Line Graph - Lines

Hi all,
I have a line graph - defined as custom. The line graph has lines that are not wide enough to be visible from a distance. Does anyone know how to make the lines wider?
Thank you,
Michelle

Thank you Jeremy. The concerns you listed are valid.
When 12.1 is available and we upgrade the thicker line will be great. We are currently on 12.0.
Unfortunately we have a newer installation of MII.   That means, we are still in the "prove it" stage.   We purchased a huge monitor. (I'm not sure of the size anymore.) That monitor is mounted above the lines on the shop floor. The object is to give immediate information to the line on performance.   The graph shows the amount of "bottles" that go thru the line every 15 minutes. It is automatically updated.   There are 3 lines. One for the upper limit, one for the lower limit, and one for the current produced.   This gives them a nice picture, if only they could see the lines.
I added line marks - they didn't like that because the graph became too messy.   So the solution appeals to me. With the future enhancements to MII we can go back and change the graph later. I'll put it in our enhancement list.
Our production area is very positive on getting something new for themselves.   Our executives get the high level. The people on the floor get the instant information.   I want to keep that enthusiasm going.

Similar Messages

Line Graph - Line Width

i am having line graph with 2 lines . lines are coming thicker by default i want to make one of the line in my graph thinner. how can i do that below is my graph xml
chart:
<Graph seriesEffect="SE_AUTO_GRADIENT" graphType="LINE_VERT_ABS" graphicAntialiasing="true">
<LegendArea visible="true" />
<Title text="Center Growth" visible="true" horizontalAlignment="CENTER">
<GraphFont bold="true" italic="false" underline="false" />
</Title>
<SeriesItems>
<Series id="0" color="#0000FF" />
<Series id="1" color="#FF0000" />
</SeriesItems>
<O1Title text="Weeks" visible="true" />
<Y1Title text="Attendances" visible="true" />
<LocalGridData colCount="{count(xdoxslt:group(.//G_2, 'FWN'))}" rowCount="2">
<RowLabels>
<Label>RSum V</Label>
<Label>RSum</Label>
</RowLabels>
<ColLabels>
<xsl:for-each-group select=".//G_2" group-by="FWN" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Label>
<xsl:value-of select="current-group()/FWN" />
</Label>
</xsl:for-each-group>
</ColLabels>
<DataValues>
<RowData>
<xsl:for-each-group select=".//G_2" group-by="FWN" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/RSUM2[.!=''])" />
</Cell>
</xsl:for-each-group>
</RowData>
<RowData>
<xsl:for-each-group select=".//G_2" group-by="FWN" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/RSUM1[.!=''])" />
</Cell>
</xsl:for-each-group>
</RowData>
</DataValues>
</LocalGridData>
</Graph>
please let me know i what is the code i need to add to make my line line thinner.
i checked line style but it didn't help..

is it possible to control line width in line graph.i tried to look for the option to control the width of lines ,not able to find anything on this.

Line graph - lines position

Hi,
I have two lines in Line graph which represents current and previous years data. I have configured Style and conditional Formatting , and mentioned Positions as
1 Current
2 Previous year
but while displaying lines , sometimes current year line is overlapping previous year line and previous year line overlapping current year.
Can we make current year line to be always displayed at the top layer?
Thanks,
Hesh

Hi All,
I would like to hear from the folks who already had such problem. I want to confirm my client whether its an issue in OBIEE or I need to do something else from my side to get this done.
I highly appreciate any help on this.
Thanks,
Hesh

3d line graph: Line not visible

How come the line is only visible when the user click on the 3D graph?
The attached VI load some data into the 3D graph but it's not visible.
When the user click on the 3D graph, the line shows up
From the moment the mouse button is released the line disappears
What am I doing wrong??
Thanks for your reaction!
I'm using LV 8.6
Attachments:
Trial-3DLine-002.vi ‏39 KB

Who programmed the CW 3D graph control???
Since the Caption & Label properties didn’t act as expected, I connect a control to each of them to play with.
This is what I found out:
Caption color: doesn’t influence the graph at all
Caption Opposite visible: Ok
Caption visible: Ok
Caption font size: doesn’t influence the graph at all
Caption text: Ok
Grid color: doesn’t influence the graph at all
Grid visible: Ok
Label Color: doesn’t influence the graph at all
Label Opposite Visible: Ok
Label Visible: Ok
Label Font size: The size of the Caption is changed !!!!
Tick Color: Ok
Major Tick visible: Ok
Minor tick visible: Ok
Major tick count: Ok
Minor tick count: Ok
Range Autoscale: Ok
Range maximum: Ok
Range minimum: Ok
I’m sorry but did I pay for that ?? ??
Attachments:
Trial-3DLine-004.vi ‏48 KB

How can i dynamically vary the color of one graph line

I was looking on the developer zone and noticed several people are looking for a way to change the color of one graph line. Simplest case I would like to know: a graph is running, then you press a button and from that point on the color of the graph changes, but doesnt change the old data line color. THis way the line will consist of different colors.
The property node changes the whole line, and the line is always just one color. It should be possible to make the line consist of different color sections, anyone know how?

The application is actually not as slow as it seemed, i had some settings set wrong (anti aliasing in plot, and some functions in advanced, when you right click on the graph)
Especially unchecking the anti-aliasing makes it much faster
Also, just plotting point and not a line, or alternatively, changing the interpolation makes it faster.
Anyway, the attached files do not rely on processor so much anymore, see for yourself
Attachments:
multicolor_looking_plot.vi ‏99 KB
multicolor_looking_plot_2.vi ‏105 KB
multicolor_looking_plot_3_truncated_array.vi ‏99 KB

How to draw cumulative line graph over the stacked bar chart?(SSRS)

Hello,
I need your help to draw a cumulative line graph over this bar chart.
I need your help to draw a cumulative line graph over this bar chart in SSRS.
The dimension (Category Group) is "Hour" in this case. and expression is sum of two distinct values like 'Y' and 'N' in Activity column(Series Groups). The sum(Activity=Y) in green color and sum(Activity='N') in Red color.
I require to draw a cumulative line graph in this same chart, that should give the result of cumulative Sum(Activity) for each hour?? I mean sum of (Y+N) for each hour and that should be cumulative over the hour.
I mean sum of (Y+N) for each hour and that should be cumulative over the hour.
SSRS Version details:
Microsoft SQL Server Reporting Services Designers
Version 10.50.1600.1
--Siva

Hi Siva,
It seems that you need to verify your email address to post images, etc
Besides, Microsoft® SQL Server™ 2008 Reporting Services: Step by Step is a good choice to you. With STEP BY STEP, you work at your own pace through hands-on, learn-by-doing exercises. A companion CD includes data sets and sample code. You can download
it from this link http://my.safaribooksonline.com/9780735626041 Click the Extras, you can get the samples and database from Supplemental Content.
And there are vast of valuable articles and SQL Server Reporting Services Books Online in MSDN ,you can click these link to begin your learning journey, SQL Server Reporting Services 2008 Books Online:
http://msdn.microsoft.com/en-us/library/ms159106(v=SQL.100).aspx
Besides these, there are still many valuable videos in Microsoft Webcast, click this link
https://msevents.microsoft.com/cui/SearchDisplay.aspx?culture=en-US#culture=en-US;eventType=0;sortKey=;sortOrder=;pageEvent=false;hdnInitialCount=;searchcontrol=yes;kwdAny=Reporting%20service to register with a windows live ID, then download the ones you
want.
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

How to create static line in line bar graph in obiee 11g?

Hello,
I have requirement where user wants to see a line in bar graph.
Now the line is just static line, we dont have data field available to draw the line in graph.
is there a way to create a static line in chart and show it in Line bar ombo graph??
Thanks in advance..

e.g. i created the static line '10' in fx and now using this column as line in line bar report , but its not displaying the line at measure of '10' in chart.
Drag the column to measures section of graph (Line - Vertical Axis) to change this static value create an edit box prompt and pass the value to the column using Presentation Variable (as said by Fernando)
Thanks,
Saichand

Help needed in plotting Line Graph!!!!!!!!!Pls help!!

Hi, i need help in plotting a simple line graph showing the x&y axis and has to plot 3 different lines in the same graph.I have written a program and i need to implement this graph in it.Is there any tutorial for plotting line graphs,i mean steps included.
Please help!

You describe your need, but not where it originates from.
Is it a programming assignment? If so, I hope this is not your chosen major, as you will fail because you are a non-resourceful plagarist.
Do you need to simply graph some data? Use an existing package. There are free ones somewhere.
What do you mean "i have written a program and i need to implement this graph in it"? If you wrote the program, wouldn't you be done?
Enjoy programming

Help needed in plotting line graph!

Hi i need help in plotting a line graph complete with both axes shown,plus the legend on the side shown.
Pls help!!!!
rgds

Here's a simple line graph applet I did some time backimport java.awt.*;
public class LineGraff extends java.applet.Applet{
   double []toGraff = {6.0, -14.0, -164.0, -210.0, 108.0, 770.0,
                            1354.0, 896.0, -572.0, -1348.0, -780.0, -108.0};
   double []numsFromFile = {6.0, -14.0, -164.0, -210.0, 108.0, 770.0,
                            1354.0, 896.0, -572.0, -1348.0, -780.0, -108.0};
   int max, min, size, Hscale;
   double Vscale;
   public void init(){
      size = numsFromFile.length-1;
      java.util.Arrays.sort(numsFromFile);
      max = (int) numsFromFile[size];
      min = (int) numsFromFile[0];
      Vscale = max-min;
      Vscale = 200/Vscale;
     Hscale = Math.round(300/size);
   public void paint(Graphics g) {
      g.setFont(new Font("Arial",0,14));
      g.drawString("Example app: drawing a graph from a double array",25,18);
      g.setFont(new Font("Arial",0,10));
      g.setColor(Color.blue);
      g.fillRect(10,20,365,230);
      g.setColor(Color.cyan);
      g.drawLine(25,25,25,225);
      g.drawLine(25,140,330,140);
      g.setColor(Color.white);
      int intA = 30, intB = 0, intC = 0;
      int intD = (int) (Math.round(140 - (Vscale * toGraff[0])));
         for(int i=1; i <= size; i++) {
           intC = intA + Hscale;
           intB = intD;
           intD = (int) (Math.round(140 - (Vscale * toGraff[ i ])));
           g.drawLine(intA, intB, intC, intD);
              if(toGraff[ i ] > 0)
                 g.drawString(Double.toString(toGraff[ i-1 ]), intA+6, intB-3);
              else
                 g.drawString(Double.toString(toGraff[ i-1 ]), intA+6, intB+8);
           intA += Hscale;
      g.drawString(Double.toString(toGraff[size]), intA+6, intD-3);
}

How do I change the line color in a line graph?

I used Illustrator to create a line graph. (Not my desired option as I normally import them from R and then edit, but the textbook wanted to show that you can create graphs and edit them in Illustrator)
Anyway, I did all of the editing except that I can't change the color of the line. My assignment requires me to match the textbook example and the textbook does not provide instructions on how to do it. I've done just about any method I can think of and the line still stays light gray. I'm almost willing to just give up and lose the points but something as simple as color can't be this hard, right? Right?

Whenever I try to shift+direct select it thinks I want to move the line, so as I shift + direct select and drag my mouse across the line (to highlight it all) it moves a chunk of the line and turns it into a near perpendicular line.
I found the appearance window, it just says "Path" (the color I want it to be that it's not)
"Stroke" 4pt
"Fill" (the color I want it to be that it's not)
"Opacity": Default
And some other buttons. I think I'll try the help line tomorrow, I know I saw a customer service number somewhere and I'm only here because the chat was unavailable. This is only one of my 3 problems with my assignment so I'll search here for answers to the other two. Learning new things is rarely fun.

11.1.1.5 - Measure labels are appearing in legend (line graph)

I've created a line graph in 11.1.1.5. My legend is showing a combination of the column value and the measure name (e.g. Web Sales, Direct Sales, Retail Sales). I want my legend to simply say Web, Direct, and Retail, without the appended 'Sales' measure label.
The Measure Labels tile is currently residing in the Vary Color By (Horizontal Axis) zone, along with the legend column, so I guess it makes sense that the legend column and the measure labels would both show up in the legend (although I don't think that was the case in 11.1.1.3). However, there doesn't appear to be any place into which I can relocate the Measure Labels tile so that the word Sales DOESN'T appear on the line graph. If I move the Measures Labels tile into Graph Prompts, Sections, or Group By (Horizontal Axis), the word Sales appears in those locations. If I attempt to move that tile into the Lines (Vertical Axis) box, or into the Excluded box, it won't allow being dropped there.
Switching between line, bar, and area graphs reveals the same problem in all graph types.
Is there any way to supress the display of measure labels on graphs in 11.1.1.5?

Hi Paul,
This is the feature in 11g obiee displaying the Measue heading and dimension value... like u said right Web Sales...and so on.
Here in u case web is the value of dimension and Sales is heading of a measure.
One way is if u are not using any dimension apart from 1 dim and fact u can put measure labels in the group by axis and dimension column in the show in legend section then it will give u only web.
But if u have 2 dimension then we have to put this measure labels with either one of the dimensions in this case heading of the measure wil display.
Thanks
Subhash

Marker Shape in Legend - Line Graph

Hello,
I have recently upgraded from 10g Release 1 to 10g Release 2.
I am using a line graph. In Release 1, the data marker shapes show up in the legend. In Release 2, they don't. In Graph.xml, I have set the Graph element to have the attribute markerShapeInLegend="true".
Does anybody else have this problem and/or know of a solution?
Thank you.

Hi Paul,
This is the feature in 11g obiee displaying the Measue heading and dimension value... like u said right Web Sales...and so on.
Here in u case web is the value of dimension and Sales is heading of a measure.
One way is if u are not using any dimension apart from 1 dim and fact u can put measure labels in the group by axis and dimension column in the show in legend section then it will give u only web.
But if u have 2 dimension then we have to put this measure labels with either one of the dimensions in this case heading of the measure wil display.
Thanks
Subhash

Printing a Line Graph in SAP

Hi Experts,
Can anybody tell me how to print line graph in SAP. I do not want use ALV print function for graph generation.
Here I am attaching you sample program for your reference. Name of the program is GFW_PROG_PRES_SHOW_MULT.
Thanks in Advance.
Regards,
Shaik.

Hi Meera,
you can use FM "GRAPH_MATRIX_3D' to print graphs. See if this works out good for your.
Simple code to use this would be as follows.
DATA: BEGIN OF itab_data OCCURS 0,
dataname(15),
quantity1 TYPE i,
quantity2 TYPE i,
quantity3 TYPE i,
END OF itab_data,
BEGIN OF itab_options OCCURS 0,
option(20),
END OF itab_options.
itab_data-dataname = 'Electricity'.
itab_data-quantity1 = 55.
itab_data-quantity2 = 62.
itab_data-quantity3 = 59.
APPEND itab_data.
itab_data-dataname = 'Gas'.
itab_data-quantity1 = 35.
itab_data-quantity2 = 52.
itab_data-quantity3 = 44.
APPEND itab_data.
itab_data-dataname = 'Water'.
itab_data-quantity1 = 18.
itab_data-quantity2 = 22.
itab_data-quantity3 = 19.
APPEND itab_data.
CALL FUNCTION 'GRAPH_MATRIX_3D'
EXPORTING
col1 = 'Jan'
col2 = 'Feb'
col3 = 'Mar'
titl = 'Gráfico Teste - Carlos'
TABLES
data = itab_data
opts = itab_options
EXCEPTIONS
OTHERS = 1.
Hope this helps.
Thanks
Sumit

Transparency fill in line graph data points does not copy over to Pages

I have created some line graphs in Numbers, and they look beautiful. Since some of my data overlap and I want users to be able to easily see where all data is on the graph, I have made the data points transparent on the foremost line. This allows the other line (which data points are filled in with another color) visible "through" the foremost line.
However, when I attempt to copy the graphs into Pages, the data points of the foremost line are no longer transparent - they are filled with white. Obviously, this defeats the entire purpose of using a transparency fill!
What can I do to make this work?
Thank you,
G. Pasarescu

Hi Yvan,
Thank you for the tip. Unfortunately, I need to embed several of these charts into the Pages document, and cannot use Numbers instead of Pages for the document.
Interestingly, if I copy the chart from Numbers and paste it into some graphics programs (like Pixen and Pixelator), the transparency is preserved. However, pasting the same copy into other graphics programs (such as Seashore or Photoshop) somehow flattens the image, removing the transparency, and I'm back to square one.
Using a graphics program as the bridge between Numbers and Pages reduces the quality of the chart - that's why I'd like to try to make this work in Numbers / Pages.
Thanks,
Geoff

BI Publisher 11g. Plotting multiple lines in a line graph

Hi,
We have a requirment where we need to show multiple lines in a line graph. I have gone through the earlier posts for this topic but when I am following the same steps I am not able to resolve the problem.
I have 3 mterics: Month (which will be X-axis) , Size (Which will be on y-axis) and Name. I have names for 10 tables and i want to display 10 lines in my line graph.
In the chart generator, I am using Month in "Labels", Table name for "color" field" and size in the "values" section.
When I am trying this I am geting the following error in chart generator. It says " The data required 2 columns. The data has only 1 column." To trick the system, I also put a dummy column with static value of 1, but then also i am getting the same error, that it requires 2 columns.
the sample XML for the chart is like this:
<G_2>
<TABLE_SIZE_TRENDS>43.90832000000001</TABLE_SIZE_TRENDS>
<TABLE_NAME>Table1</TABLE_NAME>
<MONTH_NAME_TRENDS>April</MONTH_NAME_TRENDS>
</G_2>
- <G_2>
<TABLE_SIZE_TRENDS>69.62872</TABLE_SIZE_TRENDS>
<TABLE_NAME>Table2</TABLE_NAME>
<MONTH_NAME_TRENDS>April</MONTH_NAME_TRENDS>
</G_2>
It looks pretty straightforward but I am stuck in it for quite some time now.
All your guidance is greatly appreciated in this regard.
Regards,
Aakarsh

any help? still need help. thanks

Line Graph - Lines

Similar Messages

Maybe you are looking for