Limits for data exponential values in Essbase

Hi Gurus,
Can some one let me know the limits for exponential values for the data in essbase. I know how to set it at the time of export. But and the time of data load what is the min and max(range) limit for the Exponent value. like a number 6.75285 E+008 exponent is 8. But what is the min and max like -100 to +100.
Thanks
Sri

Hi,
If I understand correctly, you want to display report id with its corresponding report name in different pages. If in that case, we can use list control to achieve your requirement. For more details, please refer to the following steps:
Drag a list control from Toolbox to design surface.
Drag a tablix with those two fields to the list.
Right-click the List to use the same dataset as the tablix.
Click the list, right-click the Details group to open the Group Properties dialog box in the Row Groups pane.
Add a group grouped on [Report_Id].
Select Page Breaks in the left pane, enable “Between each instance of a group”.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Tolerance Limits for Date and quantity..??

Hi Experts,
We would like to set the GR Tolerance Limits in the Configuration level.
how to set the Tolerance Limits for Date and quantity..??
if we created PO 100qty and date 01-05-009.
if we receive the goods on 20-04-2009 and 50qty...
For GR .. Migo should be give error message..
where can i set this Tolerance Limit Configuration.... can u please explin me..
Thanks in Advance,
Anthyodaya.

Hai
for quantity tolerence limit u can do it while creating P O in item details-->delivery tab.
for date go to SPRO-->mm>purchasing->material master> define purchase value key>in that st.del.time var here it wil compare the dates and shows how much deviation is occuring for GR date
configure messages in SPRO-->mm>environment data--> define attributes of system messages
hope it may help u
regards
chandrasekhar

GR Tolerance Limits for Date and quantity..??

Hi Experts,
We would like to set the GR Tolerance Limits in the Configuration level.
how to set the Tolerance Limits for Date and quantity..??
if we created PO 100qty and date 01-05-009.
if we receive the goods on 20-04-2009 and 50qty...
For GR .. Migo should be give error message..
where can i set this Tolerance Limit Configuration.... can u please explin me..
Thanks in Advance,
Anthyodaya.

Hi,
GR tolerance limits can be set based on the quantity only .It is configuration settings .
MM-->Inventory Management-->Inventory Management and physical Inventory --->set tolerance limit/
Following are the standard settings:
B1 ( order price quantity variance with error message): 50 %
B2 (order price quantity variance with warning): 20 %
VP (variance from moving average price) 25 %
In case of dates, the tolerance limit settings based on delivery date can be achived by using user exists or create a Z t.code goods receipt copying standard one & write a code to apply your logic while you do the GR.
Thanks,
AMIT

Regarding IOP limitations for data landing in reports

We have report with 170 columns in IOP. We are able to land the data around 20,000 records with 170 columns in the simple report. When we try to land the data more than 20,000+ records with 170 columns, the data is not landing on the report and we are not getting any error(in report/log file). Wanted to know is there any IOP limitation for data landing (more than 20,000 records) with more than 170 columns?
We are using excel 2003 as client.
IOP version: 11.1.2.1
~
Rajesh

Hello,
For columns limit
1. Go to interlace/vba folder
2. Open vba_base.xls
3. Open the code of the xls
4. Expand the class modules : in this open InterlaceQuery
5. In this search and replace all "150" by "200" or any other number (number of columns needed)
6. Save this, and export this module to interlace/vba folder.
7. Now you can load the XXX number of columns which you mentioned in that module.
For rows limit
1. Go to interlace/vba folder
2. Open vba_base.xls
3. Open the code of the xls
4. Expand the class modules : in this open InterlaceQuery
5. Check the parameter "MaxRow = 65536"
6. In case this is replaced by some other number make the changes and export the same.
7. Now you can load the XXXXX number of rows which you mentioned in that module.

Missing Standard Dimension Column for data load (MSSQL to Essbase Data)

This is similar error to one posted by Sravan -- however I'm sure I have all dimensions covered -- going from MS SQL to SunOpsys Staging to Essbase. It is telling me missing standard dimension, however I have all accounted for:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last): File "<string>", line 23, in ? com.hyperion.odi.essbase.ODIEssbaseException: Missing standard dimension column for data load
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
I'm using multiple time period inputs -- BegBalance,Jul,Aug,Sep,Oct,Nov,Dec,Jan,Feb,Mar,Apr,May,Jun (target has all of those in place of Time Periods)
I'm using hard coded input mapping for Metric, Scenario, Version, HSP_Rates and Currencies. -> 'Amount', 'Actual', 'Final', 'HSP_InputValue','Local' respectively.
The only thing I can think of is that since I'm loading to each of the months in the Time Periods dimension (the reversal was set up to accomodate that)... and now its somehow still looking for that? Time Periods as a dimension does not show up in the reversal -- only the individual months named above.
Any ideas on this one??

John -- I extracted the data to a file and created a data load rule in Essbase to load the data. All dimensions present and accounted for (five header items as similar here) and everything loads fine.
So not sure what else is wrong -- still getting the missing dimension error.
Any other thoughts?? Here's the entire error message. Thanks for all your help on this.
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 23, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Missing standard dimension column for data load
     at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx8.f$0(<string>:23)
     at org.python.pycode._pyx8.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.g.A(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Missing standard dimension column for data load
     at com.hyperion.odi.essbase.ODIEssbaseDataWriter.validateColumns(Unknown Source)
     ... 32 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Missing standard dimension column for data load
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.g.A(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

Creation of logic group - any limitation for the Criteria Value Field?

I am trying to create simple logic groups in FDM (version 11.1.1.3 and 11.1.2.1). However, an error message displayed in the information bar.
Error: Error adding new record.
Detail: Data access error.
I clicked the "Add" button and created a logic group which contains *1,520* non-sequential source accounts in the Criteria Value Field (with In operator).
I have separated these source accounts with a comma and no spaces in between them. (Note: Operator = x, Value/Exp = 1, Seq = 0) I updated the grid. Then, the error message was displayed and the logic group creation was failed.
And then, I created a new logic group which contains only *100* non-sequential source accounts in the Criteria Value Field (with In operator).
I also separated them with a comma, no spaces and same setting. I updated the grid. And the logic group was added successfully.
Each source account contains 10 characters (alphabet and/or number).
I want to ask:
1. Is there any limitation in specifying source accounts (i.e.. no more than certain number of source accounts for each logic group) in the Criteria Value Field when creating simple logic group?
2. I am adding these logic groups by clicking the "Add" button one by one, is there faster way to do it (i.e.. upload an excel or csv file or source accounts specified)?
Thank you very much!

Thank you Expert for your reply!
I would like to ask about loading the Logic Accounts with the template.
As instructed, I exported the excel out for the template format and updated the template with new Logic Accounts. Then, I imported the excel file in the "Import XLS" section under Tools. The excel file was uploaded successfully. (Note: I am using excel 2010 and saved it as .xls file)
However, there is no changes in the Logic Accounts and seem no updates was made.
I want to ask:
1. Did I import the excel at the right location (i.e. "Import XLS" section under Tools)?
2. Is there anything else I need to do after the file has been imported (i.e. delete the existing logic accounts or click another button(?) for this change) so the new list of logic accounts would become effective?
I would like to use excel to maintain my list of logic accounts for better control in the future.
Thanks in advance!

Help for date field value

I want to manually modify something in our ERP system. But I find some fields in table which is in date type have the value '0000-00-00'. How can I insert the same value to the database?
Our DBMS is oracle 816.
SQL> select to_char(t$curd,'yyyy-mm-dd hh:mi:ss') from triton.ttdsls051702
2 where
3 t$orno = 104497;
TO_CHAR(T$CURD,'YYY
0000-00-00 00:00:00
0000-00-00 00:00:00
0000-00-00 00:00:00
SQL> select to_date('0000-00-00' , 'yyyy-mm-dd') from dual;
select to_date('0000-00-00' , 'yyyy-mm-dd') from dual
ERROR at line 1:
ORA-01843: not a valid month
Please offer me some help. Thank you!

Oracle has some funny ideas about dates. I tried this on 8.0.6, 8.1.7 and 9.0.1.
SQL> SELECT TO_CHAR(TO_DATE('01-01-0001','dd-mm-yyyy'),'j') FROM dual;
TO_CHAR
1721424
SQL> SELECT TO_CHAR(TO_DATE('1721423','j'),'dd-mm-yyyy') FROM dual;
SELECT TO_CHAR(TO_DATE('1721423','j'),'dd-mm-yyyy') FROM dual
ERROR at line 1:
ORA-01841: (full) year must be between -4713 and +9999, and not be 0
but ...
SQL> SELECT TO_CHAR(TO_DATE('1721424','j')-1,'dd-mm-yyyy') FROM dual;
TO_CHAR(TO
00-00-0000
again but...
SQL> CREATE TABLE t (dt DATE);
Table created.
SQL> INSERT INTO t SELECT TO_DATE('1721424','j')-1 from dual;
1 row created.
SQL> ALTER SESSION SET nls_date_format = 'dd-mm-yyyy';
Session altered.
SQL> select * from t;
DT
31-12-0000
yet again but ...
SQL> SELECT TO_CHAR(dt,'dd-mm-yyyy') FROM t;
TO_CHAR(DT
00-00-0000I think it is probably safe to set those dates to null, or some other acceptable default value depending on what t$curd means in your application.
TTFN
John

Maximum character limits for data types under the Definition tab in Outbound Dialer Import Rule configuration.

Hello,
We're running an outbound SIP dialer under UCCE 8.5(4). The need has come up to allow more than 10 characters for the first name field under the Definition tab in the import rule configuration section, however, it seems that 10 characters is the upper limit. The reason for wanting to do this is that we're seeing a large number of calls fail to import because the members first name is larger than 10 characters, for example, an import record with a first name of Maximillian will fail. The idea was presented to simply shorten the member name in the event it exceeds 10 characters. However, the concern is that this will cause the agent to mispronounce the members name when they are connected on the phone during initial greeting. For example, Maximillian now becomes Maximillia. Has anyone ever run into the need to do this? Is there a known workaround? Any ideas would be greatly appreciated.
Regards,
-Mike

Mike,
Are you certain that you're trying to increase the value of the correct field? When you go into your Import Rule > Definition tab > highlight the FirstName field name and click Modify... What you should see for Field length is 1-255. You can easily increase the number of character to over 10.

Set up Tolerance Limits with Date and quantity for GR

Hi Experts,
We would like to set the GR Tolerance Limits with Date and qty.
how to set the Tolerance Limits for Date and quantity..??
if we created PO 100qty and date 01-05-009.
if we receive the goods on 20-04-2009 and 50qty...
For GR .. Migo should be give error message..
where can i set this Tolerance Limit Configuration.... can u please explin me..
Thanks in Advance,
Anthyodaya .

hi,
You can do one thing...
Activate the SLED check...
BY this when the date goes earlier or late from the expected date, then system show you the messages like:
1. Earliest delivery date is DD.MM.YY..
2. Expected delivery date was DD.MM.YY...
In std sap system, the second message is already error message...so when get late delivery then it'll not be possible to maintain the GR...
For the qty varinace, activate the quantity variance either via over/under delievery tolerances..or
Via SPRO settings...
SPRO >> MM >> LIV >> Invoice block >> check for qty tolerances and make the settings as per your requirement...
Regards
Priyanka.P

Tolerance Limits with Date and quantity

Hi Experts,
We would like to set the GR Tolerance Limits with Date and qty.
how to set the Tolerance Limits for Date and quantity..??
if we created PO 100qty and date 01-05-009.
if we receive the goods on 20-04-2009 and 50qty...
For GR .. Migo should be give error message..
where can i set this Tolerance Limit Configuration.... can u please explin me..
Thanks in Advance,
Anthyodaya .

Go to SPRO - Material Managemetn - LIV - Invoice Block - Set Tolerence limit.
USe company code and maintain a value for ST
ST: Date variance (value x days)
The system calculates for each item the product of amount * (scheduled delivery date - date invoice entered) and compares this product with the absolute upper limit defined. This allows relatively high schedule variances for invoice items for small amounts, but only small schedule variances for invoice items for large amounts.

MB5B Report for Date Wise Stock and Value

Hi,
I am Taking MB5B Report for Date Wise Stock and Value.
But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
I have another Doubt in these report three Stock type indicaters are there like these.
1.Storage Location / Batch Stock
2.valuated Stock
3.Special Stock.
But i have one doubt what is defferent these
1.Storage Location / Batch Stock
2.valuated Stock

Hi Prasad,
Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
Regards
Karthick

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......

There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck

Limitation on data file size for Oracle 8i on window 2000

What is the size limitation for each Oracle data file ?
Oracle 8i
Window 2000 server (32-bit)

Hi,
You can get details from the Doc itself
Refer : http://www.taom.ru/docs/oradoc.817/server.817/a76961/ch43.htm#11789 (Oracle8i Reference Release 2 (8.1.6) )
Check 10g also : http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/limits002.htm (10g Release 2 (10.2) )
- Pavan Kumar N

Value Help for Date inverval in Variable Form in Visual Composer

Hi all,
I have created a variable form which has Date interval with value help as one of the parameters.
when i click on the value help and select any date interval then it is displayed as say '20081015:20090101' but when i submit this value i get an error "INVALID_VARIABLE_VALUES".
this variable is working fine when i manually enter the interval as '10/15/2008:01/01/2009'.
is there any way where we can input the date interval value as '10/15/2008:01/01/2009' using the value help.
any help is highly appreciated.
regards,
RK,.

Hi Ramakrishna,
Value help is considered as a popup iview in visual composer. You can change the fields in popup iview like normal iview. Drill down the popup iview of the value help and change the date format using DSTR function.
Try the below link for change the date format.
http://help.sap.com/saphelp_nw04/helpdata/en/d2/63f340e8dd8431e10000000a1550b0/frameset.htm
Regards
Basheer

Dump in Value-Help Component for date

I created a Value-Help-Component for date fields. (I cannot use the standard value help, because I need the help to start in the month, the user is working on).
I am using the Date Navigator to select a date.
If I first change the month with an arrow of the date navigator and then select a date I get a dump in the method IF_WD_CONTEXT_ELEMENT~GET_ATTRIBUTE_REF in line
attr_info = me->node_info->if_wd_context_node_info~get_attribute( name_only ).
, because the element does not have a node_info.
If I just choose a date in the preselected month (without using the arrows of the date navigator) everything is fine.
Does anybody have an idea??
Many thanks in advance.

I found the "solution" to the problem myself.
I used the method bind_structure in the component containing the date navigator.
After I replaced it by set_static_attributes it worked without producing dumps.
Very strange!

Limits for data exponential values in Essbase

Similar Messages

Maybe you are looking for