Lines on images upon printing

When I print images with my pixma 7120, there are lines of missing color on the image. Mostly on the blue and green colors. I have already done a nozzel head cleaning AND deep cleaning. Now what?

Hello, and Welcome to the HP Support Community!
Are you using a sheet-feeder, or placing the document to be scanned onto the flat glass area?
If using the feeder, a simple fix is to look for a piece of dirt or paper in the tiny slot of a window at the end of the large flat glass area.  Blow it clean, or gently remove it with a soft rag.
This slotted window is where the document is viewed when the feeder is used.  Any piece of paper caught there will produce a black line right where it is located!
HTH,
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • Lines on image when printing Raw files

    Dear All
    I am trying to print Raw images.
    After converting and making my adjustments, I click on File > print (in the PSE editor) and then use the cursor to drag out the image to the size I want (roughly a 10 inch by 8 inch image to be printed on A4 paper). I then print it and it comes out with loads of parallel lines on the image.
    Any advice to correct this?
    Regards
    Jon CAmilleri

    Hello All
    I am managing to print out raw files fine after manipulating them in canons own software (Digital photo professional) but still getting bands when using PSE 7 raw converter? Any more advice?
    When sending to print in PSE a box comes up saying 'Some post-script specific settings (interpolation, calibration, encoding) will be ignored as you are printing to a non-postscript printer'  This box does not come up when printing from digital photo professional. Could this be the problem resulting in bands on the image and, if so, can it be corrected?
    Someone mentioned about Gamut problems - how do I alter/correct these?
    Also, with Raw files, after I have manipulated them (e.g to black and white) how can I perform other tasks (eg dodge and burn areas)  as it seems that PSE wont let me do this on a RAW image.
    Do I have to save it as a JPEG first ?   If so, what is the point in taking a RAW image in the first place if I am going to lose detail by converting it to a JPEG?
    Sorry for all the questions
    Regards
    Jon

  • Lines in images when printing from anything but iphoto

    When I print on my computer from anything but iphoto the quality is horrible and the print has very noticeable lines in it across everything. I recently did a layout in Adobe Illustrator and when I went to print it on regular 4x6 satin photo paper there are lines everywhere. This also happens when printing from powerpoint, photoshop, word, and whatever else that is not iphoto. I cant send out things that are printed at such horrible quality. Everything comes out fine when i print text in black but photos look pixelated and have lines in them no matter what paper I use if printed from anything but iphoto.
    HELP DR.

    Check the printer manual about calibrating. There is a solution in most drivers for inkjet printers which may call like paper forwarding or so. It seems, that your printer forwords the paper a bit to much before the line is printed.

  • White lines appear around placed images in printing.

    A native Illustrator document with placed Photoshop (both CS6) images produces whites lines around the placed images when printed.  The Illustrator document does not show white lines on screen.  Nor does the PDF (Acrobat X Pro) generated from the IA doc show white lines when viewed on screen.  When the document goes to press, the printed product show the white lines:
    See upper left image and lower right image-note: other images are not affected.  Both both are native Photoshop images, placed on a gradient in IA.  Perhaps the PDF settings: "Adobe PDF Preset" or "Standard" are not chosen correctly?  Why the white lines?

    You screenshot shows a modified Illustrator Default preset with Compatability to Acrobat 4. That setting always flattens transparency which is what I would suggest avoiding first.
    Note the Warnings summary alerts that transparency will be flattened.
    garlic541 wrote:
    2.That same initial 'Save Adobe PDF' widow allows for three settings: Adobe PDF Preset (12 choices); Standard (6 choices), and Compatibility (5 choices).  Note how the window signals a Warning (Warnings: Saving this file with Compatibilty set to Acrobat 4 (PDF 1.3) requires items with transparency to be flattened.)  Could this be a warning that produces the stitch lines in the actual printing? 
    Yes
    garlic541 wrote:
    After researching....
    Discussion seems to indicate seeing 'stiching lines' on screen; sometimes in the designing application; or in the generated PDF.  My instances are visible only in printing-in two of the four images.
    1. Transparency.  Is this an automatic occurence in generating the PDF?  Can I turn it on/off? (The 'Save Adobe PDF' window that allows changes to: General, Compression, Marks & Bleeds,Output,, Advanced.....)
    Transparency is part of some design and all Effects. Note that you can change a color by using a tint or by setting it's transparency. Many times a tint will suffice. It looks the same and has the same values.
    Your original screenshot apears to use images with clipping paths. (Full disclosure - I should know this, but don't...I expect) clipping paths require/invoke the transparent background to place the images within the colored area.
    You cannot get around transparency but flattening converts vector objects to raster objects (when transparency touches/abuts/interacts with raster images).
    You should be able to use the Illustrator Default, High Quality Print or PDFX-4 to maintain live transparency
    2 very old (2004) Adobe white papers, not too legnthy which I can shed some light. Note - PDFX-4 superceeds all of these.
    Transparency in Adobe Applications: A Print Production Guide
    A Designer's Guide to Transparency for Print Output

  • I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out.  I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them.

    I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out.  I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them. I opened & printed the image on my PC using PAINT.NET.  No lines appeared. I sent the image to my daughter. She printed it and found no lines. I printed the image using Seahorse on my Mac and the lines still appeared. I used basically the same print settings on Mac and PC.

    maahes wrote:
    did so now, only now I'm getting a slightly different error: could not find udevd no such file or directory. I checked both grub.cfg's and my mkinitcpio.conf and there's no listing for udevd ....which I've never heard of, so I assumed it was a typo?
    For clarification: udev is in the mkinitcpio.
    I'm not sure whether I yet have a good intuition for how you have your machine set up, but I suspect you need to include a cryptdevice flag to the kernel in your grub config. The file isn't found because the kernel doesn't know your root directory needs decrypting first.
    My setup is an LVM over LUKS over LVM sandwich. To boot into my system, the grub.cfg contains the line:
    linux /vmlinuz-linux root=/dev/mapper/cryptvg-root cryptdevice=/dev/mapper/vg-crypt:root rootfstype=ext4 pcie_aspm=force acpi_osi=Linux acpi_backlight=vendor i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 ro
    Now, most of those flags don't have anything to do with your problem, but note the cryptdevice. It tells the kernel it's dealing with an encrypted filesystem sitting in a logical volume called crypt on a volume group called vg. The bit after the colon tells the kernel to associate this encrypted filesystem with /dev/mapper/root.
    As for how to fix your system, I'm afraid I still feel a bit fuzzy about how your LVM and encrypted layers relate to each other, whether you have LVM over LUKS, or LUKS over LVM, or something else. Was there a particular how-to that you followed?

  • Image not printed in SapScript, only after page break

    Hi,
    I have a problem in printing an image (stored as text) in a sapscript. The image was uploaded correctly from a TIF file in tcode SE78. The image contains a signature and I need to print it at variable positions within the form. That is I need to print it in the MAIN window. The image does not get printed when a page break occurs when outputing the text element containing the picture. If the page break occurs when outputing any (other) text, the image is printed correctly (after that text).
    Has anybody else encountered this problem? Could it be a sapscript bug?
    Thx in advance.
    Claudiu

    >
    > Looks like the last page is not called !!! I can see data only on one page and it shows page 1 of 1.
    >
    > "make sure ST_TEMP is filled with data" how do I do this ?? My program line node has the data filled in the internal table it_temp and the loop node has the data transferred to st_temp for every row. How can I debug the program lines code ??
    > > Have a break <username> in the program lines. and check it_temp has data in it.
    > "use a command and call the last page at end of the loop on internal table"...how to do this ?
    > > like program lines there is a "command line" do a little search on SDN for more info on how to use command lines for next page.
    >

  • Colored lines in images from Photoshop CS2

    One of our users is having a problem with colored, horizontal, 1 pixel lines intermittently appearing in photos worked on in Photoshop CS2 (as far as I know he is in Tiger - unable to check presently as I am at home and he is in his home and everybody is off on holidays...). I will ask him about OS etc, but will probably not get an answer immediately.
    Does somebody maybe remember what causes this (if the description is enough)? Reminds me of the white lines in images sometimes talked about. But these are colored, horizontal. I did a forum search and a kb search but found nothing.

    Also try adding - bad Ram corruption - to your search as these are also symptoms of bad ram
    Typical symptoms of bad Ram in Photoshop include rows lines patches of bad pixels on screen that also print (the actual file is being corrupted). If the bad pixel areas are on the monitor, but do not print (the actual file is not corrupted), video card or video-card drivers are prime suspects.
    A bad cable, bad card, bad switch, bad/misconfigured router, bad repeater, bad termination, bad wiring, bad hard drive, bad controller, bad connections, bad logic board, bad CPU just about anything between your computer and other computers can also cause these symptoms in Photoshop, said Adobe computer engineer Chris Cox.

  • Unhanded Exception upon printing

    Hi Good Day!
    I created a Statement of Account Report and upon printing it always show, Kindly see my attached image. My parameter for this report is Sales Person,Business Partner and Date range the related module is AR,AR Credit Memo,Journal Entry and Incoming Payment.
    Thanks in Advance,
    -Mark

    Hi,
    Try to select minimum data range and then try. If still error occurs, refer SAP note:
    1989457 - Analysing unexpected application shutdowns
    Thanks & Regards,
    Nagarajan

  • In Windows 7, how come my in-line attachment images on email can not be viewed/open in the email?

    I have windows 7. Recently, after Moz upgrade, I noticed that emails with in-line attachments are either completely deleted, or only the name of the file in text is shown - not the image itself.
    How can I re-set or change my settings to enable in-line attached images from the web (example .cid) be viewed? My plug-ins are all up to date (quick time, java, etc).

    Let's try this first. Hold down the Shift key while you try to launch iTunes. You should eventually see the following dialog:
    Click "Choose library". Browse to inside the following location (depending on what operating system you're running):
    Operating System
    Default location of iTunes library
    Microsoft Windows XP
    \Documents and Settings\[your username]\My Documents\My Music\iTunes\
    Microsoft Windows Vista
    \Users\[your username]\Music\iTunes\
    Microsoft Windows 7
    \Users\[your username]\My Music\iTunes\
    ... and open the iTunes library you find in there.

  • How to ristrict 10 line items in Check Printing Form F110_PRENUM_CHCK

    Hi,
    I have requirement in Check Printing form F110_PRENUM_CHCK. I have to print only 10 invoices (line items) for the corresponding Document number. If there are more than 10 invoices (line items), 11th invoice onwards should print in another printer in plain papaer. But upto 10th invoice should print in actual Check form. 
    How can we handle 10 no of invoices restriction in actual Check Form ? If more than 10, 11th invoice should print in plain paper.
    I copied F110_PRENUM_CHCK into Zform.
    Pls suggest me.
    Thanks in advance.
    Regards,

    Hi,
    Thank u for u r reply.
    I assigned in custumization, Still I am not able to display when we have morethan 10 line items. If we have 20 line items, It should display 10 line items in Actual check form and 11th line item onwards should print in another plain paper or 1st line to 20th line in another form.
    Regards,

  • WhenI print from firefox on a Mac everything comes out 50% too light, if I save the image and print from the desktop it looks fine. No problem either printing from FF with Win7. How do I fix FF on the Mac?

    My iMac runs bootcamp, so I have both OSX and win7 available. I run the latest Firefox on both as my primary browser. The printing looks like the ink is running low, but when the same image is printed from other desktop apps the printing looks fine.

    Hi, Jordan -
    Welcome to Apple's Discussions.
    If the original drive in the newer Mac is a Western Digital, its jumpers may be set to Single, which WD drives often use when there is only one device on the bus. When a second drive is added, the jumpers on the original must be reset to Master.
    OS 9's utility is named Drive Setup - you should find it in the Utilities folder on the hard drive. Run that. Select the added hard drive in the list, then select Mount Volume from the Functions menu.
    You can also check with that utility to see if the OS believes the drive has been set to automount at boot. Again, select the drive in the list. Then select Volume Settings from the Functions menu - there's a checkbox in that screen to set automount (for freshly initialized drives, that's turned on by default).
    Also, try running Disk First Aid (should also be in the Utilities folder). Let it have a look at the second drive, and repair anything it can.
    Apple System Profiler should report the format of all drives it sees. Is the format of the drive from the old Mac stated as Mac OS Standard, or as Mac OS Extended?

  • Lines over images and around text in Captivate SWF file

    My project works & views fine in captivate and when published, it views fine on my mac - through flash player and browsers. But when I send a swf file to the client to view they see odd lines above and below images.
    But they dont see the lines when they view the htm file within a browser - then it views fine.
    The lines only appear when there's text over an image.
    Screen shots attached.
    My captivate project was created by importing a Powerpoint document, with images and text on each slide.
    I've changed the optimisation / slide quality through prefrences and on each slide to the highest quality.
    I've also un-selected the advanced slide compression.
    Is there another thing I can try to iron out these lines?
    Some of the images within Powerpoint are stretched, would this cause the lines?
    Is it a flash player issue?
    Or a zooming issue?
    Any help is much appreciated!

    Thanks Lilybiri,
    I am a new user & just finding my way
    I understand how to publish and how Captivate creates a zipped file with a SWF, HTML, JS and CSS files etc. (Im using Captivate 7). 
    How do you send Captivate projects to clients for review / approval before you supply them with the whole project zipped file?
    So far I've been sending them the swf file to check. And have had troubles with them viewing the lines over images and around text. Even though I cant see the lines.
    I need the client to see what I'm seeing - a project without any lines.

  • HT3669 Latest Mac OS Update Driver for Canon 9500 Pro causes text lines all to be printed over the first letter of the line?

    Anyone know how I can 'fix' the Mac OS printer driver for the Canon 9500 Pro - all my text lines end up with the whole line being printed over the first character of the line of text when printing PDFs. It has ruined a lot of work.

    I'd try this:
    Delete the current printer (reset the print system) Mac OS X: How to reset the printing system
    Delete all other Canon software and utilities from your computer.
    Do a factory reset on your printer
    Use Software Update to download the driver from Apple.
    Don't reinstall any other Canon Utilities.
    Make sure you don't have something mechanical stopping the paper from advancing.
    If the problem is really the driver, then you could look in Gutenprint for a different driver. Gutenprint for Mac OS X

  • Missing images when printing (in Word)

    I am wrapping up a very long report for a client, and have inserted a number of color images (JPG). I cannot for the life of me get them to print. They show up just fine in the print preview, but nothing actually shows up on the paper when I actually print the document. I have checked every setting I can think of, but nothing seems to be off. I have tried converting to PDF, but the images are missing in those, too.  I've also tried converting to a DOC file (rather than the current DOCX version)-- also a fail.  Does anyone know what the trick is to getting images to print in Word??? I'm at a total loss and it's driving me batty.
    Copying and reformatting the entire report into Pages will take FOREVER and I'm really hoping to avoid that.  Help!!!!
    Thanks. 
    Kacy

    Support for Microsoft Word - Microsoft Support

  • Drop Shadow is Causing a Colour Box to Appear Upon Print

    I am in the midst of creating a brochure which I am wanting ot use some drop shadows on to create separation between colours.
    I have noticed that in the three locations that i've used drop shadows (one is a white square shape, one is on font, and one is on a graphic with a transparent background) there is a light, almost transparent, box that is appearing upon print.  This box does not show up in any way on the .pdf, but appears when printed.
    Is this an issue with my printer, or am I somehow causing an error with my drop shadow settings?

    Sounds like it might be this: InDesignSecrets » Blog Archive » Eliminating YDB (Yucky Discolored Box) Syndrome
    Are the background colors spot colors?

Maybe you are looking for