't have been too surprised. Non existent tech suppport is the norm for our times. I did expect Apple to do a bit better though.........
Similar Messages
-
Dear all,
I have a input that looks like this:
HeaderKeySomeHeaderInformationItemKeySomeItemInformationItemKeySomeItemInformation...
Here's the actual input
TEHGMESS0026000000288S0001TEI2____026200006112410400000000 18010000000000 00126000000000126000120600000000002000000000 000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000JTEI2____026200006112410400000000 19010000000000 00126000000000126000120600000000002000000000 000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
HeaderKey = TEHGMESS
ItemKey = TEI2____
Is it possible to process this via MessageTransformBean (my actual scenario is JMS to IDoc)? I already tried but I only succeeded when having new lines in my input to separate between Header and (multiple) Items.
So when the input and my configuration looks like below it works, but when I only have a single row input it doesn't work, even when specifying xml.recordHeader.endSeparator = '0' / xml.recordItem.endSeparator = '0'. I even tried xml.endSeparator = '0' but no luck.
Input that works
TEHGMESS0026000000288S0001
TEI2____026200006112410400000000 18010000000000 00126000000000126000120600000000002000000000 000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
TEI2____026200006112410400000000 19010000000000 00126000000000126000120600000000002000000000 000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
Matching configuration that works for input which structures are delimited by new line.
Paramentername
Parametervalue
Transform.Class
com.sap.aii.messaging.adapter.Conversion
Transform.ContentType
text/xml;charset=utf-8
xml.conversionType
StructPlain2XML
xml.documentName
MT_TEI2Split
xml.documentNamespace
http://hansgrohe.com/pi/MQ/TEI2/10
xml.keyFieldName
SATZARTKey
xml.keyFieldType
CaseSensitiveString
xml.processFieldNames
fromConfiguration
xml.recordHeader.fieldFixedLengths
8,4,9,1,4
xml.recordHeader.fieldNames
SATZARTKey,SATZLENHG,NUTZLEN,MESSAE,MESSNR
xml.recordHeader.keyFieldValue
TEHGMESS
xml.recordItem.fieldFixedLengths
8,4,2,10,8,19,3,3,2,10,6,2,10,6,2,10,6,6,6,6,6,11,9,2,10,6,2,10,6,3,4,3,7,14,8,1,31
xml.recordItem.fieldNames
SATZARTKey,SATZLEN,BUCHART,TRNR,ANDGNR,MITEM,TEIVARI,BSTSTATU,REFTYP,ORNO,POS,REFTYP1,ORNO1,POS1,CHATYP,CHARGE,CHAPOS,ABBVONL,ABBNACH,ZUBVONL,ZUBNACH,I2MENG,I2BUNR,REFTYPN,ORNON,POSN,REFTYP1N,ORNO1N,POS1N,BSTSTATN,ABUSERAB,ABUSERFN,ABUSERNA,I2TIME,I2LIDNR,I2FMCODE,FILLER
xml.recordItem.keyFieldValue
TEI2____
xml.recordsetName
records
xml.recordsetStructure
recordHeader,1,recordItem,*
Any clues on this? Is it even possible to have multiple structures in one row? Many thanks in advance
JensSAP came back to me with this answer:
First, I would like to point the documentation for Message Transform
Bean (MTB) in 7.4:
http://help.sap.com/saphelp_nw74/helpdata/en/57/0b2c4142aef623e10000000a155106/content.htm?frameset=/en/57/0b2c4142aef623e10000000a155106/frameset.htm¤t_toc=/en/45/0ea2de423c2d6be10000000a11466f/plain.htm&node_id=18
As it is written at the beginning of this document, MTB is used to
call classes written for the Plain Adapter Engine. So you may find
additional documentation about the parameters for convertion in the
documentation of the Plain Adapter Engine
(http://help.sap.com/saphelp_nw74/helpdata/en/0d/00453c91f37151e10000000a11402f/content.htm?frameset=/en/1b/d5ef3b1ad56d4fe10000000a114084/frameset.htm¤t_toc=/en/75/246b3de666930fe10000000a114084/plain.htm&node_id=11).There it is written that the structures by default are
arranged line-by-line. The endSeparator just adds additional character
string as a separator after the last column in a row.
I hope that this answers your question. MTB expects the data to be
structured line by line.
You may add a custom module, which transforms the message in the
expected format.
If you have a look at the second link there's even a more precise wording that multiple structures within one line are not supported:
xml.NameA.endSeparator
Even if no specification is made here, a line break must follow since substructures are always expected as a line of the document.
Bottom line is that it's not supported by now and verfied by me with PI 7.4 SP5
Many thanks to Ambrish, Amit and Hareesh for the valuable input. Will probably try to work things out for now following Ambrish's / Hareesh's suggestion as this seems easier to implement. Amit's proposal with a dedicated module however would probably be the more polished solution.
Cheers
Jens -
ALV for one header and multiple item table
Hello All,
I have a requirement to display records from one header and three item table using ALV.
The output should be such that
1-line - record from header table
followed by - records from the 1st item table(can have multiple entries corresponding to a header record and each should be displayed on separate line)
followed by - records from 2nd item table(can have multiple entries corresponding to a header record and each should be displayed on separate line)
followed by - record from 3rd item table(can have multiple entries corresponding to a header record and each should be displayed on separate line)
Can you help me out.
Thanks and regards,
Subramanian.hi
data population is same for alv or normal reporting.
First you select the data from header
select from item data using for all entries in it_header where....
select item 2
selct item 3
loop a it_header
read item1
read item2
read item3
check sy-subrc
move to i_final
then build fieldcatalog and display..
look the example
SELECT PERNR
STELL
WERKS
ABKRS
ENAME
ENDDA
BEGDA
ORGEH
PERSG
PERSK
KOSTL
FROM PA0001
INTO TABLE I_PA0001
WHERE PERNR IN S_PERNR
AND ABKRS IN S_ABKRS
AND PERSG IN S_PERSG.
SELECT SPRSL
STELL
ENDDA
STLTX
FROM T513S
INTO TABLE I_T513S
FOR ALL ENTRIES IN I_PA0001
WHERE STELL = I_PA0001-STELL AND SPRSL = 'EN'.
SELECT PERSA
NAME1
FROM T500P
INTO TABLE I_T500P
FOR ALL ENTRIES IN I_PA0001
WHERE PERSA EQ I_PA0001-WERKS.
LOOP AT I_PA0001 .
READ TABLE I_T513S INTO WA_T513S WITH KEY STELL = WA_PA0001-STELL
SPRSL = 'EN'
ENDDA = WA_PA0001-ENDDA.
IF SY-SUBRC IS INITIAL.
MOVE WA_T513S-STLTX TO WA_FINAL-STLTX.
ENDIF.
V_SNO = V_SNO + 1.
Read Value For Personal area Text.
READ TABLE I_T500P INTO WA_T500P WITH KEY
PERSA = WA_PA0001-WERKS.
IF SY-SUBRC EQ 0.
MOVE WA_T500P-NAME1 TO WA_FINAL-NAME1.
ENDIF.
FORM DISPLAY_DATA .
--BUILDING FIELD CATALOG--
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = V_REPID
I_INTERNAL_TABNAME = 'I_FINAL'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = V_REPID
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = I_FCAT[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*--Modifying titles of Field Catalog--
READ TABLE I_FCAT INTO WA_FCAT WITH KEY FIELDNAME = 'S_NO'.
IF SY-SUBRC EQ 0.
WA_FCAT-REPTEXT_DDIC = 'X'.
WA_FCAT-SELTEXT_S = TEXT-041.
WA_FCAT-SELTEXT_M = TEXT-041.
WA_FCAT-SELTEXT_L = TEXT-041.
WA_FCAT-OUTPUTLEN = 3.
WA_FCAT-JUST = 'L'.
MODIFY I_FCAT FROM WA_FCAT INDEX SY-TABIX.
CLEAR WA_FCAT.
ENDIF.
do for all the fields u want to display..
Award points if useful. -
Updating multpile tables and multiple rows - JDBC adapter
Hi,
The scenario is like this. i receive an Idoc which has header information and various line items (multiple occurrance of a segment). the hearder details have to be sent to one table, TableA, and all line items has to go to another table, TableB, and for each line item, a new row has to be inserted in TableB.
How can i acheive this using JDBC adapter? how should my data type look like? what are the settings i need to do in adapter config?
Thanks and Regards,
RashmiHi Rashmi,
You can use the following link for the JDBC adapter call :
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
You need to provide the JDBC Driver, Connection,User Name and the password.
The data type structure you can take from the Bhavesh blog:
JDBC Receiver Adapter -- Synchronous Select Step by Step
Since you just need to update the tables, take only the sender side of the blog, i.e. the request part and configure the scenario accordingly.
Regards,
Sanjeev. -
Dear All,
My database is 11gR1 and Linux is the platform.
I have more then 50 very important tables and around 15 database users.
I want to implement fine grained auditing on these important tables.
This is how I am going to implement it:
SQL>BEGIN
DBMS_FGA.add_policy(
object_schema => 'Scott',
object_name => 'SAL',
policy_name => 'SALARY_CHK_AUDIT',
audit_condition => NULL,
handler_schema => 'imran',
statement_types => 'SELECT,INSERT,UPDATE,DELETE',
audit_column => NULL);
END;
what is i have to pass multiple tables in object_schema and multiple users in handler_schema.
I hope i am able to clear my question, any doubts please let me know.
Regards, ImranHi,
object_schema - The schema of the object to be audited. (If NULL, the current log-on user schema is assumed.)
in case if you like to audit for multiple users - then try to test by holding a null value and test access the important tables -where the relevant auditing records are generated as per your requirement or not. i have not tested.. try it
- Pavan Kumar N -
Hello,
I was recently trying to drag image(s) from a stack to a "light table" folder. What happens is that is moved the entire stack in the "light table" folder, instead of the one or two specific image(s) I would like to have in the "light table "folder.
Moreover, once in the "light table" folder, I can't drag one or two specific image(s) from the stack without having the whole stack on the light table... In order to achieve this, I have to unstack these images... but they get unstacked in the original project folder as well !!!
Thanks for your feedback...
And happy new year !
Seb.Sébastien -- this is by design. Stacks are designed to
- keep images together
- have only one "pick" for each Aperture container.
They are the virtual manifestation of the old practice of (literally) stacking nearly identical slide versions of a shot while sorting on a light-table, with the best of the set on top.
Because of the way Stacks are implemented, it makes sense to use them only for sets of images which are
- very similar
- will have only one "pick".
I use Stacks for the following:
- same shot with minor camera setting changes (aperture, exposure duration, ISO, etc., but not usually changes in composition)
- rapid fire shots. If I get two or more good shots, I split the Stack.
- bracketed sets. Once I have created a new image from the bracketed shots, I import it, add it to the Stack, and make it the "pick".
I also use Stacks for Versions. Here logic and rigor break down. (I have recommended that Apple allow for a special type of Stack for stacked Versions.) Almost always, I will end up with one "pick" from the Versions. Once in a while though (often with cropped details) I will end up with more than one "pick". The only thing to do then if you need to use more than one pick in an Aperture container, is to split the Stack. This severs the Version from its siblings. I don't like that -- but that's how it works.
Note that Light-tables in Aperture are just a special instance of an Album.
What Frank was trying to get you to see is that it's your use of Stacks which is causing your problem. There is nothing to be gained from putting the images you want in a Light-table in an Album first. -
SQL query for join table and multiple values
Trying to join two tables , Emphours and EmpStatus to get
result which gives each emplyees hour
worked each day
in past say 1 year in what status. I need result similar to table 3 , Hours Can also be grouped per week
all I need Is Each employees hours in each week and his status and position at that time if possible
any help will be highly appreciated. Thank you
note: payday is every other Friday- week runs from Saturday through Friday
EmpStatus Table tracks when employees status changed
EmpHours
employee
workday
payday
hours
position
101
1/1/2014
1/3/2014
8
assistant
101
1/3/2014
1/3/2014
8
assistant
101
1/4/2014
1/17/2014
8
assistant
101
1/5/2014
1/17/2014
8
assistant
101
1/7/2014
1/17/2014
8
assistant
101
1/8/2014
1/17/2014
8
assistant
101
1/9/2014
1/17/2014
8
assistant
101
1/11/2014
1/17/2014
8
assistant
101
1/13/2014
1/17/2014
8
assistant
101
1/14/2014
1/17/2014
8
assistant
101
1/18/2014
2/14/2014
8
assistant
102
1/1/2014
1/3/2014
7
manager
102
1/25/2014
1/31/2014
7
manager
102
1/26/2014
1/31/2014
7
manager
102
1/28/2014
1/31/2014
7
manager
102
1/31/2014
1/31/2014
7
manager
103
1/1/2014
1/3/2014
5
intern
103
1/31/2014
1/31/2014
6
intern
104
1/14/2014
1/17/2014
5
supervisor
104
1/30/2014
1/31/2014
6
supervisor
EmpStatus
employee
start_date
status
101
1/1/2014
parttime
101
1/18/2014
fulltime
102
1/1/2014
seasonal
102
1/18/2014
fulltime
103
1/1/2014
partime
103
1/18/2014
fulltime
104
1/4/2014
parttime
104
1/18/2014
fulltime
Table 3
employee
status
hours
position
workday
weekend
payday
101
parttime
8
assistant
1/1/2014
1/3/2014
1/3/2014
101
parttime
8
assistant
1/3/2014
1/3/2014
1/3/2014
101
parttime
8
assistant
1/4/2014
1/10/2014
1/17/2014
101
parttime
8
assistant
1/5/2014
1/10/2014
1/17/2014
101
parttime
8
assistant
1/7/2014
1/10/2014
1/17/2014
101
parttime
8
assistant
1/8/2014
1/10/2014
1/17/2014
101
parttime
8
assistant
1/9/2014
1/10/2014
1/17/2014
101
parttime
8
assistant
1/11/2014
1/17/2014
1/17/2014
101
parttime
8
assistant
1/13/2014
1/17/2014
1/17/2014
101
parttime
8
assistant
1/14/2014
1/17/2014
1/17/2014
101
fulltime
8
assistant
1/18/2014
1/24/2014
2/14/2014
102
seasonal
7
manager
1/1/2014
1/3/2014
1/3/2014
102
fulltime
7
manager
1/25/2014
1/25/2014
2/14/2014
102
fulltime
7
manager
1/26/2014
1/26/2014
2/14/2014
102
fulltime
7
manager
1/28/2014
1/28/2014
2/14/2014
102
fulltime
7
manager
1/31/2014
1/31/2014
2/14/2014
103
parttime
5
intern
1/1/2014
1/3/2014
1/3/2014
103
fulltime
6
intern
1/31/2014
1/31/2014
2/14/2014
104
parttime
5
supervisor
1/14/2014
1/17/2014
1/17/2014
104
fulltime
6
supervisor
1/30/2014
1/31/2014
1/31/2014Hello David,
Try this query
set dateformat mdy;
declare @EmpHours table
(Employee int,workday date,payday date,hours int,position varchar(50));
insert into @EmpHours values
(101,'1/1/2014','1/3/2014',8,'assistant'),
(101,'1/3/2014','1/3/2014',8,'assistant'),
(101,'1/4/2014','1/17/2014',8,'assistant'),
(101,'1/5/2014','1/17/2014',8,'assistant'),
(101,'1/7/2014','1/17/2014',8,'assistant'),
(101,'1/8/2014','1/17/2014',8,'assistant'),
(101,'1/9/2014','1/17/2014',8,'assistant'),
(101,'1/11/2014','1/17/2014',8,'assistant'),
(101,'1/13/2014','1/17/2014',8,'assistant'),
(101,'1/14/2014','1/17/2014',8,'assistant'),
(101,'1/18/2014','2/14/2014',8,'assistant'),
(102,'1/1/2014','1/3/2014',7,'manager'),
(102,'1/25/2014','1/31/2014',7,'manager'),
(102,'1/26/2014','1/31/2014',7,'manager'),
(102,'1/28/2014','1/31/2014',7,'manager'),
(102,'1/31/2014','1/31/2014',7,'manager'),
(103,'1/1/2014','1/3/2014',5,'intern'),
(103,'1/31/2014','1/31/2014',6,'intern'),
(104,'1/14/2014','1/17/2014',5,'supervisor'),
(104,'1/30/2014','1/31/2014',6,'supervisor');
--select * from @EmpHours
declare @EmpStatus table
(employee int,start_date date,status varchar(20));
insert into @EmpStatus values
(101,'1/1/2014','parttime'),
(101,'1/18/2014','fulltime'),
(102,'1/1/2014','seasonal'),
(102,'1/18/2014','fulltime'),
(103,'1/1/2014','partime'),
(103,'1/18/2014','fulltime'),
(104,'1/4/2014','parttime'),
(104,'1/18/2014','fulltime');
WITH C AS
SELECT es.employee,es.start_date, es.status, ROW_NUMBER() OVER(partition by employee ORDER BY start_date) AS rownum
FROM @EmpStatus ES
CTE_RANGES as(
SELECT cur.employee,Cur.start_date start_range, cur.status,case when nxt.start_date is null then '2099-12-31' else dateadd(d,-1,Nxt.start_date) end AS end_range
FROM C AS Cur
left JOIN C AS Nxt
ON Nxt.rownum = Cur.rownum + 1 and cur.employee=nxt.employee)
select eh.*,es.status from @EmpHours EH join CTE_RANGES Es on EH.Employee =es.employee and EH.workday between es.start_range and es.end_range
--where es.employee=101
You will need a calender table too which can be joined to the output of the above query to get the weekend dates.
You can find the T-SQL code to generate the calender here
http://stackoverflow.com/questions/19191577/t-sql-function-to-generate-calendar-table
and posting the questions with necessary DDL , DML (like I have posted) would help us a lot.
Satheesh
My Blog -
Nested Tables and Multiple Pages
Hi,
I have a problem with nested tables that span multiple pages.
Lets assume I want to create a list of orders. Each order contains several order items. As long as an order contains less order items than fit to one page the list is rendered correctly. But if an order contain more items all items that can´t be displayed at the first page are cut off.
I´ve tried so many combinations of subforms with flow content and position content, subform sets and "Allow Page Breaks within Content" as well as Layout Property "Expand to fit" but nothing helped.
Can someone tell me if and how I can achieve this. In the meantime I do work in Designer directly with a XML datasource. So I could send you the form and example data.
I´m working with NW04 SP11 and Adobe Designer 6.0
Best regards
HelmutHello Helmut,
There are some limitations and bugs in your requirement.
Please see the output after copying into notepad.
1.Eventhough if you give overflow leader , the headers for item table will not repeat.it is a bug.this is not solved in designer 7.1 also.
2.There are some accessibilty bugs in case of nested table.
Please follow the below design in the hierachy tab.
MainTable (subform)
|---- Header (subform)
| |- Header texts for Main table +
| |- Text for nested table
|---- DATA_main (subform)
|-Main table fields
|-ITEMDATA ( Table SUBFORM)
|-Header (Subform)
| |-ItemHeader texts
|-DATA_item (subform)
|-Item data fields
for DATA_main and DATA_item subforms, set repeat count MIN in binding tab.Set all flow content and allow page break with in the content.
The output will appear in the following manner.
<b>( Copy the below text into the notepad. )</b>
<b>Order no. text customer
Order items</b>
=================================================================
1 Computer Mr. Smith
<b>Order item no. short text quantity price</b>
10 PC Tower 1 400.00
20 LCD Display 1 200.00
30 Keyboard 1 15.00
40 Mouse 1 10.00
2 Notebook Mrs. Parker
<b>Order item no. short text quantity price</b>
10 HP Notebook 1 600.00
20 Ext. hard drive 1 80.00
let me know if u didnt get the solution.
Thanks and Regards,
Pavan Meda -
When I select Bookmarks, the menu item (Bookmarks) is highlighted in light gray color; and the letters of the work itself (Bookmarks) turns white. This same thing happens when you go into individual bookmark selections. It is very difficult to read. Are there any alternatives that can be set by the user?
Are you using a standard Windows theme?
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
Hello, I'm a beginner user of InDesign, using CS5, and am needing some help with tables.
I'm creating a schedule for an event. I have a 4 page, facing-pages, each page is letter-sized with vertical orientation. I'm inputting the schedule data into a table because that seems to be the easiest way to keep everything aligned and easy to re-organize. My table begins in the lower-half of Page 1, and runs to the bottom of Page 3.
My questions:
1) On Page 2 and 3, if I adjust the column width the width is automatically updated on the facing page (e.g. width change on Page 3 auto-updates Page 2). However on Page 1 the width remains the same. Anyway to have it update as well? The text in the tables is linked (e.g. can push text from Page 1 to Page 2)
2) On each Page I merged the first row of cells to create a 'Date' header (e.g. March 4 2011). As changes are made to the schedule (e.g. events added or removed), and because the text between the 3 pages/tables linked together, sometimes the Date header from Page 3 appears on Page 2, so I then have to repeatedly shorten the height of the Page 2 table so that the Page 3 Date header is 'pushed' to Page 3 properly. Anyway to force a certain row to appear on Page 3? I guess I could create a stand-alone table for Page 3, but then if I adjust column width, it won't be automatically changed on Page 2 anymore.
Thanks!Hello, I'm a beginner user of InDesign, using CS5, and am needing some help with tables.
I'm creating a schedule for an event. I have a 4 page, facing-pages, each page is letter-sized with vertical orientation. I'm inputting the schedule data into a table because that seems to be the easiest way to keep everything aligned and easy to re-organize. My table begins in the lower-half of Page 1, and runs to the bottom of Page 3.
My questions:
1) On Page 2 and 3, if I adjust the column width the width is automatically updated on the facing page (e.g. width change on Page 3 auto-updates Page 2). However on Page 1 the width remains the same. Anyway to have it update as well? The text in the tables is linked (e.g. can push text from Page 1 to Page 2)
2) On each Page I merged the first row of cells to create a 'Date' header (e.g. March 4 2011). As changes are made to the schedule (e.g. events added or removed), and because the text between the 3 pages/tables linked together, sometimes the Date header from Page 3 appears on Page 2, so I then have to repeatedly shorten the height of the Page 2 table so that the Page 3 Date header is 'pushed' to Page 3 properly. Anyway to force a certain row to appear on Page 3? I guess I could create a stand-alone table for Page 3, but then if I adjust column width, it won't be automatically changed on Page 2 anymore.
Thanks! -
Create and Save a Photo Colllage from Light Table
Hi Everyone,
I want to create a montage of several photos that I can save as one .JPG or similar, then take and have printed as a large photo collage.
I have had limited success using Apertures Light Table feature, however cannot find a way to save the entire light table as a single image for printing.
Can anyone offer any advise on this, or perhaps suggest a different application that will do the job?
Best Regards
DarrynIf a PDF format works for you, then you can simply choose the light table, select FILE->PRINT LIGHT TABLE and in the window that pops up you can select SAVE AS PDF.
Then you can print that file...
Cheers, -
Book, Web Gallery and Light Table Not Working
When I try to create a new book or open an old one the design window does not open. Cannot get to the light table and other features as well.
Where did they all go?This sounds odd. Did you try quitting and relaunching? You might delete the .plist in the Preferences and rebuild the database (Option>CMD on launch).
-
Help needed with singleSelection and multiple selection in table.
Hi ,
How do i implement the singleSelection and multipleSelection on table rows.
How do i capture the checked rows?
How should the code be written and where should it be written.
I should be capturing the values of the checked rows and pass it to the pl/sql package.
I have a table - in -table so there is a singleselection on the outer table and multiple selection on the Inner table.
Could anyone help me with this.
Thanks,One solution to most of your questions : Read the advanced table section of Dev guide.
Always go through the dev guide before putting up the issue. Let the forum be for those scenarios which dev guide doesn't covers in much detail.
--Shiv -
Ratings and adjustments staying on the Light Table
I'm working through the Luna and Long Apple Pro Training book. It's excellent. I've got a problem which no amount of re-reading seems to address. I know I've done something wrong, but I can't find any obvious error.
I've worked on a series of images on the Light Table and have adjusted them and rated them there. Following the book's direction, I tried to collect the best rated versions using a Smart Album. No luck--it showed nothing was rated. I was surprised to find that neither the ratings nor the adjustments showed on versions anywhere except on the Light Table itself. In other words, when I selected the Project icon, the image versions in the browser and viewer were unadjusted and unrated. Since this seems to defeat the purpose of the Light Table, I know I've done something wrong along the way.
I'm quite sure I'm not the only person to which this has happened. Anyone have any ideas where I goofed?
Thanks.How are they being viewed at the trade shows? A digital projector connected to a computer playing the slideshow with iPhoto? An external monitor?
OT -
Question on Light Table behavior
I am wondering if it just me and a couple of others who are seeing pixelated images in a Light Table in 3.1.1?
Situation:
With Aperture 3.1.1 set to all defaults in Preferences, I create a new light table (either empty or with pre-selected images) and then drag images to the light table.
The images are small on the table. They appear to be lower quality than the images in the filmstrip to begin with. Resizing the images exagerates the problem and reveals unclear and/or pixelation.
I have done a clean install of Aperture 3 and updated to 3.0.3 and the issue does not exist. Light Table images are fine whether resized or not.
*What I have tried so far:*
1 - Clean install of OS X 10.6 and updated with 10.6.6 combo installer (repaired disk permissions once installed), then install Aperture 3 and updated to 3.1.1 (repaired disk permissions once completed). Import new images from Nikon D80 (both RAW and JPEG) and tested light table. Same issue. Then imported new .cr2 files from a friend's Canon, which all had the same issue.
2 - Copy APTS lesson files and library to drive > open with Aperture 3.1.1 (upgrade library when prompted). The existing images in that library behave correctly in Light Table, but newly imported images into that library display the image degradation / pixelation in light table.
3 - In all cases, I have tried to delete / generate Previews as well as Thumbnails. None of these have sorted the issue.
Note - it almost appears to me that the images used on the light table are actually small thumbnails that are low quality on the light table and any subsequent resizing pixelates the image.
Note #2 - the strange thing in all cases is that using the loupe tool and panning over the images in the light table shows high-quality image.
I am trying to determine if it is my machine (or procedure) specifically, or if there are others experiencing this in large numbers.
I have 8 GB RAM and the nVidia 8800 GT upgrade card in my machine. Whether just Aperture 3.1.1 is installed or with all my normal software, no difference in Light Table behavior.
Looking for comments as to whether users have no issues like this or any who do.
I have already sent a report to Apple.
Thanks in advance for any comments.
CorkySP,
I do not think this is intended behavior, as it works as expected in AP 3.0.3.
I sent a bug report via the feedback function in the Aperture menu and will follow up with a second one. I was hoping that other users would chime in as to whether they were experiencing the issue, or if it is working correctly on their system. Unfortunately, there has been no response other than yours as you can see.
There are two other threads since the release of 3.1.1 where 3 or 4 other users are having the same issue (at least as far as the pixelation / low resolution image issue).
On my system, the default size of the light table changed between 3.0.3 and 3.1.
In 3.0.3 the light table starts off smaller (with larger grid squares as if zoomed in) and dragging the images onto the table show the same quality image on the table as in the filmstrip. In 3.1 (and 3.1.1) the light table starts off much larger (with smaller grid squares as if zoomed out) and dragging an image from the filmstrip results in a smaller sized thumbnail showing on the light table at the lower quality.
I have also been going back through the 'Apple Pro Training Series - Aperture 3' book using the included library and lesson files (to test for functionlity with AP 3.1.1 and iPhoto '11) and I find that in lesson 3 where the light table is used, the same issue appears once you resize one of the images next to smaller images (which results in the three smaller images being lower quality than the resized image).
My guess is that the thumbnail / preview function connected with the light table sizing is creating an issue where the light table is using a smaller thumbnail when it should be switching to (or using from the beginning) a preview for quality. The fact that the image viewed under the loupe tool is high quality lends to this theory - IMHO.
I am hoping that this is fixed in 3.1.2 (if they release an update), since I would like to use the light table for layout decisions and for comparing multiple images. The bad image quality sort of shoots this function in the foot for me.
The only real fix is to revert to AP 3.0.3 and forego the 3.1.1 improvements which really isn't a fix.
To any others reading this post, could you please indicate whether the light table image quality is fine for you or whether you are experiencing the bad quality / pixelation issue I am? It would help me in discovering whether this is machine (hardware) specific or a wider issue.
Thanks in advance for any help.
Maybe you are looking for
-
Itunes error: network connection timed out
Every time I try and log into my Itunes account I get an error message saying We could not complete your Itunes Store request. The network connection has timed out. How can I fix it? Edit: My virus scanner is Avg and I use ad-aware 2007 for spyware.
-
Im not sure if im correct or not but i currently have 1 30in display and looking to get another - i have the GeForce 6800 Ultra card and was wondering if i can or cannot run another 30in on this? also im really really looking at the quad and im not f
-
Hi All, I created a table in design time and getting all records populated into Table by binding them. Now I want to add custom coloum with buttons based on some conditions.(which are already displayed in table.) Please suggest me how to do this.
-
Want to see constant value of CPU not the aggregated one from the cube?
Hi All, When I see my layout with fiscyear ,it shows the aggregated values for Quantity,Cost Per Unit,0Amount,which is distributed across period. For example if one WBS and one uear(2008) -0Quantity(12),CPU(100) to four periods of one fiscyear.The di
-
How do they choose which ebook to put on the featured list
My book is up on iTunes. It is very high quality. Howl do they choose which ones to have on the Featured list as opposed to merely the release date category. Also... What about DRM.? What's the difference and does this accept their decision?