Line numbers in script

hi gurus,
         how can i print line numbers in serial in vertical in a SAP Script.
                    thanx in advance,
                            santosh.

Hi
There is no system field for writing the Numbers in Scripts like Reports.
check the table TTSXY and TTDTG if needed..
So you define some variable using DEFINE statement and based on some Item condition you have to pass varaible
/: define &VAR&
/: if &itab-posnr& eq '00010'
/ var = 1.
elseif &itab-posnr& eq '00020'
/ var = 2.
/: elseif &itab-posnr& eq '00030'
/ var = 3.
endif.
try like above and pass the numbers
or from the driver program itself keep a variable in the items internmal table and fill that field and use it in script.
<b>
Reward points for useful Answers</b>
Regards
Anji

Similar Messages

Line numbers in Script Logic editor

Hi everybody,
when using the default Script Logic editor in BPC NW I can not see any Line Numbers (or Column Numbers) in the edited script.
When an error is detected by the system after validating the script, the error message sometimes refers to a certain Line Number where the error occured.
Is there a better way than manually counting the lines from the top (which can be quite a task when editing, say 500 lines) ?
Do I miss something here or are you all using alternative editors ?
Please give me some input.
Regards.
Wolfgang

Hi Nilanjan,
thanks for the quick answer.
That would mean that I always need to switch from BPC frontend Script Editor into BW and start a transacion and program there. I would have hoped, that simole line numbers would be a standard feature in the BPC frontend editor itself. Nevertheless...
Best regards.
Wolfgang

How to insert line numbers in InDesign CS5

I am creating a document that needs to have line numbers appear every for every 5 lines of text. Using the list function, I can get a number for every line, but can't find a way to just number line 5, 10, 15, 20, etc.
All help appreciated,
Cathy

Thanks for the prompt reply, Bob, but from what I read in the comments on the script is that it inserts line numbers for every line and has no options for customizing to show numbers for only lines 5, 10, 15, etc. Also, using the list function in InDesign on selected text I can get the same result (including multi page if I select all text) and then convert the auto list numbers to text, which would allow me to remove unwanted numbers and leave just the ones I need (although that would be a painful manual process for a longer document.).
Am I missing something about the script?
I must admit that I'm shocked that this isn't a built in capability in InDesign!

[svn:fx-4.0.0] 13535: Part 1 of fixing line endings in AS and MXML files so that line numbers are correct while debugging .

Revision: 13535
Revision: 13535
Author:   [email protected]
Date:     2010-01-15 14:45:38 -0800 (Fri, 15 Jan 2010)
Log Message:
Part 1 of fixing line endings in AS and MXML files so that line numbers are correct while debugging.
We've got a widespread problem with line-endings (\r\n vs \n vs \r) because not all our files have svn:eol-style set to "native". (With this setting, the line endings are adjusted for the platform that you check out code onto. Without it, you can end up with all-Mac line endings on a Windows machine, WindowsMacUnix line endings on a Mac, etc. The goal is all-Win on Win, all-Mac on Mac, etc.)
For schedule reasons, we've decided to minimize risk by fixing only AS and MXML files in frameworks/projects that contribute to our SWCs, because here line-ending problems can throw off line numbers and the debugger doesn't step through the right lines of code.
You can't set svn:eol-style to "native" unless the line endings are already correct for your platform. Since I'm on Windows, I wrote a script to find a fix the files that had any \n or \n line endings. The files now have \r\n.
QE notes: None
Doc notes: None
Bugs: SDK-24966
Reviewer: Pete
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24966
Modified Paths:
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/core/IDeferredContentOwner.a s
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/core/ISelectableList.as
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/core/LayoutElementUIComponen tUtils.as
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/geom/CompoundTransform.as
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/geom/TransformOffsets.as
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/skins/halo/WindowBackground. as
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/utils/MatrixUtil.as
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/utils/OnDemandEventDispatche r.as
    flex/sdk/branches/4.0.0/frameworks/projects/osmf/src/org/osmf/media/MediaFactory.as
    flex/sdk/branches/4.0.0/frameworks/projects/rpc/src/mx/rpc/http/HTTPMultiService.as
    flex/sdk/branches/4.0.0/frameworks/projects/rpc/src/mx/rpc/http/Operation.as
    flex/sdk/branches/4.0.0/frameworks/projects/rpc/src/mx/rpc/http/mxml/HTTPMultiService.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/ButtonBar.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/DropDownList.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/HSlider.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/Panel.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/PopUpAnchor.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/Scroller.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/mediaClasses/Volum eBar.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/supportClasses/Dro pDownController.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/supportClasses/Dro pDownListBase.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/supportClasses/Scr ollerLayout.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/supportClasses/Sli derBase.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/effects/AnimateTransform.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/effects/supportClasses/Animat eTransformInstance.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/effects/supportClasses/MoveIn stance.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/events/SkinPartEvent.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/skins/spark/HighlightBitmapCa ptureSkin.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/skins/spark/ScrollerSkin.mxml
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/styles/metadata/AdvancedInher itingTextStyles.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/styles/metadata/AdvancedNonIn heritingTextStyles.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/utils/LabelUtil.as
    flex/sdk/branches/4.0.0/frameworks/projects/wireframe/src/spark/skins/wireframe/NumericSt epperTextInputSkin.mxml

Hi there,
I follow the help from this post
How to handle line break embeded inside CSV column
Not a perfect way, but it is accepted in my case.
Cheers,

Reg. Line Numbering to the whole activeDocument

Hi All,
I have gone through most of the sites to put line numbers to the whole activeDocument but I could find only applying the line numbers for first page.
Anybody please help me out to add line numbers to the entire activeDocument with continuos number?
Any help is greatly appreciated.
~Sathya Rani M

Hi,
Thank you for the script. This I have found earlier and this is showing demo.
I need to add numbers continuosly without any text.
Please advice.
~Sathya Rani M

Hello need vertical lines in the script

Dear ABAP GURUS,
I need to draw verticle lines in the script as a tabel, i have drawn the horizontal lines. I heard that there is the the function module to draw the verticle lines but how is that possible to use in the script. Plwase help me out in drawing the vericle lines, i Have tried using the vline but no use.

Hi Soni,
Its very easy to draw the vertical lines in a script. Use BOX statement to draw the same. Check out the syntax for BOX statement. Give the 'Y' coordinate only and do not mention 'X' coordinate. So that the box will appear as a vertical line. Check it.
Boxes, Lines, Shading: BOX, POSITION, SIZE
The BOX, POSITION and SIZE commands for drawing boxes, lines and shadowing can be used for specifying that within a layout set particular windows or passages of text within a window are to be output in a frame or with shadowing.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when outputting. Line printers and page-oriented printers not supported in the standard ignore these commands. The resulting printer output may be viewed in the SAPscript print previewer.
Syntax:
1. /: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
2. /: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
3. /: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words as a value which specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
1. XORIGIN, YORIGIN: Origin of the coordinate system.
2. WINDOW: Sets the values for the left and upper edges to be the same of those of the current window (default setting).
3. PAGE: Sets the values for the left and upper edges to be the same of those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE Command
Syntax
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
1. WIDTH, HEIGHT: Dimensions of the rectangle or line.
2. WINDOW: Sets the values for the width and height to the values of the current window (default setting).
3. PAGE: Sets the values for the width and height to the values of the current output page.
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
Thanks & regards
Kishore Kumar Maram

Debugger shows wrong line numbers in local file

I'm using the debugger in Safari 5 for a web app that is entirely made up of local files (it's actually a dashboard widget). For most files it's fine, but there are a few where there appears to be a skew between the actual line number and the line number displayed by Safari. As a result, some errors are displayed with the wrong line number (e.g. "Syntax error on line 5" when the actual line is 2). More troublingly, if I place a breakpoint in a file, it acts as if it is on the wrong line so when I step through the code the current line is actually different from the one displayed by the debugger.
The weird thing is that the line numbers displayed in the script panel are all correct, so line 47 really says "47" in the left margin, but Safari still thinks that it is line 44. In general, the skew seems to be constant and equal to -3, so the real current line when debugging is 3 lines higher than the one displayed as the current line in the debugger.

This looks to me like a Safari bug. I did some experimentation, and it appears to be caused by the use of the newer getter syntax in an object prototype. When I do this the debugger seems to set breakpoints at the wrong lines as described in my previous post:
function foo() {
foo.prototype = {
get bar() {
do_it: function() {
var baz = 1;
var obj = new foo();
obj.do_it();
If remove the definition of the bar getter or change it to use the older __defineGetter__ syntax then the problem goes away.

What is the proper way to record line numbers in Master/Detail records?

Guys and Gals,
Been thinking about this for awhile, but thought it best to ask the people who really know what they are doing.
What is the proper way to record & show line numbers in a Master / Detail record set?
For example, take Master/Detail relationship Orders and OrderItems. Orders has a column Document_Number and OrderItems has Document_Number, Line_Number. Line_Number should contain the row number 1,2,3,4 ... etc. for each row in a document.
Should I ...
<ol><li>Add a sequence and a trigger in the database? The FusionOrderDemo does this, but then the sequence never "resets" and I've got row numbers that keep incrementing. So one document has rows 4,5,6 and the next document has 7,8,9 when they should both have 1,2,3.</li>
<li>Programmatically take care of the row numbers? This seems like I'm asking for trouble. Anytime an insert or delete operation gets done, I'll have to iterate through rows and re-assign row numbers.</li>
<li>Is there a way to assign row numbers in a table iterator (or data collection?) to an entity?</li></ol>
Any suggestions would be appreciated. It's looking like #2 is my only option, but if anyone knows different I'd love the input.
Will

Thank you both guys.
As John said, I believe I'm looking for a gap-free sequence per master record.
The line number of the OrderItems table is the second half of the primary key. The first half of the primary key (DocumentNumber) is the foreign key to the Orders table.
Think of it like line items on an order or invoice. For example, if you were talking to someone on the phone concerning an invoice, you might say, "The pricing for line item #3 is incorrect." In this case, it's good to have a common reference. Or imagine a Microsoft Excel spreadsheet with no row numbers displayed! You'd never get anywhere if you had to explain something over the phone.
If this is tricky to perform, I take it using a sequence and trigger such as the Fusion Order Demo is the best way to approach the challenge for simplicity's sake?
Will

Line numbers in text area

im using the class JTextArea of the swing class to view some text documents.
How i can vies the number of lines of each document:
i want the line numbers not in the document but as a part of the text area. for example:
1:line 1
2:something
3:something
4:sjdhfskjhsl
Please help.Thanx

You can do it in two ways.
Place a JLabel on left of your Text Area, Add a KeyListener to the text area. On each ENTER key press count lines of JTextArea.getLineCount(). and paint your JLabel as well. Secondly you will need to move the JLabel as soon as the ScrollBar of JScrollPane will move.
Second way is like:
<code>
import java.awt.Toolkit;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTextArea;
import javax.swing.text.BadLocationException;
public class MyTextArea extends JTextArea{
public MyTextArea(){
super("1: ");
setCaretPosition(3);
addKeyListener(new MyKeyListener());
class MyKeyListener extends KeyAdapter{
public void keyReleased(KeyEvent e){
try{
switch(e.getKeyCode()){
case KeyEvent.VK_ENTER:
int position=getCaretPosition();
int line=getLineOfOffset(position);
insert((line + 1) + ": ", position);
changeLineNos(line);
break;
case KeyEvent.VK_BACK_SPACE:
position=getCaretPosition();
line=getLineOfOffset(position);
if(line > 0){
int cLoc=getCollonLocation(position);
int diff=position - cLoc;
if(diff <= 2){
replaceRange("", getLineEndOffset(line - 1) - 1, cLoc + diff);
changeLineNos(line);
} else{
int cLoc=getCollonLocation(position);
int diff=position - cLoc;
if(diff <= 2){
if(getLineCount() > 1){
replaceRange("", 0, getLineEndOffset(0));
changeLineNos(0);
} else{
setText("1: ");
Toolkit.getDefaultToolkit().beep();
break;
} catch(BadLocationException ex){
ex.printStackTrace();
private void changeLineNos(int lineNo) throws BadLocationException{
int total=getLineCount();
if(total > lineNo){
while(lineNo < total){
int offset=getLineStartOffset(lineNo);
int collonLocation=getCollonLocation(offset, lineNo);
replaceRange("" + ++lineNo, offset, collonLocation);
private int getCollonLocation(int offset, int lineNo) throws BadLocationException{
return getText(offset, getLineEndOffset(lineNo) - offset).indexOf(':') + offset;
private int getCollonLocation(int caretPosition) throws BadLocationException{
int lineNo=getLineOfOffset(caretPosition);
int offset=getLineStartOffset(lineNo);
return getText(offset, getLineEndOffset(lineNo) - offset).indexOf(':') + offset;
public static void main(String argv[]){
JFrame frame=new JFrame();
MyTextArea area=new MyTextArea();
frame.getContentPane().add(new JScrollPane(area));
frame.setSize(300, 200);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setVisible(true);
</code>
Regards,

How to print line numbers in NWDS for Java?

Hi everyone,
does someone know how to print out program code with line numbers from the Netweaver Developer Studio for Java? This is inevitable for code reviews.
In Eclipse 3.4 this issue is solved. Is there possibly such a patch for NWDS as well?
Thanks,
Maria

Hi Pascal,
thanks for the quick reply. The setting you mention displays line numbers on the screen alright, but printing out does not work.
We use: SAP NetWeaver Developer Studio for SAP NetWeaver 7.1 SP06 PAT0000, Build id: 200807051938.
I guess it just does not work, because it was fixed only for Eclipse 3.4, and the above NWDS version bases on Eclipse 3.3.
What do you recommend for code inspections - copy/paste into PSPad or do you know a more comfortable practice?
Greetings
Maria

How to delete a line in SAP Script

Hi,
How to delete a line in SAP Script.
Cheers
S Kumar

Okay.if still you are looking the option of deleting line there is one solution.
Just delete the all contents of perticuler(which needs to deleted) line including the tag column(Where you are /*) and save.if you see again than line would not be seen as blank,you will found it has been deleted.

How to set page numbers in scripts

Hi,
i want page numbers at bottom of page,
please tell me how to set page numbers in scripts?

Hi,
In footer
use this
&PAGE& / &SAPSCRIPT-FORMPAGES&
&PAGE& of &SAPSCRIPT-FORMPAGES&
reward if it helps..
regards,
Omkar.

Print data at new line in SAP Scripts

Hi,
Is there any way that i can print data at new line in sap scripts. I am looping my data and its printing in the same line but i need to print it at new line. Is there any formating options or any command to do that.
Thanks

Than you must take all the values from the internal table into the different variables and than print them.
In program:
READ TABLE ITAB INTO WA_TAB INDEX 1.
IF SY-SUBRC = 0.
VAR1 = WA_TAB-FIELD1.
ENDIF.
* read all the lines and fill the VAR variables
In SAPScript:
/E LINE_VAR
/P &VAR1&
/P &VAR2&
/P &VAR3&
/P &VAR4&
Regards,
Naimesh Patel

How to install adobe flash player through command line with some script

Hi Guys,
Do you know how to install adobe flash player through command line with some script?
Thanks,
Galina

Windows. I tried silent install with "install_flash_player.exe /install" but it works only with one file that I downloaded from adobe.com - "install_flashplayer10_mssd_aih.exe". But it is possible to download this last file only one time, every next time it redirects me to download install_flash_player.exe file.

How to print continue Line Numbers in PLD Differen repetitve areas.

Hi,
We need to print line numbers continues in different Repetitive areas.
Ex. Repetitve Area 0 we have item Discriptions
      Repetitve Area Footer1 we created sotvalue() here it will display servicetaxes
      Repetitve Area Footer1 we created one text roundoff
we need output like
Ex:1. Dell        **Repetitve Area 0****
      2.Mouse     **Repetitve Area 0****
      3.Laptop      **Repetitve Area 0****
      4.servicetax   **Repetitve Area Footer1****
      5.cess             **Repetitve Area Footer1****
      6.Hcess             **Repetitve Area Footer1****
      7.Roundoff           **Repetitve Area Footer1****    as a text field
for above all we need to print Line numbers sequence how we can print sequence numbers for differen areas.if i assigned Linenum( ) in Repetitve Area 0 it will display one for Repetitve Area 0 only.and i applied Gouplinenum also it's not printing. please guide me how to print this.
regds,
sampath kumar devunuri.

Hi,clint pow.
Please we did what you said but we are not retreiving data.please tell me how we can get serieal numbers for different repetitve areas.
regds,
sampath.

Line numbers in script

Similar Messages

Maybe you are looking for