Lightroom 5 - Lens correction / correction objectif - Sony Alpha A7 SEL2870

Hello everybody.
I download lightroom 5 (trial version). I shoot in Raw with my Sony Alpha A7 with the basic lens 28-70 (SEL2870). I didn't found the correction for my lens. The version is (I think) update. How can I do?
Thanks
Hello tout le monde.
J'ai téléchargé Lightroom 5 (version d'évaluation). Je prend mes photos (format RAW) avec mon Sony Alpha A7 avec l'objectif en kit 28-70 (SEL2870). Dans l'outil développement, je ne trouve pas la correction d'objectif pour le mien. J'ai mis à jour Lightroom mais toujours rien. Quelqu'un peut m'aider?
Merci.

Download and install LR 5.3 non-CC from here:
http://www.adobe.com/downloads/updates

Similar Messages

Lens Profiles for Sony Alpha DSLR's? Share Yours!

Hey everyone out there, I wanted to make a thread were we could share lens profiles for the Sony Alpha DSLR system. I currently use the A-700 and the A-900 for all of my "Pro" work. I welcome this new tool with open arms as distortion is sometimes a huge issue when using some wide angle lenses.
I personally use the following lenses on a daily basis and will be making profiles for these lenses sometime today!
Tamron 70-200mm f2.8
Tamron 17-50mm f2.8 (lots of distortion on the wide end)
Sony 50mm f1.4
Sony 70-300G
Sigma 50mm f2.8 Macro
Minolta 28mm f2.8
So lets see if we can get the most popular lenses for the Alpha mount profiled and ready to go to share with everyone and help make the Sony shooting experience a whole lot better!

function(){return A.apply(null,[this].concat($A(arguments)))}
Gaspyy wrote:
Yes, I actually believe the difference is minimal. The optical distortions & vignette would be the same. Obviously when creating the profile, it would help to use the higher-res camera, as it would allow better recognition of a finer grid chart, but the light would fall on the sensor in the same way for both cameras.
I'm not looking to argue with anyone. I know things tend to get heated sometimes here and I don't have any desire for that.
Let's say we have different opinions.
Nothing wrong with that so long we behave in in civil way.
The size of the microlenses on top of the photo cells also differ from earlier CMOS sensors.
That can influence the CA.
Color fringes, particularly noticeable at the edges of high-contrast photos, are is principally caused by lateral chromatic aberrations, where the lens — like a prism — splits the visible light into its different color components. DxO Optics Pro analyzes each image and automatically detects and corrects these fringes or irisations, thanks to its precise characterization of the fault based on the specific lens-camera combination that you use.
http://www.dxo.com/intl/photo/dxo_optics_pro/optics_geometry_corrections#ColorFringing
Regards

Lenscorrection profiles for Sony Alpha lenses

Are there coming correction profiles for Sony Alpha lenses, like the SAL1650. Why are there only profiles fot E mount?

Limited Resources and Lack of Manufacturers Data are often cited as the two most common reasons.
1. You need time to do it.
2. You need a lens or better-the data from the lens manufacturer or both.
And, as always, you can create your own profile and share it with others via the Lens Profile Creation tool and Downloader.

Sony FE 28-70mm in camera + Lightroom lens correction = double correction or overcorrection?

Hello,
I have a Sony A7 with Sony FE 28-70mm kit lens. On the Sony A7, if i select "Shading Compensation" in the camera menu, the camera corrects vignetting in the saved raw file. I have experimented by taking two raw photos, with in camera Shading Compensation turned on and off. I then imported the photos into Lightroom. I then tried turning lens compensation (vignetting) on and off in Lightroom. This confuses me. In the first image (In camera ON and Lightroom correction ON) it looks like vignetting is completely gone. With in camera ON and Lightroom lens correction OFF, there is still clearly remaining vignetting. With in camera OFF and Lightroom ON there is also clearly remaining vignetting
Can someone tell me what the recommended course of action is? Is the Sony in-camera lens correction worse or better than Lightroom? Neither the in-camera nor Lightroom's correction will correct vignetting completely on their own. Does that mean that the Lightroom correction is supposed to be used in tandem with the in camera correction to achieve full vignetting correction? There is lacking information/documentation of this feature, I have looked at both Sony A7 help guide and Adobes documentation about lens correction without finding any info about this situation.
Thank you.

"Shading Compensation" is probably saved as metadata tag in the raw file but the raw file data is not corrected. This metadata is probably used in the included Sony software to automatically correct the raw for "Shading Compensation" but Lightroom probably does NOT use this data. You will hopefully get a reply from a Sony user.

After upgrade to lightroom 4.3, my canon 7D is not showing up in lens profile correction

I think this happened after upgrading to lightroom 4.2, but I am not sure as I haven't used Lens profile correction in some time.
When I enable the "Enable profile corrections" checkbox in "lens corrections" The Make and model of the lens is recognized, but the profile field has only 2 optoins, "canon EOS 1D MK III" and "Adobe". It does not have any other options including the EOS 7D that I use. Tried uninstalling and installing again, that didn't help.
I found in the forum that for Win 7, lens profile is supposed to be stored in "C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0", in my case the LensProfiles directory does not exist. There is a CameraProfiles directory(C:\ProgramData\Adobe\CameraRaw\CameraProfiles).
How do I solve this?

There is nothing wrong with your lens profiles.
The issue is that you are adjusting a JPG not a raw file. When adjusting raw files the camera model is not listed with the profile because it doesn’t matter and all of them say Adobe as their source for Canon cameras at least, but when adjusting JPGs the camera may have done certain adjustments internally so it does matter and is why you see the wrong lens-distortion occurring when choosing the 5D Mark III profile with your 7D JPGs.
For the record, I have profiles in both the locations mentioned: under Program Files\...\CameraRaw and under ProgramData\...\Lightroom 4.x. This makes sense because I have both Photoshop CS6 and Lightroom installed. The ones under Lightroom are all dated 12/2012 while the ones under Camera Raw are mostly dated 2/2012 with some from 11/2012 and other dates. The profiles are probably the same, but the Camera Raw ones retain the date of the original profile creation whereas the Lightroom ones all get updated to the same date. Lens profiles can also be installed with the DNG Converter, although I'm not sure which of the two locations those install to.

Digital Camera RAW Update 5.02 breaks Sony RX100 lens distortion correction (AGAIN!)

Just like with the Digital Camera RAW Update 4.08, the latest 5.02 update breaks the Sony RX100 lens distortion correction again. I'm reverted back to 5.01 until this is fixed.
From your Time Machine backup, restore the previous versions of
/System/Library/CoreServices/RawCamera.bundle
/System/Library/CoreServices/RawCameraSupport.bundle

Yes, I noticed it too, but I wasn't certain it was 5.02 that did it as I sold my RX100 and haven't processes any files for a while. Then as part of the NR discussion here I looked at some old RX100 files, and the distortion correction now disappears. Unfortunately I can't really revert to 5.01 because I was waiting on the A7 support 5.02 brought.
Apple are aware of it, so hopefully the fix will be quick to arrive.
Andy

Lens profile corrections in Lightroom 3.6

I use Lightroom 3.6. The "lens profile corrections" does not have my lens in the drop-down menu. Is there a way other than using the Adobe Lens Profile Creator Tool to create this profile? The lens is the Nikon AF-S DX NIkkor 18-105mm F3.5-5.6 G ED VR, and I use the Nikon D90 dslr. I only shoot JPEGs.

You can check to see if someone else has already created one by searching with the Adobe Lens Profile Downloader.

My Lightroom lens corrections need correcting. Is this normal?

I have bought myself my 1st DSLR camera (Nikon D3100) as i now want to shoot Raw instead of Jpeg. I've always shot Jpegs in the past with my old cameras. The in-camera Jpegs from my new Nikon don't show any lens distortion. However, when i open the Raw (NEF) files in Lightroom and tick 'enable profile correction' in the Lens corrections section, the distortion correction seems too much and i have to manually adjust it every time.
The lens profile comes from Lightroom itself (not from other users), & so this doesn't seem quite right to me that the correction is somewhat wrong each time.
I'm wondering if i'm doing something wrong or that maybe its even normal to have to adjust the correction further yourself each time (and perhaps most users have to do that too)?
I've included 3 Jpegs of the same image to demonstrate the problem (detailed below):
1) The export from Lightroom with the lens distortion corrected by Lightroom (note the straight red line).
2) An exported Jpeg version of the uncorrected Nef from Lightroom (to show the full original lens distortion)
3) The original in-camera Jpeg (obviously the distortion corrected by the camera)
I've drawn straight red lines on to the images to demonstrate the differences.
Any ideas?
^ above image is a Lightroom exported Jpeg (from NEF) with lens correction ON (note the red line along the top of the roof)
^ above image is a Lightroom exported Jpeg (from NEF) with NO lens correction yet, thus showing original distortion.
^ above image is the ORIGINAL in-camera JPEG showing no distortion at all (note the red line along the top of the roof).
P.s i've taken different shots too and the problem is the same for them all (at least at 18mm anyway).
Additional information:
The Nikon D3100 has an APS-C sensor (I'm not sure if that's significant or not). Also the lens described in the profile correction matches the one from my camera.

Rob Cole wrote:
Hi Paul,
I'm really not sure exactly what DxO outputs when you choose DNG:
It's not raw data, yet preserves some ability to do raw things in Lightroom, like white balance and camera profiles.
I dunno about pulling from highlight/shadow "reserves", but note: it's different than a DNG-wrapped tif or jpeg, it may be able to pull from the highlight/shadow reserves as can be done via the DNG used for smart previews - I just don't know.
trshaner: do you know for sure that a DxO DNG hard-clips shadows/highlights, or are you just "extrapolating/assuming/educatedly-guessing"?
Regardless, DxO has some auto shadow/highlight recovery (for those extreme black/white tones) that is quite good - don't sell it short.
Google 'dxo linear dng highlights.' Here's one that supports what I said:
http://forums.adobe.com/thread/663428
I've tried using Canon's DPP for the same purpose with TIFF output AND with DPP's highlight recovery. I can't get the same highlight recovery with the TIFF as compared to the raw inside LR with PV2012.
Rob Cole wrote:
I still think about it when Lr's lens corrections are wonky. But my problem with Lr's lens corrections have more to do with vignetting than distortion (because I mostly shoot nature, not buildings...), and I can add manual correction and/or a dab of paint to the automatic corrections, which saves me the complication of front-ending via DxO. If distortion is your primary concern, consider balancing auto with manual distortion corrections (I've not done much of that, so no guarantee...). Also, there's the upright feature in Lr5...
What's wrong with simply changing the Lens Profile 'Amount' settings from 100 if a specific lens profiles is "over-correcting" or "under-correcting? Don't forget most zoom lenses have a "complex" moustache shaped distortion, which is NOT easily corrected with LR's Manual Distortion control. You can certainly try both, but there's no way to save the Manual Distortion "correction" setting to a specific lens profile's defaults.
Rob Cole wrote:
PPS - DxO's purple fringe tool will get the fringe out without the artifacts of Lr's global defringer, however it may also take away real image color sometimes, and can't be done locally, so one may ultimately get better results in Lr if willing to spend a while painting local defringing.
I've never seen any artifacts caused by the LR Defringe tools (see image posted of Canon 8-15mm Fisheye lens CA), but you do need to be very careful concerning the actually settings used. After using the eyedropper tool to sample a fringe area I fine tune the settings to eliminate desaturation of areas that have similar color as the fringe area. Once you have the correct settings save it to a Develop preset for manual application. For example with my Canon 8-15mm F4L Fisheye zoom I have two (2) Develop presets of 8-12mm (Purple 2, 30/55) and 13-15mm (Purple 4, 30/55). There is no need to use Local controls with Defringe if you follow my suggestions for manually tuning the settings to prevent desaturation in like colored areas. IMHO the LR CA and Defringe tools are darn near perfect when you use them correctly!

Lens chromatic correction from Lightroom 5.7 to Photoshop CS5

When I open a raw file (NEF) from Lightroom 5.7 to Photoshop CS5 all modifications done in Lightroom are taken into account by CS5 except lens chromatic correction. Does someone know how to proceed to get lens chromatic correction taken into account too?

That's great, but what exactly did it - matrix (gamma) profiles instead of LUT? It would be good to know for future reference.
I have seen small problems with LUT profiles in Firefox, like black clipping up to value 6 or 7, but Lightroom seems to behave well with LUT profiles here. The problem with LUT profiles is that they are "heavier" and more complex, because they contain complete tables for all possible transformations - whereas matrix profiles do it by much simpler mathematical formulae. LUT is more accurate, but matrix simpler and more reliable.
Not that I think accuracy is a problem with Eizo CGs. Which is why it's a bit puzzling that ColorNavigator has LUT as default. I use mostly matrix targets these days, my feeling is that the simpler the profile, the better.

Lens profile corrections unresponsive

I need a hand in troubleshooting the following:
The last time I accessed my catalog I was able to use the automatic lens profile corrections feature of Lightroom. Now, I am unable, and get the error message stating that Lightroom is unable to locate a matching profile automatically.
I'm using supported equipment (Nikon 24-70 / 70-200) and the lens shows up in the EXIF data as viewed in Lightroom.
At first I thought this was a result of first using Photomechanic to caption my images but when I attemped to import into lightroom directly from the card, the same thing happend.
Any ideas?

Profiles are not presets, they are stored somewhere in a shared system directory. Camera Raw shares the same location for profiles, that's why uninstalling CS5 removed the profiles.
Reinstall Lightroom.

Lightroom 5.5 identification of Sony A7 FE 28-70 mm lens with JPG

Learning my new A7 camera with the FE 28-70 mm lens . Shot a number of pictures with Quality = Fine (Jpg). When imported into LR 5.5, in the Develop Module, and I select Enable Profile Correction and select Sony, the only option I am given for the camera lens is the Sony DT 18-200mm (which I don't have, never used). In the Library Module, the make, model and lens shows up correct. And, to make things more confusing, if I click on the lens model in the develop module it shows that I have 900+ images taken with the 28-70 lens (and shows the thumbnails). So, the metadata seems to be in LR but I stuck on getting the Develop Module to allow for lens correction. Seems like the FE 28-70 lens was supported as of LR 5.3.
When I shoot raw, the lens data shows up correctly in both the Develop and Library Modules.
Any ideas?
Thanks

Lens profiles are created specifically and separately for JPEG images and raw images. Generally speaking, there are more profiles for raw files. And apparently that is the case with your particular lens. Adobe provides a free lens profile downloader and lens profile creator. You can check to see if someone else has created a JPEG profile for that lens, or you can create one of your own.
Adobe - Adobe Lens Profile Downloader : For Windows
Adobe - Adobe Lens Profile Downloader : For Macintosh
Adobe - Adobe Lens Profile Creator : For Windows
Adobe - Adobe Lens Profile Creator : For Macintosh

Lens Profile Correction - Pentax SMC DA 18-270

Does anyone know where to get the plug-in to use the auto lens profile correction in Lightroom for the above stated lens? Adobe only have the older 18-250, and even on the new 5.3 LR version, still have not supplied the plug-in for this lens!

LR doesn’t use plug-ins for lens support. The support is either built into the program or contained in external .lcp files that each new version update adds a few of.
Looking at the new lenses supported for the ACR 8.4 release candidate at Adobe Labs, which would presumably be added to LR 5.4, I don’t see the lens mentioned as newly added:
http://labs.adobe.com/technologies/cameraraw8-4/?tabID=details#tabTop
Looking in the Adobe Lens Profile Downloader, for lenses that third-parties (users like you and I) have supplied, I don’t see any 18-270 listed, either.
What camera are you using the lens on?

Lens Distortion correction not working on tonemapped jpg files

I have a series of photos exported from Lightroom 2 that I HDR tonemapped in Photomatix. Unfortunately after a disk failure I do not have the original RAW files and only have the 100% jpg saved tonemapped files from photomatix.
Now that Lightroom 3 is out I wanted to try some lens distortion correction on them. I imported them and immediately noticed after enabling the lens profile corrections and choosing my lens that although chromatic arberration and vignetting works there is no effect at all with the distortion correction! Even when I slide the slider from one side to the other absolutely nothing changes.
I tried it on other raw files and it works fines. I tried it on jpgs that I have that have not been combined and tonemapped in photomatix and they work fine. It is only the jpgs created from photomatix.
Is there something about the exif data that I am not considering or any other explanation as to why the photomatix jpgs won't take any distortion correction? thanks

If it's working for other jpg's, (and I though it didn't work on jpgs, so who knows?) then it does sound like the photomatrix program is wiping out the exif information that is needed.
Did you try using a viewer to look at the exif info, both before and after, to compare? Maybe there is a setting (in photomatrix) that you are missing when you save data?
Sorry, don't know photomatrix, so just offering generic ideas in the hopes it sheds light..
Cheers!

Adobe Camera Raw Save Settings and Lens Profile Corrections Help

I have been fooling around with Adobe Camera Raw’s (ACR) ability to save settings so that I can apply them to other images. I’m able to set things such as clarity, vibrance, camera profile etc. What I want to do is enable Lens Profile Corrections and have it automatically detect the lens information for future images, apply no distortion corrections and apply vignetting and chromatic aberration corrections. However, when I try this, the Lens profile sticks on “Canon EF 24-105mm f/4 L IS USM” (which is what I used for creating the settings to be saved) regardless of the lens used for the image that I am applying the settings to. Is there a way do this?
I’m using Photoshop CS6 and ACR current version.
Thanks,
Mike

You should see an Adobe Standard profile and perhaps an ACR x.x profile for your camera, but Adobe does not make Camera-centric profiles (landscape, portrait, camera neutral, etc) for most cameras unless they are Canon DSLRs, Nikon DSLRs, one Leica and a few Pentax cameras.
On a Vista/Win7 system you can verify what models of cameras are supported by Adobe by looking for profiles in:
C:\ProgramData\Adobe\CameraRaw\CameraProfiles
The lens profiles are in:
C:\ProgramData\Adobe\CameraRaw\LensProfiles
There are comparable directories on Win XP.

I have Photoshop Lightroom 5 and have downloaded Camera Raw 8.7.1 &DNG converter successfully. I have a new Sony Alpha 7 11 model ILCE-A7M2 that is supported by LR5. I am still not able to see the RAW pictures. The message says preview unavailable for thi

I have Photoshop Lightroom 5 and have downloaded Camera Raw 8.7.1 &DNG converter successfully. I have a new Sony Alpha 7 11 model ILCE-A7M2 that is supported by LR5. I am still not able to see the RAW pictures. The message says preview unavailable for this file DSC-ARW. Whatelse I should be doing to see my pictures? Can someone help?
Anita

The support for that camera was added in the very latest release of Lightroom, version 5.7.1. Having downloaded Camera Raw 8.7.1 will have no effect on Lightroom because Lightroom doesn't use the Camera Raw plug-in. You need to make sure you have updated Lightroom to the very latest release in order to have support for that camera.

Lightroom 5 - Lens correction / correction objectif - Sony Alpha A7 SEL2870

Similar Messages

Maybe you are looking for