Line2/mic2 soundblaster live platinium

Hi i have problem whit line2 and mic 2
i dont know what i was doing but it doesn'T work ......
i cant unmute lin2/mic2
and no sound
sorry my english

Similar Messages

SB Audigy Platinum Microphone Line2/Mic2 settings h

I have the original SB Audigy Platinum that includes the external bay device. When plugging a headset into the headphone and line2/mic2 connectors, the headphones work and the microphone on the headset does not. I have done some investigation and it appears that the default audio in device is the microphone. I believe that the microphone points to the mic in connector on the PCI soundcard. If I use the Sound Mixer I can manually change the audio in from microphone to line/mic2 and the headset microphone works. However if I stop the using the microphone and then try and use it again I discover that the setting has been changed back to microphone. So everytime we want to use the microphone we must go to the sound mixer and manually make the change. Is there anyway to save the setting line2/mic2 to make it permanent? One of the reasons for having the external bay device to allow the headet to be connected and disconnected without reaching around the back. I am tryng to make this easy for my wife to use (with Skype) without the hassle of the extras ste
ps.
Thanks.

Jeremey, thanks for your reply. This is one of those classic issues where the application folk (like IM clients and Skype) say to ask the SB folk what can be done and you (the SB folk) ask if the application owners can change their applications. So I am exploring options. Gi'ven that we don't use the 'mic in' (mic - microphone) connector on the PCI card, is there any way to reset the Audigy so that the external bay line/mic2 can be recognized as mic or the microphone? Perhaps there's a jumper or soft switch setting? Otherwise, is there anyway at all from the SB side (card, jumpers, drivers, Creative apps) to set the microphone to line2/mic2? Like I say I am looking for ideas from the SB side.
Thanks again for your reponse.

Problem with DTT3500 soundset and onboard Soundblaster live! 24-bit

Hi,
I have bought a new PC with an MSI k8n sli platinum MB. this mainboard has a built in soundblaster live!24-bit chip onboard. it works great on headphones and normal 2 set speakers (analog connection).
however, when I try to set them up at the DTT3500 speaker set, trouble begins.
before continuing, just want to say First that my older PC is standing next to it, with a Soundblaster live! 5.1. If I connect with this PC to my speaker set, via the digital uitput, everythin works great. (5.1 surround).
In the DTT3500 manual, when Digital DIN is blinking, it says it isn't recieving any signal, or not the right one (like AC-3). (I know this when on my old PC when I switch to headphones, the digital din is then blinking, which is normal as I disabled Digital output in Windows)
now my questions:
Is this digital port is ac-3 signal or somthing else on the Soundblaster live! 24-bit?
Do I need to use another type of cable, like SPDIF Din Cable? (I now have a minijack to Din cable)
I tried with optical, it works, but only with 2 speakers (left and right / digital output is on). is this normal? If i look at the manual, it's typical used for gameconsoles with stereo left and right. I guess this is so with the DDT3500 decoder...?
if I try Digital Din on the Decoder, it doesn't work. the Decoder Led keeps blinking. Yet in Windows, digital output is on and 5.1 speakers is selected.
In short, exact the same setup on the Decoder and PC as my older PC.
My guess is the the soundblaster live! 24-bit is an enhanced version of the soundblaster live! 5.1? Am I wrong, I don't know....
I do know that the reviews said you could use the digital port (orange one)
here is a picture:
http://www.overclockers.co.nz/ocnz/reviewimage.php?id=05boardnf4sli00microstak8nslipt0104&file=panel.jpg
and here more info on it: http://www.overclockers.co.nz/ocnz/review.php?id=05boardnf4sli00microstak8nslipt0204
I would apreciate any help, as i'm really stuck at the moment.

does anybody use the soundblaster live! 24-bit to power a surround speaker set? or is it just impossible? (for gaming)

ALsa + Soundblaster Live 5.1 + 5.1 Sound

HI there!
I finally bought a 5.1 Surround System today, but I have a major problem. Only the Subwoofer, Fron-Left- and Front-Right-Speakers are working, no Sound from Center, Surround-Left- and Surround-Right-Speakers
Here is my modules.conf, Alsa-Page says it should work:
# module : ALSA
alias char-major-116 snd
alias snd-card-0 snd-emu10k1 snd_cards_limit=1
options snd-emu10k1 snd_index=0 snd_id="EMU10K1" snd_extout=0x1f0f
# OSS/Free portion
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
options snd-pcm-oss snd_dsp_map=0 snd_adsp_map=3
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
And now my .asounrc
pcm.emu10k1 {
type hw
card 0
ctl.emu10k1 {
type hw
card 0
I tried so much already and nothing works
I played around with alsamixer and I finally got the Center-Speaker to work, but it just works instead of the Front-Left-Speaker. It really sucks.
Maybe you can help me, it would be nice.

i had some same issues , but i have soundblaster live 24-bit , but disabling the onboard bios didnt do anything for me , so i had to look for some ways to figure out how to fix this , * love thy google.com/linux *
bash# speaker-test -c6 -t2 ( this is to test your surround speakers , providing your using ca0106 driver such as myself )
if you only get a few channels you could also make your ~/.asoundrc file with some goodies in it ill post a few examples i have found
pcm.ca0106 {
type hw
card 0
ctl.ca0106 {
type hw
card 0
ctl.!default {
type hw
card 0
pcm.!default {
type hw
card 0
pcm.!default {
type plug
slave.pcm "dout"
pcm.dout {
type dmix
ipc_key 1025
slave {
pcm "hw:0"
period_time 0
period_size 1024
buffer_size 4096
rate 44100
ctl.dout {
type hw
card 0
pcm.duplicate {
type plug
slave.pcm "surround51"
slave.channels 6
route_policy duplicate
pcm.dmixs51 {
type dmix
ipc_key 1024
slave {
pcm "hw:0,1"
rate 48000
channels 6
period_time 0
period_size 1024
buffer_time 0
buffer_size 4096
pcm.!default {
type plug
slave.pcm "dmixs51"
pcm.duplicate {
type plug
slave.pcm "dmixs51"
slave.channels 6
route_policy duplicate
Now dont forget to run alsaconf before you do this and make sure you have 5.1 surround speakers for this as well
any other questions about the soundblaster live 24-bit , contact me and ill try to help if i can , ( i have been reading about this for days )

Soundblaster live gameport not working on k7n2 delta-L

i have a k7n2 delta-L motherboard and i installed a soundblaster live sound card and can not get the game port to work at all. first i thought it was a bad card so i installed a different card and the same thing so ithen thought it was the game controller and tried a different one and it didnt work either . and yes i disabled the on board sound in the bios before installing the card. i have it in ide slot #3. seems to be the best to go with .i am running win 98 se. and all my drivers are up to date. any help would be greatly appreciated. thanks

fourhooffarms,
In the BIOS Disable the onboard Realtek Sound and then put the Live! in PCI Slot 3 or 4, then set the IRQ of that Slot to IRQ5.
Also list all your IRQs and every Device on each IRQ.
Take Care,
Richard
P.S. Do list the specs on your Power Supply too.

SoundBlaster Live! 24 and Vista - Deteriorating Sound Qual

I've recently upgraded to Vista Business, and my system informs me that except for the drivers for an ancient scanner all is working properly.
When playing music (using a Creative SB Li've 24bit card with the most recent driver installed), all starts off well (in fact playback is better than under XP Pro) but the sound quality starts to deteriorate badly, especially when I open a browser. Quite often the browser itself seems to freeze.
I have 3Gb RAM, with a 3.60Ghz P4 processor.
Task Manager tells me that often I am running at 00% of CPU capacity, though the problem seems to occur at lower usage too.
I've checked everything I know to check but just can't seem to get to the root of the problem. Can anyone suggest anything I should be looking at?

Sadly no real progress.
I simply pulled the Soundblaster Live 24 out of the computer and am using the onboard sound instead which at least for me Arch recognized just fine.
I haven't been able to get any suggestions for why the Soundblaster was not working, but I am going to try another sound card a friend lent me and see what happens.

Line2/Mic2 setting not holding with Skype and MS

I am currently running SB Audigy 2 ZS Platinum with Creative front panel on a XP SP2 machine. I am extremely happy with this sound card. I have the latest drivers and updates for both OS and sound card installed?Recently i ran into something that has boggled me. I can set the mic settings in the sound settings to default to the Line2/Mic2 port on the front panel?and it works fine. However when i try to use skype or MS IM with my headset plugged into the front panel, the setting changes to the rear panel mic setting as soon as i try to make a call. I set both skype and MS IM to use "windows default" for the mic input, but it changes (the same thing happens when i set them to use the SB Audigy selection), almost like those programs are forcing their own settings. No other program i am running does this and i can do video edits with voice overlays using the front panel without any problem.
My headset is not USB, it is analog with seperate plugs for both earphones and mic and otherwise works perfectly. Frankly i am stumped, i would rather not have to use the rear panel Mic port if i can avoid it?Thanks in advance for any and all assistance. Jean Luc?

Some programs do force their own default settings for the recording device, Messenger is one of those programs, it alters the mixer settings. You can try muvixer, it resets your recording settings when a program changes them. http://www.muvaudio.com/muvixer/

Problems installing soundblaster live

I just bought a kt4 ultra I am trying to install a soundblaster live sound card, I go to the bios and disable the audio on board option, but when windows xp starts it recognizes the sound card but then it hangs, any help to fix this is much appretiated. thanks

try pci 4

MSI K9N DIAMOND CA0106 chipset AUDIGY or SOUNDBLASTER LIVE 24

I have 2 PC's one with an MSI K8N SLI PLATINUM mobo with onboard SOUNDBLASTER 24bit li've (CA006)
http://global.msi.com.tw/index.php?func=proddesc&prod_no=69&maincat_no=&cat 2_no=&cat3_no=
This system has run fine for over 2-/2 years now with no troubles it was connected to my PIONEER VSX 86 via SPDIF/toslink? and has excellent sound and performed all that I wanted including DTS DVD's and all my music video clips, DIVX movies etc etc
The trouble is, I have just setup my new system
MSI K9N DIAMOND also with the onboard Creative sound (CA006) and comes supplied with the Creative Audigy disc
http://global.msi.com.tw/index.php?func=proddesc&prod_no=028&maincat_no=&ca t2_no=7
When I try to install the drivers/setup disc it tells me that there is no Audigy onboard/installed? I have managed to install the drivers/disc from the previous soundblaster li've 24bit, It does work with the Audigy goldmine demo and has all channels of sound as it should but in the Surround mixer speaker settings it will only sound out 2 speakers even when it shows all 5. as it is currently configured
I have tried to download many other drivers with no luck
My main concern is the creative programs from my old system are not what I want, I paid for an AUDIGY setup not LIVE
Is it possible to get the AUDIGY onboard running as it should (showing AUDIGY in hardware manager, not LIVE 24bit)
I would like to be able to run the newer software from the AUDIGY disc but it is not compatible when the LIVE drivers are installed
I have had one set of drivers display AUDIGY in the hardware manager but when I tried to use the speaker settings etc it fails and says soundcard not found even though it clearly shows AUDIGY drivers are installed
I have been very happy with the creative sound so far on my first MSI system but I'm not very impressed with this setup and I'm still not sure who's fault it is MSI or CREATIVE?
Can someone give me some details as to what is going on here, I would like to know if it is also possible to use some kind of new software/programs for the soundblaster LIVE that has maybe more settings/functions or just a later better style as I may have to use the same on my new system
The menu's etc in my new manual (K9N DIAMOND) look almost identical to those included with the K8N SLI, The disc included with the K9N DIAMOND has an AUDIGY quick start program/demo which gives you a preview/guide on how to use the supposed AUDIGY which has all new menu's, layout and features which im unable to use?
As mentioned I have used the soundblaster 24bit LIVE for well over 2 years now connected to my PIONEER VSX86 via a digital cable so all the previous settings etc have been compared and doublechecked but im unable to find answers, If I am unable to find help or any way to install the AUDIGY as im meant to have I may resort to fitting another soundcard and I may got to another brand unfortunately
Any help appreciated

If I am right the onboard Audigy on the MSI K9N Diamond utilizes the CA006 chip instead of the EMU0k2, therefore it is not a real/genuine Audigy soundcard. In fact it's the same as your former soundblaster li've 24bit which also utilizes the same CA006 chipset. That's why you can use the driver from the SB li've 24bit for your new "Audigy" onboard sound. Also there are other soundcards that are not genuine Audigy soundcards: Audigy Se, Audigy LS and, yes, also the X-fi Xtreme Audio, all utilizing the same chip, CA006. Creative Labs use some marketing techniques, add some different (newer) software/apps for the soundcard and give the soundcard (with the same chipset) a different name. In my opinion, if you for example buy a X-fi Xtreme Audio you in fact for the most part paid for the included newer softwares (which for example add "X-fi features like Crystalizer etc.).
If you really want a better soundcard, maybe go for the X-fi XtremeMusic or XtremeGamer which utilizes the genuine EMU20K chip (with hardware acceleration). The soundquality is significantly higher than the soundcards with the CA006 chip.
As for the drivers for the soundcard:
Official Creative Labs driver for Sound Blaster? Audigy? Value/SE/LS, or Sound Blaster Li've!? 24-bit audio devices
Good luck!
Message Edited by CTman on 05-07-2008 0:28 AM

Soundblaster LIVE! Macint

Ok, Creative shows a MAC version of the LIVE! card but no one and I mean NO ONE has ever seen one. Is there a SB PCI card w/ drivers for OS X?
M-Audio products are over the top as far as price and SB does it better anyway...anyone shed some light on this one for me?
Thanks!

I have a Soundblaster card in my G3 Mac Blue+White. But I have yet to find a firmware patch, so it works with OSX.. That's why I'm at this site today! :->
I was hoping some smart dude out there wrote a little "patch-burn" update... I've seen them for some older/off-brand cd burners etc. Just a little firmware update to make it play well with OSX. I love my old B+W and It's a great card for the money... I got mine at Fry's for $90 bucks. But I have to boot 9.2 to use it... That's no fun.
Gonna keep looking
Mike

Soundblaster Live! on KT4A-V freezes system

I have the on board sound disabled in the bios. I installed the soundblaster card and installed the drivers. There were no hardware conflicts in device manager, and I had sound coming out of the card. But when I reboot the system it freezes . I tried a different pci slot, same thing. I thought maybe it's because the card is sharing IRQ3 with the usb ports, although, as I said, there are no conflicts. It wouldn't let me change it, but I read anther post that suggested changing the plug and play os setting in bios to now. I also read other posts that talk about using newer drivers for the mb or sound card. I'd use the on board sound instead, but the Live card lets me use my 4.1 Cambridge Soundworks speakers, Any ideas?

"Do I ned to install the original drivers first (the ones that the pc is freezing with)?"
Yes, otherwise the creative AutoUpdate will not recognise your creative soundcard. That is why I said to use the AutoUpdate for driver 'updates'. But most important, is that you install the chipset (VIA 4in1) driver FIRST, before any other device drivers (including your sound card and video card).
Good luck! Let us know what happens...

Soundblaster Live! 24-bit No Sound Prob

I installed this sound card on my windows xp sp2 comp and it worked fine, I went to install the same soundblaster li've! 24-bit card on my windows 2000 sp4 comp and installation went fine. My problem is I get no sound what so ever on my windows 2000 comp and my windows xp comp did, I tried plugging in different speakers, headphones, and any other audio devices I could find that I know worked(tested on numerous things besides my windows 2000 comp) and nothing works. Driver version is 5.2..34, which came directly off the CD from the retail box that I purchase. I could not find any new drivers for this sound card off Creative's website, so I figure there wasn't any new releases. My sound panel has all my volume controls at 00%, the Creative Surround Mixer has all my volume controls set at 00%, and I know for a fact I have everything plugged in correct(Audio output device plugged into green, mic plugged into blue, nothing in orange or black). Any help would be much appreciated,
Thanks.
EDIT: System specs are;
AMD Athlon XP 2200+, 768mb RAM, Radeon 9600xt, FIC motherboard.
Message Edited by Seventhwind on 2-3-2004 0:02 AM

Seventhwind,
Did you check Speaker Settings application and ensure that the Digital Output Only option has not been enabled.
Also disable any onboard audio from the BIOS if any.
Jason

USB SoundBlaster Live not turning on when I log on.

Hi,

Having a small problem with my 24-Bit External (USB) Sound Blaster Li've:

All of the Audio Device Settings have this as my default sound card for all audio.
However, recently when I turn on my laptop, the SoundBlaster isn't turning on automatically, and my laptop's internal soundcard is used instead
. In order to rectify the problem, I have to unplug the USB and then put it back in again, and the USB device "bing" sound happens, and the Soundblaster works again.
Why is this happening?
How can I solve the problem?
Any help would be gratefully received!
Many thanks

Dave

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My speakers won't work on my new computer with a Soundblaster live! 24

When I was in college, I bought a Gateway computer that came with with Boston Acoustics speaker model BA735.
Recently, I bought a new Dell computer with the Soundblaster Li've! 24 bit and my speakers won't work. I have an old set at my house that works fine, so I know the card isn't broken, but I'd prefer to use my own speakers.
I don't know if I have to download drivers or change settings or what, but this is a pain. I have found some of the same problems posted, but they are usually involving a gateway computer, so I don't know if I can download gateway drivers for my Dell computer, I'm not very good when it comes to these things. Any help you can give me I'd appreciate.

HI,
In most cases this is about the Internet Speed or the portion of it your computer gets that iChat can see at the moment it tests the speed during it's launch process.
That is to say that as you start up ichat it tests the speed it can see.
this can be effected by other computer doing a download and "taking" more of the Bandwidth or rather leaving a smaller amount for your Mac.
The same is true if your computer is already doing a download or using the Internet heavily.
Of course at that moment your ISP could also have cut the speed you get.
If you launch iChat and go to the Video Menu > Connection Doctor what does the Capabilities tab say ?
This may have red crosses against some items.
Also check iChat Menu > Preferences > Video Section > Bandwidth Limit
This should not be set at 100kbps fro Video chats.
Have you tried restarting the computer ?
6:54 PM Friday; March 30, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Windows Media Player 11 problems with SoundBlaster Live! Driv

My sound card stops working as soon as I try to watch a video with WMP. I have a Creative Labs SoundBlaster Li've! with a driver date of 8/29/2002. When I go to adjust audio properties, the system doesn?t recognize the card even though it is still listed in the hardware and says ?Device is working properly. I have reloaded the driver, and the card begins to work again, but as soon as I attempt to view a video, I?m back to the same place.
When I run the diagnostics included with the SoundBlaster card prior to running WMP, it passes on Hardware Detection, Wave Driver, MIDI Driver, DirectSound Driver, DirectSound3D Driver, but not on Mixer Driver, SoundFont Setting and Mixer Settings Check. After I run WMP, the only test that will pass is the Hardware Detection.
I have also tried this with the October 2002 driver set for SoundBlaster. In addition, I have downloaded the most recent driver set from Creative Labs.
I'm running Windows XP SP2.
Other programs like iTunes and various games work after I reinstall the drivers, but will not work after WMP starts. It appears that WMP is the source of the problem. Any suggestions?

Make sure you have the DRM update for the Li've drivers. I suspect WMP is cutting out the sound. Just to make sure that this is in fact the case, you could try playing back your clip with some other media player.

Line2/mic2 soundblaster live platinium

Similar Messages

Maybe you are looking for