Line in soooo qui

Hi,
I have an external source plugged into my Audigy 2's line-in. However, the sound fcrom it is so very quiet! If I turn all volumes up I can barely hear it.
Now, this *used* to work OK before I re-installed Windows and the Audigy drivers. Since then, it has not worked very well at all.
Any help appreciated,
Andrew

armstronga,
Did you install different drivers this time, or did you use the CD? Try a full reinstall again, and then update to the latest drivers on the site. As long as everything is set up correctly in the mixer, it should be fine.
What is the source you have connected to the line in?
Cat

Similar Messages

  • Erreur 1074397125 probleme initialisation imagesessionopen.vi

    Bonjour,
    Je vous expose mon souci, je dispose d'une caméra ATMEL LV2014 reliée à un boitier SCB100 communiquant avec une carte PCI 1422.
    J'ai bien installé le driver NI IMAQ 2.6.1, la carte est donc bien reconnue.
    Lorsque j'ouvre le logiciel NI 7.0 d'acquisition, il detecte bien la carte mais lorsque je demande une acquisition d'image, il me remonte le code erreur suivant : "erreur 1074397125 - problème à l'initialisation de imagesessionopen.vi".
    Pouvez vous m'aider svp
    Merci d'avance.
    Résolu !
    Accéder à la solution.

    Merci pour ta réponse Olivier,
    C'est justement lorsque j'essaye de faire ce snap ou grab (je ne savais pas que ça s'appelait comme ça) que j'ai ce message d'erreur. Hier j'ai fait l'essai de débrancher la caméra et de relancer le grab, le message m'annonçait bien qu'il n'avait pas de périphérique IMAQ connecté.
    Il voit donc bien la caméra et la cartre semble bien être installée, mais il y a une ressource qui me bloque l'acquisition.
    Pour essayer de résumer la situation et vous expliquer le but de la manip. voici le contexte :
     - Un pc relié à la caméra linéaire (celui qui pose le problème) fait des acquisitions d'images et les transmet a un pc superviseur
    - Le pc superviseur assure le traitement d'image (Bon ou mauvais) et s'occupe de la gestion des éléments mécaniques pour trier les pièces.
    Le point ou je rame c'est que le PC superviseur a un soft spécifique développé sous VB6, celui-ci fait appel au soft spécifique du PC linéaire sous VB6 lui aussi (communication réseau en workgroup) et entre ces 2 softs il y'a des fichiers LabVIEW qui assurent la gestion d'images. Le problème c'est que je suis incapable de savoir qui appelle quoi et où quoi doit être ...
    J'ai les softs dispo si quelqu'un se sent de faire une analyse je peux lui transférer en MP ...

  • Upgrade to 40gb a month usage ?

    I want to upgrade my package from its current 10gb a month to 40gb. I am finding that with streaming audio and bbc i player etc, I am constantly going over 10gb these days.
    Now i am already on a BT package for broadband/phone/bt vision, and i only want to upgrade this one bit. I am worried if i try to upgrade i will be sent an entire new package. This is what appears to happen when i try to upgrade, so i am obviously reluctant to do it.
    Anyone have any advice how to upgrade my broadband line only ?
    Quis custodiet ipsos custodes?

    darrylgreen187 wrote:
    I want to upgrade my package from its current 10gb a month to 40gb. I am finding that with streaming audio and bbc i player etc, I am constantly going over 10gb these days.
    Now i am already on a BT package for broadband/phone/bt vision, and i only want to upgrade this one bit. I am worried if i try to upgrade i will be sent an entire new package. This is what appears to happen when i try to upgrade, so i am obviously reluctant to do it.
    Anyone have any advice how to upgrade my broadband line only ?
    If you upgrade your usage, then you will have to upgrade your broadband package. It will not effect your phone or Vision, but it will put you on a new contract with BT for your broadband. If you want a new HH as well, then I would ring them, and ask for a new HH as part of upgrading.r 

  • Why is this guys...

    my dad had an sr102 and the wireless was poor, he was getting about 26 down 9 up on his 40 connection which is connected at 40 as his line is soooo short and can support over 100 but his ping was about 13ms. so what i did was tell him to buy an openreach modem which he did and its an eci as his cabinets eci, now his ping is 20ms.... how can that be if it matches his cabinet, he also has an sr101 which i brough as my mum has the same combo on her 40 package and she gets 37 day and night wired or wireless yet no matter what my dad gets 27 wireless with the sr101 and sr102 but wired 37, there are many users in the flats he lives in so do you reckon all of them are on channels 1 and 6? even the higher channels didnt help and im sat rght next to the router. also can anyone tell me the cheapest router that supports mer, im beginning to wonder if he needs a better router all together.

    Maybe his wireless card cannot cope with higher speeds is it N-rated?Regarding ping many things can effect it and having a matching chipset is no guarentee that it will result in lower pings. If your Dads not bothered(and i assume he hasn't posted here complaining before)then i dont see what the issue is. Regarding another router if you asking us to recommend one that can fully replace either the Openreach/Sr101 combo or the Sr102 you will get no help as that would breach the T&C's and the forum rules forbid that discussion.

  • Paragraph and line break tags not working in inserted html

    I used some code found on this forum to insert a text box with a scoll bar. The scroll bar is exactly what I needed, and I figured out how to style the text (using the text option that popped up on the far right side of the options bar), but for some reason the text all runs together. The <p> </p> tag is not creating the extra lines, nor could I get extra lines with <br/>. How can I get my paragraph spacing to show up?
    Here is the forum discussion: http://forums.adobe.com/message/4514956
    Here is the code I used:
    <style type="text/css">
         .scroll {     
             padding: 10px;     
             height: 280px;
             width: 450
    0px;
             overflow-y: scroll;
    overflow-x: hidden;;
    </style>
    <div class="scroll">
        <p>Lorem ipsum dolor sit amet, consectetur adipiscing elit.
           Aliquam venenatis elit et dui scelerisque id condimentum
           tellus mollis. Phasellus varius augue at lectus egestas
           sit amet dapibus sem interdum. Vivamus aliquet augue vitae
           magna porttitor eget sagittis quam convallis. Integer aliquam
           sodales odio vel aliquet. Suspendisse non orci ut quam
           ultricies iaculis vitae vel neque. Sed sit amet neque a dui
           adipiscing convallis. Nam consectetur commodo arcu, eget
           feugiat risus tempus non. Suspendisse dignissim porta risus,
           eu lobortis metus facilisis non. Mauris id lacus eu tellus
           porttitor sodales in sed enim. Mauris euismod libero sed mi
           ultricies ac vehicula tellus tristique. Donec lacus tellus,
           varius sit amet mattis at, feugiat sed ante. Duis auctor
           iaculis aliquet. Vivamus fringilla nisi non eros congue
           dapibus. Praesent quis molestie mauris. Donec adipiscing
           dui ut elit interdum eu scelerisque sem pellentesque.
        </p>
        <p>Nulla pharetra nisl adipiscing ipsum fringilla at auctor
           ipsum posuere. Etiam ac dolor turpis. Nam non ligula purus.
           In metus nisl, ullamcorper ac sodales quis, molestie id leo.
           Etiam faucibus dui at eros molestie interdum. Quisque quis
           eros vel urna fermentum iaculis. Quisque vestibulum erat in
           risus lobortis malesuada rhoncus purus vestibulum. Integer
           vehicula ultrices quam, ac faucibus dui tristique sed. Duis
           nec felis mauris. Morbi non neque turpis, at lobortis mauris.
           Fusce a turpis sit amet leo ullamcorper semper et dignissim
           sem. Phasellus lacinia sodales massa, eget egestas velit
           malesuada at. Quisque feugiat erat in dolor eleifend ut
           convallis ante vehicula. Aenean a turpis neque, vitae eleifend
           augue. Class aptent taciti sociosqu ad litora torquent per
           conubia nostra, per inceptos himenaeos. Nunc porta, massa
           at viverra tincidunt, quam sem pellentesque felis, sed
           mattis lectus arcu eu turpis.
        </p>
        <p>Sed rutrum iaculis vulputate. Duis sed lectus lacus. Etiam
           faucibus, libero id placerat congue, turpis leo varius magna,
           vitae dapibus neque libero eu elit. Vivamus quis urna sed
           nibh elementum sodales quis in dolor. Sed ut metus ut metus
           facilisis fringilla vel sit amet mi. Etiam placerat lectus
           sed nibh bibendum vulputate non rhoncus est. Quisque vulputate
           luctus tincidunt. Duis quis tortor massa, sed scelerisque elit.
           Nam id vulputate orci. Morbi a porta lorem. Nunc elementum
           viverra sem quis blandit. Cras vel eros erat. Aliquam erat
           volutpat. Sed id odio nec erat viverra ultricies vel ac mi.
         </p>
    </div>

    For anyone else struggling with this problem, I chatted with support and got an answer. According to the agent "
    Muse is removing the default margin for various tags including the <p> tag to reset default styles to achieve consistency and control. All you need to do is specify the margin:1em for p tags in CSS to fix this."  Another --simpler-- solution turned out to be another suggestion the agent made: "just place <p> </p> after every closing </p> tag." The &nbsp is what turned out to work for me. Now I have a way to only show a portion of the text yet still allow the reader to access more (through a scroll bar) without leaving the page.

  • Exporting large report to Excel format (90K lines)

    Hi,
    I am trying to export a 90K line report to excel format and I get that error messsage:
    Description : Une erreur d'application s'est produite sur le serveur. Les paramètres d'erreur personnalisés actuels pour cette application empêchent l'affichage à distance des détails de l'erreur de l'application (pour des raisons de sécurité). Cependant, ils peuvent être affichés par les navigateurs qui s'exécutent sur l'ordinateur serveur local.
    Détails: Pour permettre l'affichage des détails de ce message d'erreur spécifique sur les ordinateurs distants, créez une balise <customErrors> dans un fichier de configuration "web.config" situé dans le répertoire racine de l'application Web en cours. Attribuez ensuite la valeur "off" à l'attribut "mode" de cette balise <customErrors>.
    <!-- Fichier de configuration Web.Config -->
    <configuration>
    <system.web>
    <customErrors mode="Off"/>
    </system.web>
    </configuration>
    Remarques: La page d'erreurs actuellement affichée peut être remplacée par une page d'erreurs personnalisée. Pour ce faire, modifiez l'attribut "defaultRedirect" de la balise de configuration <customErrors> de l'application, de sorte qu'il pointe vers une URL de la page d'erreurs personnalisée.
    <!-- Fichier de configuration Web.Config -->
    <configuration>
    <system.web>
    <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
    </configuration>
    I believe it is a timeout problem. Any idea how work around this?
    Thanks,

    I don't have the right to create reports. With those datas, I need grouping them filtering them, commenting them, creating TCD and distributing it. I believe it is easier exporting it and handle it. Also I don't want the data changing from day to day.
    Then you are foobar'ed.
    there is nothing more you can do it the SSRS export feature is not working for you, and you don't have access to the CM12 db and you can't create report. There are no other option to access the data.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • How to customize the File Adapter to put the header line in a variable?

    I have a file in which the first line contains the number of records contained by the file itself.
    Like this:
    4
    record1
    record2
    record3
    record4
    where each record is a delimited list of values
    I need to validate that the records are actually 4.
    in the documentation of the File Adapter I see that you can declare the first line as "header", but I have the impression that in this case it would be simply ignored, and not stored in a variable for later use......
    Is this correct?
    Any trick or workaround?
    thank you soooo much!

    it worked like a charm,
    here is the XSD I have used:
    http://www.javamonamour.org/2010/12/soa-sutie-file-adapter-parsing-complex.html
    ( I don't seem to be able to display correctly XML in this post :o( )

  • Premiere Pro CC-MediaEncoder : Reglage de sequence (composite en couleur linéaire) ?

    Bonjour, bonjour,
    Quelqu'un serait-il me dire à quoi sert cette option ?
    Reglage de sequence> composite en couleur linéaire (accéleration GPU ou qualité de rendu max, néccessaire) ??
    Je me demande si le fait que mon média encodeur me tape des 6 H d'encodage pour encoder une vidéo de 17mn qui ne comporte pas d'effet ne viendrait pas de là ?
    Vu que je ne sais pas à quoi sert cette option.
    Ahmotiond
    Hello, hello,
    Someone would tell me what is this option?
    Setting sequence> composite linear color (or GPU acceleration rendering quality max neccessary)?
    I wonder if the fact that my media encoder takes me 6 H encoding to make a video of 17mn which has no effect does not come from there?
    Since I do not know what is this option.
    Ahmotiond

  • Fonction sketch and line art

    Qui à des informations sur la fonction sketch and line art se trouvant dans le menu objet des dernières version de CC ???
    Google et l'aide illustrator ne sont pas avares en info sur cette fonctionnalité passé sous silence...

    Après recherche et déduction personnelle. Une fois l'application Adobe Sketch installée sur votre tablette et un jolie dessin effectué, une fonction "envoyé vers Illustrator" est disponible dans les menu de partage en haut à droite. Illustrator  sur votre pc/mac devrait s'ouvrir sous vos yeux ébahis et devrait faire apparaître votre dessin dans un format non vectoriel. La fonction sketch and line art permet de la vectorisé (la vectorisation dynamique n'étant pas possible pour ce type d'élément apparemment)
    J'espère que ca pourra aide quelqu'un

  • Unwanted line in DW when adding a Flash item...Help!

    Guys/Gals
    When I try to put a movie item in my Dreamweaver page, an additional line appears underneath - that I do not want.
    See this page:
    http://perryautolaval.com/autoaboutfr.php
    right under the flash banner, a grey lines appears.
    It should look like:
    http://perryautolaval.com/autoproducteng.php
    See?
    Help!!!
    Here are my codes:
    <? include('includes/include.inc.php');?>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
    "http://www.w3.org/TR/html4/loose.dtd">
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
    <title>Perry Automobile</title>
    <script language="JavaScript" type="text/JavaScript">
    <!--
    function MM_preloadImages() { //v3.0
      var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
        var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
        if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
    function MM_swapImgRestore() { //v3.0
      var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
    function MM_findObj(n, d) { //v4.01
      var p,i,x;  if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
        d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
      if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
      for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
      if(!x && d.getElementById) x=d.getElementById(n); return x;
    function MM_swapImage() { //v3.0
      var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
       if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
    //-->
    </script>
    <style type="text/css">
    <!--
    /*body {
        margin-top: 0px;
        background-image:  url(images/auto/autointeriorpage_01back.jpg);
    -->
    </style>
    <link href="css/styles" rel="stylesheet" type="text/css">
    <link href="css/styles.css" rel="stylesheet" type="text/css">
    <style type="text/css">
    <!--
    .style1 {    font-family: Verdana, Arial, Helvetica, sans-serif;
        font-size: 12px;
    -->
    </style>
    </head>
    <body onLoad="MM_preloadImages('images/lapping/interiorpage_02ro.jpg','images/lapping/interiorp age_03ro.jpg','images/lapping/interiorpage_04ro.jpg','images/lapping/interiorpage_05ro.jpg ','images/Performance/perfinteriorpage_02frro.jpg','images/Performance/perfinteriorpage_03 frro.jpg','images/Performance/perfinteriorpage_04frro.jpg','images/Performance/perfinterio rpage_05frro.jpg','images/auto/autointeriorpage_02ro.jpg','images/auto/autointeriorpage_03 ro.jpg','images/auto/autointeriorpage_04ro.jpg','images/auto/autointeriorpage_05ro.jpg')">
    <table width="100%" border="0" cellpadding="0" cellspacing="0" class="">
      <tr>
        <td background="images/auto/autointeriorpage_01back1.jpg" style="background-repeat:repeat-x;"><table width="779" border="0" align="center" cellpadding="0" cellspacing="0">
          <tr>
            <td><table width="779" border="0" cellspacing="0" cellpadding="0">
              <tr>
                <td width="65"><a href="autofr.php" target="_parent" onMouseOver="MM_swapImage('Image15','','images/auto/autointeriorpage_02frro.jpg',1)" onMouseOut="MM_swapImgRestore()"><img src="images/auto/autointeriorpage_02fr.jpg" name="Image15" width="65" height="74" border="0"></a></td>
                <td width="139"><a href="autoaboutfr.php" target="_parent" onMouseOver="MM_swapImage('Image16','','images/auto/autointeriorpage_03frro.jpg',1)" onMouseOut="MM_swapImgRestore()"><img src="images/auto/autointeriorpage_03fr.jpg" name="Image16" width="139" height="74" border="0"></a></td>
                <td width="146"><a href="autoproductfr.php" target="_parent" onMouseOver="MM_swapImage('Image17','','images/auto/autointeriorpage_04frro.jpg',1)" onMouseOut="MM_swapImgRestore()"><img src="images/auto/autointeriorpage_04fr.jpg" name="Image17" width="146" height="74" border="0"></a></td>
                <td width="93"><a href="autocontactfr.php" target="_parent" onMouseOver="MM_swapImage('Image18','','images/auto/autointeriorpage_05frro.jpg',1)" onMouseOut="MM_swapImgRestore()"><img src="images/auto/autointeriorpage_05fr.jpg" name="Image18" width="93" height="74" border="0"></a></td>
                <td width="336"><img src="images/auto/autointeriorpage_06.jpg" width="336" height="74" border="0" usemap="#Map"></td>
              </tr>
              <tr>
                <td colspan="5"><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0" width="779" height="198">
                  <param name="movie" value="images/flash/auto-eng.swf">
                  <param name="quality" value="high">
                  <embed src="images/flash/auto-eng.swf" quality="high" pluginspage="http://www.macromedia.com/go/getflashplayer" type="application/x-shockwave-flash" width="779" height="198"></embed>
                </object></td>
                </tr>
              <tr>
                <td colspan="5" bgcolor="#000000"><img src="images/auto/menubannerfr.jpg" width="779" height="54" border="0" usemap="#Map2">
                  <map name="Map2">
                    <area shape="rect" coords="27,7,384,50" href="performancefr.php" target="_parent">
                    <area shape="rect" coords="482,1,744,47" href="lappingfr.php" target="_parent">
                  </map></td>
              </tr>
              <tr>
                <td colspan="5"><table width="100%" cellspacing="0" cellpadding="0">
                     <?
             $page_name=basename($_SERVER['PHP_SELF']);
                $sq="select * from gws_event where event_type='Perry Auto' order by id desc limit 0,1";
                $rs=mysql_query($sq) or die(mysql_error());
                $line=mysql_fetch_array($rs);   
                ?>
                  <tr>
                    <td width="204" valign="top"><? include('left-nav-fr.php'); ?></td>
                    <td valign="top" class="contentarea"><table width="100%" cellspacing="0" cellpadding="0">
      <tr>
        <td><img src="images/anotresujet.jpg" alt="About Us" width="367" height="36"></td>
      </tr>
      <tr>
        <td><p align="justify" class="style1">L&rsquo;histoire du magasin Perry Pi&egrave;ces d&rsquo;Autos Laval est celle d&rsquo;une passion pour les voitures et la m&eacute;canique. </p>
          <p align="justify" class="style1"> Perry Wener, propri&eacute;taire de ce magasin sp&eacute;cialis&eacute; dans la vente de pi&egrave;ces de remplacement et de produits d&rsquo;entretien pour v&eacute;hicules automobiles, travaillait les &eacute;t&eacute;s durant ses &eacute;tudes comme repr&eacute;sentant sur la route pour le commerce de son p&egrave;re, Bernie Pi&egrave;ces d&rsquo;Autos. Soulignons que ce magasin de Ville-Saint-Laurent est ouvert depuis 1949. Une fois son dipl&ocirc;me d&rsquo;ing&eacute;nieur en m&eacute;canique de l&rsquo;Universit&eacute; McGill obtenu, il a discut&eacute; avec ses proches des possibilit&eacute;s qu&rsquo;il puisse devenir ing&eacute;nieur ou homme d'affaires. Afin de concilier sa carri&egrave;re et sa passion, Perry a d&eacute;cid&eacute; de s'investir &agrave; temps plein et de s'associer pour ouvrir un autre magasin &agrave; Laval. <br>
      Apr&egrave;s plus de 15 ans, Perry n&rsquo;a aucun regret et est fier d&rsquo;approvisionner les garagistes de Laval et de la Rive-Nord, et de conseiller les passionn&eacute;s de m&eacute;canique automobile qui aiment r&eacute;parer eux-m&ecirc;mes leur v&eacute;hicule. En 2008, la surface de magasin et de stockage a d&ucirc; presque &ecirc;tre doubl&eacute;e afin de r&eacute;pondre &agrave; une plus grande demande. Perry n&rsquo;est pas tout seul dans cette entreprise dynamique. Les quatre commis &agrave; votre service cumulent pr&egrave;s de 60 ann&eacute;es d&rsquo;exp&eacute;rience dans le domaine de l&rsquo;automobile! </p>
          <div align="justify">
            <ul>
              <li class="style1"> Michel Beauchamp , g&eacute;rant, 16 ans d&rsquo;exp&eacute;rience, s&rsquo;est joint &agrave; l&rsquo;&eacute;quipe en 2001. </li>
              <li class="style1"> Steve Mallette , commis de pi&egrave;ces, 11 ans d&rsquo;exp&eacute;rience, a d&eacute;but&eacute; en 2006. </li>
              <li class="style1"> Genevi&egrave;ve Matte , 6 ans &agrave; son actif, nous a rejoint en 2008. </li>
              <li class="style1"> Enfin, depuis 2008 aussi, Carl Wener est de retour dans l&rsquo;&eacute;quipe. Ancien directeur du magasin, il compte 25 ans d&rsquo;exp&eacute;rience en pi&egrave;ces de remplacement et produits de performance et comp&eacute;tition. </li>
            </ul>
            <p class="style1">Nous sommes ouverts du lundi au vendredi, de 9h &agrave; 18h, et le samedi de 9h &agrave; 13h. Nous sommes au 2273 Boul des Laurentides, Vimont/Laval, QC H7K 2J3. </p>
          </div></td>
      </tr>
      <?
      $sql="select * from gws_cms where cms_page='About Us'";
      $res=mysql_query($sql);
      $result=mysql_fetch_array($res);
      ?>
       <tr>
        <td><p> </p></td>
      </tr>
    </table>
    </td>
                  </tr>
                </table></td>
              </tr>
            </table>
              </td>
          </tr>
        </table>      </td>
      </tr>
    </table>
    <table width="100%" border="0" cellpadding="0" cellspacing="0" class="footer">
      <tr>
        <td><table width="779" height="69" align="center" cellpadding="0" cellspacing="0">
          <tr>
            <td><img src="images/auto/bottompartners.gif" width="779" height="69"></td>
          </tr>
        </table></td>
      </tr>
    </table>
    <map name="Map">
      <area shape="rect" coords="292,48,314,70" href="autoabouteng.php">
    </map></body>
    </html>

    try this
    object {
         display: block;
    in your CSS
    Martin

  • Phone line down 4 times in 4 months

    My phone line is down yet again. I dont know why I am surprized this is the fourth time its gone down in four months. Exactly the same problem every time. The broadband infinity is working fine, but the phone is kaput, although you can usually ring out no problem. But incoming calls are either not heard to ring at all on our end, although the other end may hear ringing as per normal. At our end the phone call either just pops up on the phone screen saying some has just called, or more usually it just does not register as having any calls at all.
    Also the phone itself usually announces the start of it going wrong, with a continous shrill ringing, not at all like its usual ring. With this phone you cant even individualise the phone ring at all, but even with phones that you can do this with, this ring is unlike any of those on offer. I is a continous 'fast' ringing. Not 'ring' .... 'ring'  it goes goes 'RINGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG.'  Until it is un plugged
    This has happened every month for the last 4 months.  The line was fine when i was on BT  ADSL broadband. Since i went on to infinity in the summer this has started. The first time it happened, an engineer came out after 10 days of nothing happening. He looked at the phone socket, the junction box outside our house, he tested the line all to no avail. After half an hour he said that there was a fault on our line and that he had to go to the main exchange and move our line over to another connection. After he did this we were ok for an entire month. Then it happened again next month, then the next month, and now it has started again today. Each time the line is down from 6 to 10 days.
    I would like to know how to go about getting a refund claim for the phone line. I wish we had never changed to infinity now. The internet is fine, but it just seems to have messed up our phone very badly. Has anyone else had any similar experiences. ?
    Quis custodiet ipsos custodes?

    If you would like to contact one of the UK based BT Care Team who moderate this forum, they should be able to find out what is going on, and escalate the problem.
    They can be contacted using this link BT Care Team
    They normally respond by phone or e-mail, within three working days, however you should get an immediate confirmation, with a tracking number.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Pdf reports with Line Matrix Printer

    Dear All,
    I am working with oracle reports 10g and printing my reports as pdf on Line Matrix Printer but the output isn't good so we want to know how to generate this report in character mode & can be previewed and printed

    Bonjour je m'excuse beaucoup pour poster dans un premier temps en anglais. Je ne savais pas que c'était possible en français.
    Voici mon problème: J'ai une imprimante matricielle de type EPSON LX-350 et je souhaite imprimer des fichier PDF (Adobe reader). Mais la police qu'elle sorte est différente de celle attendue après impression et pourtant avec un fichier Word ou Excel je n'ai pas ce problème de format de police. Alors la question est: est t-il possible d'imprimer sans probléme avec une imprimante matricielle un fichier PDF si oui qu'est comment doit procéder. Existe t'il quelqu'un qui l'a déja essayer et avec quelle marque d'imprimante.
    Merci de votre disponibilité.

  • Why sould the line be under my button?

    Hi.... I'm new to java...and I'm trying to implement a TicTacToe game.
    I have the following problem...I've created a JFrame and I distributed on it 9 buttons.
    I'm trying to draw the winning line on to the three winning buttons after they have been disabled...
    I'm testing the first case of wining that is on the first row of this "strange" matrix...but nothing to do. When I draw the line...a piece of it is under the final button :(
    I post here bellow my code. If anyone could help me out I would be greatful.
    Thanks in advance
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class TrisFrame1 extends JFrame implements ActionListener
              JButton a = new JButton();
              JButton b = new JButton();
              JButton c = new JButton();
              JButton d = new JButton();
              JButton e = new JButton();
              JButton f = new JButton();
              JButton g = new JButton();
              JButton h = new JButton();
              JButton i = new JButton();
              static int player=1;
              String sign;
              static switchPlayer Sign = new switchPlayer();
              static TurnofPlayer Player = new TurnofPlayer();
              static winingrules r;
         public TrisFrame1 ()
              super("TrisFrame1");
              setSize(400, 400);
              ExitWindow exit = new ExitWindow();
              JPanel surface = new JPanel();
              GridLayout square = new GridLayout(3,3,20,20);
              surface.setLayout(square);
              getContentPane().add(surface);
              surface.setBackground(Color.blue);
              surface.add(a);
              surface.add(b);
              surface.add(c);
              surface.add(d);
              surface.add(e);
              surface.add(f);
              surface.add(g);
              surface.add(h);
              surface.add(i);
              a.addActionListener(this);
              b.addActionListener(this);
              c.addActionListener(this);
              d.addActionListener(this);
              e.addActionListener(this);
              f.addActionListener(this);
              g.addActionListener(this);
              h.addActionListener(this);
              i.addActionListener(this);
              setContentPane(surface);
              addWindowListener(exit);
              public static void main (String[] arguments)
              TrisFrame1 frame = new TrisFrame1();
              frame.show();
              frame.setVisible(true);
              public void actionPerformed (ActionEvent evt)
                   Object clicked = evt.getSource();
                   JButton genericbutton = new JButton();
                   if (clicked == a)genericbutton=a;
                   else if (clicked == b)genericbutton=b;
                   else if (clicked == c)genericbutton=c;
                   else if (clicked == d)genericbutton=d;
                   else if (clicked == e)genericbutton=e;
                   else if (clicked == f)genericbutton=f;
                   else if (clicked == g)genericbutton=g;
                   else if (clicked == h)genericbutton=h;
                   else if (clicked == i)genericbutton=i;
                   sign=Sign.PlayerSign(player);
                   player=Player.turn(player);
                   genericbutton.setText(sign);
                   genericbutton.setEnabled(false);
                   genericbutton.setBackground(Color.gray);
                   genericbutton.setFont(new Font ("arial", Font.BOLD,40));
                   wins();
         public void wins()
         if (((!a.isEnabled())&&(!b.isEnabled())&&(!c.isEnabled())) && ((a.getText()==b.getText())&&(a.getText()==c.getText())))
              System.out.println ("here I'am");
    Designline();
                   if (((!d.isEnabled())&&(!d.isEnabled())&&(!f.isEnabled())) && ((d.getText()==e.getText())&&(d.getText()==f.getText())))
              System.out.println ("eccomi qui");
                   //Designline();
              // TBC with the controls for the wining cases
         public void Designline()
                        Graphics2D line = (Graphics2D) getGraphics();
                        line.drawLine(50,50,380,100);
              line.dispose();
    class ExitWindow extends WindowAdapter {
         public void windowClosing(WindowEvent e)
              System.exit(0);
    class TurnofPlayer
         int Player1;
         public TurnofPlayer()
         public int turn(int player1)
              if (player1==1)
                   Player1=2;
              else Player1=1;
              return Player1;
    class switchPlayer
         String playingsign;
         public switchPlayer()
         public String PlayerSign(int player1)
              if (player1==1)
                   playingsign="X";
              else playingsign="O";
              return playingsign;

    maybe you should disable the button as soon as the person clicks it.. I think its just a matter of the timing between when you clicked on the button, and it still having focus when you draw the line.

  • [svn] 1941: Fix bug with writing out a MorphShape2 line style when it has a fill

    Revision: 1941
    Author: [email protected]
    Date: 2008-06-04 12:13:17 -0700 (Wed, 04 Jun 2008)
    Log Message:
    Fix bug with writing out a MorphShape2 line style when it has a fill
    connected to it. Had been calling encodeMorphFillstyles() directly
    with an array of one element, but that adds a count byte (of value 1)
    which should not be there. So I decomposed new method
    encodeMorphFillstyle() out of encodeMorphFillstyles(). So not a big
    change, but lots of indentation changes.
    Other than that all changes were replacing the use of constant numbers
    with static constants from FillStyle and also adding an equals()
    implementation for FocalGradient.
    reviewed by Pete Farland, passed flex checkin tests
    Modified Paths:
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagDecoder.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagEncoder.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/types/FocalGradient.java

    Hello,
    We also have this problem ...
    We are concluded, (??) When there is a note on the first or second line that starts in the block, justification and rebuilt and the problem happens! even made to change color of text on the blank page occurs ... our solution to an extra line at the beginning of the block without note or make it past the note on the previous page ...
    when in a true solution?
    Translation from French
    Bonjour,
    Nous avons aussi ce problème …
    Nous somme arrivé à la conclusion, (???) quand il y a une note sur la première ou la deuxième ligne qui commence dans le bloc, justification et refaite et le problème arrive !!! même le faite de changé de couleur sur du texte les page blanche survient … notre solution mettre une ligne supplémentaire en début du bloc sans note ou faire passé le note sur la page précédente …
    à quand une vrai solution?
    Philippe

  • Access code for CO line

    Bonjour,
    Je suis entrain de tester un systéme UC520 avec 3 postes ip cisco. j'ai connecté le port FXO numéro 3 avec une ligne PSTN qui est déja raccordé à un autre standard simenes. le probléme c'est que lorsque je veux faire des appels à l'exterieur je dois configurer un bouton d'assignement pour chaque poste
    car il n'ya pas de prise de ligne automatique et je ne connais pas le prefixe que je dois mettre,  ce que je le connais pour les autres standards qu'il ya des access code pour chaque ligne par défaut.
    Merci

    With CCA I am not sure if you can mix CO Line and steering-digit configurations. However, it is not recommended to use the system as a "key system" anyway; it limits your design and while it is "familiar" for many small businesses it is not a great way to handle calls.
    For what its worth this can definitely be done in CLI though.
    -Dan
    Please rate useful posts.

Maybe you are looking for