Setting multiple values for query prompt: In List...

Dear All,
I have used "Radio Button" component which has labels like A, B and C. If user selects A then Radio button save 10 as its value on Excel and which being used in queries prompts. If user select B then Radio button save 20 on Excel at Destination cell and all queries use this for prompt value. But when user select C which is the for both values 10 and 20. No queries executed successfully, values are in String and I tried following values for C in excel
"10,20"
10,20
'10,20'
10;20
'10','20'
10 20
But when I execute this query at Dashboard Query Panel and selects both 10 and 20 as Inputs since I'm using In List operator then the query executes perfectly. See below the query:
SELECT Table__1."0CALMONTH", SUM(Table__1."0INV_QTY"), SUM(Table__1."0NETVAL_INV"), Table__1."0DOC_CURRCY" FROM "SD_C_ZSDIC"."PUBLIC"."IC_ZSDIC" Table__1 WHERE ( Table__1."0CALDAY" BETWEEN {d '2014-01-01'} AND {d '2014-06-13'} AND Table__1."0ACCNT_GRP" = 'ZLOC' AND Table__1."0COMP_CODE" = '1000' AND Table__1."0MATERIAL__0DIVISION" IN ('10','20') AND Table__1."0CALMONTH" <> 0 AND Table__1."REFERENCE_DATE" = {d '2014-06-13'} ) GROUP BY 1, 4 HAVING SUM(Table__1."0INV_QTY") <> 0 ORDER BY 1
1. In which format I should save value of C, so that I can have '10','20' for the query prompts value?
2. Am I missing something or my format of C values at Excel sheet is not correct on?
I will appreciate your reply in this regard.
Many thanks!!!
Tariq Ashraf

put the output of C
in 2 cell
for eg
C1=10
C2=20
and map the 0MATERIAL__0DIVISION(prompt) to cell C1 and C2
NOTE
we have to write formula in C1 and C2
C1 = if radiobutton=b then 20 else 10.
C2 = if radiobutton=c then 20 else ""
map both cell c1 and c2 to the list prompt
it will work

Similar Messages

Set Default Value for People Picker in List Template current user

Hi,
I have field definition in my custom list
<Field ID="{26763808-64BB-4A3C-93A0-ED45AF783D45}" Type="User" Name="RequestedBy" DisplayName="Requested By" Required="FALSE" ></Field>
I need to set default current user in this.
I found few options with javascript.
Thanks in Advance.
Where I can find on set of default commands like Today
Hari

Hi,
Default current user can’t be got in calculated column like Today. I suggest that use SPD Workflow described above or JavaScript. Open NewForm page of the list, then add “pageview=shared&toolpaneview=2”
to the page URL, click Enter to go to edit mode. Then add a Content Editor Web Part to the bottom of NewForm page, copy the code bellow into Source Editor of CEWP.
<script type="text/javascript" src="http://code.jquery.com/jquery-latest.js"></script>
<script type="text/javascript" src="http://come:100/sites/collection1/Shared Documents/jquery.SPServices-0.7.0.js"></script>
<script type="text/javascript">
$(document).ready(function(){
var CurrUser=$().SPServices.SPGetCurrentUser({
fieldName: "Name", debug: false});
$('#ctl00_m_g_dab5800a_09ac_4f35_97f6_9b5496127f68_ctl00_ctl04_ctl02_ctl00_ctl00_ctl04_ctl00_ctl00_UserField_upLevelDiv').html(CurrUser);
</script>
Note:
download jquery.SPServices-0.7.0.js here and upload it to your own site:
http://spservices.codeplex.com/SourceControl/list/changesets, and then replace the route of jquery.SPServices-0.7.0.js above with the route in your site. ctl00_m_g_dab5800a_09ac_4f35_97f6_9b5496127f68_ctl00_ctl04_ctl02_ctl00_ctl00_ctl04_ctl00_ctl00_UserField_upLevelDiv
is the id of the people-picker, please find it in your own NewForm page.
Another method, you can use Event Handler. Here is the example code.
public
override void ItemAdded(SPItemEventProperties properties)
if (properties.ListTitle == "listname")//replace listname with your list.
SPWebcurrentWeb = properties.OpenWeb();
SPUseruser = currentWeb.SiteUsers.GetByID(properties.CurrentUserId);
SPListItemliitem = properties.ListItem;
SPFieldUserValuefieldUser =
newSPFieldUserValue(currentWeb, user.ID, user.LoginName);
      liitem["currentuser"] = fieldUser;//replace currentuser with your field name.
      liitem.Update();
//base.ItemAdded(properties);
If anything unclear, please feel free to ask.
Thanks.
Emir Liu
TechNet Community Support

Set default value for people picker only when user checks a checkbox (Sharepoint 2010)

The javescript in below link works for me.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/2b130f64-3db2-484a-9a53-ccbe18d2c5de/set-default-value-for-people-picker-in-list-template-current-user?forum=sharepointgenerallegacy
However, I'd like to set default user for people picker only when user checks a checkbox.
I am new to development. Could you please help me on this requirement ?
Thank you very much.

Hello,
Use this link to to validate checkbox value, if true then set the person or group value (i.e. as posted in your link).
http://geekswithblogs.net/haniamr/archive/2011/03/10/validate-that-a-checkbox-is-checked-using-javascript.aspx
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Multiple Values For one Condition in Choose From List

I have used one Business Partner Choose From List in my form but i want to give condition in that choose from list on GroupCode .But the condition will have multiple values like 100,102,104 then how i will write the code to incorporate multiple values for one single condition.

Hi,
Check this thread
How to set a Multiple condition in a single CFL
Hope that helps,
Vasu Natari.

Selecting multiple values in a prompt for a BI Publisher report

Hi,
I selected multiple values in a prompt for a BI Publisher report and ran the report. The report run fine with single value. But it run to error with mutiliple value. The Oracle Business Intelligence Publisher version is release 11g (11.1.1).
Thanks in advance
Susan

Thanks for your replies !
Is there any other way to achieve this ?
There is 1 InfoObject which has 2 fields Employee and Department.
Employee     Department
001                A
001                B
001                C
In the report there should be 1 row for Employee 001 with all the Departments displayed in the same cell separated by commas.
Can this be done in the backend through a ABAP code?

Any way to pass Multiple Values for a single Label in the Parameter?

I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0

Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

Set multiple values in a web template via JavaScript

Hi,
I have a web template displaying a query containing a mandatory variable. Multiple values are allowed for the variable.
By manually inserting a link in the template I succeeded in setting a single value for the variable with JavaScript, but how is it possible to pass multiple values for that variable?
So far my link target looks like this:
"sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&
TEMPLATE_ID=ZJS_WT_1&VAR_NAME_1=ZJS_V_R&VAR_VALUE_EXT_1=1"
How do I have to modify the line?
Cheers,
Jost

Jost -
I haven't tried this yet...but I suspect it could work. In the below example, I have a variable on Company Code and am setting it equal to 3 different values. Give it a shot.
&CMD=PROCESS_VARIABLES&SUBCMD=VAR_SUBMIT
&VAR_ID_1=ZCCMPCOD0001
&VAR_ID_2=ZCCMPCOD0001
&VAR_ID_3=ZCCMPCOD0001
&VAR_OPERATOR_1=EQ
&VAR_VALUE_LOW_EXT_1=IP01
&VAR_VALUE_HIGH_EXT_1=
&VAR_SIGN_1=I
&VAR_OPERATOR_2=EQ
&VAR_VALUE_LOW_EXT_2=IP05
&VAR_VALUE_HIGH_EXT_2=
&VAR_SIGN_2=I
&VAR_OPERATOR_3=EQ
&VAR_VALUE_LOW_EXT_3=IP50
&VAR_VALUE_HIGH_EXT_3=
&VAR_SIGN_3=I

Set a value for a variable of type exit

Hello,
I am filling some variables with multiple values in user exit.
Now, i would like to place some of these characteritics in Header area. It's of course impossible because there is multiple values but ...
I will put dropdown box in the web application for these chars. The problem is that by default, any value is assigned to the dropdwom ( any variable value is set).
Do you know how i can set a value for theses variable after filling all values by the user exit. SO that only one value is selected for the header and all others values available in the dropdown ?
Regards,
Jarod

Hi,
Off late, this seems to be a usual requirement.
Just create a Z program to call the FM API_SEMBPS_VARIABLE_SET and then call the FM API_SEMBPS_POST.
you should be preparing the content/set value to pass to the FMs. check the whereused list to see how this FMs can be used/called.
finally, run this program for your variable, after the loading/filling the exit variable. Please note that to set 'exit' variables, the sourcing variable's content need to be read/set first before setting the exit varible.
HTH,
Regards,
Nataraj.

How to passing multiple values for a parameter of discoverer(url parameters

Hi All,
I am trying to pass multiple values for a parameter of disco report. I am trying to include my url for discoverer viewer report. the values has the following
'jeff,mark'
'sfophiee,angela'
Thanks and Regards
Venkat

Hello Venkat,
I know there are some problems with 10.1.2.0.2, maybe if you haven't done yet you can try with 10.1.2.2, assuming this version should be working for multiple parameter values :
OracleAS Discoverer 10.1.2.2 is installed with the following patch :
Patch 4960210 PLACEHOLDER BUG FOR AS/DS 10G R2 PATCH SET 2 10.1.2.2
So, once installed you can try adding your parameter as param_<parameter_name>='sfophiee,angela'
Hope this helps, otherwise feel free to log a Service Request to Support.
Best Regards,
Gianluca

Setting default values for item in opportunity mgmt(crmd_bus2000111)

Hi All,
I need to set default values for the field Fiscal Quarter in item level using BADI CRM_CUSTOMER_I_BADI .This Field is created using EEW. The default value is like if the date is nov-2007 the value for this fiscal period is FQ4-2007 .
Any clue would be great help..

Why don't you try setting the default value in the List next to the Matrix - item 107
Item 107 is a matrix (a transposed one), I have no idea what list you mean... I am using item 107, not 112. Item 112 is used only to detect a click on the "Add Record" button, which is the last row of the matrix 112.
I don't see the gender column in the grid and I'm also unsure of the id you have for it "12" - are you sure it's correct ( i usually use Item("columnName") )?
Sorry for the confusion. "12" is the name of the standard column "Password" which we have renamed to store the gender.
Anton

Multiple values for one key in hashtable k, v

So, I know that java.util.hashtable (as of Java 1.5) uses separate chaining to handle collisions. What I want to know is how to get a certain value somewhere in that bucket if they all share a common key? Javadoc says I have to search it sequentially but doesn't say how.

OK, there's a lot of confusion on here for such a short thread :-)
Firstly, HashMaps pick which "bucket" to store your object in based on the hash value of your object (see Object.hashCode()). However, the actual object equality test (applied to the keys during a search) is based on Object.equals(). Therefore which bucket your object is in is irrelevant - the bucketting concept is just used as a way of quickly locating a subset of all the keys in the map which might match your search value. There could very well be just a single bucket in a map and it wouldn't change its logical behaviour.
This statement: "any Map including Hashtable, can only have a single (key,value) pair" is poorly worded. What it should say is that for any given key, a map can only hold a single value.
Really, you don't need to think about the internal structure of maps (i.e. buckets, etc.).
If you want to store multiple values for any given key, then make your value a list (java.util.List) and store your multiple real values inside that list.

My query prompts does not appear in the Query prompt order list!

Dear colleagues,
All of my query prompts does not appear in the Query prompt order list in properties of the query. It seems random which of them that appears there and not.
This makes it impossible for me to control or change the order of prompts, instead they order themselves alphabetically.
Is this some kind of bug? Is there a fix for this problem?
Regards
Silje

Hi Stratos,
We use Edge.
Correction- we use Enterprise, changed a few months ago!
By the way, we heard about a bug that probarly causes the problem.
If the query has ever had a prompt containing 'Between', all prompts created afterwards will not appear in the prompt order list! Even if the between-prompt is deleted.. We still havent heard about a fix for this, please contact me if you hear anyting. It is not an option to create all the queries from scratch again!
Silje
Edited by: Silje Mari Sunde on Oct 22, 2009 9:24 AM

Multiple values for the Parameter

1. Had any tried the selecting MULTIPLE values for the parameter in Oracle Discoverer Plus Releae 4.1 Version 4.1.37.00.0. If so can please let me know how to implement it.
2. In a Page-Detail Cross Tab workbook, I have to show the weighted average instead of the avg or sum. Any inputs please.
3. I have to compare two periods (TOP) of datapoints. Any inputs please.

If you wanted to eliminate the need for users to type in the parameter values, you could create a LOV on the desired column. This will produce a distinct list of all valid values where the user would simply select as the wish. Of course you still need to check the "let user enter multiple values" checkbox if you want them to select more than one.
-DG

Multiple values for an attribute ?

Is it possible to accept multiple values for the same attribute ?
(such as a multi-select list, like Portal perspectives)
Thanks

Is it possible to accept multiple values for the same attribute ?
(such as a multi-select list, like Portal perspectives)
Thanks

Creating multiple profiles, using unified profile types, to store multiple values for same properties

Hi All:
I am trying to create multiple profiles, using unified profile types, to
store multiple values for same properties. Here my intention of using
'unified profile types' is to create multiple profiles (to store multiple
values for a property). All the properties are stored in the same database
maintained by Personalization server. Also, I am trying to use the same
'USER' ejb as profile class/home/pk/jndi.
The scenerio is,
define unified profile types (Business, Vacation) using Personalization
admin tools, using com.beasys.commerce.axiom.contact.User,
com.beasys.commerce.axiom.contact.UserHome,
com.beasys.commerce.axiom.contact.UserPk,
com.beasys.commerce.axiom.contact.User for Profile Class, Home, Pk class,
JNDI name respectively.
Define Property set 'HotelCommerce' with property
HotelProp as single, restricted, text (valid values Single, Double)
Now you can use the attached jsp files to login as a user and try to set the
property value for HotelProp for each profile. As per my understanding, I
was expecting that I can set different values for the property 'HotelProp'
for each profiles. But unexpectedly, all the profiles get the same value.
Question. is it the correct behavior? if yes, how can I achieve this
functionality?
if not, do you see any problem in my scripts?
your answer asap is appreciated. we need to make decision on using
Personalization server v/s developing our own Personalization server!!!:)
thanks,
-rajesh
PS: I have tried 'Unified Profile Example' type too, but that did not work.
[propsettest.jsp]
[home.jsp]

I am trying to create multiple profiles, using unified profile types, to
store multiple values for same properties. Here my intention of using
'unified profile types' is to create multiple profiles (to store multiple
values for a property). All the properties are stored in the same database
maintained by Personalization server. Also, I am trying to use the same
'USER' ejb as profile class/home/pk/jndi.Hello Rajesh,
This is not the purpose of the UUP. The UUP is used to allow existing
database schemas to be aggregated with the existing Weblogic Personalization
Server database schema to provide a single, customized user profile with which
to maintain the user properties (
http://e-docs.bea.com/wlcs/p13n/users.htm#1068901 )
If you want to have properties that change value based on some "profile" or
classification of a user, then you should use classifier rules to change the
user from "OnVacation" to "AtWork" or "AtHome". You can use these classifier
rules to select content for the user or conditionally execute logic (
http://e-docs.bea.com/wlcs/p13n/rules.htm )
Ture Hoefner
BEA Systems, Inc.
1655 Walnut Street; suite 200
Boulder, CO 80302
www.beasys.com

Setting multiple values for query prompt: In List...

Similar Messages

Maybe you are looking for