Limited to one display mode with new nvidia drivers
I have a problem with nvidia drivers after 8178
I can get any display mode to work as long as i specify only one mode.
If i enter more modes in my xorg.conf, it will ignore all those modes and revert back to nvidia-auto-select (wich is 1024x768 in my case)
Anyway, i'm not able to change resolutions using xrandr for example. I need this for some applications that require to run in a different display mode ( old windows games i run using wine for example)
When i run X -logverbose 5 it becomes clear that all my monitor's supported modes are in the display pool.
I have also put in gtp generated modelines for all the modes i might need.
I really need a solution to this as i will probably no longer be able to use 8178 when xorg7.1 hits current.
This is what i have in my xorg.conf:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "AlwaysCore"
InputDevice "Mouse1" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/misc/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/cyrillic/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
SubSection "extmod"
# Option "omit xfree86-dga"
EndSubSection
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
Load "bitmap"
Load "ddc"
Load "int10"
Load "record"
# Load "speedo"
Load "vbe"
# Load "xf8_32bpp.so"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "evdev"
# Option "Protocol" "Explorerps/2"
Option "Device" "/dev/input/mx1000"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "11 12"
Option "Dev Name" "Logitech USB Receiver" # cat /proc/bus/input/devices
Option "Dev Phys" "usb-*/input0" # cat /proc/bus/input/devices
Option "Buttons" "12"
Option "Resolution" "800"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "microsoftinet"
Option "XkbLayout" "us"
Option "XkbVariant" ",qwerty"
EndSection
Section "Monitor"
Identifier "Monitor0"
# VendorName "Iiyama"
# ModelName "A901HT"
ModelName "IVM:0119"
HorizSync 27.0 - 115.0
VertRefresh 50.0 - 160.0
# Option "DPMS"
Modeline "1600x1200_100.00" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
Modeline "1600x1200_85.00" 234.76 1600 1720 1896 2192 1200 1201 1204 1260 -HSync +Vsync
Modeline "1600x1200_75.00" 205.99 1600 1720 1896 2192 1200 1201 1204 1253 -HSync +Vsync
Modeline "1600x1200_60.00" 160.96 1600 1704 1880 2160 1200 1201 1204 1242 -HSync +Vsync
Modeline "1280x1024_100.00" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
Modeline "1280x1024_85.00" 159.36 1280 1376 1512 1744 1024 1025 1028 1075 -HSync +Vsync
Modeline "1280x1024_75.00" 138.54 1280 1368 1504 1728 1024 1025 1028 1069 -HSync +Vsync
Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -HSync +Vsync
Modeline "1152x864_100.00" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
Modeline "1152x864_85.00" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
Modeline "1152x864_75.00" 104.99 1152 1224 1352 1552 864 865 868 902 -HSync +Vsync
Modeline "1152x864_60.00" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
Modeline "1024x768_100.00" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
Modeline "1024x768_85.00" 94.39 1024 1088 1200 1376 768 769 772 807 -HSync +Vsync
Modeline "1024x768_75.00" 81.80 1024 1080 1192 1360 768 769 772 802 -HSync +Vsync
Modeline "1024x768_60.00" 64.11 1024 1080 1184 1344 768 769 772 795 -HSync +Vsync
Modeline "800x600_85.00" 56.55 800 840 928 1056 600 601 604 630 -HSync +Vsync
Modeline "800x600_75.00" 48.91 800 840 920 1040 600 601 604 627 -HSync +Vsync
Modeline "800x600_60.00" 38.22 800 832 912 1024 600 601 604 622 -HSync +Vsync
Modeline "640x480_85.00" 35.71 640 672 736 832 480 481 484 505 -HSync +Vsync
Modeline "640x480_75.00" 30.72 640 664 728 816 480 481 484 502 -HSync +Vsync
Modeline "640x480_60.00" 23.86 640 656 720 800 480 481 484 497 -HSync +Vsync
Modeline "320x240_60.00" 5.26 320 304 336 352 240 241 244 249 -HSync +Vsync
Modeline "320x200_60.00" 4.19 320 304 328 336 200 201 204 208 -HSync +Vsync
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NvAGP" "3"
Option "RenderAccel" "TRUE"
Option "NoLogo" "on"
Option "RandRRotation" "TRUE"
# Option "CursorShadow" "FALSE"
# Option "ConnectedMonitor" "CRT"
# Option "UseEDIDFreqs" "FALSE"
# Option "UseEDIDDpi" "FALSE"
# Option "ModeValidation" "NoEdidModes"
# Option "ModeValidation" "AllowNon60HzDFPModes"
# Option "UseEDID" "FALSE"
Option "IgnoreDisplayDevices" "CRT"
Option "DPI" "96 x 96"
Option "Coolbits" "1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 32
Modes "1280x1024"
# Visual StaticGray
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024_85"
# Modes "1280x1024_85 1152x864 1024x768 800x600 640x480 320x240 320x200"
# Visual StaticGray
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024_85"
# Visual StaticGray
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600_75"
# Visual StaticGray
EndSubSection
EndSection
#Section "DRI"
# Mode "0666"
#EndSection
All the EDID specific options i have commented out appeared to be useless.
The following Xorg.0.log was generated using only one mode, resulting in X running in 1280x1024@85hz (logverbose level 5)
[code]
X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.16-ARCH i686
Current Operating System: Linux Orthanc 2.6.17.11 #1 PREEMPT Fri Aug 25 08:31:05 CEST 2006 i686
Build Date: 21 June 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 29 13:57:46 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Mouse1"
(WW) The directory "/usr/share/fonts/local/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/share/fonts/misc/:unscaled,/usr/share/fonts/100dpi/:unscaled,/usr/share/fonts/75dpi/:unscaled,/usr/share/fonts/misc/,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/,/usr/share/fonts/cyrillic/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1"
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2560 card 1043,80b2 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2561 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 1043,8089 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1043,8089 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1043,8089 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1043,8089 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 82 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24cb card 1043,8089 rev 02 class 01,01,8a hdr 00
(II) PCI: 01:00:0: chip 10de,0312 card 1043,80e7 rev a1 class 03,00,00 hdr 00
(II) PCI: 02:05:0: chip 14e4,4401 card 1043,80a8 rev 01 class 02,00,00 hdr 00
(II) PCI: 02:0c:0: chip 105a,4d69 card 105a,4d68 rev 02 class 01,80,85 hdr 00
(II) PCI: 02:0d:0: chip 1102,0004 card 1102,0051 rev 03 class 04,01,00 hdr 80
(II) PCI: 02:0d:1: chip 1102,7003 card 1102,0040 rev 03 class 09,80,00 hdr 80
(II) PCI: 02:0d:2: chip 1102,4001 card 1102,0010 rev 00 class 0c,00,10 hdr 80
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xde000000 - 0xdfdfffff (0x1e00000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xdff00000 - 0xefffffff (0x10100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B]
[4] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[5] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[6] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[7] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
[8] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[9] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[10] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[11] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xdb800000 - 0xdd7fffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xdfe00000 - 0xdfefffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV31 [GeForce FX 5600] rev 161, Mem @ 0xde000000/24, 0xe0000000/28, BIOS @ 0xdffe0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xefffffff
(II) Active PCI resource ranges:
[0] -1 0 0xdb800000 - 0xdb803fff (0x4000) MX[B]
[1] -1 0 0xdc000000 - 0xdc0007ff (0x800) MX[B]
[2] -1 0 0xdfe00000 - 0xdfe03fff (0x4000) MX[B]
[3] -1 0 0xdc800000 - 0xdc803fff (0x4000) MX[B]
[4] -1 0 0xdd000000 - 0xdd001fff (0x2000) MX[B]
[5] -1 0 0x30000000 - 0x300003ff (0x400) MX[B]
[6] -1 0 0xdd800000 - 0xdd8003ff (0x400) MX[B]
[7] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[8] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B)
[9] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[10] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[11] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[12] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[13] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B]
[14] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
[15] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[16] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B]
[17] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B]
[18] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[19] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[20] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdb800000 - 0xdb803fff (0x4000) MX[B]
[1] -1 0 0xdc000000 - 0xdc0007ff (0x800) MX[B]
[2] -1 0 0xdfe00000 - 0xdfe03fff (0x4000) MX[B]
[3] -1 0 0xdc800000 - 0xdc803fff (0x4000) MX[B]
[4] -1 0 0xdd000000 - 0xdd001fff (0x2000) MX[B]
[5] -1 0 0x30000000 - 0x300003ff (0x400) MX[B]
[6] -1 0 0xdd800000 - 0xdd8003ff (0x400) MX[B]
[7] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[8] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B)
[9] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[10] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[11] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[12] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[13] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B]
[14] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
[15] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[16] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B]
[17] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B]
[18] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[19] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[20] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdb800000 - 0xdb803fff (0x4000) MX[B]
[6] -1 0 0xdc000000 - 0xdc0007ff (0x800) MX[B]
[7] -1 0 0xdfe00000 - 0xdfe03fff (0x4000) MX[B]
[8] -1 0 0xdc800000 - 0xdc803fff (0x4000) MX[B]
[9] -1 0 0xdd000000 - 0xdd001fff (0x2000) MX[B]
[10] -1 0 0x30000000 - 0x300003ff (0x400) MX[B]
[11] -1 0 0xdd800000 - 0xdd8003ff (0x400) MX[B]
[12] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[13] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B)
[14] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[15] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[19] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[20] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B]
[21] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
[22] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[23] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B]
[24] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B]
[25] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[26] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[27] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[28] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Reloading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.0.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.8774
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.8774
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 0.0.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.4
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) NVIDIA dlloader X Driver 1.0-8774 Tue Aug 1 20:55:35 PDT 2006
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Found 1 NVIDIA X Screens
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdb800000 - 0xdb803fff (0x4000) MX[B]
[6] -1 0 0xdc000000 - 0xdc0007ff (0x800) MX[B]
[7] -1 0 0xdfe00000 - 0xdfe03fff (0x4000) MX[B]
[8] -1 0 0xdc800000 - 0xdc803fff (0x4000) MX[B]
[9] -1 0 0xdd000000 - 0xdd001fff (0x2000) MX[B]
[10] -1 0 0x30000000 - 0x300003ff (0x400) MX[B]
[11] -1 0 0xdd800000 - 0xdd8003ff (0x400) MX[B]
[12] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[13] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B)
[14] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[15] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[19] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[20] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B]
[21] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
[22] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[23] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B]
[24] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B]
[25] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[26] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[27] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[28] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdb800000 - 0xdb803fff (0x4000) MX[B]
[6] -1 0 0xdc000000 - 0xdc0007ff (0x800) MX[B]
[7] -1 0 0xdfe00000 - 0xdfe03fff (0x4000) MX[B]
[8] -1 0 0xdc800000 - 0xdc803fff (0x4000) MX[B]
[9] -1 0 0xdd000000 - 0xdd001fff (0x2000) MX[B]
[10] -1 0 0x30000000 - 0x300003ff (0x400) MX[B]
[11] -1 0 0xdd800000 - 0xdd8003ff (0x400) MX[B]
[12] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[13] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B)
[14] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[15] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[22] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[23] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B]
[24] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
[25] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[26] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B]
[27] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B]
[28] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[29] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[30] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[31] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "on"
(**) NVIDIA(0): Option "NvAGP" "3"
(**) NVIDIA(0): Option "RenderAccel" "TRUE"
(**) NVIDIA(0): Option "RandRRotation" "TRUE"
(**) NVIDIA(0): Option "Coolbits" "1"
(**) NVIDIA(0): Option "DPI" "96 x 96"
(==) NVIDIA(0): Using HW cursor
(**) NVIDIA(0): Enabling RENDER acceleration
(==) NVIDIA(0): Video key set to default value of 0x101fe
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5600 at PCI:1:0:0
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(II) NVIDIA(0): GPU Architecture: 0x30
(II) NVIDIA(0): GPU Implementation: 0x31
(II) NVIDIA(0): GPU Revision: 0xa1
(--) NVIDIA(0): VideoBIOS: 04.31.20.28.00
(--) NVIDIA(0): Found 2 CRTCs on board
(II) NVIDIA(0): Supported display device(s): CRT-0, CRT-1, DFP-0, DFP-1, TV-0
(II) NVIDIA(0): Bus detected as AGP
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0):
(II) NVIDIA(0): Mode timing constraints for : GeForce FX 5600
(II) NVIDIA(0): Maximum mode timing values :
(II) NVIDIA(0): Horizontal Visible Width : 8192
(II) NVIDIA(0): Horizontal Blank Start : 8192
(II) NVIDIA(0): Horizontal Blank Width : 4096
(II) NVIDIA(0): Horizontal Sync Start : 8184
(II) NVIDIA(0): Horizontal Sync Width : 504
(II) NVIDIA(0): Horizontal Total Width : 8224
(II) NVIDIA(0): Vertical Visible Height : 8192
(II) NVIDIA(0): Vertical Blank Start : 8192
(II) NVIDIA(0): Vertical Blank Width : 256
(II) NVIDIA(0): Veritcal Sync Start : 8191
(II) NVIDIA(0): Vertical Sync Width : 15
(II) NVIDIA(0): Vertical Total Height : 8193
(II) NVIDIA(0):
(II) NVIDIA(0): Minimum mode timing values :
(II) NVIDIA(0): Horizontal Total Width : 40
(II) NVIDIA(0): Vertical Total Height : 2
(II) NVIDIA(0):
(II) NVIDIA(0): Mode timing alignment :
(II) NVIDIA(0): Horizontal Visible Width : multiples of 8
(II) NVIDIA(0): Horizontal Blank Start : multiples of 8
(II) NVIDIA(0): Horizontal Blank Width : multiples of 8
(II) NVIDIA(0): Horizontal Sync Start : multiples of 8
(II) NVIDIA(0): Horizontal Sync Width : multiples of 8
(II) NVIDIA(0): Horizontal Total Width : multiples of 8
(II) NVIDIA(0):
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5600 at PCI:1:0:0:
(--) NVIDIA(0): Iiyama (CRT-0)
(--) NVIDIA(0): Iiyama (CRT-0): 350.0 MHz maximum pixel clock
(--) NVIDIA(0):
(--) NVIDIA(0): --- EDID for Iiyama (CRT-0) ---
(--) NVIDIA(0): EDID Version : 1.1
(--) NVIDIA(0): Manufacturer : IVM
(--) NVIDIA(0): Monitor Name : Iiyama
(--) NVIDIA(0): Product ID : 6401
(--) NVIDIA(0): 32-bit Serial Number : 0
(--) NVIDIA(0): Serial Number String :
(--) NVIDIA(0): Manufacture Date : 2000, week 30
(--) NVIDIA(0): DPMS Capabilities : Standby Suspend Active Off
(--) NVIDIA(0): Prefer first detailed timing : No
(--) NVIDIA(0): Supports GTF : No
(--) NVIDIA(0): Maximum Image Size : 360mm x 270mm
(--) NVIDIA(0): Valid HSync Range : 31 kHz - 106 kHz
(--) NVIDIA(0): Valid VRefresh Range : 56 Hz - 85 Hz
(--) NVIDIA(0): EDID maximum pixel clock : 229.5 MHz
(--) NVIDIA(0):
(--) NVIDIA(0): Established Timings:
(--) NVIDIA(0): 640 x 480 @ 60 Hz
(--) NVIDIA(0): 640 x 480 @ 72 Hz
(--) NVIDIA(0): 640 x 480 @ 75 Hz
(--) NVIDIA(0): 800 x 600 @ 56 Hz
(--) NVIDIA(0): 800 x 600 @ 60 Hz
(--) NVIDIA(0): 800 x 600 @ 72 Hz
(--) NVIDIA(0): 800 x 600 @ 75 Hz
(--) NVIDIA(0): 1024 x 768 @ 60 Hz
(--) NVIDIA(0): 1024 x 768 @ 70 Hz
(--) NVIDIA(0): 1024 x 768 @ 75 Hz
(--) NVIDIA(0): 1280 x 1024 @ 75 Hz
(--) NVIDIA(0):
(--) NVIDIA(0): Standard Timings:
(--) NVIDIA(0): 1600 x 1200 @ 60 Hz
(--) NVIDIA(0): 1600 x 1200 @ 70 Hz
(--) NVIDIA(0): 1600 x 1200 @ 75 Hz
(--) NVIDIA(0): 1600 x 1200 @ 85 Hz
(--) NVIDIA(0):
(--) NVIDIA(0): --- End of EDID for Iiyama (CRT-0) ---
(--) NVIDIA(0):
(II) NVIDIA(0): Frequency information for Iiyama (CRT-0):
(II) NVIDIA(0): HorizSync : 31.000-106.000 kHz
(II) NVIDIA(0): VertRefresh : 56.000-85.000 Hz
(II) NVIDIA(0): (HorizSync from EDID)
(II) NVIDIA(0): (VertRefresh from EDID)
(II) NVIDIA(0):
(II) NVIDIA(0): --- Modes in ModePool for Iiyama (CRT-0) ---
(II) NVIDIA(0): "nvidia-auto-select" : 1024 x 768 @ 85.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1920x1200" : 1920 x 1200 @ 70.0 Hz (from: X Server)
(II) NVIDIA(0): "1920x1200_70" : 1920 x 1200 @ 70.0 Hz (from: X Server)
(II) NVIDIA(0): "1920x1200_60" : 1920 x 1200 @ 60.0 Hz (from: X Server)
(II) NVIDIA(0): "1856x1392" : 1856 x 1392 @ 60.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "1856x1392_60" : 1856 x 1392 @ 60.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "1792x1344" : 1792 x 1344 @ 60.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "1792x1344_60" : 1792 x 1344 @ 60.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "1680x1050" : 1680 x 1050 @ 85.0 Hz (from: X Server)
(II) NVIDIA(0): "1680x1050_85" : 1680 x 1050 @ 85.0 Hz (from: X Server)
(II) NVIDIA(0): "1680x1050_75" : 1680 x 1050 @ 75.0 Hz (from: X Server)
(II) NVIDIA(0): "1680x1050_70" : 1680 x 1050 @ 70.0 Hz (from: X Server)
(II) NVIDIA(0): "1680x1050_60" : 1680 x 1050 @ 60.0 Hz (from: X Server)
(II) NVIDIA(0): "1600x1200" : 1600 x 1200 @ 85.0 Hz (from: X Server, VESA, EDID)
(II) NVIDIA(0): "1600x1200_85" : 1600 x 1200 @ 85.0 Hz (from: X Server, VESA, EDID)
(II) NVIDIA(0): "1600x1200_75" : 1600 x 1200 @ 75.0 Hz (from: X Server, VESA, EDID)
(II) NVIDIA(0): "1600x1200_70" : 1600 x 1200 @ 70.0 Hz (from: X Server, VESA, EDID)
(II) NVIDIA(0): "1600x1200_65" : 1600 x 1200 @ 65.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "1600x1200_60" : 1600 x 1200 @ 60.0 Hz (from: X Server, VESA, EDID)
(II) NVIDIA(0): "1600x1024" : 1600 x 1024 @ 60.0 Hz (from: X Server)
(II) NVIDIA(0): "1600x1024_60" : 1600 x 1024 @ 60.0 Hz (from: X Server)
(II) NVIDIA(0): "1400x1050" : 1400 x 1050 @ 85.3 Hz (from: X Server)
(II) NVIDIA(0): "1400x1050_85" : 1400 x 1050 @ 85.3 Hz (from: X Server)
(II) NVIDIA(0): "1400x1050_85_0" : 1400 x 1050 @ 85.0 Hz (from: X Server)
(II) NVIDIA(0): "1400x1050_75" : 1400 x 1050 @ 74.8 Hz (from: X Server)
(II) NVIDIA(0): "1400x1050_70" : 1400 x 1050 @ 70.0 Hz (from: X Server)
(II) NVIDIA(0): "1400x1050_70_0" : 1400 x 1050 @ 70.0 Hz (from: X Server)
(II) NVIDIA(0): "1400x1050_60" : 1400 x 1050 @ 60.0 Hz (from: X Server)
(II) NVIDIA(0): "1280x1024" : 1280 x 1024 @ 85.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "1280x1024_85.00" : 1280 x 1024 @ 85.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1280x1024_75.00" : 1280 x 1024 @ 75.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1280x1024_60.00" : 1280 x 1024 @ 60.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1280x1024_85_0" : 1280 x 1024 @ 85.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "1280x1024_85" : 1280 x 1024 @ 85.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1280x1024_75" : 1280 x 1024 @ 75.0 Hz (from: X Server, VESA, EDID)
(II) NVIDIA(0): "1280x1024_75_0" : 1280 x 1024 @ 75.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1280x1024_60_0" : 1280 x 1024 @ 60.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "1280x1024_60" : 1280 x 1024 @ 60.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1280x960" : 1280 x 960 @ 85.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "1280x960_85" : 1280 x 960 @ 85.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "1280x960_60" : 1280 x 960 @ 60.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "1280x800" : 1280 x 800 @ 85.0 Hz (from: X Server)
(II) NVIDIA(0): "1280x800_85" : 1280 x 800 @ 85.0 Hz (from: X Server)
(II) NVIDIA(0): "1280x800_75" : 1280 x 800 @ 75.0 Hz (from: X Server)
(II) NVIDIA(0): "1280x800_70" : 1280 x 800 @ 70.0 Hz (from: X Server)
(II) NVIDIA(0): "1280x800d60" : 1280 x 800 @ 60.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "1280x800_60" : 1280 x 800 @ 60.0 Hz (from: X Server)
(II) NVIDIA(0): "1280x768" : 1280 x 768 @ 85.0 Hz (from: X Server)
(II) NVIDIA(0): "1280x768_85" : 1280 x 768 @ 85.0 Hz (from: X Server)
(II) NVIDIA(0): "1280x768_75" : 1280 x 768 @ 75.0 Hz (from: X Server)
(II) NVIDIA(0): "1280x768_70" : 1280 x 768 @ 70.0 Hz (from: X Server)
(II) NVIDIA(0): "1280x768_60" : 1280 x 768 @ 60.0 Hz (from: X Server)
(II) NVIDIA(0): "1280x720" : 1280 x 720 @ 85.0 Hz (from: X Server)
(II) NVIDIA(0): "1280x720_85" : 1280 x 720 @ 85.0 Hz (from: X Server)
(II) NVIDIA(0): "1280x720_75" : 1280 x 720 @ 75.0 Hz (from: X Server)
(II) NVIDIA(0): "1280x720_70" : 1280 x 720 @ 70.0 Hz (from: X Server)
(II) NVIDIA(0): "1280x720_60" : 1280 x 720 @ 60.0 Hz (from: X Server)
(II) NVIDIA(0): "1152x864" : 1152 x 864 @ 85.1 Hz (from: X Server)
(II) NVIDIA(0): "1152x864_85.00" : 1152 x 864 @ 85.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1152x864_75.00" : 1152 x 864 @ 75.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1152x864_60.00" : 1152 x 864 @ 60.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1152x864_85_0" : 1152 x 864 @ 85.1 Hz (from: X Server)
(II) NVIDIA(0): "1152x864_85" : 1152 x 864 @ 85.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1152x864_85_1" : 1152 x 864 @ 85.0 Hz (from: X Server)
(II) NVIDIA(0): "1152x864_75_0" : 1152 x 864 @ 75.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "1152x864_75" : 1152 x 864 @ 75.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1152x864_75_1" : 1152 x 864 @ 75.0 Hz (from: X Server)
(II) NVIDIA(0): "1152x864_70" : 1152 x 864 @ 70.0 Hz (from: X Server)
(II) NVIDIA(0): "1152x864_60" : 1152 x 864 @ 60.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1152x864_60_0" : 1152 x 864 @ 60.0 Hz (from: X Server)
(II) NVIDIA(0): "1024x768_85.00" : 1024 x 768 @ 85.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1024x768" : 1024 x 768 @ 85.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "1024x768_75.00" : 1024 x 768 @ 75.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1024x768_60.00" : 1024 x 768 @ 60.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1024x768_85" : 1024 x 768 @ 85.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1024x768_85_0" : 1024 x 768 @ 85.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "1024x768_75_1" : 1024 x 768 @ 75.1 Hz (from: X Server, VESA)
(II) NVIDIA(0): "1024x768_75" : 1024 x 768 @ 75.0 Hz (from: EDID)
(II) NVIDIA(0): "1024x768_75_0" : 1024 x 768 @ 75.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "1024x768_70" : 1024 x 768 @ 70.1 Hz (from: X Server, VESA, EDID)
(II) NVIDIA(0): "1024x768d60" : 1024 x 768 @ 60.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA, EDID)
(II) NVIDIA(0): "1024x768_60_0" : 1024 x 768 @ 60.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "960x720" : 960 x 720 @ 60.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "960x720d60" : 960 x 720 @ 60.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "960x600" : 960 x 600 @ 75.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "960x600d75" : 960 x 600 @ 75.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "960x600d73" : 960 x 600 @ 72.8 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "960x600d70" : 960 x 600 @ 70.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "960x600d60" : 960 x 600 @ 60.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "928x696" : 928 x 696 @ 60.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "928x696d60" : 928 x 696 @ 60.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "896x672" : 896 x 672 @ 75.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "896x672d75" : 896 x 672 @ 75.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "896x672d60" : 896 x 672 @ 60.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "848x480" : 848 x 480 @ 85.0 Hz (from: X Server)
(II) NVIDIA(0): "848x480_85" : 848 x 480 @ 85.0 Hz (from: X Server)
(II) NVIDIA(0): "848x480_75" : 848 x 480 @ 75.0 Hz (from: X Server)
(II) NVIDIA(0): "848x480_70" : 848 x 480 @ 70.0 Hz (from: X Server)
(II) NVIDIA(0): "840x525" : 840 x 525 @ 85.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "840x525d85" : 840 x 525 @ 85.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "840x525d75" : 840 x 525 @ 75.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "840x525d70" : 840 x 525 @ 70.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "840x525d60" : 840 x 525 @ 60.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "832x624" : 832 x 624 @ 74.5 Hz (from: X Server)
(II) NVIDIA(0): "832x624_75" : 832 x 624 @ 74.5 Hz (from: X Server)
(II) NVIDIA(0): "800x600" : 800 x 600 @ 85.1 Hz (from: X Server, VESA)
(II) NVIDIA(0): "800x600_85.00" : 800 x 600 @ 85.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "800x600_75.00" : 800 x 600 @ 75.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "800x600_60.00" : 800 x 600 @ 60.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "800x600_85_0" : 800 x 600 @ 85.1 Hz (from: X Server, VESA)
(II) NVIDIA(0): "800x600_85" : 800 x 600 @ 85.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "800x600d85" : 800 x 600 @ 85.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "800x600_75_0" : 800 x 600 @ 75.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "800x600_75" : 800 x 600 @ 75.0 Hz (from: X Server, VESA, EDID)
(II) NVIDIA(0): "800x600d75" : 800 x 600 @ 75.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA, EDID)
(II) NVIDIA(0): "800x600d70" : 800 x 600 @ 70.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "800x600d65" : 800 x 600 @ 65.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA, EDID)
(II) NVIDIA(0): "800x600_60_0" : 800 x 600 @ 60.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "800x600d60" : 800 x 600 @ 60.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA, EDID)
(II) NVIDIA(0): "800x512" : 800 x 512 @ 60.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "800x512d60" : 800 x 512 @ 60.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "720x400" : 720 x 400 @ 85.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "720x400_85" : 720 x 400 @ 85.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "700x525" : 700 x 525 @ 85.3 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "700x525d85" : 700 x 525 @ 85.3 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "700x525d85_0" : 700 x 525 @ 85.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "700x525d75" : 700 x 525 @ 74.8 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "700x525d70_0" : 700 x 525 @ 70.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "700x525d70" : 700 x 525 @ 70.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "700x525d60" : 700 x 525 @ 60.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x512" : 640 x 512 @ 85.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x512d85" : 640 x 512 @ 85.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x512d75" : 640 x 512 @ 75.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x512d60" : 640 x 512 @ 60.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x480" : 640 x 480 @ 85.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x480_85.00" : 640 x 480 @ 85.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "640x480_75.00" : 640 x 480 @ 75.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "640x480d85" : 640 x 480 @ 85.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x480_85_0" : 640 x 480 @ 85.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "640x480_85" : 640 x 480 @ 85.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "640x480_75" : 640 x 480 @ 75.0 Hz (from: X Server, VESA, EDID)
(II) NVIDIA(0): "640x480_75_0" : 640 x 480 @ 75.0 Hz (from: Custom ModeLine)
(II) NVIDIA(0): "640x480_73" : 640 x 480 @ 72.8 Hz (from: EDID)
(II) NVIDIA(0): "640x480_73_0" : 640 x 480 @ 72.8 Hz (from: X Server, VESA)
(II) NVIDIA(0): "640x480d60" : 640 x 480 @ 60.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x480_60_0" : 640 x 480 @ 60.0 Hz (from: X Server, VESA)
(II) NVIDIA(0): "640x480_60" : 640 x 480 @ 60.0 Hz (from: EDID)
(II) NVIDIA(0): "640x400" : 640 x 400 @ 85.1 Hz (from: X Server, VESA)
(II) NVIDIA(0): "640x400_85" : 640 x 400 @ 85.1 Hz (from: X Server, VESA)
(II) NVIDIA(0): "640x400d85" : 640 x 400 @ 85.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x400d75" : 640 x 400 @ 75.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x400d70" : 640 x 400 @ 70.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x400d60" : 640 x 400 @ 60.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x384" : 640 x 384 @ 85.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x384d85" : 640 x 384 @ 85.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x384d75" : 640 x 384 @ 75.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x384d70" : 640 x 384 @ 70.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x384d60" : 640 x 384 @ 60.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x360" : 640 x 360 @ 85.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x360d85" : 640 x 360 @ 85.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x360d75" : 640 x 360 @ 75.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x360d70" : 640 x 360 @ 70.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x360d60" : 640 x 360 @ 60.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "640x350" : 640 x 350 @ 85.1 Hz (from: X Server, VESA)
(II) NVIDIA(0): "640x350_85" : 640 x 350 @ 85.1 Hz (from: X Server, VESA)
(II) NVIDIA(0): "576x432" : 576 x 432 @ 85.2 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "576x432d85" : 576 x 432 @ 85.2 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "576x432d85_0" : 576 x 432 @ 85.1 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "576x432d75" : 576 x 432 @ 75.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0): "576x432d75_0" : 576 x 432 @ 75.0 Hz DoubleScan (from: X Server)
(II) NVIDIA(0
It turns out it won't do any lower than 640x480. These are my changes:
Modeline "800x600_85.00" 56.55 800 840 928 1056 600 601 604 630 -HSync +Vsync DoubleScan
Modeline "800x600_75.00" 48.91 800 840 920 1040 600 601 604 627 -HSync +Vsync DoubleScan
Modeline "800x600_60.00" 38.22 800 832 912 1024 600 601 604 622 -HSync +Vsync DoubleScan
Modeline "640x480_85.00" 35.71 640 672 736 832 480 481 484 505 -HSync +Vsync DoubleScan
Modeline "640x480_75.00" 30.72 640 664 728 816 480 481 484 502 -HSync +Vsync DoubleScan
Modeline "640x480_60.00" 23.86 640 656 720 800 480 481 484 497 -HSync +Vsync DoubleScan
Modeline "320x240_60.00" 5.26 320 304 336 352 240 241 244 249 -HSync +Vsync DoubleScan
Modeline "320x200_60.00" 4.19 320 304 328 336 200 201 204 208 -HSync +Vsync DoubleScan
and
Modes "1280x1024_85" "1280x1024_75" "1280x1024_60" "1152x864_85" "1152x864_75" "1152x864_60" "1024x768_85" "1024x768_75" "1024x768_60" "800x600_75" "800x600_60" "640x480_75" "640x480_60" "320x240_60" "320x200_60"
I'm not sure if i did that doublescan thingy right, but it gets completely ignored.
Similar Messages
-
JRE 1.3.1_02 does not work with new Nvidia drivers - HELP!
I am a user and not a developer but this problem really does bite the big one. I have had installed JRE 1.3.1 and have used it to run LimeWire file sharing program for a long time (LimeWire is a java program from www.limewire.com) and also use it to see java applets on web pages in IE 6.
I have since upgraded my Nvidia video drivers to version 2.8.3.2 which is the latest official release at this time from Nvidia. Since doing this I have no java at all anymore. Limewire refuses to run at all and there is an error report generated in it's resident directory. If I go to http://java.sun.com, IE hangs and then dissappears, leaving a bug report on my desktop. It seems that JRE does not like the new NT OpenGL dll at all in the new Nvidia drivers and will not run at all. The dll that causes the problem is:
C:\WINDOWS\System32\nvoglnt.dll
I upgraded JRE to version 1.3.1_02 because Sun says this is the latest version and runs on XP which is what I have. Still java does not run at all anymore and I get the same bug reports. Has anyone found a workaround for this problem? This really stinks because now I cannot use LimeWire at all and if any web page has java on it, it dissappears right away and there is no more browser on my desktop. The only way I can even visit http://java.sun.com is if I use a Java blocking applet to filter out java applets on web pages.
Please address this issue in JRE development and release a patch for it or a workaround.
Thank you for reading this.
[email protected]
System Info:
Microsoft Windows XP Professional
Sun JRE 1.3.1_02
GeForce 2 MX AGP video card with 32Mb VRAM
Intel Pentuim III 800Mhz Coppermine
1Gb PC 133Mhz SDRAM
Java generated bug report:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x69564306
Function name=(N/A)
Library=C:\WINDOWS\System32\nvoglnt.dll
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
at sun.awt.Win32GraphicsDevice.getDefaultPixID(Native Method)
at sun.awt.Win32GraphicsDevice.getDefaultConfiguration(Unknown Source)
at sun.awt.windows.WToolkit.resetGC(Unknown Source)
at sun.awt.windows.WToolkit.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.Toolkit$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Unknown Source)
at sun.awt.GlobalCursorManager$CursorEvent.<init>(Unknown Source)
at sun.awt.GlobalCursorManager.<clinit>(Unknown Source)
at java.awt.Cursor.initIDs(Native Method)
at java.awt.Cursor.<clinit>(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at javax.swing.JFrame.<init>(Unknown Source)
at sun.plugin.ConsoleWindow.<init>(Unknown Source)
at sun.plugin.JavaRunTime.getJavaConsole(Unknown Source)
at sun.plugin.JavaRunTime.showJavaConsole(Unknown Source)
at sun.plugin.AppletViewer.initEnvironment(Unknown Source)
Dynamic libraries:
0x00400000 - 0x00419000 C:\Program Files\Internet Explorer\iexplore.exe
0x77F50000 - 0x77FF9000 C:\WINDOWS\System32\ntdll.dll
0x77E60000 - 0x77F45000 C:\WINDOWS\system32\kernel32.dll
0x77C10000 - 0x77C63000 C:\WINDOWS\system32\msvcrt.dll
0x77D40000 - 0x77DCD000 C:\WINDOWS\system32\USER32.dll
0x77C70000 - 0x77CB0000 C:\WINDOWS\system32\GDI32.dll
0x77DD0000 - 0x77E5B000 C:\WINDOWS\system32\ADVAPI32.dll
0x77CC0000 - 0x77D35000 C:\WINDOWS\system32\RPCRT4.dll
0x772D0000 - 0x77333000 C:\WINDOWS\system32\SHLWAPI.dll
0x71700000 - 0x71848000 C:\WINDOWS\System32\SHDOCVW.dll
0x71950000 - 0x71A34000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.0.0_x-ww_1382d70a\comctl32.dll
0x773D0000 - 0x77BC4000 C:\WINDOWS\system32\SHELL32.dll
0x77340000 - 0x773CB000 C:\WINDOWS\system32\comctl32.dll
0x771B0000 - 0x772CA000 C:\WINDOWS\system32\ole32.dll
0x5AD70000 - 0x5ADA4000 C:\WINDOWS\system32\uxtheme.dll
0x60000000 - 0x6004C000 C:\WINDOWS\System32\MSCTF.dll
0x75F80000 - 0x7607C000 C:\WINDOWS\System32\BROWSEUI.dll
0x72430000 - 0x72442000 C:\WINDOWS\System32\browselc.dll
0x75F40000 - 0x75F5D000 C:\WINDOWS\system32\appHelp.dll
0x76FD0000 - 0x77048000 C:\WINDOWS\System32\CLBCATQ.DLL
0x77120000 - 0x771AB000 C:\WINDOWS\system32\OLEAUT32.dll
0x77050000 - 0x77115000 C:\WINDOWS\System32\COMRes.dll
0x77C00000 - 0x77C07000 C:\WINDOWS\system32\VERSION.dll
0x63000000 - 0x63094000 C:\WINDOWS\system32\WININET.dll
0x762C0000 - 0x7634A000 C:\WINDOWS\system32\CRYPT32.dll
0x762A0000 - 0x762AF000 C:\WINDOWS\system32\MSASN1.dll
0x76F90000 - 0x76FA0000 C:\WINDOWS\System32\Secur32.dll
0x76620000 - 0x7666E000 C:\WINDOWS\System32\cscui.dll
0x76600000 - 0x7661B000 C:\WINDOWS\System32\CSCDLL.dll
0x76670000 - 0x76754000 C:\WINDOWS\System32\SETUPAPI.dll
0x75A70000 - 0x75B13000 C:\WINDOWS\system32\USERENV.dll
0x10000000 - 0x10008000 C:\Program Files\Adobe\Acrobat 5.0\Reader\ActiveX\AcroIEHelper.ocx
0x75E90000 - 0x75F31000 C:\WINDOWS\System32\SXS.DLL
0x1A400000 - 0x1A479000 C:\WINDOWS\system32\urlmon.dll
0x63580000 - 0x63824000 C:\WINDOWS\System32\mshtml.dll
0x01500000 - 0x01588000 C:\WINDOWS\System32\shdoclc.dll
0x74770000 - 0x747FF000 C:\WINDOWS\System32\MLANG.dll
0x76400000 - 0x765FB000 C:\WINDOWS\System32\msi.dll
0x746F0000 - 0x74719000 C:\WINDOWS\System32\msimtf.dll
0x605D0000 - 0x605DF000 C:\WINDOWS\System32\mslbui.dll
0x5C2C0000 - 0x5C303000 C:\WINDOWS\ime\sptip.dll
0x018D0000 - 0x0192B000 C:\Program Files\Common Files\Microsoft Shared\Ink\SKCHUI.DLL
0x746C0000 - 0x746E7000 C:\WINDOWS\System32\MSLS31.DLL
0x32520000 - 0x32532000 C:\Program Files\Microsoft Office\Office10\msohev.dll
0x1C000000 - 0x1C009000 C:\Program Files\AIM95\idlemon.dll
0x71C20000 - 0x71C6F000 C:\WINDOWS\System32\netapi32.dll
0x71B20000 - 0x71B31000 C:\WINDOWS\system32\MPR.dll
0x75F60000 - 0x75F66000 C:\WINDOWS\System32\drprov.dll
0x71C10000 - 0x71C1D000 C:\WINDOWS\System32\ntlanman.dll
0x71CD0000 - 0x71CE6000 C:\WINDOWS\System32\NETUI0.dll
0x71C90000 - 0x71CCC000 C:\WINDOWS\System32\NETUI1.dll
0x71C80000 - 0x71C86000 C:\WINDOWS\System32\NETRAP.dll
0x71BF0000 - 0x71C01000 C:\WINDOWS\System32\SAMLIB.dll
0x75F70000 - 0x75F79000 C:\WINDOWS\System32\davclnt.dll
0x73D70000 - 0x73D82000 C:\WINDOWS\System32\shgina.dll
0x75970000 - 0x75A61000 C:\WINDOWS\System32\MSGINA.dll
0x76360000 - 0x7636F000 C:\WINDOWS\System32\WINSTA.dll
0x1F7B0000 - 0x1F7E1000 C:\WINDOWS\System32\ODBC32.dll
0x763B0000 - 0x763F5000 C:\WINDOWS\system32\comdlg32.dll
0x1F850000 - 0x1F866000 C:\WINDOWS\System32\odbcint.dll
0x5A500000 - 0x5A58D000 C:\WINDOWS\System32\wiashext.dll
0x70D00000 - 0x70EA0000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.GdiPlus_6595b64144ccf1df_1.0.0.0_x-ww_8d353f13\gdiplus.dll
0x73BA0000 - 0x73BB2000 C:\WINDOWS\System32\sti.dll
0x74AE0000 - 0x74AE7000 C:\WINDOWS\System32\CFGMGR32.dll
0x71AD0000 - 0x71AD8000 C:\WINDOWS\System32\wsock32.dll
0x71AB0000 - 0x71AC5000 C:\WINDOWS\System32\WS2_32.dll
0x71AA0000 - 0x71AA8000 C:\WINDOWS\System32\WS2HELP.dll
0x71A50000 - 0x71A8B000 C:\WINDOWS\system32\mswsock.dll
0x71A90000 - 0x71A98000 C:\WINDOWS\System32\wshtcpip.dll
0x76EE0000 - 0x76F17000 C:\WINDOWS\System32\RASAPI32.DLL
0x76E90000 - 0x76EA1000 C:\WINDOWS\System32\rasman.dll
0x76EB0000 - 0x76EDA000 C:\WINDOWS\System32\TAPI32.dll
0x76E80000 - 0x76E8D000 C:\WINDOWS\System32\rtutils.dll
0x76B40000 - 0x76B6C000 C:\WINDOWS\System32\WINMM.dll
0x722B0000 - 0x722B5000 C:\WINDOWS\System32\sensapi.dll
0x76F20000 - 0x76F45000 C:\WINDOWS\System32\DNSAPI.dll
0x76FB0000 - 0x76FB7000 C:\WINDOWS\System32\winrnr.dll
0x76F60000 - 0x76F8C000 C:\WINDOWS\system32\WLDAP32.dll
0x76FC0000 - 0x76FC5000 C:\WINDOWS\System32\rasadhlp.dll
0x6D370000 - 0x6D37D000 C:\Program Files\JavaSoft\JRE\1.3.1_02\bin\npjava131_02.dll
0x6D130000 - 0x6D15A000 C:\Program Files\JavaSoft\JRE\1.3.1_02\bin\beans.ocx
0x6D300000 - 0x6D316000 C:\Program Files\JavaSoft\JRE\1.3.1_02\bin\jpishare.dll
0x6D420000 - 0x6D4F0000 C:\PROGRA~1\JavaSoft\JRE\132DB1~1.1_0\bin\hotspot\jvm.dll
0x6D220000 - 0x6D227000 C:\PROGRA~1\JavaSoft\JRE\132DB1~1.1_0\bin\hpi.dll
0x6D3B0000 - 0x6D3BD000 C:\PROGRA~1\JavaSoft\JRE\132DB1~1.1_0\bin\verify.dll
0x6D250000 - 0x6D266000 C:\PROGRA~1\JavaSoft\JRE\132DB1~1.1_0\bin\java.dll
0x6D3C0000 - 0x6D3CD000 C:\PROGRA~1\JavaSoft\JRE\132DB1~1.1_0\bin\zip.dll
0x6D020000 - 0x6D129000 C:\Program Files\JavaSoft\JRE\1.3.1_02\bin\awt.dll
0x73000000 - 0x73023000 C:\WINDOWS\System32\WINSPOOL.DRV
0x76390000 - 0x763AA000 C:\WINDOWS\System32\IMM32.dll
0x6D1E0000 - 0x6D21B000 C:\Program Files\JavaSoft\JRE\1.3.1_02\bin\fontmanager.dll
0x5ED00000 - 0x5EDC6000 C:\WINDOWS\System32\OPENGL32.dll
0x68B20000 - 0x68B3E000 C:\WINDOWS\System32\GLU32.dll
0x73760000 - 0x737A5000 C:\WINDOWS\System32\DDRAW.dll
0x73BC0000 - 0x73BC6000 C:\WINDOWS\System32\DCIMAN32.dll
0x69500000 - 0x69816000 C:\WINDOWS\System32\nvoglnt.dll
0x76C90000 - 0x76CB2000 C:\WINDOWS\system32\imagehlp.dll
0x6D510000 - 0x6D58C000 C:\WINDOWS\system32\DBGHELP.dll
0x76BF0000 - 0x76BFB000 C:\WINDOWS\System32\PSAPI.DLL
Local Time = Wed Apr 03 18:51:17 2002
Elapsed Time = 13
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.3.1_02-b02 mixed mode)Chuck,
I stumbled in here looking for help, I am a PC user,
not a coder or developer (How sad. <g>). I checked for
updates to the Nvidia driver (none), Windows XP (not
at this time), and DirectX 8.1 (not at this time,
these come on the XP updates page so far as I know.)
Not too suprising...
I have no idea of how to implement your suggestion on
how to disable the JMV use of DirectX overal in my XP
envornment. I guess that using Internet Explorer 6 to
see web pages with Java on them are pretty much out of
the question for now but I would be happy as a clam if
I could get my LimeWire application going again.
LimeWire is called via a desktop or Start menu
shortcut in this fashion:
Target Box: C:\WINDOWS\system32\javaw.exe -cp .
RunLime
Start In (directory): "C:\Program Files\LimeWire 1.7"
So it appears that java is called via the javaw.exe
file and passes a cp argument (whatever that is), then
there is a period separator (dunno why) and then the
"RunLime" statement that calls up the LimeWire
program.to implement the suggestion, simply add -Dsun.java2d.noddraw=true between "javaw.exe" and "-cp" separating it from them by a space on each side. Your result should look something like this:
c:\windows\system32\javaw.exe -Dsun.java2d.noddraw=true -cp . RunLime
>
I cannot see any need for fancy graphic acceleration
or DirectX being called to play for this application
since it is basicly a file manager that shares.
Nothing fancy about it.It's not the application choosing to do this, but Java itself. Java GUI applications specifically those who use the Swing GUI classes (like LimeWire, if I recall) automatically leverage DirectX. This is really valuable for Swing applications since they emulate Windows (or Mac or Motif) GUI widgets rather than using them, making fast access to display buffers important to ensure best performance.
>
Do you have any idea of how to pass your
"-Dsun.java2d.noddraw=true" statement to disable
DirectX into the above call to start java and
LimeWire?See above.
>
Hanging by the edge of my seat, waiting for more input
on this. Thank you for your time and suggestions.
Paul -
[GeForce 6] problems overclocking my NX6800GT with newer nvidia drivers
Hiya guys,
JUst wondering if anyone else is having issues oc,ing there 6800gt with the newer nvidia drivers?any driver newer than the 71.25 version causes freezes and corruption and does not matter what speed its at even does it at 360 1050 but at default 350 1000 everything is fine.
BUt oc,ing with the msi 71.25 and below drivers it runs without error at 400 1100 temps are at 52c load 45idle,
Have installed fresh winXP pro,thought it may have been a power problem so i ripped out my 420w thermaltake psu and replaced it with a nice new Enermax noisetaker 485w psu with dual 12v:18a rails still no go,have tried every driver availible only drivers 71.25 and below will oc,all driver up toĀ 76.50 will not,also have tried coolbits,rivatuner,powerstrip etc..and still no go.
Has anyone come accross this?? feel free to share.....
AMD64 3200+ 2200mhz
Gigabyte k8ns pro nforce3 mobo
2x512 kingmax pc3200 memory
Msi nx6800gt 256mb agp
2x80gig westerndigital ide HDs
pioneer 107d dvdwriter
samsung dvdrom
Audigy 1 sound with 5.1 genius sound system
Black thermaltake tsunami dream case
21inch sony trinitron flatdisplay
EnermaxĀ noisetakerEG495P-VE dual 12v:18a rails +5v:32a +3.3v:32a 485w PSUwow - this is my story also... I have been up and down the street with my MSI 6800GTs (in SLi) and they do not OC worth a damn... I am pretty bummed out due to the money, time, blood, sweat, and tears I have shovled into this rig and I only get stock...Ā essentially... I have tried all the OC'ing utilities, different power supplies, volt modding... and I think it's got to be some bios setting or maybe the one piece GPU memory cooler design... the GPU and memory both heating this thing... I don't think it works that well... honestly... I have been around the net, on many forums... and the only peeps who have /any/ luck with OC'ing these MSI 6800GTs are water cooled... anyways... I have spent soooo much time on this and for that reason alone I doubt I will be buying MSI products in the future, but I would still like to find a solution which allows me to push my $900 worth of video cards to ultra speeds. Ā I am really considering going with water cooling... but I really don't want to deal with the hassles of it right now... what I would really like to find or buy are some 6800 Ultras reference design coolers to install on my GTs... I think a lot of this inabillty to OC well is heat related... I know I can get 10mhz more out of my cards when my room is cool....Ā I have a LOT of air on these cards... and good ventilation... I have my system stats in another post on this forum entitled "nx6800GT OC issues in SLi" or something like that.Ā Good luck man, and I will let you know if I find a solution for this.
-
PE7 crashing with new NVidia Drivers
Just a note, I updated to the NVidia 191.xx series driver, from the 190.xx version, on my notebook and my desktop PC.Ā Both crashed whenever I used the scrollbar to scroll down the effects or transitions area.Ā I went back to the 190 series and it's fine again.
Just a note the latest 191.xx series drivers from NVidia caused PE7 to become unstable on both my PCs, both running 64 bit Vista.Check out this thread, there have been quite a number of posts on various Forums concerning nVidia issues with the latest drivers:
http://forums.adobe.com/thread/497602?tstart=90
The second post in this thread may be revelant... -
Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
is there a way to put the IMacs into display mode with out logging into my Mac mini first
or is there a portable monitor that I can use that will not require me to login firstThis
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
says:
How do I enable TDM?
Make sure both computers are turned on and awake.Ā
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
How do I exit TDM?
To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
Can I use a third-party keyboard or older Apple keyboard to enable TDM?
Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and -
Overscan missing from new Nvidia Drivers - Mac MIni 2010
So I was able to install new Nvidia drivers on my Mac mini 2010, however, there are no overscan options.. and my tv is connected via HDMI. Is there any workaround for this?
The final version of Appleworks 6 does in fact work on the Intel Mini under Leopard -- but Apple doesn't support it, nor ship it with the new Minis.
A free office suite that is MS Office compatible is NeoOffice:
http://www.neooffice.org/neojava/en/maindownload.php
a similar alternative is OpenOffice:
http://www.openoffice.org/
There is no office suite that is directly compatible with Appleworks files, but if you install AppleWorks 6 on your Mini, you could export files in formats that other office programs can read. -
So what exactly does limited to "one app" mean with a Pro account and the new prices?
So it seems Pro has dropped in price but it is now limited to "one App".
So what exactly does that "one App" mean?
Only one tablet version or one phone version for a certain title?
Or you can have a tablet & phone version including android & iOS for that one title?I think that everyone received it just now…
Changes to Adobe Digital Publishing Suite, Professional Edition
Effective immediately, all customers who newly purchase or renew Digital Publishing Suite (DPS), Professional Edition, will be able to publish only one app per license of DPS Professional Edition.
Under this policy change, Professional Edition customers can publish an unlimited number of issues (.folio files) to a single app and distribute those issues based on purchased fulfillment bundles.
An app created with a single license of DPS Professional Edition can be distributed to any or all of the marketplaces that DPS supports, including the Apple App Store (and Newsstand), Google Play, Amazon Appstore, and the Windows Store.
In conjunction with this policy change, Adobe is reducing the price of a Professional Edition license to $4,800 USD annually (€3,600/¥480,000) or to $400 per month (€300/¥40,000) and will include 1,000 fulfillments annually. The number of fulfillments included with a monthly subscription remain unchanged.
This policy does not apply to test or demo apps published using Professional Edition. The one-app-per-license policy applies only to an app published to a supported marketplace(s).
If you are an agency, upon your renewal or purchase of Professional Edition, you can create only one app per Professional Edition license. If you have multiple clients for whom you are creating apps, either you as the agency or your client must purchase a Professional Edition license for each app published to a supported marketplace(s).
If you are an existing Professional Edition customer and choose to renew your Professional Edition license at the end of your annual agreement, these changes, including the lower price point and 1,000 fulfillments, apply at that time. These changes do not apply to your existing DPS Professional Edition agreement and take effect only if you renew your license.
DPS Professional Edition customers can continue to create unlimited Single Edition apps, which is unchanged under the new policy. A Single Edition app is defined as an app that includes one built-in or embedded folio.
If you expect to publish three or more apps annually, we encourage you to contact your local reseller to discuss pricing for a multi-year Enterprise Edition license.
Enterprise Edition offers additional functionality and benefits not available through Professional Edition. These include app customization, integration with back-end business systems, in-app marketing tools, targeted content based on user entitlement, and the ability to publish apps privately. -
Use iMac in Target Display Mode with a Power Mac G4
I would like to connect my Power Mac G4 MDD (Model = http://support.apple.com/kb/SP63) to the new iMac (27 inch, Mid 2010) in Target Display Mode. That is, I want the new iMac to be the display for my Power Mac G4. Has anybody done this (including using the iMac 27 inch, Late 2009, which can also do this)? In a general sort of way, this sort of thing is described on this support page: http://support.apple.com/kb/ht3924.
The problem: The iMac requires a Mini Displayport connection. The PowerMac has ADC and DVI-I display connections and also came with an adapter for converting DVI-I to VGA. How can I convert/adapt to get the appropriate Mini Displayport connection?
Gefen makes a converter (http://www.gefen.com/kvm/dproduct.jsp?prod_id=8913) that will convert DVI-D to Mini Displayport, but the description explicitly says that it will work with DVI-D only while my PowerMac has DVI-I. I know that these are two different, incompatible connections.
Is there another converter that works with DVI-I? Or is there a way to adapt from DVI-I to DVI-D? Or how about a VGA or ADC to Mini Displayport converter?
Thanks.japamac-
Thanks so much for your reply. You're right on target for what I'm looking for and that article is VERY helpful! If you don't mind, I do have a couple more questions/clarifications.
1) First, I think that I didn't read the Wikipedia reference concerning DVI (http://en.wikipedia.org/wiki/DigitalVisualInterface) closely enough. It includes the following paragraph. If I understand it and what you said, it shouldn't be a problem to connect the male DVI-D of the converter into the female DVI-I socket of my Power Mac. Right?
+The long flat pin on a DVI-I connector is wider than the same pin on a DVI-D connector, so it is not possible to connect a male DVI-I to a female DVI-D by removing the 4 analog pins. It is possible, however, to connect a male DVI-D cable to a female DVI-I connector. Many flat panel LCD monitors have only the DVI-D connection so that a DVI-D male to DVI-D male cable will suffice when connecting the monitor to a computer's DVI-I female connector.+
2) I'm not clear on the difference between the Altona AT-DP200 and the Gefen converter. The Gefen converter is somewhat less expensive, so I'm trying to figure out what the downside is. The article you mentioned says that the ATP-DP200 "doesn't scale images", but that seems to only be an issue if I'm trying to connect other devices (PS3, Blu-ray), not if I just want to connect my Power Mac.
The description of the Gefen converter includes the following drawbacks:
+The only major drawback to Gefen's solution is no support for VGA devices or HDCP. A minor gripe would be the fact that the Gefen device only accepts one input resolution and only outputs one resolution (1920 x 1200 at 60 Hz). These limited options aside, the Gefen device looks like it could do the basic trick of transforming a DVI signal to Mini DisplayPort so that you could use your 27" iMac for a few more purposes, provided that the input signal carries the required 1920 x 1200 resolution.+
I'm not clear on what the practical impact of those limitations would be. I don't think the the lack of support for VGA devices or HDCP is an issue for my application. But I'm wondering about the statement that it only accepts one input resolution and outputs only one resolution (1920 x 1200) and the need for the input signal to carry 1920 x 1200. I take it, first of all, that the Power Mac can supply that input resolution. And, what is the impact of the device only having that resolution output to the iMac screen? That is, how would that look on the screen, ugly or okay? Finally, would the Altona device provide a better looking output on the iMac screen because it can apparently handle different resolutions? The manufacturer's description says, "Resolutions: all resolutions up to 1920x1200 (It is Important to select one of the resolutions that display
is capable of displaying, refer to your display’s users manual)."
Thanks again. -
[SOLVED] Prev working xorg.conf won't work with new nvidia
So I just upgraded to the latest nvidia driver. Previously, my xfx 6600 and dell 2001fp could display 1600x1200 just fine, but now it's ratcheting X down to 1400x1050 (even though 1600x1200 is the only option I've specified in the xorg.conf).
Any ideas?
Here's a relevant piece of the X log:
(II) NVIDIA(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1152x768" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "576x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using mode "1600x1200" (no mode of this name)
(**) NVIDIA(0): Validated modes for display device DFP-0:
(**) NVIDIA(0): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
Here's my xorg.conf (sorry for the length):
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "microsoft"
Option "XkbLayout" "us"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "dell lcd"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31-79
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-100
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "xfx"
Driver "nvidia"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "xfx"
Monitor "dell lcd"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1600x1200"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
thankshttp://www.nvnews.net/vbulletin/showthread.php?t=51431
Here's the one I'm using:
Modeline "1600x1200" 140.00 1600 1632 2024 2052 1200 1200 1208 1216 -
Blank screen with new NVIDIA driver (256......)
Hey guys,
A while ago I updated my arch system (pacman -Syu, I read the site beforehand), it was working beautifully before I did so. After I updated and rebooted, my computer turned on and gave me a completely black screen after showing a power saving message. After this, I tried reinstalling drivers, nvidia-xconfig, looking at various logs and dmesg output but nothing helped. I checked IRC and no-one had a clue.
I then decided to do a reinstall, thinking that one of my config files must be dead or something, and I backup my home folder regularly anyway. I did a regular install (from internet), got all my config files sorted out then rebooted. Same power saving message. What do I do?Try setting your refresh rate manually. Create an /etc/X11/xorg.conf.d/10-monitor.conf, and put this inside:
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Default nvidia Device"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1280x1024_60 +0+0; nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I generated that with the nvidia-settings utility. That's usually a safe refresh rate to use, but I can't tell what the supported rates are for you monitor. On another note, your 20-nvidia.conf is fine. Mine is only two lines longer because I enable SLI and manual fan speed control. -
2010 iMac target display mode with 2013 Mac Pro
I have a 2010 27-inch iMac that I want to use with target display mode for a 2013 Mac Pro. I have a mini display port to mini display port cable connecting them. When I plug the cable in the iMac screen goes black, but eventually reverts back to iMac desktop. Pressing Cmd-F2 makes it go black again, but eventually reverts back. I was under the impression that this was the correct cable to use to connect, but it doesn't seem to work. Anyone have ideas for what to do? What am I missing? Thanks!
You can use the cheaper single link adapter
<http://store.apple.com/product/MB570Z/B/mini-displayport-to-dvi-adapter>
if you don't have more than two DVI or HDMI displays.
<http://support.apple.com/en-ca/HT202801>
If you will be using more, you can still use a single link adapter, but it must be ACTIVE, such as
<http://www.amazon.com/Accell-B087B-005B-DisplayPort-Single-Link-Certified/dp/B00 4071ZX0> -
Gnome stuck in fallback mode - not recognizing nvidia drivers
Every time I start a gnome session it is stuck in fallback mode. Checking under System Settings > Details > Graphics I see that the Driver is listed as Unknown and Experience is Fallback. Forced Fallback Mode is OFF. I cannot get it to recognize the nvidia driver (I have also tried nouveau but it did not recognize that either). I have tried re-installing the nvidia driver and rebooting, but I can't seem to fix the problem . Here are the logs that I thought might be relevant. If you need to see anything else please let me know . Thanks.
inxi -Gx
Graphics: Card: NVIDIA GT216 [Quadro FX 880M] bus-ID: 01:00.0
X.org: 1.12.3 drivers: nvidia (unloaded: fbdev) Resolution: 132x96
Kernel if it matters:
Kernel~3.4.6-1-ARCH x86_64
Output of Xorg.0.log
1 [ 29.455]
2 X.Org X Server 1.12.3
3 Release Date: 2012-07-09
4 [ 29.455] X Protocol Version 11, Revision 0
5 [ 29.455] Build Operating System: Linux 3.4.4-3-ARCH x86_64
6 [ 29.455] Current Operating System: Linux pluto 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64
7 [ 29.455] Kernel command line: root=/dev/sda1 ro
8 [ 29.455] Build Date: 09 July 2012 03:59:39PM
9 [ 29.455]
10 [ 29.455] Current version of pixman: 0.26.2
11 [ 29.455] Before reporting problems, check http://wiki.x.org
12 to make sure that you have the latest version.
13 [ 29.455] Markers: (--) probed, (**) from config file, (==) default setting,
14 (++) from command line, (!!) notice, (II) informational,
15 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
16 [ 29.455] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 01:49:20 2012
17 [ 29.501] (==) Using config directory: "/etc/X11/xorg.conf.d"
18 [ 29.516] (==) No Layout section. Using the first Screen section.
19 [ 29.516] (==) No screen section available. Using defaults.
20 [ 29.516] (**) |-->Screen "Default Screen Section" (0)
21 [ 29.516] (**) | |-->Monitor "<default monitor>"
22 [ 29.517] (==) No monitor specified for screen "Default Screen Section".
23 Using a default monitor configuration.
24 [ 29.517] (==) Automatically adding devices
25 [ 29.517] (==) Automatically enabling devices
26 [ 29.554] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
27 [ 29.554] Entry deleted from font path.
28 [ 29.604] (==) FontPath set to:
29 /usr/share/fonts/misc/,
30 /usr/share/fonts/TTF/,
31 /usr/share/fonts/Type1/,
32 /usr/share/fonts/100dpi/,
33 /usr/share/fonts/75dpi/
34 [ 29.604] (==) ModulePath set to "/usr/lib/xorg/modules"
35 [ 29.604] (II) The server relies on udev to provide the list of input devices.
36 If no devices become available, reconfigure udev or disable AutoAddDevices.
37 [ 29.604] (II) Loader magic: 0x7c8b00
38 [ 29.604] (II) Module ABI versions:
39 [ 29.604] X.Org ANSI C Emulation: 0.4
40 [ 29.604] X.Org Video Driver: 12.0
41 [ 29.604] X.Org XInput driver : 16.0
42 [ 29.604] X.Org Server Extension : 6.0
43 [ 29.606] (--) PCI:*(0:1:0:0) 10de:0a3c:17aa:2145 rev 162, Mem @ 0xcc000000/16777216, 0xd0000000/268435456, 0xce000000/335544 32, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
44 [ 29.606] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
45 [ 29.606] (II) LoadModule: "extmod"
46 [ 29.620] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
47 [ 29.632] (II) Module extmod: vendor="X.Org Foundation"
48 [ 29.632] compiled for 1.12.3, module version = 1.0.0
49 [ 29.632] Module class: X.Org Server Extension
50 [ 29.632] ABI class: X.Org Server Extension, version 6.0
51 [ 29.632] (II) Loading extension MIT-SCREEN-SAVER
52 [ 29.632] (II) Loading extension XFree86-VidModeExtension
53 [ 29.632] (II) Loading extension XFree86-DGA
54 [ 29.632] (II) Loading extension DPMS
55 [ 29.632] (II) Loading extension XVideo
56 [ 29.632] (II) Loading extension XVideo-MotionCompensation
57 [ 29.632] (II) Loading extension X-Resource
58 [ 29.632] (II) LoadModule: "dbe"
59 [ 29.632] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
60 [ 29.640] (II) Module dbe: vendor="X.Org Foundation"
61 [ 29.640] compiled for 1.12.3, module version = 1.0.0
62 [ 29.640] Module class: X.Org Server Extension
63 [ 29.640] ABI class: X.Org Server Extension, version 6.0
64 [ 29.640] (II) Loading extension DOUBLE-BUFFER
65 [ 29.640] (II) LoadModule: "glx"
66 [ 29.641] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
67 [ 30.719] (II) Module glx: vendor="NVIDIA Corporation"
68 [ 30.719] compiled for 4.0.2, module version = 1.0.0
69 [ 30.719] Module class: X.Org Server Extension
70 [ 30.719] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012
71 [ 30.719] (II) Loading extension GLX
72 [ 30.719] (II) LoadModule: "record"
73 [ 30.720] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
74 [ 30.727] (II) Module record: vendor="X.Org Foundation"
75 [ 30.727] compiled for 1.12.3, module version = 1.13.0
76 [ 30.727] Module class: X.Org Server Extension
77 [ 30.727] ABI class: X.Org Server Extension, version 6.0
78 [ 30.727] (II) Loading extension RECORD
79 [ 30.727] (II) LoadModule: "dri"
80 [ 30.727] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
81 [ 30.747] (II) Module dri: vendor="X.Org Foundation"
82 [ 30.747] compiled for 1.12.3, module version = 1.0.0
83 [ 30.747] ABI class: X.Org Server Extension, version 6.0
84 [ 30.747] (II) Loading extension XFree86-DRI
85 [ 30.747] (II) LoadModule: "dri2"
86 [ 30.747] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
87 [ 30.751] (II) Module dri2: vendor="X.Org Foundation"
88 [ 30.751] compiled for 1.12.3, module version = 1.2.0
89 [ 30.751] ABI class: X.Org Server Extension, version 6.0
90 [ 30.751] (II) Loading extension DRI2
91 [ 30.751] (==) Matched nouveau as autoconfigured driver 0
92 [ 30.751] (==) Matched nvidia as autoconfigured driver 1
93 [ 30.751] (==) Matched nv as autoconfigured driver 2
94 [ 30.751] (==) Matched vesa as autoconfigured driver 3
95 [ 30.751] (==) Matched fbdev as autoconfigured driver 4
96 [ 30.751] (==) Assigned the driver to the xf86ConfigLayout
97 [ 30.751] (II) LoadModule: "nouveau"
98 [ 30.800] (WW) Warning, couldn't open module nouveau
99 [ 30.800] (II) UnloadModule: "nouveau"
100 [ 30.800] (II) Unloading nouveau
101 [ 30.800] (EE) Failed to load module "nouveau" (module does not exist, 0)
102 [ 30.800] (II) LoadModule: "nvidia"
103 [ 30.800] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
104 [ 30.902] (II) Module nvidia: vendor="NVIDIA Corporation"
105 [ 30.902] compiled for 4.0.2, module version = 1.0.0
106 [ 30.902] Module class: X.Org Video Driver
107 [ 30.942] (II) LoadModule: "nv"
108 [ 30.943] (WW) Warning, couldn't open module nv
109 [ 30.943] (II) UnloadModule: "nv"
110 [ 30.943] (II) Unloading nv
111 [ 30.943] (EE) Failed to load module "nv" (module does not exist, 0)
112 [ 30.943] (II) LoadModule: "vesa"
113 [ 30.943] (WW) Warning, couldn't open module vesa
114 [ 30.943] (II) UnloadModule: "vesa"
115 [ 30.943] (II) Unloading vesa
116 [ 30.943] (EE) Failed to load module "vesa" (module does not exist, 0)
117 [ 30.943] (II) LoadModule: "fbdev"
118 [ 30.943] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
119 [ 30.957] (II) Module fbdev: vendor="X.Org Foundation"
120 [ 30.957] compiled for 1.12.2, module version = 0.4.3
121 [ 30.957] Module class: X.Org Video Driver
122 [ 30.957] ABI class: X.Org Video Driver, version 12.0
123 [ 30.957] (II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 16:04:53 PDT 2012
124 [ 30.957] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
125 [ 30.958] (II) FBDEV: driver for framebuffer: fbdev
126 [ 30.958] (++) using VT number 7
127
128 [ 30.964] (II) Loading sub module "fb"
129 [ 30.964] (II) LoadModule: "fb"
130 [ 30.964] (II) Loading /usr/lib/xorg/modules/libfb.so
131 [ 30.979] (II) Module fb: vendor="X.Org Foundation"
132 [ 30.979] compiled for 1.12.3, module version = 1.0.0
133 [ 30.979] ABI class: X.Org ANSI C Emulation, version 0.4
134 [ 30.980] (II) Loading sub module "wfb"
135 [ 30.980] (II) LoadModule: "wfb"
136 [ 30.980] (II) Loading /usr/lib/xorg/modules/libwfb.so
137 [ 30.988] (II) Module wfb: vendor="X.Org Foundation"
138 [ 30.988] compiled for 1.12.3, module version = 1.0.0
139 [ 30.988] ABI class: X.Org ANSI C Emulation, version 0.4
140 [ 30.988] (II) Loading sub module "ramdac"
141 [ 30.988] (II) LoadModule: "ramdac"
142 [ 30.988] (II) Module "ramdac" already built-in
143 [ 31.014] (WW) Falling back to old probe method for fbdev
144 [ 31.014] (II) Loading sub module "fbdevhw"
145 [ 31.014] (II) LoadModule: "fbdevhw"
146 [ 31.015] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
147 [ 31.031] (II) Module fbdevhw: vendor="X.Org Foundation"
148 [ 31.031] compiled for 1.12.3, module version = 0.0.2
149 [ 31.031] ABI class: X.Org Video Driver, version 12.0
150 [ 31.031] (EE) open /dev/fb0: No such file or directory
151 [ 31.031] (II) NVIDIA(0): Creating default Display subsection in Screen section
152 "Default Screen Section" for depth/fbbpp 24/32
153 [ 31.031] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
154 [ 31.031] (==) NVIDIA(0): RGB weight 888
155 [ 31.031] (==) NVIDIA(0): Default visual is TrueColor
156 [ 31.031] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
157 [ 31.031] (**) NVIDIA(0): Enabling 2D acceleration
158 [ 32.658] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
159 [ 32.658] (II) NVIDIA(GPU-0): 3D Vision stereo.
160 [ 32.661] (II) NVIDIA(0): NVIDIA GPU Quadro FX 880M (GT216GL) at PCI:1:0:0 (GPU-0)
161 [ 32.662] (--) NVIDIA(0): Memory: 1048576 kBytes
162 [ 32.662] (--) NVIDIA(0): VideoBIOS: 70.16.5f.00.0a
163 [ 32.662] (II) NVIDIA(0): Detected PCI Express Link width: 16X
164 [ 32.662] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
165 [ 32.673] (--) NVIDIA(0): Valid display device(s) on Quadro FX 880M at PCI:1:0:0
166 [ 32.673] (--) NVIDIA(0): CRT-0
167 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0) (connected)
168 [ 32.673] (--) NVIDIA(0): DFP-1
169 [ 32.673] (--) NVIDIA(0): DFP-2
170 [ 32.673] (--) NVIDIA(0): DFP-3
171 [ 32.673] (--) NVIDIA(0): DFP-4
172 [ 32.673] (--) NVIDIA(0): DFP-5
173 [ 32.673] (--) NVIDIA(0): DFP-6
174 [ 32.673] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
175 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): 330.0 MHz maximum pixel clock
176 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): Internal Dual Link LVDS
177 [ 32.673] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
178 [ 32.673] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
179 [ 32.673] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
180 [ 32.673] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
181 [ 32.673] (--) NVIDIA(0): DFP-3: 165.0 MHz maximum pixel clock
182 [ 32.673] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS
183 [ 32.673] (--) NVIDIA(0): DFP-4: 480.0 MHz maximum pixel clock
184 [ 32.673] (--) NVIDIA(0): DFP-4: Internal DisplayPort
185 [ 32.673] (--) NVIDIA(0): DFP-5: 480.0 MHz maximum pixel clock
186 [ 32.673] (--) NVIDIA(0): DFP-5: Internal DisplayPort
187 [ 32.673] (--) NVIDIA(0): DFP-6: 480.0 MHz maximum pixel clock
188 [ 32.673] (--) NVIDIA(0): DFP-6: Internal DisplayPort
189 [ 32.673] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
190 [ 32.673] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
191 [ 32.674] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
192 [ 32.674] (==) NVIDIA(0):
193 [ 32.674] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
194 [ 32.674] (==) NVIDIA(0): will be used as the requested mode.
195 [ 32.674] (==) NVIDIA(0):
196 [ 32.675] (II) NVIDIA(0): Validated modes:
197 [ 32.675] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
198 [ 32.675] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
199 [ 33.738] (--) NVIDIA(0): DPI set to (143, 144); computed from "UseEdidDpi" X config
200 [ 33.739] (--) NVIDIA(0): option
201 [ 33.739] (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling
202 [ 33.739] (WW) NVIDIA(0): UBB.
203 [ 33.739] (II) UnloadModule: "fbdev"
204 [ 33.739] (II) Unloading fbdev
205 [ 33.739] (II) UnloadSubModule: "fbdevhw"
206 [ 33.739] (II) Unloading fbdevhw
207 [ 33.739] (--) Depth 24 pixmap format is 32 bpp
208 [ 33.739] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
209 [ 33.744] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
210 [ 33.744] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
211 [ 33.744] (II) NVIDIA(0): configuration option may not be set correctly. When the
212 [ 33.744] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
213 [ 33.744] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
214 [ 33.744] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
215 [ 33.744] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
216 [ 33.744] (II) NVIDIA(0): Config Options in the README.
217 [ 33.747] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
218 [ 34.063] (II) Loading extension NV-GLX
219 [ 34.122] (==) NVIDIA(0): Disabling shared memory pixmaps
220 [ 34.122] (==) NVIDIA(0): Backing store disabled
221 [ 34.122] (==) NVIDIA(0): Silken mouse enabled
222 [ 34.122] (==) NVIDIA(0): DPMS enabled
223 [ 34.123] (II) Loading extension NV-CONTROL
224 [ 34.123] (II) Loading extension XINERAMA
225 [ 34.123] (II) Loading sub module "dri2"
226 [ 34.123] (II) LoadModule: "dri2"
227 [ 34.123] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
228 [ 34.123] (II) Module dri2: vendor="X.Org Foundation"
229 [ 34.123] compiled for 1.12.3, module version = 1.2.0
230 [ 34.123] ABI class: X.Org Server Extension, version 6.0
231 [ 34.123] (II) NVIDIA(0): [DRI2] Setup complete
232 [ 34.123] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
233 [ 34.123] (--) RandR disabled
234 [ 34.123] (II) Initializing built-in extension Generic Event Extension
235 [ 34.123] (II) Initializing built-in extension SHAPE
236 [ 34.123] (II) Initializing built-in extension MIT-SHM
237 [ 34.123] (II) Initializing built-in extension XInputExtension
238 [ 34.123] (II) Initializing built-in extension XTEST
239 [ 34.123] (II) Initializing built-in extension BIG-REQUESTS
240 [ 34.123] (II) Initializing built-in extension SYNC
241 [ 34.123] (II) Initializing built-in extension XKEYBOARD
242 [ 34.123] (II) Initializing built-in extension XC-MISC
243 [ 34.124] (II) Initializing built-in extension SECURITY
244 [ 34.124] (II) Initializing built-in extension XINERAMA
245 [ 34.124] (II) Initializing built-in extension XFIXES
246 [ 34.124] (II) Initializing built-in extension RENDER
247 [ 34.124] (II) Initializing built-in extension RANDR
248 [ 34.124] (II) Initializing built-in extension COMPOSITE
249 [ 34.124] (II) Initializing built-in extension DAMAGE
250 [ 34.126] (II) Initializing extension GLX
251 [ 34.689] (II) config/udev: Adding input device Power Button (/dev/input/event3)
252 [ 34.689] (**) Power Button: Applying InputClass "evdev keyboard catchall"
253 [ 34.689] (II) LoadModule: "evdev"
254 [ 34.689] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
255 [ 34.704] (II) Module evdev: vendor="X.Org Foundation"
256 [ 34.704] compiled for 1.12.3, module version = 2.7.1
257 [ 34.704] Module class: X.Org XInput Driver
258 [ 34.704] ABI class: X.Org XInput driver, version 16.0
259 [ 34.704] (II) Using input driver 'evdev' for 'Power Button'
260 [ 34.704] (**) Power Button: always reports core events
261 [ 34.704] (**) evdev: Power Button: Device: "/dev/input/event3"
262 [ 34.704] (--) evdev: Power Button: Vendor 0 Product 0x1
263 [ 34.704] (--) evdev: Power Button: Found keys
264 [ 34.704] (II) evdev: Power Button: Configuring as keyboard
265 [ 34.704] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
266 [ 34.704] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
267 [ 34.704] (**) Option "xkb_rules" "evdev"
268 [ 34.704] (**) Option "xkb_model" "evdev"
269 [ 34.704] (**) Option "xkb_layout" "us"
270 [ 34.727] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
271 [ 34.727] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
272 [ 34.727] (II) Using input driver 'evdev' for 'Video Bus'
273 [ 34.727] (**) Video Bus: always reports core events
274 [ 34.727] (**) evdev: Video Bus: Device: "/dev/input/event4"
275 [ 34.728] (--) evdev: Video Bus: Vendor 0 Product 0x6
276 [ 34.728] (--) evdev: Video Bus: Found keys
277 [ 34.728] (II) evdev: Video Bus: Configuring as keyboard
278 [ 34.728] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input4/ev ent4"
279 [ 34.728] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
280 [ 34.728] (**) Option "xkb_rules" "evdev"
281 [ 34.728] (**) Option "xkb_model" "evdev"
282 [ 34.728] (**) Option "xkb_layout" "us"
283 [ 34.728] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
284 [ 34.728] (II) No input driver specified, ignoring this device.
285 [ 34.728] (II) This device may have been added with another device file.
286 [ 34.729] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
287 [ 34.729] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
288 [ 34.729] (II) Using input driver 'evdev' for 'Sleep Button'
289 [ 34.729] (**) Sleep Button: always reports core events
290 [ 34.729] (**) evdev: Sleep Button: Device: "/dev/input/event2"
291 [ 34.729] (--) evdev: Sleep Button: Vendor 0 Product 0x3
292 [ 34.729] (--) evdev: Sleep Button: Found keys
293 [ 34.729] (II) evdev: Sleep Button: Configuring as keyboard
294 [ 34.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
295 [ 34.729] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
296 [ 34.729] (**) Option "xkb_rules" "evdev"
297 [ 34.729] (**) Option "xkb_model" "evdev"
298 [ 34.729] (**) Option "xkb_layout" "us"
299 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
300 [ 34.730] (II) No input driver specified, ignoring this device.
301 [ 34.730] (II) This device may have been added with another device file.
302 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
303 [ 34.730] (II) No input driver specified, ignoring this device.
304 [ 34.730] (II) This device may have been added with another device file.
305 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
306 [ 34.731] (II) No input driver specified, ignoring this device.
307 [ 34.731] (II) This device may have been added with another device file.
308 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
309 [ 34.731] (II) No input driver specified, ignoring this device.
310 [ 34.731] (II) This device may have been added with another device file.
311 [ 34.732] (II) config/udev: Adding input device Integrated Camera (/dev/input/event6)
312 [ 34.732] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
313 [ 34.732] (II) Using input driver 'evdev' for 'Integrated Camera'
314 [ 34.732] (**) Integrated Camera: always reports core events
315 [ 34.732] (**) evdev: Integrated Camera: Device: "/dev/input/event6"
316 [ 34.732] (--) evdev: Integrated Camera: Vendor 0x17ef Product 0x480f
317 [ 34.732] (--) evdev: Integrated Camera: Found keys
318 [ 34.732] (II) evdev: Integrated Camera: Configuring as keyboard
319 [ 34.732] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input6/event6"
320 [ 34.732] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
321 [ 34.732] (**) Option "xkb_rules" "evdev"
322 [ 34.732] (**) Option "xkb_model" "evdev"
323 [ 34.732] (**) Option "xkb_layout" "us"
324 [ 34.732] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
325 [ 34.732] (II) No input driver specified, ignoring this device.
326 [ 34.732] (II) This device may have been added with another device file.
327 [ 34.733] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
328 [ 34.733] (II) No input driver specified, ignoring this device.
329 [ 34.733] (II) This device may have been added with another device file.
330 [ 34.733] (II) config/udev: Adding input device HDA Intel Dock Mic (/dev/input/event11)
331 [ 34.733] (II) No input driver specified, ignoring this device.
332 [ 34.733] (II) This device may have been added with another device file.
333 [ 34.734] (II) config/udev: Adding input device HDA Intel Dock Headphone (/dev/input/event12)
334 [ 34.734] (II) No input driver specified, ignoring this device.
335 [ 34.734] (II) This device may have been added with another device file.
336 [ 34.734] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
337 [ 34.734] (II) No input driver specified, ignoring this device.
338 [ 34.734] (II) This device may have been added with another device file.
339 [ 34.735] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
340 [ 34.735] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
341 [ 34.735] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
342 [ 34.735] (**) AT Translated Set 2 keyboard: always reports core events
343 [ 34.735] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
344 [ 34.735] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
345 [ 34.735] (--) evdev: AT Translated Set 2 keyboard: Found keys
346 [ 34.735] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
347 [ 34.735] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
348 [ 34.735] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
349 [ 34.735] (**) Option "xkb_rules" "evdev"
350 [ 34.735] (**) Option "xkb_model" "evdev"
351 [ 34.735] (**) Option "xkb_layout" "us"
352 [ 34.736] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
353 [ 34.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
354 [ 34.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
355 [ 34.736] (II) LoadModule: "synaptics"
356 [ 34.736] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
357 [ 34.757] (II) Module synaptics: vendor="X.Org Foundation"
358 [ 34.757] compiled for 1.12.2, module version = 1.6.2
359 [ 34.757] Module class: X.Org XInput Driver
360 [ 34.757] ABI class: X.Org XInput driver, version 16.0
361 [ 34.757] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
362 [ 34.757] (**) SynPS/2 Synaptics TouchPad: always reports core events
363 [ 34.757] (**) Option "Device" "/dev/input/event8"
364 [ 34.757] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
365 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
366 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
367 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
368 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
369 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
370 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
371 [ 34.758] (**) Option "TapButton1" "1"
372 [ 34.758] (**) Option "TapButton2" "2"
373 [ 34.758] (**) Option "TapButton3" "3"
374 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
359 [ 34.757] Module class: X.Org XInput Driver
360 [ 34.757] ABI class: X.Org XInput driver, version 16.0
361 [ 34.757] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
362 [ 34.757] (**) SynPS/2 Synaptics TouchPad: always reports core events
363 [ 34.757] (**) Option "Device" "/dev/input/event8"
364 [ 34.757] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
365 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
366 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
367 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
368 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
369 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
370 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
371 [ 34.758] (**) Option "TapButton1" "1"
372 [ 34.758] (**) Option "TapButton2" "2"
373 [ 34.758] (**) Option "TapButton3" "3"
374 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
375 [ 34.758] (**) SynPS/2 Synaptics TouchPad: always reports core events
376 [ 34.758] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
377 [ 34.758] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
378 [ 34.758] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
379 [ 34.758] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
380 [ 34.758] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
381 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
382 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
383 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
384 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
385 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
386 [ 34.758] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
387 [ 34.758] (II) No input driver specified, ignoring this device.
388 [ 34.758] (II) This device may have been added with another device file.
389 [ 34.759] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event18)
390 [ 34.759] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
391 [ 34.759] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
392 [ 34.759] (**) TPPS/2 IBM TrackPoint: always reports core events
393 [ 34.759] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event18"
394 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
395 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
396 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
397 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
398 [ 34.759] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
399 [ 34.759] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
400 [ 34.759] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
401 [ 34.759] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input18/event18"
402 [ 34.759] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
403 [ 34.759] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
404 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
405 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
406 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
407 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
408 [ 34.759] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
409 [ 34.759] (II) No input driver specified, ignoring this device.
410 [ 34.759] (II) This device may have been added with another device file.
411 [ 34.759] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
412 [ 34.759] (II) No input driver specified, ignoring this device.
413 [ 34.759] (II) This device may have been added with another device file.
414 [ 34.760] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
415 [ 34.760] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
416 [ 34.760] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
417 [ 34.760] (**) ThinkPad Extra Buttons: always reports core events
418 [ 34.760] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event7"
419 [ 34.760] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
420 [ 34.760] (--) evdev: ThinkPad Extra Buttons: Found keys
421 [ 34.760] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
422 [ 34.760] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event7"
423 [ 34.760] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
424 [ 34.760] (**) Option "xkb_rules" "evdev"
425 [ 34.760] (**) Option "xkb_model" "evdev"
426 [ 34.760] (**) Option "xkb_layout" "us"
427 [ 34.789] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
428 [ 34.789] (II) NVIDIA(GPU-0): 3D Vision stereo.
429 [ 34.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
430 [ 34.789] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
431 [ 34.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
432 [ 40.300] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
433 [ 40.300] (II) NVIDIA(GPU-0): 3D Vision stereo.
434 [ 40.301] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
435 [ 40.301] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
436 [ 40.301] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
437 [ 968.853] (II) evdev: Power Button: Close
438 [ 968.853] (II) UnloadModule: "evdev"
439 [ 968.873] (II) evdev: Video Bus: Close
440 [ 968.873] (II) UnloadModule: "evdev"
441 [ 968.893] (II) evdev: Sleep Button: Close
442 [ 968.893] (II) UnloadModule: "evdev"
443 [ 968.896] (II) evdev: Integrated Camera: Close
444 [ 968.896] (II) UnloadModule: "evdev"
445 [ 968.896] (II) evdev: AT Translated Set 2 keyboard: Close
446 [ 968.897] (II) UnloadModule: "evdev"
447 [ 968.897] (II) UnloadModule: "synaptics"
448 [ 968.897] (II) evdev: TPPS/2 IBM TrackPoint: Close
449 [ 968.897] (II) UnloadModule: "evdev"
450 [ 968.898] (II) evdev: ThinkPad Extra Buttons: Close
451 [ 968.898] (II) UnloadModule: "evdev"
452 [ 969.425] Server terminated successfully (0). Closing log file.
A case insensitive grep of nvidia on the previous log file (Xorg.0.log)
1 [ 30.719] (II) Module glx: vendor="NVIDIA Corporation"
2 [ 30.719] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012
3 [ 30.751] (==) Matched nvidia as autoconfigured driver 1
4 [ 30.800] (II) LoadModule: "nvidia"
5 [ 30.800] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
6 [ 30.902] (II) Module nvidia: vendor="NVIDIA Corporation"
7 [ 30.957] (II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 16:04:53 PDT 2012
8 [ 30.957] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
9 [ 31.031] (II) NVIDIA(0): Creating default Display subsection in Screen section
10 [ 31.031] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
11 [ 31.031] (==) NVIDIA(0): RGB weight 888
12 [ 31.031] (==) NVIDIA(0): Default visual is TrueColor
13 [ 31.031] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
14 [ 31.031] (**) NVIDIA(0): Enabling 2D acceleration
15 [ 32.658] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
16 [ 32.658] (II) NVIDIA(GPU-0): 3D Vision stereo.
17 [ 32.661] (II) NVIDIA(0): NVIDIA GPU Quadro FX 880M (GT216GL) at PCI:1:0:0 (GPU-0)
18 [ 32.662] (--) NVIDIA(0): Memory: 1048576 kBytes
19 [ 32.662] (--) NVIDIA(0): VideoBIOS: 70.16.5f.00.0a
20 [ 32.662] (II) NVIDIA(0): Detected PCI Express Link width: 16X
21 [ 32.662] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
22 [ 32.673] (--) NVIDIA(0): Valid display device(s) on Quadro FX 880M at PCI:1:0:0
23 [ 32.673] (--) NVIDIA(0): CRT-0
24 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0) (connected)
25 [ 32.673] (--) NVIDIA(0): DFP-1
26 [ 32.673] (--) NVIDIA(0): DFP-2
27 [ 32.673] (--) NVIDIA(0): DFP-3
28 [ 32.673] (--) NVIDIA(0): DFP-4
29 [ 32.673] (--) NVIDIA(0): DFP-5
30 [ 32.673] (--) NVIDIA(0): DFP-6
31 [ 32.673] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
32 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): 330.0 MHz maximum pixel clock
33 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): Internal Dual Link LVDS
34 [ 32.673] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
35 [ 32.673] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
36 [ 32.673] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
37 [ 32.673] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
38 [ 32.673] (--) NVIDIA(0): DFP-3: 165.0 MHz maximum pixel clock
39 [ 32.673] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS
40 [ 32.673] (--) NVIDIA(0): DFP-4: 480.0 MHz maximum pixel clock
41 [ 32.673] (--) NVIDIA(0): DFP-4: Internal DisplayPort
42 [ 32.673] (--) NVIDIA(0): DFP-5: 480.0 MHz maximum pixel clock
43 [ 32.673] (--) NVIDIA(0): DFP-5: Internal DisplayPort
44 [ 32.673] (--) NVIDIA(0): DFP-6: 480.0 MHz maximum pixel clock
45 [ 32.673] (--) NVIDIA(0): DFP-6: Internal DisplayPort
46 [ 32.673] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
47 [ 32.673] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
48 [ 32.674] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
49 [ 32.674] (==) NVIDIA(0):
50 [ 32.674] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
51 [ 32.674] (==) NVIDIA(0): will be used as the requested mode.
52 [ 32.674] (==) NVIDIA(0):
53 [ 32.675] (II) NVIDIA(0): Validated modes:
54 [ 32.675] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
55 [ 32.675] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
56 [ 33.738] (--) NVIDIA(0): DPI set to (143, 144); computed from "UseEdidDpi" X config
57 [ 33.739] (--) NVIDIA(0): option
58 [ 33.739] (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling
59 [ 33.739] (WW) NVIDIA(0): UBB.
60 [ 33.739] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
61 [ 33.744] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
62 [ 33.744] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
63 [ 33.744] (II) NVIDIA(0): configuration option may not be set correctly. When the
64 [ 33.744] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
65 [ 33.744] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
66 [ 33.744] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
67 [ 33.744] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
68 [ 33.744] (II) NVIDIA(0): Config Options in the README.
69 [ 33.747] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
70 [ 34.122] (==) NVIDIA(0): Disabling shared memory pixmaps
71 [ 34.122] (==) NVIDIA(0): Backing store disabled
72 [ 34.122] (==) NVIDIA(0): Silken mouse enabled
73 [ 34.122] (==) NVIDIA(0): DPMS enabled
74 [ 34.123] (II) NVIDIA(0): [DRI2] Setup complete
75 [ 34.123] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
76 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
77 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
78 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
79 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
80 [ 34.789] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
81 [ 34.789] (II) NVIDIA(GPU-0): 3D Vision stereo.
82 [ 34.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
83 [ 34.789] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
84 [ 34.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
85 [ 40.300] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
86 [ 40.300] (II) NVIDIA(GPU-0): 3D Vision stereo.
87 [ 40.301] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
88 [ 40.301] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
89 [ 40.301] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
.xsession-errors (Note it was compressed a bit since a lot of the lines were the same)
1 /etc/gdm/Xsession: Beginning session setup...
2 localuser:hal being added to access control list
3 /etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
4 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
5 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
6 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
7 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
8 GPG_AGENT_INFO=/home/hal/.cache/keyring-CmEuMt/gpg:0:1
9 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
10 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
11 GPG_AGENT_INFO=/home/hal/.cache/keyring-CmEuMt/gpg:0:1
12 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
13 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
14 GPG_AGENT_INFO=/home/hal/.cache/keyring-CmEuMt/gpg:0:1
15 Initializing tracker-store...
16 Tracker-Message: Setting up monitor for changes to config file:'/home/hal/.config/tracker/tracker-store.cfg'
17 Failed to play sound: File or data not found
18
19 ** (nm-applet:1443): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unkno wn return code 1
20 ** Message: applet now removed from the notification area
21
22 ** (nm-applet:1443): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown ret urn code 1.
23
24 ** (nm-applet:1443): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
25 Initializing tracker-miner-fs...
26 Tracker-Message: Setting up monitor for changes to config file:'/home/hal/.config/tracker/tracker-miner-fs.cfg'
27 Starting log:
28 File:'/home/hal/.local/share/tracker/tracker-miner-fs.log'
29 Tracker-Message: Setting up monitor for changes to config file:'/home/hal/.config/tracker/tracker-store.cfg'
30 Starting log:
31 File:'/home/hal/.local/share/tracker/tracker-store.log'
32 Window manager warning: Log level 16: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unknown return code 1
33 ** Message: applet now embedded in the notification area
34 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
35 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
36 Window manager warning: Log level 16: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknow n return code 1.
37 Window manager warning: Log level 16: _nm_remote_settings_ensure_inited: (NMRemoteSettings) error initializing: Launch helper e xited with unknown return code 1
38
39 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
40 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
41 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
42
43 (evolution-alarm-notify:1444): evolution-alarm-notify-WARNING **: alarm.c:254: Requested removal of nonexistent alarm!
44 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
45 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
46
47 (evolution-alarm-notify:1444): evolution-alarm-notify-WARNING **: alarm.c:254: Requested removal of nonexistent alarm!
48 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
49 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
50
51 (evolution:3988): evolution-network-manager-WARNING **: network_manager_query_state: GDBus.Error:org.freedesktop.DBus.Error.Spa wn.ChildExited: Launch helper exited with unknown return code 1
52 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
53 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
>>> 54-3722 open: No such file or directory
3723 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3724 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
3725 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3726 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3727 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3728 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3729 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3730 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3731 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3732 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3733 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3734 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3735 Window manager warning: Log level 8: _shell_embedded_window_unrealize: assertion `SHELL_IS_EMBEDDED_WINDOW (window)' failed
3736 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3737 Window manager warning: Got a request to focus 0x2000016 (Inbox (232) with a timestamp of 0. This shouldn't happen!
3738 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3739 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
3740 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3741 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
3742 PolicyKit daemon disconnected from the bus.
3743 We are no longer a registered authentication agent.
3744 [1337117088,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provi ded by the application
3745 [1337117088,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 1 is not ready
3746 [1337117088,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 1 is not ready
3747 [1337117088,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 1 is not ready
3748 [1337117398,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 0 is not ready
3749 [1337117398,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 0 is not ready
3750 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3751 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3752 ** Message: Got disconnected from the system message bus; retrying to reconnect every 10 seconds
3753 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3754 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3755 Window manager warning: Got a request to focus 0x1c00005 (hal@pluto:) with a timestamp of 0. This shouldn't happen!
3756 ** Message: applet now removed from the notification area
3757 gnome-session[1367]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
3758
3759
3760 (gnome-shell-calendar-server:1486): Gdk-WARNING **: gnome-shell-calendar-server: Fatal IO error 11 (Resource temporarily unavai lable) on X server :0.
3761
3762
3763 (nm-applet:1443): Gdk-WARNING **: nm-applet: Fatal IO error 2 (No such file or directory) on X server :0.
3764
3765
3766 (gnome-screensaver:1452): Gdk-WARNING **: gnome-screensaver: Fatal IO error 11 (Resource temporarily unavailable) on X server : 0.
3767
3768 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3769
3770 (gnome-settings-daemon:4503): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
3771
3772
3773 (gnome-terminal:4345): Gdk-WARNING **: gnome-terminal: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
3774
3775 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3776
3777 Received signal:15->'Terminated'
3778 OK
3779There is one thing I forgot to clarify, have setup up the pc as a server so I do not have direct access to the server. Everything is forwarded over ssh (using nx to connect to the server and start a gnome session). Starting KiTTY (a modification of PuTTY) with x11 forwarding I do not see any windows when I run "xinit -- /usr/bin/X -nolisten tcp". I get the following:
X.Org X Server 1.12.3
Release Date: 2012-07-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.4.4-3-ARCH x86_64
Current Operating System: Linux pluto 3.4.7-1-ARCH #1 SMP PREEMPT Sun Jul 29 22:02:56 CEST 2012 x86_64
Kernel command line: root=/dev/sda1 ro
Build Date: 09 July 2012 03:59:39PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 14:47:36 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
xinit: Unable to run program "xterm": No such file or directory
Specify a program on the command line or make sure that /usr/bin
is in your path.
xinit: connection to X server lost
waiting for X server to shut down .Server terminated successfully (0). Closing log file.
startx gives something similar:
X.Org X Server 1.12.3
Release Date: 2012-07-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.4.4-3-ARCH x86_64
Current Operating System: Linux pluto 3.4.7-1-ARCH #1 SMP PREEMPT Sun Jul 29 22:02:56 CEST 2012 x86_64
Kernel command line: root=/dev/sda1 ro
Build Date: 09 July 2012 03:59:39PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 14:52:11 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
/etc/X11/xinit/xinitrc: line 52: twm: command not found
/etc/X11/xinit/xinitrc: line 53: xclock: command not found
/etc/X11/xinit/xinitrc: line 54: xterm: command not found
/etc/X11/xinit/xinitrc: line 56: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 55: xterm: command not found
xinit: connection to X server lost
waiting for X server to shut down .Server terminated successfully (0). Closing log file.
I remember when I would start the pc that startx I could never get to run, I would always start the gui using gdm, which was the only thing I could get to work. I do not have a .xinitrc. I believe the nx connects and issues gnome-session to start the session but I am not sure. -
Blank screen with proprietary nvidia drivers [SOLVED]
I've just installed arch on a new computer, and have encountered an issue- I can't get it running with the proprietary drivers, just nouveau, which is quite the handicap on a GeForce 660.
I used the beginner's guide since my last fresh install was using the arch installation framework. Everything went more or less smoothly, and I booted in to a working system- indeed, I can still boot into it just fine if I chroot in with my install media and swap back to nouveau. If I don't, I get the typical udev boot messages and all, and then it blanks out instead of going to the login prompt. It also does this if I uninstall both nvidia and nouveau drivers.
I've looked at some threads over this, and none of them seemed to apply. I've tried both current and 304 drivers, regenerated initramfs, and blacklisted nouveau.
One last bit of information that may or may not be relevant: at least one of the threads mentioned these issues being related to GRUB, while I'm booting straight from UEFI using efibootmgr- not sure if that could be related in any way.
Last edited by azripah (2013-07-04 05:29:19)Hm, I seem to have solved it by blacklisting i915, as suggested in the talk page on nvidia drivers for UEFI users.
-
Installing new NVIDIA Drivers in Windows XP (under Boot Camp)
Greetings,
This may seem like a stupid question, but I'll ask anyway. Are we able to download and install the latest 9600M GT WinXP Drivers made available here: http://www.nvidia.com/object/geforcenotebook_winxp_185.85whql.html ?
I noticed the ones that came with my MBP 15" are 177.56, but NVIDIA has posted new ones, 185.5.
Can I update to the latest drivers or am I restricted to the ones that came with my MBP and Leopard Installation?
Thanks!I have been repeatedly advised by Apple that future Boot Camp upgrades may not install properly if users have installed different drivers manually.
I had experienced this myself on my late 2007 MacBook Pro, and I had to roll back the drivers in order to upgrade Boot Camp.
Many issues have been reported about driver conflicts in Boot Camp on the unibody MacBook Pros, and Boot Camp is definitely due for an update. For these reasons, I have chosen not to manually update drivers on my unibody MacBook Pro.
I hope that this helps!
Good luck! -
Installing new NVIDIA Drivers in Windows XP
Greetings,
This may seem like a stupid question, but I'll ask anyway. Are we able to download and install the latest 9600M GT WinXP Drivers? I noticed the ones that came with my MBP 15" are 177.56, but NVIDIA has posted new ones, 185.5.
Can I update to the latest drivers or am I restricted to the ones that came with my MBP and Leopard Installation?
Thanks!Hi Wilde,
Apple recommends to only use the BootCamp Drivers they provide.
However you can tryout these Nvidia driver http://www.nvidia.com/object/geforcenotebook_winxp_185.85whql.html
Make sure to make a backup of your Windows before installing them.
Or at least make a System Restore Point.
Some people use DriverSweeper http://www.guru3d.com/category/driversweeper/ to remove the 'old' drivers prior to installing the new ones.
Take care
Stefan
Maybe you are looking for
-
I accidentally changed the magnification settings in Z10. I cant revrse it. please help Solved! Go to Solution.
-
My skills are rudimentary, I'm a new flex developer. I have done all of the tutorials and examples and I'm just struggling with using an XML attribute checking a response. I've written a simple flex 3 app to talk to Asterisk AJAM. I'm writing the log
-
Just changed my Comcast email from POP to IMAP in hopes my iPhone 5 (iOS 7) would sync with my iMac at home and with web mail. It doesn't sync like my gmail account. Items I sent from my phone don't show up inĀ web mail sent box. Haven't tried to swi
-
Use of external drives and connection types in final cut
What are the performance differences in bringing up stored data into FC6 by using firewire800, 400 and USB? Does it matter much if you get an external drive that only has a USB port, or is it significantly slower? Thanks!
-
Hello! I have had a setup in iPhoto where I can add new photos to existing albums. I see after importing the iPhoto library into Aperture, I cannot import photos right into an album under the iPhoto Library tree unless I create a new project. That sa