Line item does not exists for Good issue

Dear All,
User have created a outbound delivery and perform Post good issue.No billing document has been created yet. Somehow lineitem does not exists in the delivery document however Material Document for Good issue exists with reference to Delivery Document. I tried to reverse the delivery document with reference . No error was occured but still no reversal was updated on Delivery document. I know it is not possible to delete line item without reversal of PGI but system is showing me the status as described
Prompt response in this regard is highly appreciable
Thank you,
Nomi

Solution has been identified, If goods has been issued then Returns Process wrt Sales Order solved the problem for my rare process. Goods have been transfered to unristricted stock.
Thank you all for your support
Best Regards,
NoMi

Similar Messages

IDoc message Document or line item does not exist for invoice reference

Hello,
We activated IDoc message type FIDCC2. When cancelling documents which were created before the activation date the cancellation documents aren't posted in the receiving system. Message 'Document or line item does not exist for invoice reference' appears. How can I process these items (the reference document can't exist in the receiving system so the only option is to remove it from the IDoc?)?
Regards, Jan

This is just a guide. Adapt it to your situation. I get this kind of error message where in the case, someone has marked for deletion a line item in the purchase order. In this regard, the IDoc errors out because the line item number being referenced is marked for deletion.
You can either delete the IDoc or have the deletion flag taken off the line item number in the PO or document number to enable you reprocess the IDoc number in question.
Elias

~/oradiag_$USER/.. and "Directory does not exist for read/write" issue

Hi.
Recently I've discovered that ADR was creating a folder in one of ours Oracle 11.2.0.1 server, in the users home like ~/oradiag_$USER/.. The problem is that this logging files dont stop growning, and they are filled only with this lines:
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:41:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
etc
I've searched around internet about this issue all that I've found is a "workaround" by creating those folders. And yep, it works, it stops growning.
Then I checked the others servers that we have, and the problem replicates in some servers with the same Oracle version.
My question is: Why this? Why in some servers ADR is looking for that folder? That folder didnt exist in any of them, but only some servers tries to read/write on it (or, at least, log it) What parameter relies on it?
Regards.

Metalink note
11g Sqlnet Log Shows Error "Directory does not exist for read/write" [ID 797678.1]
Errors Filling log.xml and sqlnet.log: Directory does not exist for read/write [opt/oracle/oemagent/agent11g/log] [ID 1291286.1]

Item Conversion to GMD YIELD TYPE does not exist for the item/items in this Recipe/Batch.

Item Conversion to GMD YIELD TYPE does not exist for the item/items in this Recipe/Batch. Cannot
scale/create batch.
While auto shipping the above error i am getting. Please somebody help on this.
Thanks.

Hi,
Could you please let us know which Oracle Product was installed and it complete 5 digit version.
Regards,
Prakash.

Hierarchy INT does not exist for Financial Statement item 0glaccext

Hi,
I am facing a problem while executing the Standard Business content "Cash Flow statement" query. I am getting the message "Hierarchy INT does not exist for Financial Statement item 0glaccext".
I am not able to find this Hierarchy in the "avaialble Hierarchies from OLTP". I think this is a standard SAP Hierarchy.
Any thoughts on how to resolve this issue

John,
You can define FSVs for a specific chart of accounts, for a group chart of accounts, or without any specific assignment.
In your case, double-check whether you are running the report for the same CoA assignment that you have defined your FSV for in the first place.
As somebody's mentioned earlier, these reports are made using Report Painter (GRR1 / 2 / 3, etc.). Seems FSV = INT has been fixed in these reports for your system. You'll have to edit these reports (using GRR2) and the correct FSV.
Regards
Gulshan

Value does not exist for "..." in connection...

Hello,
I have following issue using Design Studio 1.3.
I was changed my source of dashboard from universe to Bex Query.
When it was done I have received following Script Problem related to CheckBox
Description
Location
Event Script
Component
Application
Type
Value "Sourcable" does not exist for "GP_XSRCB" in connection "cuid:AdpcHfZ9h0VKrXD0XhomzOs"
Line 3
On Click
CHECKBOX_1
[rkams1157] S2P_PROTOTYPE_MDM_001-002 - dev
Design Studio Script Problem
Below please find the Script syntax:
if(CHECKBOX_1.isChecked())
DS_2.setFilter("GP_XSRCB", "Sourcable");
else
DS_2.clearFilter("GP_XSRCB");
I would like to note that this script on CheckBox works fine based on universe as a source.
Please advice.

Dear All,
I am also facing same problem, while doing PGI (Post Goods Issue)
Can any one help in this please.
And the error message was
Characteristic value SEL F1P ADD 82947 does not exist for characteristic PAPH4 (ProdHier01-4)
Message no. KE0C133
Diagnosis
The characteristic "PAPH4" ("ProdHier01-4") should be posted to Profitability Analysis (CO-PA). When the system checked the entries, it was established that the transferred characteristic value (" SEL F1P ADD 82947") is not valid in CO-PA.
System Response
The data is not consistent and therefore cannot be transferred to CO-PA.
Procedure
With the function Maintain Characteristic Values, you can add characteristic values to those that are valid.
1. When, I check contents of table MARA-PRDHA, it contains 17 character Alphanumeric input "SEL F1P ADD 82947"
2. When, I check character PAPH4 in KEA5-->Data type was CHAR and length was 17.
3. Characterstick PAPH4 cannot be maintained using KES1.
Thanks & Regards
Sahas

Error message "Location XYZ does not exist for item1" Message no. BBP_PD047

Hi all,
When i do confirmation for PO in SRM, the system gives error message "Location XYZ does not exist for item1" when i enter Location for the plant thought the Location is mapped to Plant in ECC system. System shows error when i click on check button, it allowing me add locations.
This is happening when confirming the PO line items having differernt plants and it is not happeing all the time, sometimes it does't work. I
f all the line items have same Plants, there is no issue.
I am not able to understand why it is working some time and not working other time.(message no: BBP_PD047 in SLG1)
can some one help me in understanding this?
Thanks,
Ravi

Is this thread still valid? If not, please close the thread.
If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
Thanks
Jason
SDN SRM Moderator Team

Tax code does not exist for jurisdiction code in creating purchase order

Hello Experts,
After doing a technical upgrade from 4.6 C to ECC EHP 4 , while creating a PO , we are facing an error that
"Tax code A0 does not exist for jurisdiction code 4318702801". for one plant .
But in 4.6C, there is no problem with the field jurisdiction code in Invoice tab at the PO item level data. it allowed to create PO even with out entering jurisdiction code .
we have assigned jurisdiction code to the particular plant through config settings in T code OX10.And also we have verified the G/L account properties for the material used in creaton of PO. it will allow all tax codes.
But still we are facing the same error.
Please suggest where to establish linkgae betweeen Tax code and jurisdiction code at customize / config level.
it is very high priority issue . please suggest
regards,
Tulasi

Hi,
As tax jurisdiction code is assigned to your plant on OX10 t.code and cross check Tax code declared as input tax & assigned to company code in t.code: OBCL with tjurisdiction code.
Now double cross check Tax code created (FTXP)for your country with jurisdiction code.
Also check table A003 for entry of tax code and company code.
Regards,
Biju K

Error System "Item does not exist. It may have been deleted by another user"

Error System "Item does not exist. It may have been deleted by another user" in sharepoint 2010
This is problem show when User new item in List . User open new item page about 3 pages and User save each one page when page save complete , User will save another page.
Sometime User can not save item , it show that error
This List not have workflow and code
Please let me know what is the issue ?

Hi,
Greetings. THis is a known issue and see the links for resolution
http://support.microsoft.com/kb/972225
http://social.technet.microsoft.com/Forums/office/en-US/638e4aa0-527c-4b20-a899-a0cf181983ec/no-item-exists-at-it-may-have-been-deleted-or-renamed-by-another-user?forum=sharepointadminlegacy
Please remember to click 'Mark as Answer' on the answer if it helps you

Msg FF 718 Tax code & does not exist for jurisdiction code

Hi,
I am trying post a goods issue for a Return Delivery PO.
After entry the data, I made the consistency check and then the system show me the related message: Msg FF 718 Tax code & does not exist for jurisdiction code.
I checked the configuration about Tax on Sales/Purchases, but I did not see nothing wrong.
Anybody knows how about this message?
Thanks in advance.

Hi Demetrio,
Please refer the below mentioned OSS notes:
Note 675382 - ME31K No check on tax jurisdiction code in contract
Note 765309 - Check combination MWSKZ/TXJCD incorrect
Hope this helps,
Please assign points as way to say thanks

Loan Error : Tax code .. does not exist for jurisdiction code

Dear experts,
Please help me for below issue.
I have created a loan (using FN1V) in loan management. in this loan i have maintained and interest condition. in this interest condition i have maintained tax code - IV. After that when i try to post an interest entry using t.code - FN8D, It is showing me an error as below.
Tax code IV does not exist for jurisdiction code
    Message no. FF718
Diagnosis
    You have entered tax codes and jurisdiction codes in the G/L account
    items. The amounts of these items are used as the tax base to check the
    tax amounts you have entered or to determine the taxes. The system has
    now determined that one or more of the "tax code / jurisdiction code"
    combinations do not exist in Customizing.
System Response
    Calculation of the taxes or checking of the taxes entered had to be
    terminated.Procedure
    Check the tax codes and the jurisdiction codes in the G/L account items
    or asset items. If these are correct, inform your system administrator.
Procedure for System Administration
    Change the tax jurisdictions you specified in Customizing under
    Financial Accounting -> Financial Accounting Global settings -> Tax on
    Sales/Purchases -> Basic Settings -> Define Tax Jurisdictions.
    To do this, choose Maintain entries (F5).
Please help
Regards
Gaurav Gupta

HI Gaurav,
so what do you have in Customizing under Financial Accounting -> Financial Accounting Global settings -> Tax on Sales/Purchases -> Basic Settings -> Define Tax Jurisdictions ?
BR, Tomislav

Item does not exist. It may have been deleted by another user

Hi,
I am getting a strange issue with the error "Item does not exist. It may have been deleted by another user " with the below code which was under "RunWithElevatedPrivileges" in a application page.
public void test(int requestId)
SPList list= web.Lists["test"];
SPListItem lstItem = list.GetItemById(Convert.ToInt32(requestId)); //Error
But when I test the above code in a console application, it is working fine & I am sure the id exist in the list.
Can any one help me on this issue!
Thanks In Advance,
Kumar.

Ok.
Go to the sharepoint list and check the item with id is exist or not?
Retrieve the data using another column instead of id column.
Just for testing.
Check the below way also
SPQuery query = new SPQuery();
query.Query = "<Where><Eq><FieldRef Name=\"ID\"></FieldRef><Value Type=\"Integer\">" + id.ToString(CultureInfo.InvariantCulture) + "</Value></Eq></Where>";

Line items are not appearing for some users

Hi
In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
Regards
John.

Hi,
What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
Please clarify your issue.
Regards,
RS

Node id does not exist for the current application server id on forms

Hi,
We have a Two node RAC setup on which Oracle e-business suite R12.0.6 is setup
We have CP and DB on two RAC nodes and Forms and Web on two separate server(non-RAC)
while opening oracle forms we are getting" Node id does not exist for the current application server id "
on checking Concurrent manager logfile we founf no error, we matched Application Server id from DBC file of all the 4 nodes with application table
Fnd_nodes... which matches ( there is no mismatch of application server id) .
We have also tried commenting the application server id in dbc file and executed adgendbc.sh to regenarate dbc file but we are facing the same issue.
Also tried to clear setup with fnd_conc_clone.clean setup and again executing autoconfig on db and application tier but no result yet.
Can some one guide as to which file has this message "Node id does not exist for the current application server id "
and what could be the reason for this.
Help is appreciated.
Regards,
Milan

I already tried the mentioned metalink note id but it did not work.What did you try exactly?
Can u help out as from where am i getting the message "Node id does not exist for the current application server id" It is already mentioned in the doc referenced above -- From the dbc file under $FND_SECURE directory.
i mean from which file does the above message comes.Please clean FND_NODES table as per (How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]), run AutoConfig on the database tier then on the application tier and check then.
Thanks,
Hussein

Error: Balancing field "Profit Center" in line item 324 not filled for t-code:PC00_M99_CIPE

Hi,
Anybody can help me. when I am posting the documents for all employees for the t-code:PC00_M99_CIPE, I am getting the following error,
kindly help me.

If you define document splitting criteria based on Profit Center and if your document contains multiple line items with different profit center, this type of error will come.
To check this, Go to IMG Path -- Financial Accounting (New) --> General Ledger Accounting (New) --> Document Splitting --> Define Document Splitting Characteristics for General Ledger
There check whether the mandatory check box is selected for profit Center.
So check in your document, whether any line item does not have profit center."
thanks
G. Lakshmipathi

Line item does not exists for Good issue

Similar Messages

Maybe you are looking for