Line Break for the column

Hi,
I have a BIP Report.
The report includes the layout of a free text column. This text goes towards the right side for sufficient length.
I want to wrap the text or line break this text.
In the rtf template, I am using the following formula:
<?html2fo: OUTPUT_NOTES?>
Any Ideas?

Dear,
Add the UDF's on the marketing document you want the tax break up.
Apply FMS using below queries and call these UDF's on your PLD.
FOR BED
DECLARE @Amount as Numeric(19,2)
DECLARE @Rate as Numeric(19,0)
DECLARE @TAmount as Numeric(19,2)
set @TAmount =$[$38.21.Number]
SELECT    @Rate=STA1.Rate
FROM         OSTC INNER JOIN
                      STC1 ON OSTC.Code = STC1.STCCode INNER JOIN
                      STA1 ON STC1.STACode = STA1.StaCode Where   OSTC.Code=$[$38.160.0] And STA1.SttType='9' order by STA1.EfctDate desc
set @Amount=(@TAmount * @Rate)/100
Select @Amount
For Cess
DECLARE @Amount as Numeric(19,2)
DECLARE @Rate as Numeric(19,0)
DECLARE @TAmount as Numeric(19,2)
set @TAmount = $[$38.U_BED.Number]
SELECT    @Rate=STA1.Rate
FROM         OSTC INNER JOIN
                      STC1 ON OSTC.Code = STC1.STCCode INNER JOIN
                      STA1 ON STC1.STACode = STA1.StaCode Where   OSTC.Code=$[$38.160.0] And STA1.SttType='8' order by STA1.EfctDate desc
set @Amount=(@TAmount * @Rate)/100
Select @Amount
For HCess
DECLARE @Amount as Numeric(19,2)
DECLARE @Rate as Numeric(19,0)
DECLARE @TAmount as Numeric(19,2)
set @TAmount = $[$38.U_BED.Number]
SELECT    @Rate=STA1.Rate
FROM         OSTC INNER JOIN
                      STC1 ON OSTC.Code = STC1.STCCode INNER JOIN
                      STA1 ON STC1.STACode = STA1.StaCode Where   OSTC.Code=$[$38.160.0] And STA1.SttType='10' order by STA1.EfctDate desc
set @Amount=(@TAmount * @Rate)/100
Select @Amount
This will help you.
regards,
Neetu

Similar Messages

  • Calendar app. How do i insert a line break in the title of an appointment?

    How do i insert a line break in the title of an appointment?

    Jonny Marshall wrote:
    Hi, I've had this problem for a while now but just can't find the answer anywhere. I keep seeing that 'shift+return' or 'ctrl+return' will create a new line in a cell in numbers but it just doesn't! I can't seem to find a way of doing it. Please help!
    Difficult to guess what is wrong in your system or what you made wrongly.
    Here it work.
    Maybe a problem of corrupted preferences.
    Try to run Numbers from an other User Account.
    If it behaves flawlessly it will be time to try to disable the Preferences files:
    <startupVolume>:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Numbers. plist
    <startupVolume>:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Numbers. LSSharedFileList.plist
    (Also, not numbers related, but if you happen to know how I find out what version of OSX I'm using please let me know.)
    menu :  (Apple)
    menu item : About this mac
    Yvan KOENIG (VALLAURIS, France) jeudi 3 juin 2010 14:41:07

  • How to put line break in the text

    Hi guys,
    This is a simple problem.i don't know how to concat a line break while creating a text.
    I am looping through the results of a query and want to form the text using the results.
    For each row of the resultset,I want to create a new line in the text i create.
    I was wondering how to put a new line in the text.
    I thought I can concat '\n' ,but it does not work.
    the code snippet in the procedure is :
    for c1_rec in c1 loop
    vMsg := ' There are ' || c1_rec.total ||
         ' documents of type ' || c1_rec.doc_type || '\n' ;
    end loop;
    Please give the solution.
    Thanks in advance.

    Thank you Mark.
    I tried your suggestion.But line break is not working in email.
    Here is how my code is
    in procedure 1 ,i create the message String as :
    for c1_rec in c1 loop
    vMsg := vMsg || ' ' || today_str || ' - ' || c1_rec.total ||
         ' Total inbound documents from : ' || c1_rec.target_value || CHR(13)||CHR10) ;
    dbms_output.put_line(' ' || vMsg);
    end loop;
    --here sending mail calling another procedure
    sendmail( '[email protected]' ,'[email protected]' , 'Test Subject ' , vMsg );
    In Procedure 2( i.e sendmail procedure )
    i am preparing email server connection from and to adresses .Then i am preparing and sending message as
    crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
    conn:= utl_smtp.open_connection( EmailServer, Port );
         utl_smtp.helo( conn, EmailServer );
         utl_smtp.mail( conn, SENDER);
         utl_smtp.rcpt( conn, RECEIVER )
    mesg:= 'Subject: ' || SUBJECT || crlf ||
                   'Date: '||TO_CHAR( SYSDATE, 'Dy, dd Mon yyyy hh24:mi:ss' )||
                   crlf ||
                   'From:'||SENDER|| crlf ||
                   'To: '||RECEIVER || crlf ||
                   'Content-Type: text/html; charset=ISO-8859-1' || crlf ||
                   '' || crlf || MESSAGE ;
         utl_smtp.data( conn, mesg );
         utl_smtp.quit( conn );
    even now the mail we are getting is not having the line break.I am having line break in dbms output,but not in the mail.
    Is there any mistake how I am sending the mail.Or is there any other way we can put line break in the text
    Thank you.

  • To make different colours for the columns of ALV report in Grid display.

    Hai Friends,
                       I have created an ALV report in grid display method by using the call function reuse_alv_grid_display.
    I have obtained the report.In that report i want to change the colour of each column.Plz provide the answer with a sample program.
                    Thank u.

    hi i had a program  for the rows with diff colors....do the same thing for the columns..
    REPORT  zdemo_alvgrid                 .
    TABLES:     ekko.
    type-pools: slis.                                 "ALV Declarations
    *Data Declaration
    TYPES: BEGIN OF t_ekko,
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      statu TYPE ekpo-statu,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      netpr TYPE ekpo-netpr,
      peinh TYPE ekpo-peinh,
      line_color(4) type c,     "Used to store row color attributes
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko TYPE t_ekko.
    *ALV data declarations
    data: fieldcatalog type slis_t_fieldcat_alv with header line,
          gd_tab_group type slis_t_sp_group_alv,
          gd_layout    type slis_layout_alv,
          gd_repid     like sy-repid.
    *Start-of-selection.
    START-OF-SELECTION.
    perform data_retrieval.
    perform build_fieldcatalog.
    perform build_layout.
    perform display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
          Build Fieldcatalog for ALV Report
    form build_fieldcatalog.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order'.
      fieldcatalog-col_pos     = 0.
      fieldcatalog-outputlen   = 10.
      fieldcatalog-emphasize   = 'X'.
      fieldcatalog-key         = 'X'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'EBELP'.
      fieldcatalog-seltext_m   = 'PO Item'.
      fieldcatalog-col_pos     = 1.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'STATU'.
      fieldcatalog-seltext_m   = 'Status'.
      fieldcatalog-col_pos     = 2.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'AEDAT'.
      fieldcatalog-seltext_m   = 'Item change date'.
      fieldcatalog-col_pos     = 3.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material Number'.
      fieldcatalog-col_pos     = 4.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MENGE'.
      fieldcatalog-seltext_m   = 'PO quantity'.
      fieldcatalog-col_pos     = 5.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Order Unit'.
      fieldcatalog-col_pos     = 6.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'NETPR'.
      fieldcatalog-seltext_m   = 'Net Price'.
      fieldcatalog-col_pos     = 7.
      fieldcatalog-outputlen   = 15.
      fieldcatalog-datatype     = 'CURR'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'PEINH'.
      fieldcatalog-seltext_m   = 'Price Unit'.
      fieldcatalog-col_pos     = 8.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    endform.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
          Build layout for ALV grid report
    form build_layout.
      gd_layout-no_input          = 'X'.
      gd_layout-colwidth_optimize = 'X'.
      gd_layout-totals_text       = 'Totals'(201).
    Set layout field for row attributes(i.e. color)
      gd_layout-info_fieldname =      'LINE_COLOR'.
    endform.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
          Display report using ALV grid
    form display_alv_report.
      gd_repid = sy-repid.
      call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program      = gd_repid
                is_layout               = gd_layout
                it_fieldcat             = fieldcatalog[]
                i_save                  = 'X'
           tables
                t_outtab                = it_ekko
           exceptions
                program_error           = 1
                others                  = 2.
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    endform.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
          Retrieve data form EKPO table and populate itab it_ekko
    form data_retrieval.
    data: ld_color(1) type c.
    select ebeln ebelp statu aedat matnr menge meins netpr peinh
    up to 10 rows
      from ekpo
      into table it_ekko.
    *Populate field with color attributes
    loop at it_ekko into wa_ekko.
      ld_color = ld_color + 1.
    Only 7 colours so need to reset color value
      if ld_color = 8.
        ld_color = 1.
      endif.
      concatenate 'C' ld_color '10' into wa_ekko-line_color.
    wa_ekko-line_color = 'C410'.
      modify it_ekko from wa_ekko.
    endloop.
    endform.                    " DATA_RETRIEVAL
    regards,
    venkat

  • FXML - Line break for text-attribute (LABEL)

    Hi!
    How to define a text with a line break for a label in FXML?
    For example, I cant get this to work (\n):
    <Label text="Break\nLine"/> Thanks,
    Jörn

    Hi,
    If you use SceneBuilder Developer Preview 1.1 you will see that SceneBuilder generates this:
       <Label layoutX="266.0" layoutY="172.0" text="Break&#10;Line" />To enter a new line in a text label in SceneBuilder is easy (even though a bit hidden).
    If you hover the mouse over the label text property in the Inspector (right hand side), you will see a little cog menu fading in. If you click on it - you will be able to 'Switch to multi-lines mode' - you can then enter a text with new lines - then save the file and see how it's been handled...
    hope this helps,
    -- daniel

  • Line break for code postings

    Hi there,
    normally the forum software does insert automatically a line break for text posting. If i write a
    code posting with the {code} parameter, it does not do like that. Sometimes the posts runs
    out of the displayed field.
    It is a bug or wanted ?
    Regards Steffen

    Thanks.
    But now, I have a syntax error.
    BEGIN OF xml_line,
              data(256) TYPE x
    END OF xml_line.
    DATA: lt_xml_table      TYPE TABLE OF xml_line,
          ls_xml_table      TYPE xml_line.
    LOOP AT lt_xml_table INTO ls_xml_table.
        CONCATENATE ls_string cl_abap_char_utilities=>cr_lf INTO ls_string.
        MODIFY lt_xml_table FROM ls_xml_table INDEX sy-tabix.
        CLEAR : ls_xml_table, ls_string.
      ENDLOOP.

  • I need to find all XML elements and add a line break to the text of each of them

    I need to find all XML elements and add a line break to the text of each of them.
    Is this possible with a script?

    I need to go from this ...
    to this...
    but looking for the XML elements (not paragraphs) and then adding text ...
    Thanks for your attention !!!

  • Same material can exist on multiple line items for the same order.

    Hi
    Is there any specific customising setting or web shop setting through which we can restrict user to add same material on multiple line items for the same order ?
    Regards

    No.
    But if this is a must requirement, you can do an elaborate check during order save in ORDER_SAVE BAdI and return error. So, it will be only during order save.
    Eawar Ram
    http://www.parxlns.com

  • "I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library.  Can't find it.  Thanks

    "I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it."  Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns.  Trouble is, I can't find a Musi Folder or icon in my user library.
    Any help would be appreiated.  OSX 10.9.2  iTunes version 11.1.5  Thanks!!! CW!

    From the iTunes menu bar try View>Show View Options.  Make sure what you want to see is checked and what you don't is unchecked.  You can do this (may need to do this) for any playlists, your main Library, etc.
    Good luck
    srb

  • Is it possible to create the ALV output with dropdown list for the columns

    Hi forum experts,
                              Could the ALV output contain the dropdown list for the column names? if yes, then how we can acheive this to happen.
    Thanks in advance,
    Regards,
    Samad.
    Edited by: Samad arif on Aug 21, 2009 4:40 PM

    Hi Arif,
    Yes we can .FOr the codding check the article,
    [dropdowns in ALV|https://wiki.sdn.sap.com/wiki/display/Snippets/DropdownsinALV]
    regards,
    Archana
    Edited by: Archana Kumari on Aug 21, 2009 1:22 PM

  • WHT - No unpaid tax lines exist for the given selection criteria

    Before going to execute Create remittance challan J!INCHLN ,
    i entered all the mentioned  parameters and  try to save but  i got error message  as follows
    No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line  &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updating. Check the entries.
    Procedure
    Check entries in table WITH_ITEM for the open tax items chosen for clearing.

    Hi,
    Please check for
    1. Section code/ Business place updated even in the tax lines of the document and not just the vendor line item.
    2. Check if there is a buzei mismatch between with_item table entries and bseg entries for the documents that are being pulled during the challan creation. If there is a Buzei mismatch, then please run the program in the note :885213 and then rerun the challan .
    3. Please check the note :1465529 . This is the consulting note for j1inchln.
    Hope this helps.
    Thank You.
    Regards,
    Anushya

  • No unpaid tax lines exist for the given selection criteria while+J1inchln

    Hi All,
    While doing J1inchln I am getting following error.
    No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.I have already updated Business Place and Section code while doing FB60.But still I am getting the same error.
    I have already updated Business Place and Section code in the entry while doing FB60 but error is coming. Please advise.
    Regards,
    Abhinav Sharma

    Hi ,
    Kindly go through the note no. 1465529 , which is a consulting note on J1INCHLN .
    It would resolve your query .
    Regards ,
    Dewang T

  • No unpaid tax lines exist for the given selection criteria.

    Hi
    at the time of remittance challan,getting following error:
    No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line  &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.

    Hi,
    It may cleared Manual posting at the time of posting.  If manual clear postings reverse and do through J1INCHLN only.
    and check the Date range for selection criteria.
    Regards,
    Kishore

  • Line items for the PO are not automatically displayed

    Hi all,
    When attempting to post an invoice against PO, the line items for the PO are not automatically displayed. When we went to the Listing of PO's and brought this up, we noticed under the "invoice"tab that the: Invoice Receipt & GR-BsdIV is checked.
    need your help
    Thanks
    Fayaz

    Hi,
    Can you check delivery complete indicator in PO. It is in PO item details delivery tab.
    In MIRO transaction, select the  tab Purchase order/scheduling agreement, enter PO number and press enter.
    Right hand side select the layout all information .
    Regards,
    Chandra

  • Alias name for the column name in Prompt

    Hi,
    I have a scenario where I am taking column names into prompt. I have used the following SQL in the SQL results under "Show" option of the Prompt.
    SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By OrderDate"' END FROM " Real Time"
    UNION ALL
    SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By ShipDate"' END FROM "Real Time"
    My problem here is I am getting the column names into the Prompt as "Orders"."By OrderDate" and "Orders"."By ShipDate", which is not acceptable and readable for mat for the user. Is there any way that I can assign an alias name for the column name such as OrderDate and ShipDate in the above SQL.
    Your quick respose is appreciated.
    Thanks,
    Rama

    hi,
    try an alternative one....in your administrator make new columns with alias to ones you want...so you wiil be able to show whatever you want.
    Otherwise,is it possible to show
    SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By OrderDate"' as "xxxxxxxxxxxxx"END FROM " Real Time"
    UNION ALL
    SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By ShipDate"' as "yyyyyyyyyyyyyyyy"END FROM "Real Time"
    Ending,you want the data from your columns?or just the name??
    hope i helped...
    http://greekoraclebi.blogspot.com/

Maybe you are looking for

  • New iMac plan...look OK?

    I currently have an early 2008 24" iMac. I am upgrading to a BTO 27" iMac that should be shipping shortly - except for memory (stock 4GB only), it has the top available specs including 3.4Ghz quad core i7 with 2TG HD and 256GB SSD and 2GB graphics ca

  • Report Painter - Income Statement Report

    Hi SAP Experts, I'm trying to enhance an existing Income Statement Report (table GLPCT) by adding the PLAN (table GLPCP) columns. Right now, PLAN columns has no data when I execute it. Report Layout: Profit & Loss   ACT-2007 ACT-2006  PLAN-2007 PLAN-

  • Cannot open email in outlook web app. cannot re-open firefox because it doesnot completely close. uninstalled and re-installed several times.

    I cannot open emails in my university's Outlook Web App. I cannot re-open Firefox after I exit because it doesn't really close down (parts still in Task Manager which I have to end before firefox reopens.). I have downloaded installed and re-installe

  • Call HTTP POST Service from SOA HTTP Binding (one - way)

    Hi All Why doesn't HTTP Binding support one-way Reference (It only allows request-response in outbound mode)? I need to call a one way HTTP post service from BPEL. How can i achieve this with HTTP-Binding. This one way HTTP POST service is on OSB. Pl

  • Can VISA create a TCP listener?

    I know the TCP primitives allow me to create a TCP listener, but can VISA do the same thing?  I have an application which will communicate over serial or TCP.  I need to be able to programmatically switch between the two, and so would like to use the