Limit to one execution in the Simple OI

I have a customized OI that's running well. However, the user can still hit the "Single Pass" button multiple times while things are running.
What is the best way to prevent this?
This old post says you can disable the button after it's clicked (from LV) but I am finding that setting button properties from LV is not the best way to go- they get overridden by the TS engine.
Suggestions?

You have the reference to the "Single Pass" button control. You will find an "Enable" property for this.
Set this property in the "StartExecution" to "False" and in "EndExecution" back to "True". Both are callbacks you have to define. They are message events from the ApplicationManager.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Similar Messages

Exchange 2010 SP2 RU2 - Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases

We have been getting intermittent SCOM alarms for our Exchange 2010 MBX server citing "Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases"
I see events in EventViewer that SCOM is triggering on, but not whats generating the events or how else to test for them.
    get-eventlog -computername SERVERNAME -logname "Application" -after "03/14/2013" | ?{$_.eventid -eq "5604"} | select MachineName,EventID,EntryType,Message | ft -autosize
One MS Forum post online says it is a bug in RU4, unclear if it may also be a bug in RU2 (our installed version).
    http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/9dcb3011-9327-4935-9479-62b38a6ddd87
    "I was looking for the same error and found this.. it basically says that this is a bug in RU4 and RU4-v2...and it needs to be removed."
tests using troubleshooting scripts find no issues with search indexer,
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>.\Troubleshoot-CI.ps1
    Get-EventLog : No matches found
    At C:\Program Files\Microsoft\Exchange Server\V14\scripts\CITSLibrary.ps1:622 char:40
    + $msftesqlCrashes = get-eventlog <<<< -computername $Server -after $StartTime -logname "Application" -source $msftesqlServiceName | where {$_.eventId
    -eq $msftesqlCrashEventId}
        + CategoryInfo : ObjectNotFound: (:) [Get-EventLog], ArgumentException
        + FullyQualifiedErrorId : GetEventLogNoEntriesFound,Microsoft.PowerShell.Commands.GetEventLogCommand
    Name IsDeadLocked CatalogStatusArray
    SERVERNAME False {DATABASENAME\SERVERNAME, DATABASENAME\S...
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>
and tests against searches on each DB themselves show no issues and respond typically within 3 seconds.
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>Test-ExchangeSearch | ft Server, Database, ServerGuid, ResultFound, SearchTimeInSeconds, Error -AutoSize
    Server Database ServerGuid ResultFound SearchTimeInSeconds Error
    SERVERNAME DATABASENAME b16e3461-257c-40dd-a9ad-99a5f41a927e True 2.937
I also tried to check the Performance Viewer for the MSExchange Search Indexer and MXExchange Search Indices but am unsure which of the many metrics would indicate this issue.
We have had no reports of search issues from our users and have been unable to duplicate any impairment in our testing.
Does anyone else have any suggestions for tests to check or steps to take on this alert? Is it simply a false alarm or a timeout of other sorts during testing? We have 80 DAGs on this server (as well as all our servers, some of which have also reported the
same alert) and the Test-ExchangeSearch command times out before completely testing all DAGs.

Hi IAMChrisL,
Any updates?
Frank Wang
TechNet Community Support

Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes? Both my daughters have ipods, my wife has one

Dear All
Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes. My daughters have a different generation 'nano' each & my wife a 'shuffle'?
Many thanks

Click here for options.
(69081)

SMQ2: SYSFAIL Comparison error during the execution of a simple

Hi folks, I have an operation mapping interface determination with exactly 1 target message of occurence 0..1, that means the mapping output can be nothing for some input messages, that means a target message is not produced so that the output looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<Messages><Message1/></Messages>
In services builder the test finishes successfully when no output message is produced. Also in integration builder i can test the configuration and it works without errors.
But in runtime the message status is set to "Recorded for Outbound Processing" in SXI_MONITOR and the queue status of the message to "Message has errors". The message stops in SMQ2 with "SYSFAIL" as status and statusText "Comparison error during the execution of a simple" (truncated).
Anybody experienced the same? How has the output of an operation mapping to look like when no target message is produced?
I also tested with an output like this when no target is produced, but this results in System error "Split mapping created no messages" in SXI_MONITOR:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1></ns0:Message1></ns0:Messages>
Thanks for your help, best regards, Martin

You seem to be having a multi-mapping involved.
The operation mapping has to produce at least the start and end tag.....even if the entire message is not present
Ex:
<SRC>
<First>
<Middle>
<Last>
</SRC>
If above is the structure, then it should be ensured that at least <SRC></SRC> is created by your mapping program....however in your case this is not happening....the tags that you see Messages and Message1 are due to the multi-mapping program and your message should be more than this.
if you say that occurence is 0..1 then what you can do is map this 0..1 node (root) with at least a blank Constant.
Unless you create a message (even though empty) you will continue to receive the error message.
Regards,
Abhishek.

Can we create the two conatiners fscm (9.0) and hcm 9.1 into one execution

Hi ,
can we create the of the different (peoplesoft)adaptors into one execution plan.
i cretaed the two conatiners from psft-fscm 9.0 and psft-hcm 9.1
,create one execution plan ,get the parameters then build getting the follwing error.
HR Workforce 9.1 with FSCM 9.0MESSAGE:::For Node SDE_PSFT_Stage_InternalOrganizationDimension_CompanyHierarchy_DeriveRange(DataWarehouse_HR->DataWarehouse_HR) there are conflicting folder informations from this execution plan
SDE_PSFT_90_Adaptor and SDE_PSFT_91_Adaptor
Please set the priorities for the physical folder (lower priority gets higher preference).
EXCEPTION CLASS::: com.siebel.analytics.etl.execution.ExecutionPlanInitializationException
com.siebel.analytics.etl.execution.ExecutionPlanDesigner.design(ExecutionPlanDesigner.java:1321)
com.siebel.analytics.etl.client.util.tables.DefnBuildHelper.calculate(DefnBuildHelper.java:169)
com.siebel.analytics.etl.client.util.tables.DefnBuildHelper.calculate(DefnBuildHelper.java:119)
com.siebel.analytics.etl.client.view.table.EtlDefnTable.doOperation(EtlDefnTable.java:172)
com.siebel.etl.gui.view.dialogs.WaitDialog.doOperation(WaitDialog.java:53)
com.siebel.etl.gui.view.dialogs.WaitDialog$WorkerThread.run(WaitDialog.java:85)
we are using
DAC 10.1.3.4
Informatica 9.0.1
peoplesoft 90 and 91 adaptors
thanks in advance...
Regards,
sairam....

Hi All,
Please Update the Thread
Regards
Khanna

Can I say one thing? The design of 3D is too confused!!! I know the drawing 3D and this new tools in Photoshop aren't simple, it's too difficult to understand

Can I say one thing? The design of 3D is too confused!!! I know the drawing 3D and this new tools in Photoshop aren't simple, it's too difficult to understand

Photoshop's GUI for the 3d functionality has always been a bit of a bust. And slow, cumbersome, hard to control. Rendering quality remains a major headache (and slow as a snail crawling through mud). Texturing is a hassle, and the 3d viewport one of the worst implementations I have ever encountered.
Which is why I have always avoided it, and I prefer 3d applications such as Blender, Cinema4d, Max, Lightwave, and so on, for quality work. The 3d functionality in Photoshop is adequate for relatively simple 3d typography, and simple shapes. But even for that type of work I avoided Photoshop.

Job skipped: An execution in the current run or one of the previous runs wa

What does it means this error when jobs fail and how can be avoided? That is really boring..
Skipped Reason: An execution in the current run or one of the previous runs was suspended by the system.
Thanks
Rosario

It means exactly what it says. One of the previous runs of this job is in a Suspended status. Look at all the past executions until you find a Suspended run, then either resume or stop it.

Hints why all Update Routines are coming with 0.00. Even the simple ones?

Hi,
any hints why about 5 update routines that I have written are coming with 0.00 or blanks.
Even very simple ones such as the one for MyCclQTY in the cube, which has the only line in the update routine between ODS and Cube:
RESULT = SOURCE_FIELDS-QTY.
shows in the cube output as blanks while QTY has data:
e.g. of Cube Output:
QTY-Field2-MyCclQTY----MyCalField2
300--125--BLANK--
0.00
600--42.9-BLANK--
0.00
Basically all my routines, e.g. MyCclQTY, MyCalField2
are not showing values while the direct mappings show the correct data.
In the above simple case, with the routine shown above, I expected to see 300 and 600 for MyCclQTY but they come out blank.
Any hints as to what may be wrong?
Thanks

<Font Face="Tahoma" Color="Blue">
Dear Friend,
Can you please try
RESULT = COMM_STRUCTURE-Qty.
Also please check that you have assigned correct Unit of Measure in the field "Unit of Routine".
Hope it helps.
Regards,
Abhijit
</Font>
Edited by: Siegfried Szameitat on Nov 3, 2008 12:23 PM
deleted request for points. it is against the rules.

Two SNC system and one execution system

Hi Experts
Can there be possibilty of Two snc system to co exist with one execution system ECC?
IF yes can you folks please throw some light on the same?
This situation is arising because:
the Lime table in the existing system has really grown huge and the archiving is not helping becuase there are new records that are added to the system every day which are more than the archiving records
because of this huge data the upgrade is not possible and we are planning for a new setup, now to mitigate the risk we were tryin if two SNC system can coexist with one EEC system.
Now to add to the problem is there are certain business scenarios because of which we need to put in data in lime table every day
so reduction in data input is not possible.
As the data in LIME is only stock of the customer coming every day and if we just transaction data , even if we go away with all the data is not an issue with us as customer reports his existing stock on daily basis to us.
We have even thought of truncating all the tables available in in lime objects in SARA, we are thinking of this becuase system might act erratic when we setup new system and slow try moving few customer from existing to new system. as a pilot.
Supposing if we go ahead with it ,wht could be the issues ?
Thanks for all your help and suggestions
Regards
Manas Malhotra

Hi Manas
Two SNC systems can coexist together.
You need to define seperate Business System Groups,RFC settings,Logical System definition
Also you need to have seperate Identification for your master data, create your own definition in BADI
Example:If you are sending same material XXX to two SCM systems how to diferrentiate ???
Because BADi methods EXIT_/SAPAPO/SAPLCIF_LOC_001 & EXIT_/SAPAPO/SAPLCIF_PROD_001
differentiate when two ERP systems are connected to one SNC system by prefix and sufix, now you need to have your own code to differentiate
Also big time care should be taken in defining the distrubution models (bd64) and even in XI/PI like
Example: we have two TM systems coexisting with one ERP, so we used conditoned based mapping
Itu2019s a condition based mapping.
1) When TransportationRequestSUITERequest/TransportationRequest/ShipToLocation/InternalID = BP1 or BP2 or BP3 u2026 the receiver is I5YCLNT100
2) When TransportationRequestSUITERequest/TransportationRequest/ShipToLocation/InternalID = BP4 or BP5u2026the Receiver is I5XCLNT100.
Also care should be taken on master data/FICO settings which both systems use in common. like using Ztypes instead of using standard one like order type, message type. It should be easy when you troubleshoot back!!!
The inbound message parameters should be taken care w.r.t business needs
Good to have a matrix mapping like what business process coexit in both systems and which doesnot and then try to see what settings need to be tailored???
Best Regards
Vinod

Primary key vs Secondary key - why would a rpt hit one as to the other?

Post Author: kevans
CA Forum: Data Connectivity and SQL
Here's an issue that surfaced when using CRW10, happens with XI as well, but not an issue with CRW8 - each one is hitting the same SQL Server db.
I discovered something today and I'm not sure if this might be the road to a solution, however, I don't know enough about SQL Server and/or Crystal. First, my reports seem fairly simple in nature, I don't think I'm pulling a million rows of data, maybe but doubt it. So I run report ABC and I see blocking issues in SQL Server Enterprise Mgr. If I run report XYZ that isn't too much different than ABC, I do not see blocking issues. Hmm, what could be different? In SQL-Mgr when I look at the SPID info generated by the report I can see the tables the report is referencing and below is what I discovered.
The one difference I see is under the "Index" column - the report blocking shows "XPKcall_req" where call_req is the table I'm pulling from. The report that IS NOT blocking shows call_req_x0. I checked with our dba and he wasn't sure, other than to say XPK is the primary key index. Okay, then why is one report hitting the primary key index (whatever that is) and the other isn't? In Crystal I'm not sure how to tell it to stop doing this, I tried shaking my finger and yelling but like my kids this does little.
Any ideas, with the report that is?

Post Author: kevans
CA Forum: Data Connectivity and SQL
Here's an issue that surfaced when using CRW10, happens with XI as well, but not an issue with CRW8 - each one is hitting the same SQL Server db.
I discovered something today and I'm not sure if this might be the road to a solution, however, I don't know enough about SQL Server and/or Crystal. First, my reports seem fairly simple in nature, I don't think I'm pulling a million rows of data, maybe but doubt it. So I run report ABC and I see blocking issues in SQL Server Enterprise Mgr. If I run report XYZ that isn't too much different than ABC, I do not see blocking issues. Hmm, what could be different? In SQL-Mgr when I look at the SPID info generated by the report I can see the tables the report is referencing and below is what I discovered.
The one difference I see is under the "Index" column - the report blocking shows "XPKcall_req" where call_req is the table I'm pulling from. The report that IS NOT blocking shows call_req_x0. I checked with our dba and he wasn't sure, other than to say XPK is the primary key index. Okay, then why is one report hitting the primary key index (whatever that is) and the other isn't? In Crystal I'm not sure how to tell it to stop doing this, I tried shaking my finger and yelling but like my kids this does little.
Any ideas, with the report that is?

How do I alter the html in the simple form contact us so it will upload and function on Bluhost?

All representatives are actively assisting other customers. Your estimated wait time is 7 minute(s) and 0 second(s) or longer. Thank you for your patience.
All representatives are actively assisting other customers. Your estimated wait time is 6 minute(s) and 30 second(s) or longer. Thank you for your patience.
All representatives are actively assisting other customers. Your estimated wait time is 6 minute(s) and 30 second(s) or longer. Thank you for your patience.
All representatives are actively assisting other customers. Your estimated wait time is 7 minute(s) and 0 second(s) or longer. Thank you for your patience.
All representatives are actively assisting other customers. Your estimated wait time is 6 minute(s) and 30 second(s) or longer. Thank you for your patience.
All representatives are actively assisting other customers. Your estimated wait time is 6 minute(s) and 30 second(s) or longer. Thank you for your patience.
All representatives are actively assisting other customers. Your estimated wait time is 6 minute(s) and 0 second(s) or longer. Thank you for your patience.
You are now chatting with 'Parikshit'
Parikshit: Hello K.
Parikshit: I read your issue description.
Parikshit: The form doesn't upload there. Does the form work fine when you test it on your computer by previewing in browser from Muse?
k: hello I am examining my page in developer ( source) in safari and I can see lines of tesst that say the server encountered and error.
k: If I export to my desktop, I can see the form but it does not work. If I upload it does not appear at all, and that is in not what adobe says the form will do. Adobe says the form will APPEAR but not function. It does not appear OR function. I had tried the 3 versions of php.... now I need to see a working form to a usual, commercial host so that I can copy the relevant code.
k: lines of text
k: And no, it does not work when I preview in browser
k: When I preview to browser it does turn red for a while.... but it doesn't do anything.
Parikshit: Can you publish the site in BC one to check if it works, if it doesn't then there must be some issue with the form itself. It's code.
k: no. I do not have a subscription and my client does not want BC used at all. I have the new CC muse which is supposed to finally work without having to upload to BC.
k: I have several cloud subscriptions, when cloud ever starts to work....
Parikshit: You don't need to work in BC or have it as your host. This is just to test if it works.
Parikshit: Just a trial site.
k: but my client refuses to have anythig to do with BC, and I don't blame them. They had bad experiences inthe past and do not want to do anything that involves BC.
Parikshit: You won't have to pay for the site.
k: I don't want to involve BC because I promised my client I would not go there. They were very insistant. We were finally going to use Muse because you no longer are required to use BC. BC was the big sticking point. But if I can't do this without using BC, then I am right back to where I was year ago. No better.
k: I think I have a limited number of occasions when i can use BC, and I don't want to do it now for this simple contact form. What a cheat.
k: What other functions in Adobe Muse CC won't work unless they are euphemistically " tested" on BC? Save me the time and dissappointment tryig to use this software.
k: Adobe states that the form will appear when uploaded to a outside site, but not work. The form does not upload, and the form does not appear. I tried version 5.2,5.3, 5.4 and then put php back to version 5.3.
Parikshit: There is nothing wrong with it. Did you change the code of the form?
k: no. And there is plenty wrong with it, it does not appear. I did not change the code because I want to look at a sample that has been altered to make sure I alter it the correct way. Where can I find the page source of a page that has the simple contact form widget used and uploaded to a commercial hosting site, and the forem works.
k: form works
k: This was a bug that was described last year and the release of this version advertised it had been corrected. It is not corrected.
Parikshit: It is corrected and several users are able to use it fine.
k: Then send me a page from one of the ones that is working fine.
k: who are those several users? Give me names.
Parikshit: there is either something wrong on the host's end that this doesn't get uploaded. We've already had many users upload it to an external hosts. We don't keep user site URLs with us, and hence I won't be able to provide you with one. But the best method here would be to post this on our forums, and then all our forum members (including users who have successfully implemented this) will be able to see the post and reply to it.
k: I've seen them all complaining that this still doesn't work. Perhaps you should encourage some of the successful uploaders to post to the forum. Send me a link. I had numerous tech support people at the host check this and there was nothing wrong with their PHP or the upload path.
Sorry, our chat session has ended due to circumstances beyond our control. Please feel free to contact us again if you need further assistance.

Can you supply a link?

How to populate a filter field in one page with the value from other page

Take the classic report with form application.
on page 1 (report) I have a filter (dbname) for the records that will appear in the report. Say that, I enter "ap02" in the filter and all records where dbname starts with "ap02" will display. It works ok.
Then I click on "create" button and page 2 appears. I enter all fields except the dbname. This field is generated, at "pre-insert trigger on the table".
What I want is when I press the button "create" on page 2 to pass the value of the generated dbname field into the filter in page 1 so when that page refreshes I will have only one record on the report page (1). I understand that the dbname at the page 2 level still empty because it is generated by the trigger. How do I have access to that info to populate the filter.
Thanks for your assistance

Joe - Work backwards from the value generated during the execution of the trigger. You have the value there so you could save it into a package variable right then (create a package with a variable and assign the value to the variable). Then create a process on the page (after the DML process) to assign the value of your package variable to a page item. Then in the branch back to page 1, pass the item. (Or without messing with the branch, the process could simply assign the package variable directly the the page 1 item -- :P1_ITEM := my_package.my_var; ).
An alternative would be to use the "returning into" feature of DML to capture the PK of the created record into an item. Then the next page process could use the PK to fetch the new row and get the dbname value for passing to page 1.
Another option would be to update session state directly in the trigger.
Scott

I've noticed that in the new version of Firefox that you cannot save multiple tabs at one time like the previous Firefox 3.6.or so and I wanted to know if I can find that feature again?

I've noticed that in the new version of Firefox that you cannot save multiple tabs at one time like the previous Firefox 3.6.or so and I wanted to know if I can find that feature again?
In the previous versions of Firefox when you went to you Bookmarks menu it gave you the options to either Bookmark This Page 'command' + 'D', Subscribe to this Page, Bookmark All Tabs 'up-arrow-key' + 'command' + 'D', and Organize Bookmarks 'up-arrow-key' + 'command' + 'B' however in the newest version of Firefox there is no Bookmark All Tabs so you can bookmark all the tabs that you have up in one window at a time. So I need to know if it is possible that the feature is now in a different place, is gone altogether, or if you can get that feature another way?
For me personally and my work I go through hundreds of web pages a day and save around half of those so it is imperative that I be able to bookmark more then one tab at a time because I can't be bothered to bookmark every single page separately and then go through hundreds of tabs in my Unsorted bookmarks in order to sort those bookmarks. It is simple inconvenient to sort every bookmark individually that is why the previous version of Firefox with the Bookmark All Tabs button was superior in its convenience.

Right click any tab and choose "Bookmark All Tabs".

Only one user at the time can execute VE01 (due to blockage of VEIAV)

Hi,
As I understand it only one user at the time can execute VE01 (or MEIS for arrivals). If someone is already executing the VE01 transaction the error-message "Table VEIAV is blocked by user XX" appears. It does not matter if one tries to execute it for different legal entities - no parallel processing seems to be possible.
This is a huge limitation for a global concern with many entities operating in the same SAP instance. Does anyone recognize this problem and are there any ways to get around it? It does not make sense that dispatches (VE01) and arrivals (MEIS) cannot be executed for several organizational units at the same time in parallel?
Thanks in advance,
Mats Hansson

yes I know this problem.
One should not maintain much thru this transaction.
for me it is not more than an emergency transaction, as it is not really more than table maintenance thru SM30
You should investigate what entries/changes the users have to make.
Limit these manual entries by having better data in the system, so that SAP can itself create the entries for this table.
Organize more, less users , maybe just one per company who shall maintain VEFU manually.
Train them to prepare their entries before they start using VEFU.
Explain that they should leave VEFU as soon as possible as the block other users.
assign maintenance windows to the users.

Add Suppporting Details for more than one periods at the same time for the same Account in Planning.

As we know, in planning form, we can add supporting details to one cell for the level 0 members intersections.
But can we do that as below:
add supporting details for more than one cells at the same time?
I tried to do that in workspace and smartview, neither is working.(my workspace version 11.1.2.2.300.20)
I wonder if i am not with the right version, because i don't know how to get the below.
Can any one explain?
Thank you.

Hi,
I have tried in Smartview for a simple form where my period dimension was in columns and accounts in rows.
You need to select multiple period and select supporting details, it will show those selected period for which you can add the supporting details.
You can add these details and then submit the data in the form.
Regards,
Sourabh

Limit to one execution in the Simple OI

Similar Messages

Maybe you are looking for