Limiting the Amount of Memory the WSUS Database Can Use

Have installed GERMAN WS2012 R2 Essentials and have added plus configered WSUS role. Have "unfortunately" installed ENGLISH SQL Server Management Studio. Have connected Management Studio to
\\.\pipe\MICROSOFT##WID\tsql\query with Windows Authentication, can browse Databases ... BUT when right clicking the server's name and selecting Properties to limit the amount of Memory WSUS Database can use after
a while returns with error stating "cannot show requested dialog because failed to retrieve data for this request as the System could not find the requested file":
Cannot show requested dialog.
ADDITIONAL INFORMATION:
Cannot show requested dialog. (SqlMgmt)
Failed to retrieve data for this request. (SqlManagerUI)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&LinkId=20476
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
A severe error occurred on the current command. The results, if any, should be discarded.
'RegQueryValueEx()' hat den Fehler '2', 'Das System kann die angegebene Datei nicht finden.' zurückgegeben. (Microsoft SQL Server, Error: 0)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.2100&EvtSrc=MSSQLServer&EvtID=0&LinkId=20476
==> The suggested Help links aren't really helping ... What file? Where?
==>==> Maybe I'm in troubles because of the language mix?
==>==>==>Any Chance to set the memory limitations via PS Script?

Hi,
à
Any Chance to set the memory limitations via PS Script?
Please use
osql command-line to check if can help you. For more details, please refer to following article.
WSUS-Limit SQL (Windows
Internal Database) memory
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
à
when right clicking the server's name and selecting Properties to limit the amount of Memory WSUS Database can use after a while returns with error stating "cannot show
requested dialog because failed to retrieve data for this request as the System could not find the requested file"
On current situation, I’m also guess that this issue (above error message) may be caused by different language
versions (GERMAN Windows Sserver 2012 R2 Essentials and
ENGLISH SQL Server Management Studio).
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

The amount of memory used for data is a lot larger than the saved file size why is this and can I get the memory usage down without splitting up the file?

I end up having to take a lot of high sample rate data for relativily long periods of time. When I save the data it is usually over 100 MB. When I load the data for post-processing though the amount of memory used is excessively higher than the file size. This causes my computer to crash because 1.5 GB is not enough. Is there a way to stop this from happening withoput splitting up the file into smaller files.

LabVIEW can efficiently handle large files, far beyond 100Mb, provided that care is taken in the coding of the loading/processing routines. Here are several suggestions:
1) Check out the resources National Instruments has put together (NI Developer Zone > Development Library > Measurement and Automation Software > LabVIEW > Development System > Optimizing Applications > Managing Memory), specifically the article entitled "Managing Large Data Sets in LabVIEW".
2) Load and process the data in chunks if possible.
3) Avoid sending the data to front panel indicators, using local/global variables for data storage, or changing data types unless absolutely necessary.
4) If using LabVIEW 7.1, use the "show buffer" tool to determine when LabVIEW is creating extra
copies of data in memory.

You want to know the amount of space the transaction log for the Customer database is using. Which T-SQL command would you use?

You want to know the amount of space the transaction log for the Customer database is using. Which T-SQL command would you use?

Forced me to do a little research.
DBCC SQLPERF(logspace)
See also
http://stackoverflow.com/questions/198343/how-can-i-get-the-size-of-the-transaction-log-in-sql-2005-programmatically
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

HT3919 In the past was able to adjust the memory for each individual application, my Illustrator CS5 appears is doesn't have enough memory to complete a particular project. How do I boost the amount of memory that Illustrator uses so I can complete my pro

In the past I have always been able to adjust the memory of each individual application,
my Adobe Illustrator CS5 appears that is doesn't have enough memory to complete a particular project.
How do I boost the amount of memory that Illustrator uses so I can complete my project?

With OS X, it automatically allocates RAM and it can't be allocated manually.
What model Mac do you have and what OS X version is it running. Your profile shows a PowerMac and OS 10.6.8. A PowerMac can't run OS 10.6.8. It's max OS is 10.5.x
How much RAM is installed in your Mac? You need to max out the RAM and close other open apps if you are having problems with Illustrator.
 Cheers, Tom

Limit the amount of tasks that a user can claim

I have a custom worklist and I need to develop a requirement for not allowing the users to claim more than one task at a time. Does the Worklist API have something to limit the amount of tasks that a user can claim at a time?.
Thanks in advance.
Neuquino

Apparently the Family Base add-on (https://my.verizonwireless.com/vzw/nos/safeguards/SafeguardProductDetails.action?productName=familybase) from Verizon will allow you to set limits on how much data a particular device can consume. I think it is free for the first 3 months (not sure) after that it will cost $5 per month. I have heard rumors though that it does not work well with iPhones???

Why does the Amount slider on the Detail Panel reset to 0 when saving the file as a Smart Object?

Whenever I open a Smart Object PSD file to adjust previous settings in RAW, I have noticed that the Amount slider in the Detail panel has reset to 0. Does this reduce the files sharpening? Is this a normal behavior? Can this be prevented?
I use a Mac running 10.6.8 and Photoshop CS6, version 13.0.5 x 64.

This behavior happens only on Mac desktop computer, not on my Mac laptop running the same CS6.
After I've edited an ACR file (including sharpening in the Detail panel), I change the file into a PSD Smart Object to complete my edit by clicking on "Open Object". I immediately notice this PSD file is not sharp. If I click on the bottom right of the image icon to return to the RAW file, I find the Amount slider in the Detail Panel has changed from the sharpening amount I gave it, to 0.
If I do the exact same thing on my laptop (running a duplicate of the same Photoshop CS6), this behaviour does not happen. The image remains sharp as a PSD file, and if I check by returning to ACR, the Amount slider has maintained its setting.
Anything more you need?

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff . I received an email stating that Adobe could not release the payment and that

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff .
I received an email stating that Adobe could not release the payment and that I should validate the method of payment , tried to insert another card number but the system does not accept the security VAT reporting error message. How do I validate my license with association staff and confirm the payment card?

Hi Daniel,
For any sort of payment related matter, kindly contact our support team via: http://helpx.adobe.com/in/contact.html?step=CCSN_adobe-id-signing-in_stillNeedHelp
If you are unable to use chat option kindly try below mentioned steps.
Try different browser.
Delete cookies and cache
If you are still not able to chat, Kindly reply with the below mentioned information.
OS version:
Browser Version:
You can also try: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Thanks,
Atul Saini

How to limit the amount of disk space Time Machine will use?

On Yosemite, how do you limit the amount of disk space Time Machine will use?
I'm using a Seagate Goflex Home 2tb drive connected to my router as a Time Machine backup drive. I use this for three things 1)Time Machine 2) an occasional backup of windows document subdirectory 3) backup of music and photos for long term storage. Doing something like re-partioning the drive is not an option. I'll just go buy another drive for time machine's sole use. In addition, using software from Seagate is not an option. I don't want to use their software for different reasons (mainly the GoFlex home is really designed as a "media server" which I don't use. I, of course, use iTunes. ) On the Mac, I'm only using about 250GB total but time machine is rapidly using up space.
Apparently using a terminal command like below, used to work, but no longer works under Yosemite.
For a limit of 100gb the number below would be 100 x 1024
sudo defaults write /Library/Preferences/com.apple.TimeMachine MaxSize 102400
To remove the limit, use the following command:
sudo defaults delete /Library/Preferences/com.apple.TimeMachine MaxSize
Now, I'm not too familiar with terminal and I'm not about ready to issue a command without knowing exactly what it is going to do.
Is there an easier "switch" someplace or an app that does this?
If I don't limit the size, at some point there will not be any space left for windows backups and additional photo and music files.

Hmm- added "sudo" and there was no error reported:
sudo defaults write /Library/Preferences/com.apple.TimeMachine MaxSize xxxxxx
I guess we'll see.

How to calculate the amount of viewing the uploaded document in KM?

hello
     everyone
      I want to calculate the amount of viewing the uploaded document in KM,like the iviews of topics in forum.
     thanks in advance
     lexian

Hi,
   You can develop a hitcount repository services. Each time that you open a document this counter is incremented in one. Then you can show this metadata as a typical property.
Take into account:
Dynamic Knowledge Management Content Using Groovy Scripts
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5165
Documents read statistics
https://www.sdn.sap.com/irj/sdn/thread?threadID=174925
Patricio.

How do you set the amount of time the screen stays lite after your last use?

How do you set the amount of time the screen stays lite after your last use?

Settings>General>Auto-Lock.

What is maximum amount of memory that oracle db can utilize ?

Hi
Thank you for reading my post
What is maximum number of memory that oracle database can utilize for each of its memory structure like sga, caches....
Thanks

ps, the following may help too
VLM) Configurations
Oracle Database for Windows supports Very Large Memory (VLM) configurations in Windows 2000, Windows 2003, and Windows XP, which allows Oracle Database to access more than the 4 gigabyte (GB) of RAM traditionally available to Windows applications.
Note:
This feature is available on Windows 2000, Windows 2003, and Windows XP only with Intel Pentium II and above processors.
Specifically, Oracle Database uses Address Windowing Extensions (AWE) built into Windows 2000, Windows 2003, and Windows XP to access more than 4 GB of RAM.
The requirements for taking advantage of this support are:
1. The computer on which Oracle Database is installed must have more than 4 GB of memory.
2. The operating system must be configured to take advantage of Physical Address Extensions (PAE) by adding the /PAE switch in boot.ini. See Microsoft Knowledge Base article Q268363 for instructions on modifying boot.ini to enable PAE.
3. It is advisable (though not necessary) to enable 4GT support by adding the /3GB parameter in boot.ini. See Microsoft Knowledge Base article Q171793 for additional requirements and instructions on modifying boot.ini to enable 4GT.
4. The user account under which Oracle Database runs (typically the LocalSystem account), must have the "Lock memory pages" Windows 2000 and Windows XP privilege.
5. USE_INDIRECT_DATA_BUFFERS=TRUE must be present in the initialization parameter file for the database instance that will use VLM support. If this parameter is not set, then Oracle Database 10g Release 1 (10.1) or later behaves in exactly the same way as previous releases.
6. Initialization parameters DB_BLOCK_BUFFERS and DB_BLOCK_SIZE must be set to values you have chosen for Oracle Database.
Note:
The total number of bytes of database buffers (that is, DB_BLOCK_BUFFERS multiplied by DB_BLOCK_SIZE) is no longer limited to 3 GB.
Dynamic SGA and multiple block size are not supported with VLM. When VLM is enabled, the following new buffer cache parameters are not supported:
o DB_CACHE_SIZE
o DB_2K_CACHE_SIZE
o DB_4K_CACHE_SIZE
o DB_8K_CACHE_SIZE
o DB_16K_CACHE_SIZE
o DB_32K_CACHE_SIZE
To select the block size for the instance, use the initialization parameter DB_BLOCK_SIZE. The buffer cache size is set by the initialization parameter DB_BLOCK_BUFFERS.
7. Registry parameter AWE_WINDOW_MEMORY must be created and set in the appropriate key for your Oracle home. This parameter is specified in bytes and has a default value of 1 GB. AWE_WINDOW_MEMORY tells Oracle Database how much of its 3 GB address space to reserve for mapping in database buffers.
This memory comes from the 3 GB virtual address space in Oracle Database, so its value must be less than 3 GB. Setting this parameter to a large value has the effect of using more of the address space for buffers and using less AWE memory for buffers. However, since accessing AWE buffers is somewhat slower than accessing virtual address space buffers, Oracle recommends that you tune these parameters to be as large as possible without adversely limiting database operations.
In general, the higher AWE_WINDOW_MEMORY is set, the fewer connections and memory allocations will be possible for Oracle Database. The lower AWE_WINDOW_MEMORY is set, the lower the performance.
8. Once this parameter is set, Oracle Database can be started and will function exactly the same as before except that more database buffers are available to the instance. In addition, disk I/O may be reduced because more Oracle Database data blocks can be cached in the System Global Area (SGA).
Note:
Registry parameter VLM_BUFFER_MEMORY, which enabled VLM configurations in earlier releases, is not supported in Oracle Database 10g Release 1 (10.1) or later.
VLM Instance Tuning
VLM configurations improve database performance by caching more database buffers in memory. This reduces disk I/O compared to configurations without VLM. VLM support in Oracle Database 10g Release 1 (10.1) or later has been re-written to integrate very closely with Windows. Compared to Oracle8i release 2 (8.1.6), VLM users should see better performance with the newer implementation.
Tuning for VLM is no different than tuning for configurations without VLM. It is an iterative task that begins by selecting appropriate DB_BLOCK_SIZE and DB_BLOCK_BUFFERS initialization parameters for the application being supported.
Note:
Oracle Database 10g Release 1 (10.1) or later VLM configurations do not support multiple database block sizes.
AWE_WINDOW_MEMORY, a new registry parameter specific to VLM, tells Oracle Database how much of its address space to reserve for mapping in database buffers. It defaults to a value of 1 GB, which should be suitable for most installations. If DB_BLOCK_SIZE is large, however, the default AWE_WINDOW_MEMORY value of 1 GB may not be sufficient to start the database.
Increasing the value of AWE_WINDOW_MEMORY will improve performance, but it will also limit the amount of memory available for other Oracle Database threads (like foreground threads). Clients may see "out of memory" errors if this value is set too large. As a general guideline, increase the AWE_WINDOW_MEMORY registry value by 20 percent.
For example, if DB_BLOCK_SIZE is set to 8 KB, AWE_WINDOW_MEMORY is set to 1 GB, and the number of LRU latches is set to 32 (16 processor computer), then database startup fails with out of memory errors 27102 and 34. Increasing the value of AWE_WINDOW_MEMORY to 1.2 GB fixes the problem.
Having a large cache in a VLM configuration may also slow down database writer (DBWR) threads. Having more DBWR threads will distribute work required to identify and write buffers to disk and will distribute I/O loads among threads. Initialization parameter DB_WRITER_PROCESSES enables you to configure multiple database writer threads.
A large cache can also introduce contention on the LRU (least recently used) latch. On symmetric multiprocessor (SMP) systems, Oracle Database sets the number of LRU latches to a value equal to one half the number of processors on the system. You can reduce contention on such configurations by increasing the number of LRU latches to twice (or four times) the number of processors on the system.
See Also:
Oracle Database Performance Tuning Guide for more information on instance tuning
Windows 4 GB RAM Tuning (4GT)
The following Windows operating systems include a feature called 4 GB RAM Tuning (4GT):
· Windows Server 2003
· Windows 2000 Advanced Server
· Windows 2000 Datacenter Server
This feature allows memory-intensive applications running on Oracle Database Enterprise Edition to access up to 3 GB of memory, as opposed to the standard 2 GB in previous operating system versions. 4GT provides a tremendous benefit: 50 percent more memory is available for database use, increasing SGA sizes or connection counts.
Large User Populations
Several features allow Oracle Database to support an increasingly large number of database connections on Windows:
· Oracle Database Shared Server Process, which limits the number of threads needed in the Oracle Database process, supports over 10,000 simultaneous connections to a single database instance.
· Oracle Net multiplexing and connection pooling features allow a large configuration to connect more users to a single database instance.
· Oracle Real Application Clusters raises connection counts dramatically by allowing multiple server computers to access the same database files, increasing the number of user connections by tens of thousands, as well as increasing throughput.
rgds
alan

When connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?"

when connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?" Any suggestions please

Hi Michael
These are the answers
to your questions
What is the OS version, Windows Server 2008?
Microsoft Windows [Version 6.0.6001]
SP1
On which disk you choose to install it, the C: drive?
I have Raid 5
What
is the output of the Checkdsk?   It find Nothing
Could
you please upload us a screen shot? I have no
Screen shot
Is
the C: drive is a external drive? NO
Besides,
have you manually assigned the drive letter?
NO
Thanks

IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

I am using the Kurzweil 3000 software and before I can use Read the Web, KESIReader Firefox extension must be installed. This is not compatible with Firefox 5, how can I make your extension to work with my software?

I use the kurzweil 300 software and before I can use Read the Web I must first install the KESIReader.xpi Foxfire extension into Mozilla Foxfire however, the extension is not compatible with Mozilla Foxfire 5 which is the version installed on my computer. What can be done to make this work with Kurzweil 3000 software and the Read the Web tool?
Mozilla Firefox or Microsoft Internet Explorer 7 or 8 Web Browser.
Can you help me with the information I have provided I know the rest of the requirements are meet.

Install Firefox Portable 3.6.22 to your hard drive for that website. <br />
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Is the iphone 5 explosion proof, so I can use it in pharma facility near the solvent materials?

Is the iphone 5 explosion proof, so I can use it in pharma facility near the solvent materials?

Here's one source:
http://intrinsicallysafedevices.com/intrinsically-safe-iphones/
They're not cheap.

Limiting the Amount of Memory the WSUS Database Can Use

Similar Messages

Maybe you are looking for