Line Type Printing Problems

Dear All,
I need to plot (large formats) many PDF documents which were created from AUTOCAD.
Now I am facing two problems. One is grayscale texts which when we plot we can not read it. I already tried to go on print -> advanced -> color management -> color profile -> black & white.
Another issue is line types. All were printed as continuous line. Usually in engineering drawings we have many line types such as: hidden, phantom, etc.
My question is: the problem is the pdf file created from autocad or there is some configuration that I am not doing properly?
Please need asap help because there is lots and lots of drawings to plot!!!
Thanks in advance!
Regards,
Gilberto

I'm pretty sure it's all in how AutoCAD is creating the PDF file. But I don't use AutoCAD, and I have a hunch very few people here do.
Let's try moving this to another forum which gets more traffic.

Similar Messages

  • Printing double line in Column label Box/Table Line Type of smartform

    Hi,
    In MAIN window, in ITEM table, the header box, (where column labels are printed), one double lines r printing!! it looks like (not exactly) instead of single line (________) its printing double lines (======), so, pls. let me know, Wht culd be the reason?
    Thank you

    Hi,
    Check that if you used table borders in attributes of line types.
    And also check if you are using sy-unline...
    Regards,
    Shankar.

  • Smartform Table Line types duplicate entries problem

    Hi ,
    I am getting one strange problem in Smartforms. i tried for information in SDN but i did not get any usefull ones.
    I have created my main window with particular width. I created two different Line types. On particular condition i need use these line types.
    First line item will have 6 columns in that one column is empty.
    Second liitem will have 5 columns.
    When i am generating the output, the last item data of the first line type is repeating twice, i.e with first line type and the second line type.
    Can anyone give me the inputs to solve this.
    Thanks,
    Srinivas Bhavanam

    Did you check SAP notes?
    I don't understand what you get exactly:
    For the last line of the internal table, you would like to get this:
    A B C D E F
    G H I J K
    But you get that:
    A B C D E F
    A B C D E F
    Did I understand correctly?
    Did you use something special? (header, footer, conditions, ...)

  • Goods Receipt Note - printing problems

    Hi there
    I have a couple of issues regarding printing problems for Goods Receipt Notes.
    The 1st problem
    Only the first line item is printed on the GRN, all the other line items are omitted from the GRN.
    The 2 nd problem
    When doing a Non-stock item GRN it does not print at all.
    The 3 rd problem
    Our stock count sheet only print 300 line items at a time and it is also not in sequence.
    Another printing problem is with our picking list
    Here what happens is that instead of the picking list skipping the "perforate section" at the end of each page, it just continious printing one stroke through without any intervals.
    Then the last issue but with printing of Reservations, is that even though we have zero stock on hand, the reservations are still being printed. This causes a problem not only waisting paper, but we have to go through those lists to identify the actual reservations that can be issued.
    Please can anybody help?
    Regards
    Sonja

    in NACE Tcode
    u can Find
    choose ur application and press output type...
    select ur output type and press processing routine...
    u will find the progran name and form name..
    if it is usefull plz reward
    Regards
    Anbu

  • AP: Invoice Imports/ Miscellaneous Invoice Line types

    Hi All,
    I had two issues while I was importing my invoices in AP through AP Invoices Open interface:
    1. Freight Charges
    2. Some Unit Royality Charges.
    Both of these things are not included in my PO, so I needed to create additonal invoice distribution lines with in the same invoice and also had to assign a GL account while creating the invoices. The other Item type lines get the GL account code from PO while matching is done during AP Open Import process.
    The Freight charges problem is resolved. The solution for that is as follows for your reference.
    Functional Steps:
    1. With Accounts Payables Manager responsibility , go to
    Setup->Options->Payables.
    2. Select Invoice from drop down list box.
    3. In invoice region Ceck the Automatically Create Freight Distribution Option.
    4. Supply default Freight Account for Freight Distributions.
    Technical Steps:
    1. Create an additional Invoice distributions line for freight in AP_INVOICE_LINES_INTERFACE table which should not have the PO level information.
    2. Set AP_INVOICE_LINES_INTERFACE.Prorate_across_flag = 'Y'
    3. AP_INVOICE_LINES_INTERFACE.line_type_lookup_code = 'FREIGHT'
    4. Set AP_INVOICE_LINES_INTERFACE.LINE_GROUP_Number as same in both the ITEM and Freight Invoice distribtuion line which are interrelated.
    The above resolves the Freight issue and you can reproduce it in your environment.
    However, I have another amount from my supplier which is called "Royality Charge" on every item which are also not present in my PO. My supplier sends these charges with Invoice lines the same way Freight charges are sent. I am thinking of creating additional Invoice lines marked as "Miscellaneous" Invoice Lines type for this charge. The problem I am facing with Miscellaneous Lines is that I cannot find a place where I can setup the Account code for such Invoice distribution lines, like I got for Freight Type Distribution lines as described above in Functional steps. Can anyone guide me in this regard or can give me an alternative workaround to handle my Unit Royality Charges?
    Thanks
    Faisal .
    [email protected]
    null

    Apologies for the late response, have only just spotted the question.
    You will need to register "line-item job-level chains of approval" under payables transaction type before you can select it from the picklist:
    Setup\Action Types\"Use Existing Action Type" button, then select action type and continue.
    Hope this helps (if you haven't already resolved yourself)
    James

  • Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

    After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
    Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
    Problem:
    - New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions. 
    - When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi. 
    - The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install). 
    Solution:
    1) Install Canon Printer Drivers and Software (from official Canon site)
    Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
    Canon 860 Series Drivers & Software  for OSX 10.8 Mountain Lion:
    The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
    1 Printer Driver
    (Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
    2 Scanner Driver
    (Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
    3 Network Tool
    (Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
    Canon Software for using advanced printing and scanning functions (while connected to network)
    4 Solution Menu
    (Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
    5 MP Navigator EX
    (Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
    6 Easy-PhotoPrint EX
    (Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
    Canon Support (HK) – check your local site
    http://www.canon.com.hk/en/download/main/index.do
    Select Product and drivers from support site eg http://support-hk.canon-asia.com/
    1. Choose a product category
    Multifunctional Printers
    2. Choose a product series
      Pixma
    3. Choose a product model
      Pixma MX868
    4. Choose type of document
    Downloads or FAQ
    If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
    2) Check Canon Printer and Software Working while connected via USB
    Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB.  Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’).  This is normally done as part of the automatic install but worth double checking
    3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
    After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
    Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
    DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list).  The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
    You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
    If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List.  It should say WLAN Active, identify the SSID and have an IP address
    If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

  • My "fix" to print problems in LR (using MS XP)

    Having had the same problems printing from LR as many others are complaining about, I thought that I might give my 2 cents to what I did to solve (?) the problem. I have to run with current setting in a while to be convinced that it is not just an intermittent fix though ;-)
    My problem when printing from LR was that the print came out much too Cyan-Green and somewhat dark when color management where handled by LR. When the same photo was exported to PS Elements (PSE) in Tiff with the Pro-photo color profile embedded, adjustments from LR, and printed using the same driver setting and color management, the print came out fine.
    I must mention that I have had fine printout in previous LR versions but I'm not sure when the problem started. But at least from LR version 1.3, 1.3.1 I have had problems printing a proper print.
    As I'm not 100% sure what caused the fix, I don't want to leave much info un-documented, so I start by describing my system etc.:
    - Athlon 64 3500+ with 2 GB RAM
    - Lacie 119 LCD monitor (calibrated with a ColorVision Spyder 2)
    - Epson Stylus Photo 890 printer; an old (6-7 years) 6 color dye-sub printer, but it can still produce very good prints. (It is BTW, the A4 printer version of Epson 1290).
    - Microsoft XP service pack 2
    - Adobe Photoshop Lightroom 1.3.1.
    - Adobe Photoshop Elements 5
    - Latest Epson 890 printer drivers ver. 5.21/P (from 2004)
    - ICC profiles for various Epson printer paper
    - Paper used: Ilford Printasia Photo Glossy Paper (but I have tried Epson Premium Glossy Photo Paper as well with same results)
    I used following setting:
    - In printer driver: "No color management" was selected
    - LR and PSE color management; printer profile: Epson Stylus Photo 890 Premium Glossy Photo Paper, Rendering Intent: Perceptual
    . LR Print sharpening: High
    - LR Print resolution: 360ppi
    When the photo was opened in PSE and I had printed a small print with above mentioned printer driver/color management settings. The print looked good, but with a little magenta color cast, so I thought that if I used a different printer profile this might help (I have no ICC profile for the Ilford paper). So I chose the "Epson Stylus Photo 890 Photo Paper" instead and printed again, and this time the photo looked as it did on my calibrated monitor. I have to admit I was a bit delighted even though it was from printed from PSE and not from LR, but seeing that color management worked in other applications was a relief.
    In PSE, I also I tried changing to a different Rendering Intent before changing printer profile, but with no success.
    Another thing that helped further was to change Media Type in printer driver from "Premium Glossy Photo Paper" to "Photo Paper".
    After the print success in PSE I went back to LR and changed the Printer Profile to "Epson Stylus Photo 890 Photo Paper" (still with "No color management" and "Photo Paper" selected in printer driver) and printed the photo again. Now the photo looked as good as it did in PSE (!!!???).
    Now I have made a few printer preset in LR for various print sizes, and the prints look fantastic. Every time! Do I have to mention that I am a happy guy ? :-)
    BTW, remember that a printer preset also saves the printer driver settings. Forgetting this can easily cause some unexpected results.
    The only thing is that, I still do not know what fixed the problem, and I am a bit worried that the problem might come back again. Maybe the print related changes made in PSE and the following selection of the same settings in LR did - somehow - "synchronize" LR to a proper color management. Sounds weird, but if it works...
    I hope this long explanation was useful to - at least - some of you, who experience printer problems in LR. LR is a fantastic application, and I enjoy using it, but the printer problems has really been frustrating.
    Good luck!
    /Per

    Little unclear about the border thing- you say it prints with a too wide border, but also say:
    When I print the image with this set up, it still is printed without a border.
    It's a factor of your printer, though; some can never print without a margin around all sides; this can be a border, or cut off. Good news, though; you can have a 5 x 7 borderless, or with any size border you wish if you print on larger paper, and trim to taste.

  • Printing problems with HP Laserjet P1005

    everything seems to be ok with my printer HP Lasejet P1005, but it just  doesn't print. The works are in the gueue and error messages continually is "set the new toner cartridge"  althrough I've changed the cartridge already.  Also there is a message "HP:s part number"
    What can or should I do??? Help!!!

    Hi @rlp48,
    I see by your post that you are getting the error message "set the new toner cartridge" and you have already changed it with a HP toner. I would like to help.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
    Open and close the lid 5 times quickly. It should print out a page with lines on it.
    Did it print the self test?
    If the self test page printed, clear the Spool folder and restart the Print Spooler and try printing again.
    How to Clear Current Print Queue In Windows Vista & Windows 7.
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    Are you using Genuine HP Toner?
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Printing problems with hp laserjet 1018

    - printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
    - hp photosmart premium c309 works with all file types
    Windows 7 64 bit
    Adobe Acrobat Pro 10.1.7
    Acrobat Reader 11.0.3

    Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

  • Printing Problem HP PhotoSmart 7960

    Love my printer but recently it is not printing everything.   I have missing text.  Example:  First line of a paragraph prints, skips next 4 or 5 lines, then prints a line, skips a line, prints a line, etc., and missing some letters throughout (mostly the letter 'l' (L)).   Problem seems to be with text; graphics are ok.   What prints looks excellent.  Any ideas what could cause this?  I've tried everything, including updating drivers, etc.  Help is appreciated!

    I finally got it working (by accident)!!!
    What I've done:
    * Reinstalled HPIJS
    * Installed ESP Ghostscript
    First directly connected to the printer, as soon as I got this working, I disconnected it and connected to the WinXP machine again.
    I added a printer on the following way:
    * Printer Utility -> Add printer
    * OPTION + More printers
    * Select Advanced -> Windows-printer through SAMBA
    * Device URL as: smb://username:password@WORKGROUP/XPMACHINE/PRINTER
    * Select the Foomatic driver of the HP PhotoSmart 7345
    Extra information:
    Device URL:
    - username & password: your account on the XP machine
    - workgroup: workgroup where the XP machine is findable
    - xpmachine: networkname of the XP machine
    - printer: networkname of the printer
    NOTE: username & password are case-sensitive and the rest should be capitals

  • HP Officejet Pro 8610 bought 2 weeks ago. giving vertical lines while printing.

    Dear Sir,
    I bought new officejet pro8610 . 2 weeks ago. its giving vertical lines on printing any document from printer. scanner is absolutely fine just problem while printing and copying. i clear printhead few times. 
    i just check that when i am printing any paper from windows photo viewer,there are lines like this.
    but when i copy the same image in Ms Word 2007 and print it from there. the paper is clean without lines. its strange. while i have anyother printer HP Laserjet Color CP1025 attached with same computer . i print the same image from CP1025 from Windows Photo viewer, its clean from there without lines. can any one help me out from this issue

    Dear Sir,
    I bought new officejet pro8610 . 2 weeks ago. its giving vertical lines on printing any document from printer. scanner is absolutely fine just problem while printing and copying. i clear printhead few times. 
    i just check that when i am printing any paper from windows photo viewer,there are lines like this.
    but when i copy the same image in Ms Word 2007 and print it from there. the paper is clean without lines. its strange. while i have anyother printer HP Laserjet Color CP1025 attached with same computer . i print the same image from CP1025 from Windows Photo viewer, its clean from there without lines. can any one help me out from this issue

  • Printing problem on HP Photosmart C5280 All-in-One

    Hi,
    I'm trying to print a single page calendar but it's coming out with streaks in 3 places.  I tried 3x and the streaks are always in the same place.  I'm using Konica Inkjet Paper QP Premium Photo Glossy, which is supposed to be suitable for all modern inkjet printers.  Is this an ink problem, a printer problem or a paper problem?

    My guess would be a print settings issue.  I would suggest setting the media type to Photo paper rather than automatic and set the quality to "Best".
    If that does not help please provide more details - are the streaks at a consistent spacing?  Where are they on the page?  What color are the streaks?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Reader 10.0 Printing Problem - Font changing while printing

    Dear all,
    can anybody help me on my printing problem with Adobe Reader 10.0 ?
    While printing a pdf I cannot do anything else, it is not possible to touch the mouse
    because when I do this, the font is changing while printing to something like grecian.
    Can somebody help me on this ?
    Reader 9 did not cause this problem.
    Thanx and best Regards, Travelplan24

    I have the same problem, but I didn't realize it could be set off by my working on another task. It is also triggered when the pdf has scientific notation, or a very extreme change in font and font size. E.g., text in boxes, algorithms, etc. seem to trigger the problem.
    I have reinstalled my print driver (several times, latest on Sunday), and reinstalled Adobe Reader (now 10.0.1) but the problem remains.
    Printer:
    HP Officejet 6500 (E709n Series) wireless, now on USB.
    Document properties: Most recent font conversion - yesterday:
    Producer: Distiller 4.0.2 for Mac
    PDF version: 1.3 (Acrobat 4.x)
    Fonts: Helvetica-Neue, Type 1, Encoding: ANSI and Roman
    The font is not converting into Greek. E.g. "Problem-Solving Process" became "Qspcrfm . Tpnwjoh!Qspdftt"' with the kerning overlapping characters.
    The font 'conversion' has happened many, many times on a wide variety of pdf files in the past 6 months. Never had the problem before. I had downloaded new Reader, and purchased the new printer -- I do not know which change created the problem.
    I will cease doing anything when I print as a temporary workaround, but that is not a good solution.
    I sure hope you can figure out what the bug is. Thanks in advance.

  • How do you get a list of your contacts nick names and their phone numbers on line and print them out?

    How do you get a list of your contacts nick names and their phone numbers on line and print them out?  I've been trying to figure out how to get the list to print out but I can't even find a complete list to view on Verizon's web site.  Does anyone know how to do this?

    Log into your online account. In the, 'I want to', box type, Manage Contacts.
    Place your cursor over any contact, a pop screen will appear with the option to print your contacts

  • Smartform : line type not working fine when used on Next page

    Hi ,
    Please help on below :
    I have a smartform and have line type which is used in printing the items.
    When I use this line type on very first page , it works fine.
    But for the next page which is the exact copy of first page ,
    the line type does not work fine with printing first line item on next page,
    it refreshed the work area which i am printing. so on the next page very first element gets all the values 000
    But on the next iteration it works fine and does not refresh work area.
    Please see why is such abnormal behavior happening.
    Regards,
    Uma Dave

    Hi Ameya
    there might be syntax error. Try to get what exaclty is an error using following code.
    CALL FUNCTION <smartform>
        EXCEPTIONS
        IF SY-SUBRC  0.
           CALL FUNCTION 'SSF_READ_ERRORS'
                IMPORTING
                     ERRORTAB = IT_ERRORLIST.
         ENDIF.
    In IT_ERRORLIST you will get error message.
    Regards
    Sachin G Patil

Maybe you are looking for