Lightroom 2.2 says my PC is out of memory?!?

Sometimes LR will display this message: " Your disk "Lokal disk (C:), which contains your Lightroom catalog, is critically low on space. Lightroom has saved the contents of your catalog. You must now remove files or empty the trash to make at least 20 MB available or quit Lightroom."
Yet, when checking My Computer/Lokal disk (C:), it says that I have 217 GB at my disposal, of a total of 465.
Even stranger (at least to look at), is that sometimes when I use the compare function (C), the two frames will appear in grey, and with the words "Out of Memory - Ade:" written in red, upside down and mirror wise at the bottom of each empty frame.
Anyone here have a clue what is going on?
Thanks in advance,
Ole K

My PC was reinstalled from scratch a month ago.
Drive C has a lot of space, maybe 70% free of a 75Gb partition
and all LR files, OTOH, are placed on a 2 TB raid-10 with about
1.5TB of free space.
BTW, the same issue is present in a test Win7 installation I've
made on the same hardware. With some other minor flaws that are
(maybe) related to (beta) graphic card drivers.
AMD Phenom II, 4 Gb Ram, ATI Radeon 4870, all up-to-date.
Bye

Similar Messages

I update my ipad regularly, but now it will not finish the syncing as it says i have run out of memory but i have 14gs left??

i update my ipad regularly, but now it says it will not finish as there is no more memory left. But i still have 14gb spare on it?

The memory you exhausted may not be on your iPad. It might be in iTunes (your computer) or iCloud.

Import Error out of Memory

I can't open a powerpoint document that I just edited on Keynot a few days ago. Now when I try, it loads for a few minutes, then gives an Import Error message, saying that it's "Out of Memory". HELP!!!

this error is usually because the file is corrupted
use the original file from Keynote

Running Out of Memory Since Yosemite

Let me start by saying I was originally part of the Yosemite Beta and was running into the same issue.
After running my system for >20-25 minutes a menu pops up and says I've run out of memory and it has paused my programs. Looking at my Activity Monitor, it says my Mail is running at 64+ GB of memory. When I restart my system, Mail ranges from 64 MB - 120 MB, then it some how creeps up to 64 GB and crashes.
When the final release of Yosemite was released I did a complete clean install, thinking that maybe that was the issue. Tonight I received the same error. After searching online I didn't really find anything of help. I'm hoping someone in this community can help.
Thanks.
My System:
rMBP- 2.6 GHz i7 - 16 GB ram - 1TB SSD

I'm having the exact same issue, on both a 2013 MacBook Air, and on a 2009 iMac. I've used activity monitor, and can observe the mail app increasing in memory usage from 200mb during normal conditions to a sudden rise to 60+GB. Same activity monitor screens as in this post. If I force quite the mail app, everything returns to normal, but this happens at least once every hour. So my assumption is that 1) yes it is the mail.app, 2) it's happening to quite a few people, 3) it's happening on a range of recent as well as older machines, 4) it was introduced with Yosemite, 5) it's not a "plugin" as someone suggested in other posts, 6) no help from clearing cache, clean installs, deleting preferences or container folders in the library.
I would lIke to think Apple will address this issue, but find it alarming that someone in this thread has raised 12 tickets about it in beta without receiving a response. For those of us affected, we might be in for a long wait.
Apple, please help!

Adobe Illustrator "out of memory" when saving then crashes

We have a user who uses Illustrator. Every once and a while she will have the issue where it says that it is out of Memory (RAM). I checked and at that time she had over 4Gb of physical memory left and the Swap was at 0 of 8.6Gb. Am I reading the memory wrong or is something else the issue? Also the CPU was at 5% used and the hard drive has almost 600Gb free. She is using a USB 3.0 external hdd to open and save to. When it crashes the below error is given.

It doesn't happen every time and it is different files. I can't get the user to only keep stuff on the computer. Do you think that is the issue? It used to work fine for months then now it just started doing this on a pretty regular basis, but I can't find anything that I can do to make it repeatable.

Processor out of memory restart phone to reset

When I use the camera or scanner app the phone will revert back to the home screen and a message appears that says the processor is out of memory, restart phone to reset? Can the processor memory be cleared by restarting and if so, how is the phone 'restarted'?

http://support.apple.com/kb/HT1430?viewlocale=en_US&locale=en_US
how to restart

"General Error" and "Out of Memory" for only certain files?

I have Final Cut Express 4 on Mac OS X Leopard and it has been working fine, up until now.
For some reason, when I try to view two clips in the tab to the left of the screen to find sections of them to put into my project, I get a message that says, "General Error" and when I click okay it says, "Error: Out of Memory". They are both mp4 files, and are 242.9 MB and 294.2 MB, and I have viewed them both on Quicktime. I don't understand why it is saying that it is out of memory when I still have 7 GB left on my computer and it still lets me view and add other files into my sequence.
Can someone help me out and tell me how to fix this? I'd really appreciate advise!

MPEG-4 is not a format that works in FCE. You'll have to convert it to one of FCE's format. Without knowing details about what the original format is it's impossible to say what you should convert it to.

Error: Out of memory at line: 693

One of my users is receiving this when trying to run a report through Infoview. We are using Crystal Reports Server 2008. Is this a server error or more like an error because of the user's own computer configuration?
The prompt says "Message From WebPage: Out of memory at line: 693"
Thanks in advance for any advice.

Does this happen with all the reports or any specific report?
If this user logs on to other computer and gets the same message then there is issue with user profile.
If user gets this issue only on his machine and other users gets the same issue on his pc then check browser setting and updates on his machine.
Bashir Awan

Your System is Out of Memory - Citrix platform & Primavera P6 ver. 7.0 SP1

We are having this issue with multiple project files with over 65000 activities, and when we try to calculate (F9) all of them together, we receive a message which says:
"Your system is out of memory, Please close other running applications and try this operation again".
This happens in the middle of calculation. First we want to make sure that our files are not corrupted due to this message.
We tried a workaround and reduced the number of activities in a single project file by breaking it down to more project files, and oppened all of them together to do do calculation, but still we have the same error message.
Our P6 database is Oracle and we connect remotely via Citrix 12.0.0.6410.
Thanks in advance for your help.

Each of our Citrix machines (we have 4 at the moment), have 4GB RAM allocated per user (64GB total for 15 users per server).
I should add that we had the same problem with P6 V7 prior to SP1. Also, the problem is not Database specific, schmaster's is Oracle, ours is MSSQL.
It really shouldn't cause a problem and would appear to be Citrix or Network dependant as I run P6 V7 SP1 on a standalone machine as well, and with exactly the same programmes (although with only 2GB RAM), it runs perfectly.
Also, through Citrix, it reports a much higher memory usage figure. After loading my 37 Programmes, it reports that it has used close to 3GB (very close to the theoretical limit for a 32 bit app) of the Physical RAM and 2GB of Virtual. On the standalone machine it is about half this.

Lightroom 5 permanently runs out of memory

Lightroom 5 on Windows 7 32 Bit and 8 Gigabytes of memory (more than the 32 Bit system can use) permanently runs out of memory when doing some more complex edits on a RAW file, especially when exporting to 16 Bit TIFF. The RAW files were created by cameras with 10 up to 16 megapixel sensors with bit depths between 12 and 14.
After exporting one or two images to 16 Bit uncompressed TIFF an error message "Not enough memory" will be displayed and only a Lightroom restart solves that - for the next one to two exports. If an image has much brush stroke edits, every additional stroke takes more and more time to see the result until the image disappears followed by the same "Not enough memory" error message.
A tab character in the XMP sidecar file is *not* the reason (ensured that), as mentioned in a post. It seems that Lightroom in general does not allocate enough memory and frees too less/late allocated.
Please fix that bug, it's not productive permanently quit and restart Lightroom when editing/exporting a few RAW files. Versions prior to Lightroom 4 did not have that bug.
P.S. Posting here, because it was not possible to post it at http://feedback.photoshop.com/photoshop_family/topics/new It's very bad design, to let a user take much time to write and then say: "Log in", but a log in with the Adobe ID and password does not work (creating accounts on Facebook etc. is not an acceptable option, Adobe ID should be enough). Also a bugtracker such as Bugzilla would be a much better tool for improving a software and finding relevant issues to avoid duplicate postings.

First of all: I personally agree with your comments regarding the feedback webpage. But that is out of our hands since this is a user-to-user forum, and there is nothing we users can do about it.
Regarding your RAM: You are running Win7 32-bit, so 4 GB of your 8 GB of RAM sit idle since the system cannot use it. And, frankly, 4 GB is very scant for running Lr, considering that the system uses 1 GB of that. So there's only 3 GB for Lr - and that only if you are not running any other programs at the same time.
Since you have a 8 GB system already, why don't you go for Win7 64-bit. Then you can also install Lr 64-bit and that - together with 8 GB of RAM - will bring a great boost in Lr performance.
Adobe recommends to run Lr in the 64-bit version. For more on their suggestion on improving Lr performance see here:
http://helpx.adobe.com/lightroom/kb/performance-hints.html?sdid=KBQWU
for more: http://forums.adobe.com/thread/1110408?tstart=0

Out of memory error back in lightroom 1.3

My wife likes to print lots of pictures on one page, like 8 to 16 typically.
lately while printing instead of printing pictures, random frames wil be grey and read out of memory. the monitor displays the photo however. looking at the print jobs the pages with problems typically are very small like several hundred K instead of megs. Im running vista on a athlon64 x2 4400+ to an epson pm4000px (japanese version of the 2200 or 2100) on 2 gigs of ram.
other times I get an error that says job failed to spool.
restarting lightroom temporarily fixes stuff.
please help.
Deacon MacMillan

Can you specify:
Which ID version do you use?
Which OS do you run?
Which computer model?
How much RAM do you have?
How much disk space is left?
What is the size of the document?
What is the size of the linked content? Or did you have it embedded?

HT4059 When I try to load an ePub book it says out of memory. How many books can you read at one time?

When I try to load a second book it says out of memory. How many books can be read at one time?

Thank you so much...
1. I don't have that fat format I checked as I saw this on another answer...BUT...you are right the project was very bloated and I made a new project with the sequence and moved a bunch of projects off to an outside drive and things are flying again...this effect "twirl" was on three clips and this seemed to be creating a problem along with it being a bloated project. Don't know why this effect renders easily then the next second doesn't it's on three clips on the entire project and one or another might not render all of a sudden.
2. I understand what you said about the timeline export...I decided to export the sequence without the matte it was nested in and that sequence did have the chapter markers on the timeline and they again didn't export??? I'll look tomorrow at this it makes no sense if what you're saying is how to do it...the final cut pro book said they should have showed up if I export from the browser and that didn't work either.
3. I then matted that output and rendered it to output but I am worried this will degrade and compress the sequence more than I want by outputting the same sequence with current settings twice???...the couple of outputs I could make nested looked very good as this was one render...however, I tried doing a quicktime "current settings" with the dvd studio pro info still trying to export chapter markers and maybe it's my imagination but the output didn't look as sharp as just an output with just chapter markers???
r. I did look at the final cut pro book and it says that mpeg 2 movies will not read chapter markers anyway if you create one in compressor...if this is true it makes no difference if the quicktime output isn't having chapter markers show up. I assume when I go to author though I can put an mpeg 2 movie into dvd studio pro and create chapter markers at that point!! It seems weird it says it can do it with an mpeg 1 but not an mpeg 2 when everyone is using that for dvds.

Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??

Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??
Thank you. Nick

Okay, we'll try the technique from the following post. Be sure to be logged in to your usual user account when doing so. (Otherwise you'll be editing the wrong set of HKEY_CURRENT_USER keys.)
Re: How do I turn off the compatibility mode for ITunes.
Does that clear up the compatibility message?

HT201363 whenever i want to download an app, they ask me for 3 security questions. I answer them and then it says "session has timed out". And then the whole process repeats itself. How can I download a free app if this keeps coming up?

Whenever I want to download a free app, it asks me for 3 security questions. I answer them. Then it says "session has timed out". Then the whole process starts over. How can I get around this?

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

When trying to create connection using Contribute 6.5, get error message "Unknown error. Please see the log for detail." The log says "Network connection timed out." What do I do now?

Have been using Contribute 6.5, and earlier versions, for years with Hostway without any problems. All of a sudden I cannot create a connection to our website. Tried to chat with Adobe a twice now and got no help. Yesterday they started a chat with me, then ended the session without any communication! My problem has been going on for several weeks now. I uninstalled Contribute, downloaded and installed again, but it did not help. Hostway had me connect with Zilla and everything worked fine. So, they say the problem is with Adobe. The last attempt ended with "Unknown error. Please see the log for detail." The log says "Network operation timed out." Does anyone have any suggestions?

Hi There,
Can you please try using any other Internet connection outside your company's network and see if it is working? Alternatively, Can you please try the below settings from the Advanced... Menu while creating the connection using FTP details and try to create the connection again:
Regards,
Mayank

Lightroom 2.2 says my PC is out of memory?!?

Similar Messages

Maybe you are looking for