Limit traffic on router interface

Dear all,
how can i limit Upload/download bandwith on router interface.
please help me
thanks with regards
vikas kumar

HI,
You can police the traffic in ingress/egress but the support may depend of your hardware. Please refer to the following link for more information:
http://www.cisco.com/en/US/partner/docs/ios/qos/configuration/guide/polcing_shping_oview_ps6350_TSD_Products_Configuration_Guide_Chapter.html
HTH
Laurent.

Similar Messages

RV180W Routing Web traffic to Router Interface

Initially we had a rv110w in place and had problems with the port forwarding stopping a few times a day so we replaced with with a RV180W. Now port forwarding appears to be staying up, however I have a new problem. We host a web page, for some reason when an internal user points the url to the web page it resolves to the web interface of the Router and not the expected web page. If you are outside of the network it resolves to the correct web page. I am not sure why this is happening as it didn't happen with the RV110W or the PIX before that.
Thanks
Jeremy

Hi Jeremy, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. I just want to say thank you for your contribution that will be really helpful for all forum users.
I think there is another way to resolve this issue, creating a second forward rule from the LAN to the destiny, I will share with you a document of forwarding steps, you can see it bellow:
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=2865
I hope you find this answer useful
“Please rate useful posts so other users can benefit from it”
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Rate Limit Traffic on Router

Is it possible to limit bandwidth between two IPs using ACL or policy map. Like for example i want to limit 50% file sharing traffic coming or going to an IP 172.19.60.50

Hello,
You can rate limit the traffic using Traffic Policing or traffic shapping and YES you can match based on the flow of the traffic
Looking for some Networking Assistance?
Contact me directly at [email protected]
I will fix your problem ASAP.
Cheers,
Julio Carvajal Segura
http://laguiadelnetworking.com

Routing traffice using 2 interfaces

my question is whats the best solution for routing internet traffic out one interface and production, management traffic out another interface. using a cisco ISR 2900

You can use PBR.
Here are 2 documents with examples:
http://www.cisco.com/en/US/docs/ios/12_2/qos/configuration/guide/qcfpbr_ps1835_TSD_Products_Configuration_Guide_Chapter.html
https://supportforums.cisco.com/docs/DOC-1634
HTH

ACE bridge and routed interface in the same context

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:Standardowy;
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
Hello
I am wondering if it is possible to configure one ACE context to support both routed and bridge interface?
I would like to have a bridge-mode context but in the same time I would like to have a separated OOB interface for management.
If it is possible how they could interact to each other?
Thank you in advance for any answer
Regards
Lukasz

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:Standardowy;
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
Hello
We've just tried to configure bridged and routed interfaces at the same time in the lab and we've had a problem.
When we added the def gw for the bridged config we noticed that we had an issue with the traffic src by the rservers in the routed config.
When we deleted the new def gw, the problem disappeared.
I am attaching the lab config.
When we added to it the following line
ip route 0.0.0.0 0.0.0.0 10.1.1.163
reals B1-B10 could not communicate to the outside world.
Do you know why it does not worked and what could we do to fix it ?
Thank you in advance.
Regards
Lukas

3750 qos on routed interface

I have 2 3750G-24 as the core of my voice/data network. I have 2 vlans (voice,data) and it seems like when I cross the routed interfaces (virtual vlanX interfaces) I lose my qos tagging. I have tried route-maps and policy maps but they are not working (the policy maps are not supported on virtual interfaces)
Anyone with a solution?? I have searched cisco.com and unless i am blind, have not found what I am looking for.

Here is the edge switchport config-
End user port-----
interface FastEthernet0/1
switchport access vlan 50
switchport trunk encapsulation dot1q
switchport trunk native vlan 50
switchport mode trunk
switchport voice vlan 10
mls qos trust device cisco-phone
mls qos trust cos
auto qos voip cisco-phone
wrr-queue bandwidth 20 1 80 1
wrr-queue min-reserve 1 5
wrr-queue min-reserve 2 6
wrr-queue min-reserve 3 7
wrr-queue min-reserve 4 8
wrr-queue cos-map 1 0 1 2 4
wrr-queue cos-map 3 3 6 7
wrr-queue cos-map 4 5
priority-queue out
spanning-tree portfast
Gigabit uplink port------------
interface GigabitEthernet0/1
switchport trunk encapsulation dot1q
switchport mode trunk
mls qos trust cos
auto qos voip trust
wrr-queue bandwidth 20 1 80 1
wrr-queue queue-limit 80 1 20 1
wrr-queue cos-map 1 0 1 2 4
wrr-queue cos-map 3 3 6 7
wrr-queue cos-map 4 5
priority-queue out
end
Here is the core switch-
interface GigabitEthernet1/0/24
switchport trunk encapsulation dot1q
switchport mode trunk
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
mls qos trust cos
no mdix auto
auto qos voip trust
end
Core Vlan Interfaces----
interface Vlan1
no ip address
interface Vlan2
description Data Vlan
ip address 10.199.0.29 255.255.252.0
interface Vlan10
description Voice Vlan
ip address 10.199.10.1 255.255.255.0
All of the qos settings are a result of using Auto QoS

Router Interface (7304 NSE100) QoS Input Scheduling

Guys,
I had great feedback on the Switch input scheduling question last week. Many thx to all online (and my colleagues at work) :)
If you can apply input scheduling on a switch port, ie the SP or default queues, can you apply input scheduling on a router interface?
switch
input-q----------PFC----------output-q
router
input-int---------cef-or-rp----------output-int
At the moment, most QoS for a router is done (in my expreience) on outbound scheduling, ie setting a CBWFQ bandwidth or priority and setting this policy-map outbound on the router egress interface
Should we be doing it inbound for traffic coming into a router interface before the packet gets cef switched (or sent to the RP for process or fast switching)?
So if two packets come into the router interface at the same time, based on a DSCP value, we should schedule a voice packet to be processed by CEF switching (or the RP) before an email packet?
I am just applying the switch methodology that I learned about last week to a router device. I know all routers have different archetectures, so will probably be spefific to a platform. I am using NSE100s (PXF based) on a 7304 platform.
Kindest regards,
Ken

Just to add i picked this from some site
GSR:
Engine 0: (Quad STM-1 POS/ATM, single STM-4 POS/ATM and others)
Engine 1: (single GEth, 8 FEth, DPT 2XSTM-4)
Engine 0 and 1 support CAR in sw; MDRR: in Engine 0 in sw
Engine 2: STM-16, Enhanced Quad OC-12/STM-4 Packet-over-SONET/SDH - 4 ports, MPLS-capable -, 8 and 16 STM-1, 3 GEth, Enhanced OC-48/STM-16 Packet-over-SONET/SDH.
no support of CAR, PIRC in hw instead; WRED in hw; MDRR in hw
(See also Quad OC-12/STM-4; Rel. Notes 12.0 S )
Engine 4: speed greater than 2.5 Gbps,
CAR, WRED, MDRR in hw
Note: no class-based shaping on GSR
But it supports DTS
http://www.cisco.com/en/US/products/sw/iosswrel/ps1829/products_feature_guide09186a00800811e5.html
Tuf luck but hope this helps

Bill and Routing Interface concurrent program is not processing component

Hi All,
While running Bill and Routing Interface concurrent program,not processing the component item(Line Item) from bom_inventory_comps_interface,still it show process flag as 1. where as billing item(Header Item) is successfully done..i have tried with all the option by giving component sequence id and batch id still it is not processing component item..
Is it recommendable to give bill sequence id and component sequence id in interface table using bom_inventory_component_s sequence..
I will be very pleased if i listen from u guys... Plz help me in resolving this issue..
My Header Insert Stmt..
INSERT INTO apps.bom_bill_of_mtls_interface@system_link_visma
(assembly_item_id, organization_id,
alternate_bom_designator, last_update_date,
last_updated_by, creation_date, created_by,
revision, item_number, item_description,
implementation_date, transaction_type,
process_flag, assembly_type, batch_id
VALUES (l_inv_item_id, l_org_id,
NULL, SYSDATE,
1318, SYSDATE, 1318,
l_revision, l_item_num, l_description,
SYSDATE, 'CREATE',
1, 1, 10003535
Component Insert stmt
INSERT INTO apps.bom_inventory_comps_interface@system_link_visma
(operation_seq_num, component_item_id,
item_num, basis_type, component_quantity,
auto_request_material, effectivity_date,
disable_date, planning_factor,
component_yield_factor,
enforce_int_requirements,
include_in_cost_rollup, wip_supply_type,
supply_subinventory, supply_locator_id,
check_atp, optional,
mutually_exclusive_options,
low_quantity, high_quantity,
so_basis, shipping_allowed,
include_on_ship_docs, required_to_ship,
required_for_revenue, component_remarks,
transaction_type, process_flag,
assembly_item_id, component_item_number,
batch_id,component_sequence_id
VALUES (l_operation_seq, l_comp_item_id,
cur2.item_sequence, l_basis, cur2.quantity,
l_auto_request_mtls, cur2.from_date,
cur2.TO_DATE, cur2.planning_factor,
cur2.yield_factor,
l_enforce_int_requirements,
l_include_in_cost_rollup, l_supply_type,
l_supply_subinventory, NULL,
l_check_atp, l_optional,
l_mutually_exclusive_options,
cur2.minimum_quantity, cur2.maximum_quantity,
l_sale_order_basis, l_shippable_flag,
l_include_on_ship_docs, l_required_to_ship,
l_required_for_revenue, cur2.comments,
'CREATE', 1,
l_inv_item_id, l_comp_item_num,
10003535,apps.bom_inventory_components_s.nextval@system_link_visma
For Subcomponent Insert Stmt
INSERT INTO apps.bom_sub_comps_interface@system_link_visma
(substitute_component_id,
substitute_item_quantity,
assembly_item_id, component_item_id,
operation_seq_num, organization_id,
substitute_comp_number,
component_item_number,
assembly_item_number,
transaction_type, process_flag,
enforce_int_requirements,
effectivity_date,component_sequence_id,batch_id
VALUES (l_sub_comp_item_id,
cur3.quantity,
l_inv_item_id, l_comp_item_id,
cur2.operation_sequence, l_org_id,
l_sub_comp_item_num,
l_comp_item_num,
l_item_num,
'CREATE', 1,
l_enforce_int_requirements,
SYSDATE,apps.bom_inventory_components_s.currval@system_link_visma,10003535
Thanks
Raman Sharma
Edited by: 929841 on May 4, 2012 12:28 AM
Edited by: 929841 on May 4, 2012 2:58 AM

You need to populate the organization_id or organization_code in bom_inventory_comps_interface.
Here is a minimal insert
INSERT INTO bom.bom_inventory_comps_interface
            (operation_seq_num, last_update_date, last_updated_by,
             creation_date, created_by, process_flag, transaction_type,
             bom_item_type,
             effectivity_date, organization_code, assembly_item_number,
             item_num, component_item_number, component_quantity
     VALUES (1                                                   -- op_seq_num
             ,SYSDATE, 1433
             ,SYSDATE, 1433, 1                                  -- process_flag
             ,'Create',
             4 -- bom_item_type 1 Model; 2 Option class; 3 Planning; 4 Standard; 5 Product family
             ,SYSDATE - 1, 'PUB', 'SSGPARENT1'          -- assembly_item_number
             ,10                                                     --item_num
             , 'SSGCOMP1'                           -- component_item_number
             , 10                                          --qty
            )Sandeep Gandhi

I press reset and now i can't get into router interface?

Yestoday i was just experimenting with my router. I set up a restriction for 12am to 12:05am to see if it will block my sister's internet just for the fun.
However it did not work.
Today my internet was slow because of my sister's laptop. Probably downloading some soft of content. I decide to press the reset button therefore her connection would be taken off.
However now i want to fix that. I understand how to get into my router's interface:
-By going to my computer and then typing 192.168.1.1 on top...
-Yestoday when i did that it worked. I was able to get into router interface, but now i can't. It gives me "cannot find server"
I don't understand why i can't get into my router's set up~
Can this be fixed?

it might be that the reaosn why you're not accessing up the router's set-up page is because the computer connected to it is not getting a valid IP adress already...
to check this...
go to START, then RUN
type in cmd
in the command line, type in ipconfig
take note of your IP adress... that's the computer IP adress..
Now, take note of your default gateway... that is equivalent to your router's IP adress...
in the same window, type in (ping default gateway #) ping 192.168.1.1 . if it replies, then your router's interface should be able to open up
launch internet explorer, then type in http://192.168.1.1
"a helping hand in a community makes the world a universe"

WLC 5508 and Anchor/GuestNet rate limit traffic?

Running WLCs 5508s 7.0.116.0 with GuestNet and Anchor setup, how can I limit the bandwidth on the GuestNet SSDI to 2 Mbps, etc?
The DMZ WLC (Anchor) runs thru a ASA 5508 7x, can I rate limit traffic via ASA?

That's really a matter of preference. This document describes things to keep in mind when altering these QoS profile configurations, FYI.
http://www.cisco.com/en/US/partner/docs/wireless/controller/7.0MR1/configuration/guide/cg_controller_setting.html#wp1254532
It really depends on how many guests, what type of traffic, etc, to make a judgement call as to where you should set these. I'm sorry but I don't have any examples from existing configurations, but hopefully the document explains how to best alter these settings.

Network Routings not imported through "Bill and Routing Interface" program

Hi,
I wanted to import Network routing to Shop Floor Manager hence I am using bom_op_routings_interface and then I am running "Bill and Routing Interface" program. But import program is errored with "You do not have access to items of type standard, so you may not be able to insert, update or delete routings ot this item type".
Highly appreciate if any one clarify why this error is issued by Import program.
Thanks in advance.
Subramanyam.

Please see if the solution in (BOM API Bom_Rtg_Pub.Process_Rtg is not Creating or Updating Maintenance Routings [ID 761976.1]) helps.
Thanks,
Hussein

Extending VLANs across routed interfaces

Hello;
I'm trying to create a L3 core network. The core equipment will be Cisco 3750 enhanced. My idea is make each link between core 3750 a routed interface, with /30 IP addresses.
The problem is the customer needs some VLANs extended across the full enterprise. Is there any way to encapsulate the VLAN inside routed interface?
Thanks in advance.

I realize this thread is 5+ years old, but I feel like commenting anyway.
If you want to encapsulate the vlan across that link, you won't be able to use routed interfaces. You will need to use a layer 2 trunk(dot1q). Therefore, I wouldn't bother with the /30 addresses unless you want to monitor that specific link by IP. In that case, use a special VLAN just for those two interfaces and put your /30 addresses on the vlan interfaces.
If you want fast fail over on a layer 2 link, well then, use Rapid STP. The goal should be to get rid of those flat VLANs that span the core and switch to your original plan of routed interfaces using EIGRP or OSPF.

Can I rate-limit on the sub-interface in cisco asr 1013?

Hi,
I am looking for the command of rate-limit on a sub-interface in cisco asr 1013.
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.2(2)S, RELEASE SOFTWARE (fc1)
IOS XE Version: 03.06.00.S
Please let me know if it is possible in cisco asr 1013. If yes then what are the commands.
Zobair

The ASR no longer supports the rate-limit command, but it does support the same functionality in a QoS policy.
Please find a sample configuration -
ASR1004(config)#policy-map test
ASR1004(config-pmap)#class class-default
ASR1004(config-pmap-c)#shape average 10000
Applying for both ingress and egress : -
ASR1004(config)#int gig1/1/0
ASR1004(config-if)#service-policy output test
or
ASR1004(config-if)#service-policy input test

QOS on 6500 routed interface

All of the QOS configuration guidance I've seen in the documentation on this website refers to 6500 switched interfaces (switchport mode access/trunk).
Is the QOS configuration different on a 6500 routed interface. For instance on an interface between two core switches in a routed (Layer 3) core?
I have already reviewed all of the IOS-related 6500 Cisco documents I could find, and the latest QOS SRND with no luck finding info on this issue.
Thanks
Greg

This URL should help you:
http://www.cisco.com/application/pdf/en/us/guest/products/ps708/c2001/ccmigration_09186a00801a90cc.pdf

"mpls traffic eng passive-interface" mapping on XR

Dears,
ON IOS for TE-InterAS ,the command "mpls traffic-eng passive-interface" is used on InterAS link which isn't running IGP so i am seeking for the equivlent command on XR but i can't find it so please advise what is the equivlent command on XR
Thanks

Hello Amr,
There is no equivalent command on IOS-XR. Are you trying to set up Inter-AS MPLS TE on XR? In IOS-XR, inter-AS tunnels are supported only by using verbatim path-options. Verbatim path-options are supported on both IOS and IOS-XR.
HTH,
Rivalino

Limit traffic on router interface

Similar Messages

Maybe you are looking for