Line item attributes

why we use line item attributes for account dimension

Line item detail provides a mechanism to collect detailed information about a balance in HFM.

Similar Messages

How to reset already posted GL line item attributes

Hi Experts,
I have an issue with GL line items for Bank clearing account. At the time of conversion posted the line items in bank clearing account which are not open items and also not cleared items. Now I want to make it as open items in order to clear from this account.
Please share your experiences and thoughts.
Thanks in advance.
Regards
Aditya

Dear:
What i understood from your query is. You had a Bank Clearing account which formerly was not maintained on Open item basis. However you converted it to OIM management latter on. Now you have old entries standing in this account that belongs to period before OIM was turned on .. Am i right? If this is so then answer is you can only clear those entries on Open item basis in F-03 or in any other t code for open item processing which were posted on or after OIM was turned on. This is for your information.
Regards

PCM - Conditional line items

Hi, colleagues.
We are in preparation of a small application example with PCM.
Our customer asked us to prepare a screen in which he will decide to enter
or not a "line item" into the costing process.
We already know we can do it using "line item" attributes.
Do you have any suggestion on this matter?
Regards,
Rami

Hi, colleagues.
We are in preparation of a small application example with PCM.
Our customer asked us to prepare a screen in which he will decide to enter
or not a "line item" into the costing process.
We already know we can do it using "line item" attributes.
Do you have any suggestion on this matter?
Regards,
Rami

Using AME for Line Item Invoice Approvals

I've created a Line Item AME rule for invoices, but when I initiate the invoice approval from the workbench, the system ignores the rule. I have the 'Use Approval Workflow' Payables option checked, and the rule itself is very basic:
Condition: SUPPLIER_INVOICE_LINE_QUANTITY_INVOICED is greater than or equal to 50 and less than or equal to 100
Attribute: select fnd_number.number_to_canonical(quantity_invoiced) from ap_invoice_lines_all where invoice_id = :transactionId and wfapproval_status = 'INITIATED' order by line_number
Condition Type: Ordinary
Item Class: Line Item
Action Type:
approval-group chain of authority
Action:
Require approval from Test Group 1
I've run test cases with AME and the test catches the rule and displays the approval result I'm looking for, but when I run a Real Transaction Test, the rule is ignored and the output of the test (the Focus Transaction Data section) doesn't display any Line Item attributes.
Can anyone help explain why the line item attributes are not populating in the test and why my rule is ignored?
Edited by: C.h.r.i.s P. on Jun 19, 2012 11:40 AM

Hi,
Please review the following documents and see if it helps.
Note: 333270.1 - APINV: Line Item Class Rules Error in AP with ORA-20001: The input ame_util.approverRecord2 does not belong to the header item class, as ame_api. No Errors In AME Test Tab
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=333270.1
Note: 393099.1 - Ora-20001 Error When Testing In Ame Test Tab
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=393099.1
Regards,
Hussein

FAGLL03 or in FBL3N Display of Line items by variant attributes

Hi Guru's
In FAGLL03 and in FBL3N, when I select fiscal year and posting period fields from dynamic selection and in Variant attributes under dynamic selection for fields Fiscal Year and Posting Period ,selection type S ..for type Selection variable I selected T i.e T: Table Variable from TVARVC and in Name of Variable (Input Only Using F4) I selected Variable name.
I want the line items to be displayed for fiscal Year and Period that is maintained in that Table. i.e as per our client our fiscal year is 2012 and Period is 2 , this values are there in tht table but when I select the variant in Both FBL3N or in FAGLL03 , its displaying complete details.
as a work around I have given fiswcal year and posting period manually..which is not my requirment.
I want to add this variant to a batch job so tht it will automatically pick the report with current details.
Please Suggect and help ..
Thanks in advance
Goutam

Issue is Solved.

Line Item Dimension and Navigational attribute

Hi Gurus,
Can somebody tell me how line item Dimensions and navigational attributes works technically?
What are the pros and cons for them?
Regards
Alex

Hi Alex,
You will use navigational attributes based on how you want to track and report history. Let me explain with an example.
Customer Bubba is assigned Sales Group XYZ in Jan 2007. In July the Sales Group on the Customer Master record is changed to ABC. Your are looking at the sales report.
1). If you want to see all the sales made to Customer Bubba at the time of reporting (current) then you will use navigational attributes You will create 0SALESGRP as the navigational attribute of 0CUSTOMER . Then all sales to the customer will show up under Sales Group ABC.
2). If you want to see all the sales made to the customer at the time the actual transaction occured then you will add Sales Group as a characteristic of the InfoCube. Then sales from Jan - June 2007 will show under Sales Group XYZ and from July - Present will show under Sales Group ABC.
Performance issue occurs because navigational attribute is stored outside of the dimension table of the cube and is stored in separate master data tables. So query has to perform additional table read. So essentially there are advantages and disadvantages of usng navigational attributes. It is business requirement that will drive the use of navigational attribute.
Hope this helps!!!. Please assign points.

Can "Line item dimension" have attributes?

Hi,
I understand that, Line item dimension should have only one Characteristic.
Is it allowed to have ATTRIBUTES along with it?
Thanks for your help.
Lakshmi

Hi
the only restriction of a line item dimension is that it only has one characteristic.
Of course this char can have attributes, nav or not nav.
Don't forget that a line item dimension has no dimension table has such, therefore when you'll request this char, the fact table will be systematically read.
Hoping this will help

Compound Attributes&Line item Dimensions

Hi,
Plesae can anyone expalin me about compound attributes & Line item dimensions
Thanks,
Gal

Please search...there are many threads about this in the BI forums.

Setting the value of a single attribute for multiple line items

Hi all,
I am working on a Web Dynpro application, I have created this applicaion for an accounting document so it has header data and multiple line item data. As per the requirement I have to put the following logic:
1. When a user enters a value in the field KBLNR on the line item, all the other fields like cost centerm fund, functional area should populate from a database table based on the value of the KBLNR. to get this I have put the following code:
TYPES: BEGIN OF t_kblp,
          fipos     TYPE kblp-fipos,
          kostl     TYPE kostl,
                  END OF t_kblp.
DATA lv_kblnr TYPE wd_this->element_t_bseg-kblnr.
DATA: lt_kblp TYPE STANDARD TABLE OF t_kblp,
        wa_kblp LIKE LINE OF lt_kblp,
        lt_bseg              TYPE STANDARD TABLE OF bseg,
        wa_bseg              TYPE bseg.
DATA lo_nd_t_bseg TYPE REF TO if_wd_context_node.
DATA lo_el_t_bseg TYPE REF TO if_wd_context_element.
DATA: ls_t_bseg TYPE wd_this->element_t_bseg,
        lo_api_controller    TYPE REF TO if_wd_controller,
        lo_message_manager   TYPE REF TO if_wd_message_manager,
        lo_nd_tbseg          TYPE REF TO if_wd_context_node,
         lo_el_tbseg          TYPE REF TO if_wd_context_element,
         lt_el_tbseg          TYPE wdr_context_element_set,
         lv_bseg              TYPE bseg.
lo_nd_t_bseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
    RECEIVING
      message_manager = lo_message_manager.
lo_nd_tbseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
lt_el_tbseg = lo_nd_tbseg->get_elements( ).
LOOP AT lt_el_tbseg INTO lo_el_tbseg.
    lo_el_tbseg->get_static_attributes(
                           IMPORTING static_attributes = lv_bseg ).
IF lv_bseg-kblnr NE ' '.
      SELECT belnr
             fipos
             kostl
             PSPNR
             geber
             saknr
             fkber
             grant_nbr
             gsber
             FROM kblp
             inTO corresponding fields of wa_kblp
             WHERE belnr = lv_bseg-kblnr and
                  saknr = lv_bseg-saknr.
        ENDSELECT.
lo_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
* get element via lead selection
        lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
lo_el_tbseg->set_static_attributes(
                           EXPORTING static_attributes = wa_kblp ).
   CLEAR: lv_bseg, wa_kblp.
ENDLOOP.
everything is working fine but now the problem is couple of fields that I have in wa_kblp are with different names in bseg table and hence they are not updating... I tried putting the following logic within the loop :
lo_el_t_bseg->set_attribute(
    name = `PROJK`
value = wa_kblp-pspnr ).
but it's only setting the value of the first line item and not working for the multiple line items, can you please tell me how can do this?
Thanks,
Rajat Garg
Edited by: rajatg on Jun 24, 2011 5:09 PM

Hi Chris,
I tried your code and it worked fine but after I put this code I am getting another issue. within the loop I had a code to make the fields non modifiable on the screen and was working fine but now what's happening is it's making the all the lines uneditable except the one with data on it (which is completely opposite), this is what I have coded:
LOOP AT lt_el_tbseg INTO lo_el_tbseg.
    lo_el_tbseg->get_static_attributes(
                           IMPORTING static_attributes = lv_bseg ).
IF lv_bseg-kblnr NE ' '.
SELECT belnr
             fipos
             kostl
             PSPNR
             geber
             saknr
             fkber
             grant_nbr
             gsber
             FROM kblp
             inTO corresponding fields of wa_kblp
             WHERE belnr = lv_bseg-kblnr and
                  saknr = lv_bseg-saknr.
        ENDSELECT.
move: wa_kblp-belnr to wa_bseg-kblnr,
wa_kblp-fipos to wa_bseg-fipos,
wa_kblp-kostl to wa_bseg-kostl,
wa_kblp-pspnr to wa_bseg-projk,
wa_kblp-geber to wa_bseg-geber,
wa_kblp-saknr to wa_bseg-saknr,
wa_kblp-fkber to wa_bseg-fkber,
wa_kblp-grant_nbr to wa_bseg-grant_nbr,
wa_kblp-gsber to wa_bseg-gsber,
lv_bseg-dmbtr to wa_bseg-dmbtr.
append wa_bseg to lt_bseg.
lo_nd_edit_property = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG.EDIT_PROPERTY` ).
      get element via lead selection
      lo_el_edit_property = lo_nd_edit_property->get_element( ).
      lo_el_edit_property->set_attribute(
        name = `EDIT_FIELD`
        value = 'ABAP_TRUE' ).
      lo_el_edit_property->set_attribute(
        name = `EDIT_WBS`
        value = 'ABAP_TRUE' ).
endif.
endloop.
o_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
get element via lead selection
        lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
CALL METHOD lo_nd_t_bseg->bind_table
    EXPORTING
      new_items            = lt_bseg.
Can you please see what I am doing it wrong here....

How to get Characteristic Values assigned to the line item of Sales Order?

Hi,
I want to get the Characteristic Values( Variant Configuration )assigned to First Line Item of Sales Order.
I was using the Fn. Mod.: VC_I_GET_CONFIGURATION_IBASE,
this fn. mod. giving all the Characters but not the assigned characteristic values.
Is there any other way to find characteristic values of sales order.
Thanks,
vinayak.
Message was edited by: vinayaga sundaram

For example, please see this example program.
It lists the characteristic names, the values, and the description of the values which are tied to a sales document.
report zrich_0001.
* Internal Table for Characteristic Data
data: begin of i_char occurs 0.
        include structure comw.
data: end of i_char.
data: xcabn type cabn.
data: begin of xcawn,
      atwtb type cawnt-atwtb,
      end of xcawn.
data: xvbap type vbap.
parameters: p_vbeln type vbap-vbeln,
            p_posnr type vbap-posnr.
start-of-selection.
select single * from vbap into xvbap
             where vbeln = p_vbeln
               and posnr = p_posnr.
clear i_char. refresh i_char.
* Retrieve Characteristics.
call function 'CUD0_GET_VAL_FROM_INSTANCE'
       exporting
            instance           = xvbap-cuobj
       tables
            attributes         = i_char
       exceptions
            instance_not_found = 1.
loop at i_char.
    clear xcabn.
    select single * from cabn into xcabn
             where atinn = i_char-atinn.
    clear xcawn.
    select single cawnt~atwtb into xcawn
               from cawn
                 inner join cawnt
                   on cawn~atinn = cawnt~atinn
                  and cawn~atzhl = cawnt~atzhl
                      where cawn~atinn = i_char-atinn
                        and cawn~atwrt = i_char-atwrt.
    write:/ xcabn-atnam, i_char-atwrt, xcawn-atwtb.
endloop.
Regards,
RIch Heilman

AP Line-Item Report for State Auditors

Dear Members,
I am preparing one Report named AP Line-Item Report for State Auditors and i need the following fields in my report.
Check Number                PAYR-CHECT
Voucher Number             BSEG-BELNR
Check Date                     PAYR-ZALDT
Voucher Date                     BKPF-BUDAT
Vendor Number             LFA1-LIFNR
Vendor Name                     ADRC-NAME1
Vendor Street Address     ADRC-STREET
Vendor City                     ADRC-CITY1
Vendor State                     ADRC-REGIO
Vendor Zip Code             ADRC-POST_CODE1
General Ledger Acct No     BSEG-HKONT
Purchase Order Number     BSEG-EBELN
Tax Status Code             BSEG-MWSKZ
Taxable Amount             BSEG-HWBAS
Exempt Amount             BSEG-MWSTS
Tax                                     BSEG-MWSTS
Tax Accrued                     BSEG-MWSTS
Total Invoice                      BSEG-DMBTR
I am new to FI.So I request some one please let me know which datasources contain the above fields and which CUBE is best suited for this.
Thanks in Advance for help and quick reply is much much appreciated.
Best Regards
RC

0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table.

Automatic deletion of Line item at GR level

Hi All,
I have a requirement,
The client will hire security service from the vendor, they will create service PO with 12line item and each line item cost will distribute to 5 cost center. they want a report which shows the pending quantity month wise for which month its has been delivered and pending.
So we create a Service PO with 12 line items for one year each line item will be delivered every month and service period is defined at PO level for each line item and each line item cost is distribute to 5 cost center. we are able to achieve the Report as per the client requirement.
The issue is at GR level, we can see 60 line item as we defined each line item cost is distributed to five cost center at PO level.
and we have remove 55 line item manually in GR level to receive one line item qty.
So is their any option where, we can get the line item based on the Date which we have provided at PO level.
NOTE: Client do not want from Contract process.
Thanks & Regards
Afsar

Hi,
In attributes of system Message setting for PO try to add message no.06 115 as error and assign the same to users.Moreover this message comes as a standard setting and prevents from deleting the PO line if Gr is made .But this will not restrict if MIRO is done after GR.
Dhruba

Designing the consolidated and line item report for specific material

Hi
i have a R/3-report and it run only for 7-materials.That means we need to only those 7-materials in the selection screen of report.
Then we will get each material corresponding line item details(material no, profit center, variable cost, quanity, price, financial loss(this is calculated based on quantity) , Utility Consumption(calculated based on price, variablecost) ) in one report.
Another report will give same for consolidated values of financial loss, utiliy consumption.
<b>so how can i design the consolidated and lineitem details report for each material.</b> pls let me know
kumar

0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table.

Header Details to be Printed only for the line item details.

Hi All,
I have the following requirement.
I have Page1 with the Logo, Header Window, Vendor Window, Send Invoice To, Delivere Invoice To and Main Window. Main Window Starts from the middle of the page. In the Page2 i have Logo, Header window and Main Window. In the Page3 i have only Main Window.
In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3.
The requirement is Logo,and Header Window should appear only for the Line items and not for the Terms and conditions.
For the Page1 i have given the Next Page as Page2. Suppose if there is only one line item then it Prints in the first Page itslef and the control flows to the Page2 and since in the page2 i have given the condition for the Logo and header window to print only if line item is more than 1 and since Main Window is starting from the middle there is a blank Space appearing in the start of the page.
The command i have given in the footer to trigger new page that is page3 is not getting triggered. If there are more than one line item then its printing the logo and header window and so there is no blank space appearing and it is working fine.
Please let me know how to avoid this blank space and move my main window to the start of the Page if there is only one line item.
Thank you.

Dear Vasudha,
I am a little bit confused regarding your query,
"In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3. "
When you say footer of main window does it mean , that you are using a table inside your main window and the command node your have inserted is in the footer of the table ?.I hope it is, because my suggestion is based on this assumption.
Well my suggestion for your issue is,
1.I hope you are aware we can trigger a next page in two ways, one by setting the next page static attribute & second using the command node which you have used.In your case you will have to use a combination of both.
2.I feel your First page design is ok. Set its static next page attribute to PAGE2. Similarly set the static next page attribute for PAGE2 as PAGE2 itself. This should take care of your table which you have placed in the main window. If the table contains only one lineitem it will get over in the first page itself. If the lineitems are more in the table, it will automatically triggerPAGE2 (since static next page attribute for PAGE1 is PAGE2) and the remaining line items will be displayed. Now no matter how many lineitems you have ,PAGE2 will be triggered repeatedly(since static next page for PAGE2 is PAGE2 itself) until the entire data in your table is displayed.
In this way your requirement of printing the logo and header windows for the data lineitems only will be fulfilled.
3.Now the last catch in your case is the printing of PAGE3(The terms and condition page) on an entirely new blank page.
In the footer section of the table which you have used, use a command node set to PAGE3. After the command node and under the same footer section now insert your terms and condition lineitem.
Also Check the "at End of table" checkbox and uncheck " AT PAGE BREAK" under OUTPUT OPTIONS tab for the footer section.
So now this footer section will be triggered only once after all the data in the table is displayed
4. So now if there is only one lineitem, before the default second page is triggered the command node will trigger the PAGE3 and the terms and condition will be displayed.Else if there are more lineitems the page2 will be triggered again and again and finally when all the lineitems are over, the footer of the table will get triggered. So the command node will take you to the PAGE3 wherin the terms and condition will only be displayed.
Hope this helps.
Regards,
Riju

Problem with Line Item display of G/L account

Hi,
I am struggling with a typical problem that I have two company codes in two different countries. I have created a tax account with Open Item management and Line Item display in both the company codes.
When I am trying to post vendor invoices, taxes are being posted on line item wise in one company code but not doing so in other company code eventhough the attributes of the G/L account are same.
G/L accounts, tax condition types and account keys are same in both the cases.
Can any body give me an idea to fix the problem.
thanks in advance,
Mallik

HI,
check the condition types you've defined for the both of the countries
sprofin accting-f/a gl sett-tax on sales/pur -basic settings-check cal procd--define cond types
there is a check box named item condition see whether it is ticked for the another company's condn type.
because due to this only it takes the condn item wise.
reward pts if it helps.
Regards

Line item attributes

Similar Messages

Maybe you are looking for