Limit prompt by value for an hierarchy prompt.

Hi All,
I have Two Hierarchy column prompts in the dashboard prompt.
My requirement is,
According to the value selected from the first hierarchy , second hierarchy values should be restricted or limited.
Thanks,
Haree.

Hi RG,
Thanks for your response. *'Limit Vaulues By' -> All prompts* is possible for dimension columns.
whether it is applicable for hierarchy column?
My requirement is only for hierarchy column in dashboard prompts.
Thanks,
Haree.

Similar Messages

  • Value  for variable *** hierarchy Version is invalid

    hi ALL
    for one Of the user, when he tries to run the report he is freequently facing this situation. he is getting the error like : "Value  for variable *** hierarchy Version is invalid" . but the same report is working for other users.
    The starange part is . those variables are not mandatory selections, they are userentry optional values.
    we tried with authorization team also . that is not the probelm.
    how can i solve this...
    any ideas?
    Praveen.
    Message was edited

    Praveen,
    Please check if there is any "Personalization of variable" setting for that variable.
    Raju

  • Can we have a Default Value for the dashboard prompt ?

    Hi
    I have a requirement as when we run the dashboard, dashboard prompt should be defaulted with a value for the first time.
    Defaulting the values is done by SQL Results,but when i try to change the values for that prompt it is not showing any other values other than the defaulted prompt.
    Ex: I have a dashboard prompt as Employee Name and i have defaulted the value for that with 'Scott' and ran the dashboard.
    When i try to run it for different employee i am not able to get other values to be selected.
    Do we have any mechanism as such we can have default value when we run the dashboard for the first time and then all the values when we run it for the second time?
    Thanks

    user12846884 wrote:
    Defaulting the values is done by SQL Results,but when i try to change the values for that prompt it is not showing any other values other than the defaulted prompt.
    ThanksYou do something wrong. What is the version of OBIEE? How do you create prompt?

  • How to limit a specific value for an attribute in OIM during AD recon.

    Hello,
    User with same attribute have diffrent values in target system. When trying to reconcile the user i wouod like to rconcile only one value but not all of them. Even though we reconcile all the values for that atribute, we do not want to display them in child form.
    Ex: There is an attrubute in Active directory called "idLevel" having diffrent values like 2, 3, 4, 40 .
    This is multilevel attribute in OIM which displayed in Child form.
    I want to disaplay ONLY idLevel values 40 in OIM child form. Right now when I reconcile this attribute for the user all the values are getting populated.
    PLease let me know if we can achieve this.
    Thanks

    Hate to say it, but I don't think you can without writing your own recon code.
    -Kevin

  • How can we change Prompt  default values based on other prompts....

    Hi Experts,
    I have a prompt Status --> DAILY,WEEKLY and MONTHLY.
    If user selects any one of this value the default value in another prompt Startdate and Enddateshould change,Here Startdate and Enddate is Editbox/calander control.
    Declared the presentation variable in first prompt and in the second prompt of SQL Results(Default to) i am writing
    +SELECT CASE WHEN '@{Pres}='WEEKLY' THEN VALUEOF(VAR_WEEKLY) END+
    but in the default one it was not showing the Repository variable value...
    Please suggest me any solution its an urgent
    thanks,
    saichand.v

    Hi Saichand,
    Are you getting an error ("Error Generating Drop Down Values")? Or are you just seeing a blank default value?
    If you are getting an error, do you have any presentation columns in your default SQL formula? If not, that's your problem. OBIEE won't let you construct a logical SQL query without having a presentation column in it somewhere.
    If this is your issue, try the following: SELECT CASE WHEN 1=0 THEN <PRESENTATION_COLUMN> WHEN '@{Pres}'='WEEKLY' THEN VALUEOF(VAR_WEEKLY) END FROM <SUBJECT_AREA>
    Be sure to replace SUBJECT_AREA and PRESENTATION_COLUMN with appropriate names. The condition 1=0 will never evaluate to true, so it's as if it's not there, but OBIEE will see that there's a presentation column in the formula and stop giving you the error.
    Good luck and if you found this post useful, please award points!
    Best regards,
    -Joe

  • How to pass a value to a filter prompt based on a value list?

    I have a query that has a filter prompt that is based on a value list. I want to call this query from another query as a drill down.
    So I build the URL to call the query and pass the value for the filter prompts as URL parameters. For the filter prompts that are simple text fields this works without problems, but how do I pass a value to the filter prompt that is based on the value list?
    I tried passing
    <parameterName>=<valueListId>:616:null
    and that gives me "None" for the value list prompt as expected.
    I then tried to pass the DisplayName (as I would do when setting a default value for the prompt).
    Like this:
    <parameterName>=<displayName>
    but that does not work.
    I also tried some variations/combinations like
    <parameterName>=<valueListId>:616:<displayName>
    but that does not work either.
    So does anybody know how to pass a parameter to the value list prompt?

    Hi Martin,
    I saw the following post which may help answer your question.
    How to default a Value List or Object Picker to a particular value
    Regards,
    Reshma

  • How to use Hierarchy Prompt

    Hi all,
    I want to filter my request based on the value chosen from a hierarchy prompt. I know that a filter on a hierarchy prompt can be applied in selection step by selecting "Override with Prompt". However, the hierarchy prompt filter only seems to be applied as long as the hierarchy object is displayed in the request itself. Even when moving the hierarchy to the Excluded section, the filter is no longer applied.
    In my case it really is useless to expect the user to select a value from the hierarchy prompt and then again display the value they've just chosen in the report.
    Is this expected behavior? Is there any workaround?

    Hi,
    We faced same issue in our previous project. I dont remember if we retained the same.
    It is really a problem as we can't assign a presentation variable also to Hierarchy prompt.
    Try this: Place the hierarchy column in prompt section of your view. You can apply master detail event from the prompt to report. Hide the view prompt(If you click on the drop down, you will have the option called hidden).
    Regards,
    Amrutha.

  • Error in report for activated hierarchy

    Hello Experts,
                          I have following problem in my report:
    I have created 1 hierarchy for 0cust_sales infoobject other than Standard hierarchy.to get this hierarchy in place have done following steps:
    created authorization object with 0cust_Sales + Authorization for hierarchy infoobject 0TCTAUTHH and actiavted it in required data target.
    created authorization value for above hierarchy and maintained in the user role.
    then created 1 report where hierarchy for 0cust_Sales is active and 1 authorization variable has been created for that hierarchy and restricted 0cust_Sales.
    in my data target already 1authorization object is active which is based on 0sales_off.
    in my report where I have assigned 0cust_Sales hierarchy, 0sales_off hierarchy is also maintained.
    Problem comes when am executing the report where 0cust_sales hierarchy is not active with message - NO MASTER MAINTAINED FOR 0CUST_SALES HIERARCHY.
    My problem is, I want 0cust_sales hierarchy only in 1 report but as auth object of 0cust_Sales is active on data target, error comes whenever report NOT CONTAINING 0CUST_SALES hierarchy is executed.
    How to deal with the situation where hierarchy required only for 1 report..please guide me

    Thanks Ingo. We are going to open the case.
    Do we need to pull consistent detail objects of all the13 levels in the hierarchy to the WebI query ?
    For Example, I have pulled all 13 level dimension objects (Blue), Org unit Key (Detail Green Object) for only L03,L04 and Org Unit Medium Name  (Detail Green Object) for L08,L09.
    Do I need to pull all 13 dimension (Blue Object), all 13 Org Unit Key and all 13 Org Unit Medium Name? I mean do we need to select consistent detail objects consistent across the levels?
    Thanks
    Jai

  • Setting multiple values for query prompt: In List...

    Dear All,
    I have used "Radio Button" component which has labels like A, B and C. If user selects A then Radio button save 10 as its value on Excel and which being used in queries prompts. If user select B then Radio button save 20 on Excel at Destination cell and all queries use this for prompt value. But when user select C which is the for both values 10 and 20. No queries executed successfully, values are in String and I tried following values for C in excel
    "10,20"
    10,20
      '10,20'
    10;20
    '10','20'
    10 20
    But when I execute this query at Dashboard Query Panel and selects both 10 and 20 as Inputs since I'm using In List operator then the query executes perfectly. See below the query:
    SELECT   Table__1."0CALMONTH",   SUM(Table__1."0INV_QTY"),   SUM(Table__1."0NETVAL_INV"),   Table__1."0DOC_CURRCY" FROM   "SD_C_ZSDIC"."PUBLIC"."IC_ZSDIC"  Table__1 WHERE   (    Table__1."0CALDAY"  BETWEEN  {d '2014-01-01'}  AND  {d '2014-06-13'}    AND    Table__1."0ACCNT_GRP"  =  'ZLOC'    AND    Table__1."0COMP_CODE"  =  '1000'    AND    Table__1."0MATERIAL__0DIVISION"  IN  ('10','20')    AND    Table__1."0CALMONTH"  <>  0    AND    Table__1."REFERENCE_DATE"  =  {d '2014-06-13'}   ) GROUP BY   1,    4 HAVING   SUM(Table__1."0INV_QTY")  <>  0 ORDER BY   1
    1. In which format I should save value of C, so that I can have '10','20' for the query prompts value?
    2. Am I missing something or my format of C values at Excel sheet is not correct on?
    I will appreciate your reply in this regard.
    Many thanks!!!
    Tariq Ashraf

    put the output of C
    in 2 cell
    for eg
    C1=10
    C2=20
    and map the 0MATERIAL__0DIVISION(prompt) to cell C1 and C2
    NOTE
    we have to write  formula in C1 and C2
    C1 = if radiobutton=b then 20 else 10.
    C2 = if radiobutton=c then 20 else ""
    map both cell c1 and c2 to the list prompt
    it will work

  • Passing two values in a column prompt for display and filtering

    Hi All,
    Is there a workaround to use two columns in a prompt for display and passing the input value for a prompt value in dashboard prompt? For eg we want to display the description in the prompt but pass the id to the filter value or presentation variable, just like we have in bi publisher,LOV automatically grab the two value for display and actual value to pass to the query.Therefore, user will click the description and corresponding id will be saved in presentation variable from the prompt .
    Thanks,
    Sushil
    Edited by: 872073 on Apr 5, 2013 11:06 AM

    Check this
    http://www.rittmanmead.com/2010/08/oracle-bi-ee-11g-handling-double-columns-iddescription-interoperability/

  • Document Summary, wrong values displayed for not persistent prompt

    Some prompt values displayed on the document summary portion of the document properties area are displaying incorrect values.
    It looks like non persistent prompts are showing the  value of the prompt listed just before the non_persistent prompt, instead of the value entered by the user.
    eg: persistent prompt 'enter code', user enters 1234
    non persistent prompt 'enter date', users enters 1/2/2008
    display in document summary:
    code - 1234
    date  - 1234
    Is this a known issue with Webi? I imagine it is not an issue with the report, but if so, please let me know if there is something I can do to correct it.
    Thanks!

    HI Nilanjan,
    Thanks for your suggestions but i do not have any data in Apshell to test if it is being displayed correct or not.
    Please advice me further.
    Regards,

  • How to retain the presentation variable values for Dashboard Prompt

    I've a dashboard prompt with date and two other drop down field, with default value as yesterday's date set for date and All Values set for other two drop down list. Presentation Variables are D1, P1 and P2 respectivilly
    I'm using GO URL from "Report A" and passing presentation variable to navigate to other report (Report B) that works fine. eg:
    '<a href = saw.dll?GO&path=/shared/Reports/ABC/ReportB&Action=Navigate&p0=1&p1=eq&p2="-%20Time"."Next%20Day"&p3=@{d1}>Test</a>'
    From Report B I'm using Dashoard URL to go back to Previous Report like:
    <div class="XUIPromptEntry minibuttonOn">
    Return to Previous Screen</div>
    This also works fine.
    My problem is that, when users selects different values in the Main dashboard prompt for date and other other two drop down and navigates to other report (Report B), and from Report B, when user returns to previous screen (Main Dashboard), Prompts values gets refreshed to original default values.
    Is there any way to retain the values of presentation variable in dashboard Prompt when I return to main dashboard from Report B?
    I'd appreciate your help.
    Thanks

    Change your dashboard url include the column and column value for the date column sample shown below,
    [a href=saw.dll?Dashboard&PortalPath=/shared/sample/_portal&page=pagename&Action=Navigate&col1=Dim.Date&val1=@1>Return to Previous Screen[/a>
    In my second report Date is the first column so I referenced it's value as @1 in the dashboard URL
    note: replace [ with <
    Thanks,
    Vino                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Error Message: The syntax of the value for prompt 'p_phone_num' is incorrect. Please correct the syntax and try again.

    Post Author: helpwithcr
    CA Forum: General
    " The syntax of the value for prompt 'p_phone_number' is incorrect. Please correct the syntax and try again."
    I am getthing this error while I tried to pass the value from an oracle package to the web when the the crystal report viewer kicks in.
    I found the source of the error. Its just a paranthesis that I used with the phone number inside the function.... The function looks like this
    function phone_number
    return varchar2
    is
    begin
    return '(123) 456 - 789';
    end phone_number;
    I really dont want that paranthesis to go. Its the format that everyone wanted. But they dont want that to be static on the report also
    Please help
    Thanks
    helpWithCr

    Sir, you are a legend!!! 
    Many thanks for putting me on the right track... 
    Here's where I went wrong and how I fixed it.
    First I installed the Azure Pack: MySQL Extension on the MySQL server.
    This was wrong, it needs to be installed on the WAP server/s.
    So I installed the extension on the WAP server and it still didn't work.
    So I uninstalled the extension from the MySQL server and it still didn't work.
    So I also installed the MySQL Connector/Net on the WAP server and it worked.
    This eventually fixed it. 
    What I will say is that in the documentation it doesn't mention installing the MySQL Connector/Net from the web platform installer on the WAP server (unless I have completely missed this)?
    Thanks again :-)
    Microsoft Partner

  • How to dispalay only 10 values for a prompt in a report

    Hi,
    We are displaying the values for a prompt through userresponse() function on the report.But the user want us to display upto 10 values for a prompt, thought he selct more LOV's for a prompt.Could anyone help me in sloving this issue.
    Thanks in Advance.
    Regards,
    Spandana.

    Hi,
    you need to define your database under the DB Admin tab. In the Schema objects node you'll find Sequence Implementations, and there you can definde min max values as well as caching and increments.
    Gerald

  • Forcing "No Values" for "Optional Prompt" parameter

    Hello,
    I develop the .NET web application with Crystal Reports 2008.
    I have the Crystal Report with one parameter.
    This parameter is "Optional Prompt" (ParameterFieldDefinition.IsOptionalPrompt = true).
    At first the webpage (with CrystalReportViewer control) shows the prompt field to enter parameter values, and "OK" button.
    If user doesn't enter any values and clicks button, data for default value appears.
    So the question: How can I force a showing the data for default parameter value, without prompt field appearance?
    In this case: user opens the webpage, and data for default value appears.

    Hi Ludek.
    1. Is SP3 required to get the answer?
    If so, I'll install it.
    2. The default value is the empty value.
    let me describe problem in details:
    The Crystal Report shows Customers data from MS SQL database.
    This Crystal Report has 1 parameter: CustomerID (string).
    If user enters value for this parameter, the report shows data only for Customer with entered CustomerID.
    But if user doesn't enter any value, all the data appears (for all Customers).
    So, the page with prompt field appears when user opens the web page with this report.
    If user enters some CustomerID and clicks "OK" button, the web page reloads and data for this Customer appears.
    If user doesn't enter any value and clicks "OK" button, the web page reloads and shows data for all Customers.
    This is the CORRECT behavior!
    But in some cases I need to omit the page with prompt field.
    I need to see data for all customers immediately.
    Is it possible?
    I tried to set "" (empty string) value for this parameter, but prompt field still appears.
    3. .NET version is 4.0
    4. Both - it happens on my development machine, and on other machine after deploy.

Maybe you are looking for