Lines showing momentarily on one we site

I regularly access a forum without any problems but on my new i-mac all the posts are momentarily enclosed in black lines for a fraction of a second then the page appears as normal. As I go back and forwards to the many posts this is a strain and an annoyance which I never had on PCs.
I have varied the resolution without effect but is there some other aspect I should be looking At?

Yes, it's not normal for a page to redirect to an image, particularly a nonexistent image.
In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?

Similar Messages

  • How to show data from one web site to other web site having diffrent domain.

    Dear all,
             i want to show the selected data from one web site to other web site.
    the location of the two web site is geographically seprated (and diffrent domain)
    Please tel me in how many ways it can be accomplished.
    If it can be done using jquery then please tel me the function or procedure to do it.
    Note: ( i have seen the above behavior in many web sites .
    like, i was purchasing some thing but finally declined,
    after that i visited some other web sites to gets some other data on other area
    , and i show my selected items of the first web site  on second website as advertisement.)
    i would like to know how these things are accomplished and how it can be done in asp.net.
    yours sincerely

    Hello,
    Thank you for your post.
    I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
    the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    Because your issue is about ASP.NET website programming, I suggest that you can consult your issue on ASP.NET forum:
    http://forums.asp.net/
     for better solution and support.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Using lightbeam i only see the sites i visit as circles no triangles or lines showing the third party conections but the third party sites do show in my list.

    attempted to use the lightbeams toggle controls but no change, no lines, no triangles, just the initial site i visit on the graph. Third party info is shown on the list though.

    Hi the edit-master! I really love Mozilla Firefox and am up to version 26 at the moment but this is weird sir. The Lightbeam was working perfectly and suddenly lost it's ability to Show the Global Location of the Servers tracking us on my windows xp pro at least! First I reset it=that didn't work.Then I totally uninstalled it and reinstalled it and even restarted the browser to no avail. It's like I did absolutely Nothing except loose all my data on all that were showing previously-Duh! Very frustrating and I really loved this extension too! Thanks,Michael
    **All fixed by myself as seen below thanks!

  • Why does one of site pages show up as index in my reports?

    Why does one of site pages show up as index in my reports?

    Hi morganagordon,
    Kindly share the URL of your site.
    Also, check the Page Properties of the pages in your Muse file for the page name, page title and file name of the pages.
    To check the same, you will need to open the file with Muse, go to the Plan view, right on each page thumbnail, select "Page Properties" and select the Options tab.
    Regards
    Sonam

  • When user clicks on "Like Button," the counter increases but nothing shows up showing the user recommends my site to their friends. What did I do wrong?

    When user clicks on "Like Button," the counter increases but nothing shows up showing the user recommends my site to their friends. What did I do wrong?
    I used the iframe code from Facebook's "Like Button" site; and inserted the code in the html widget popup box, then positioned it where I wanted it on my page and published. It looks fine (though I had to add "http" before my url to get it to show up).
    So, when a user clicks on button, a pop-up opens asking for Facebook password. When I (the user) enter a password, nothing happens after that. I thought the idea was that a user would be able to show their friends that they like my website. After I entered my password in pop-up after clicking on "Like" I went to my facebook page (a company page) to see if it showed that I (the user that clicked on "Like" on iweb) recommended the website. But nothing showed up. I thought maybe it was because Facebook associated my password as the admin for the Facebook page so didn't count it. But a friend tried it and same thing happened. I went back and on one page I put in another facebook code for a combo Like/Send button. It shows up but acted the same as the regular Like button.
    Questions:
    1. Is this the way the Like Button is suppose to work? Only benefit of Like button being that it just counts the clicks on the Like button and does NOT let users share their recommendation with their friends?
    2. If it's suppose to let users share their "Likes" with their friends, what did I do wrong? There were three types of code but in reading discussions, they all say to use iframe. (I used the first choice which I think was html for Javascript SDK and put that in my HTML Snippit box and the Like/Share button showed up on my iweb page next to the facebook icon and the words "likes this" but when I click it, I don't see instructions that it's sending my recommendation to my friends.)
    I must have done something wrong, but can't figure out what. Does anyone know? If the only benefit of the Like Button is the counter, it doesn't seem worthwhile.
    Thanks to anyone who can figure this out!  My website is couponsforfun.com

    You want something like this?
    http://home.wyodor.net/demoos/facebook/
    The send button sends the link to their friends in the address field with a message.
    They recieve a message in the inbox.
    There's no post on a page.
    If they want that, then they should share the link themselves.
    Perhaps it's best to study what facebook has to offer and how it works instead of guessing what it is supposed to do and be disappointed.

  • Invisible Lines showing on Export

    Hello,
    I have done quite a bit of research before posting this however if I missed an article about it feel free to link me. I have designed artwork that uses lots of colors and lines. Everything was pretty much designed with lines and shapes and then I used live paint to paint in certain sections. The artwork looks perfect when exported as a GIF and it appears fine in Illustrator. The problem happens when I export the document as a PDF. When I export it as a PDF, tiny white lines show up where I have invisible lines in Illustrator. These invisible lines were put there in the first place so I could have set regions for the live paint without them showing. I'm not sure why they are showing up when I export.
    I have tried multiple PDF settings and also tried flattening the layers and attempting to use Transparency Flattener Presets and export it as a PDF 1.3 but it is still greyed out in the export options when I try.
    I've attached a screenshot of the PDF after it has been exported to see the lines. You will notice black lines and thicker white lines (like the one at the top), these are intentional. the ones that are undesired is the thin one near the bottom whre you can see theres a break point in color and then multiple ones going up. Deleting these with live paint selection, expanding the art, using direct selection tool to delete all ruin the art flow or do not work.
    Exported image:
    How it looks in illustrator:
    Thanks!

    They appear at any zoom.
    The last one is how it appears in Illustrator. 
    These are going to be printed for cover art and more material but as of now I need a nice PDF to send out so it can be zoomed in.
    Interesting enough, I just checked on another computer using Adobe Acrobat Reader, and to your point they do not show up. So it appears they are only showing up when I view the PDF on my Mac using Preview. I also viewed it in Safari and Chrome and they showed up there as well.

  • Boundary lines show in PDF

    I hope this is the right place to post this. If not, would someone tell me the best forum on which to post it?
    Some of my finished PDFs have boundary lines showing around--or sometimes even within--text boxes filled with color. The files were created in InDesign CS4 (same problem happened with CS3, however), and I've tried making PDFs all three ways (using the utility within ID, using Acrobat Pro 9, or using Distiller 9). I can eliminate the lines around the text box by using the "create outlines" command, but nothing I do in ID takes away any lines that appear within the text box.
    I have also tried using different PDF creation settings (X1-a, standard, high quality, etc.). "Standard" and "Smallest file size" take away the lines.
    Any suggestions and/or explanations would be much appreciated!

    My feeling is that LSI (and many other printers) specify Distiller PDF
    as their only legitimate source because it's easier for them to specify
    and support one (pretty good, BTW) source. They don't want to have to
    test, support, and specify all of the many different PDF sources. If it
    was a matter of choosing between Distiller and Indesign, they would
    probably choose Indesign, but books are made in many other programs,
    some of which have PDF export capability, and Distiller has quite a few
    competitors as well (Jaws is the one that I can remember, but there are
    quite a few others, some of which are pretty cheesy).
    Kenneth Benson
    Pegasus Type, Inc.
    www.pegtype.com

  • Safari 4.0 is slower to show only the first web site

    Safari 4.0 is slower to show only the first web site. Once Safari is open, the first site may take 4 to 5 seconds to show, and Console indicates:
    11/06/09 17:15:09 [0x0-0x99099].com.apple.Safari[1029] Debugger() was called!
    Subsequent sites load in just one second or so (and Console does not show any messsage).
    If I quit Safari and open it again, the same issue arises: it takes longer to show the very first site (whatever it is) but not the subsequent ones (for which it is quicker), and Console shows a similar string on such very first site (but not the subsequent ones). Other examples of such string:
    11/06/09 17:15:58 [0x0-0x9b09b].com.apple.Safari[1033] Debugger() was called!
    11/06/09 17:15:58 [0x0-0x9b09b].com.apple.Safari[1033] Debugger() was called!
    11/06/09 17:17:06 [0x0-0x9c09c].com.apple.Safari[1036] Debugger() was called!
    How to prevent such Console message and make Safari also quick to show the very first page or site after opening Safari?
    Thanks.

    Not to get your hopes up, did you ever hear or figure out any resolution to this. I have a (slightly) similar issue passed along from one of my bosses, that when he upgraded to 4.0.2 it started causing issues with FTP logins through Safari. He would have to enter passwords multiple times on the same site. So initial entry worked and then every subsequent event needed a password entry. Just curious if this could be part of your problem. I tried to emulate the problem on my machines and only on the one I have the 4.0.2 update does it happen.

  • Trace file out put line shows 18726 but wc -l lists only 165

    Friends,
    the output of the trace file show "18726 lines in trace file"
    when i run the linux command to count the number of lines
    $ wc -l filename.txt
    it shows only 165 lines.
    Also, the manual count shows 165 lines.
    so where are the remaining lines?
    the parameter for max file size is unlimited.
    thanks

    Even if you do not filter any result set (F.ex. SYS=NO), the tkprof output is generally an aggregate output (unless you specify AGGREGATE=NO). So a statement doing a 1000 fetches, would still show up as one.
    Even if you do specify AGGREGATE=NO, I doubt whether the line count in the original trace and converted text files will tally.

  • Why doesn't my Bus Cat Muse upload show up as a Temporary Site?

    I just finished the intro tutorial on Muse and uploaded the Katie's Bakery site as instructed in the tutorial. It is now "live" as a temporary site on the businesscatalyst.com domain. However, when I review my "My Assets" page (assets.adobe.com/websites), my Temporary Sites still show zero.
    When you publish a site from Muse to Business Catalyst, is that not considered a Temporary Site? If so, why does it not show up in My Assets? If not, what sort of site does show up as a Temporary Site? And in any case, how do I delete my tutorial site from business catalyst?

    OK, after some exploring and testing based on your posts, this is what I have discovered. Hopefully this will help others who are having similar problems.
    1. There does not seem to be any standard way of getting to https://assets.adobe.com/websites. When you go into assets.adobe.com, it comes up with a menu for Recent, Files, Mobile Creations, and Libraries, and the URL appends "assets" after the domain, as shown below:
    The page above does not give a menu option for Websites, even though you can get to Websites by typing it in directly, as shown earlier. It is that URL from which my original question came, for it is there that it shows my original screen print of 0 Launched Sites and 0 Temporary Sites. I don't even remember how I got there in the first place. But its existence appears to be a mistake on Adobe's part, otherwise I think they would provide an easy way to get there, as well as showing updated information. I did republish my test site, and that "Websites" page still shows zeros.
    2. Muse appears to publish a "Business Catalyst" site as a two-piece entity:
    a. A Trial Site at the Partner Portal
    Per the tutorial video at https://helpx.adobe.com/muse/how-to/muse-publish-site-business-catalyst.html, a Trial Site gets 30 days of up-time, and if you modify anything in the site from Muse, it extends the up-time for 2 weeks, up to a total time of 2 years.
    You can check the status of all of your Trial Sites at the Partner Portal site (http://ava-next.worldsecuresystems.com/PartnerPortal/Customers.aspx). Logging in to this site requires your global Adobe user ID and password. It lists all of your Trial Sites and gives you links to Preview, Manage, or Upgrade.
    It does not give you a link to Delete. To Delete, you have to Manage the site, by clicking on Manage as in the above screen print, which then takes you into the Business Catalyst part of the site. (See (1b) below.)
    b. A Business Catalyst site
    This is the site itself, and you get a URL to share with the world while your trial period lasts.
    If you append "/admin" to the end of that URL, you can manage the site. You can also manage it (and get to the same place) by clicking on Manage from the Partner Portal, as shown above.
    Once you get into the Manage part, you get site stats (visits, disk space, etc.) as well as links to either launch the site as one of your 5 free webHosting sites, or delete it by clicking on the link in the message "If you do not need this site you can simply delete the site."
    So, it appears that publishing and managing Web sites via Muse is a scattered proposition. There are three different places you might find information about what you have published. The first doesn't appear to work at all. The other two are related but are not easy to find. I think this is something Adobe should address, because at the very least, I truly had no idea what I had published, how to manage it, or how to get rid of it without extensive investigation. The whole publish-to-Business-Catalyst-from-Muse thing needs to be simplified and streamlined.
    Furthermore, some Adobe articles note that you can manage your site by clicking on the Manage top-menu item in Muse. However, in the very latest Windows version, that menu item does not exist. (It does in the Mac in the tutorials; the menu items include Plan, Design, Preview, Publish, and Manage. However, the Windows version--CC 2014.2--does not have Manage, even after you have published the site.)
    Also, one additional side comment: In CC 2014.2, when you publish the site to Business Catalyst, you may get the message "The currently associated site is not available to this user" before you click to publish. There is an unanswered discussion for that at My site won't publish. I keep getting error: "the currently associated site is not available to this user", but I discovered that this error comes up even if you have the correct user info in your Muse preferences. I published my test site anyway, despite that error, and it still published fine and I have access to manage the site. Truly I am "musing" over the overall way Muse publishes Web sites...

  • Video in Safari not playing -- one specific site only!

    I'm having a frustrating time trying to troubleshoot a problem with video content in Safari 5.1 on one particular site -- www.cleveland.com. The problem also occurred in Safari 5.0, but it's a recent thing -- video content on the site worked fine until about three weeks ago. I cannot recall installing an extention or anythning like that, but there may have been a system upgrade in there somewhere (maybe from 10.6.7 to 10.6.8?).
    What I get is a blank black box where the video should be playing. Video on all other sites works fine. The cleveland.com video uses a pop-up window for playing, and that window appears whether the built-in Safari pop-up blocker is on or off. The new window/player pops up, and there is content in that window, but the video box remains black.
    I've searched discussions here and at Adobe, reinstalled the Flash player, uninstalled, reset permissions, reset the developer web agent, turned hardware accelleration on and off, etc. -- a ton of solutions have been presented to fix the black screen of Flash, but none of them have solved my problems with this site.
    BTW, I get the exact same result in Firefox and Chrome. So it's something at the site or my system, right? I have asked the tech folks at the site, and they are not helpful. But they at least confirmed it is Flash content.
    Does anyone see something I am missing, or have other solutions to try?
    Thanks in advance,
    Jonathan
    Mac 10.6.8, Intel, Safari 5.1

    I'm having this same problem. On mobile websites before 3.0 update in safari, you would click to watch a video and it would open video viewer and i could watch them fine.
    Now you click on a video to watch and a bunch of random text starts showing on the screen, like it's trying to stream the video - but the ipod touch doesn't know what to do.

  • Upper lines showing File, Edit etc, gone

    Had to "restore to 2 days earlier" to get rid of music add-on, but found that top line showing "file, edit, tools, etc also disappeared. What did I do wrong? How do I get them back? Also "Back" arrow. Presently only shows "Firefox - Mozilla Firefox" (top line) and bars on next line showing site shown on screen. Center of page shows "google search". Help?

    Hello John.
    It's called the Menu Bar.
    Press ALT or F10 in your keyboard to make the Menu Bar temporarily visible. If you want it to be permanently visible, go into ''View > Toolbars > Menu Bar'', or right-click the Navigation Toolbar (the Reload button, for example) and select ''Menu Bar''.
    If this doesn't help, right-click the navigation toolbar, select ''Customize...'' and click ''Restore Default Set''. If it doesn't appear right away, try pressing ALT or F10. You can go into ''View > Toolbars > Menu Bar'' to make it permanently visible, or right-click the Navigation Toolbar and select ''Menu Bar''.
    If none of this helps, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Try disabling all add-ons (just to check), to see if Firefox goes back to normal.

  • Why are there two lines showing when I  switch off my iPad where the cancel word is?

    Why are there two lines showing on my iPad when I turn it off where the cancel word is.

    You wrote:
    "I have noticed that on my IPad Calendar, that on some of the scheduled appointments it is showing Phoenix as a time zone. On some it is showing Salt Lake City, and then on others it will show Denver. I can't quite see why or understand why that this is an issue since everything is set to Salt Lake City. On the ones that show up with Phoenix as the time zone the times change. Also I have had some of the times showing on the calendar at an hour different that when I open the Appointment. It will show the correct time, but on the Calendar it is sometimes different. "
    From that information, it makes sense that your calendar is off.
    Phoenix is in another time zone part of the year.   When daylight saving changed, Salt Lake City and Denver changed, but Phoenix did not.   You may have set time and date to auto, but the Mac knows the time difference and is compensating for it.

  • Grid Lines show up in certain print types.

    HP Officejet Pro 8600 all in one.Imac OS 10.6.8When ever I print in black and white mode for any size or type document or when I print in color to a single 4x6 photo page the vertical grid lines show up on the print.  I don't have this problem when I print the same 4x6 color photo on a full size 8x10 page.  I don't have this problem whenever I print any document in color.  I have deep cleaned the print heads and realigned the print heads several times; but I cannot lose the grid lines when I print in black and white and try to print color to the smaller format paper?   I love this printer otherwise.  Setup was easy, operation is user friendly, and it prints beautifully other than these two little annoying instances.  Can anyone offer a solution?

    Yes, I am experiencing this as well.  Thin black vertical lines about 2.8cm apart.  Initially I thought they were just on things sent to the printer from Photoshop, but now I see them on colour items I print directly from the copier and on an email attachment from my iPad.  At times the lines are barely visible ant that is what happened when I was talking wiht hp support.  It looked as though the problem had been solved after reloading the software onto my iMac.  But afterI hung up with them it happened again and when I went back to look at the other prints the lines were there too but not very visible.  I have cleaned and aligned the heads and replaced an empty yellow cartridge.  I printed a blank white sheet that had no lines.  I cannot figure it out.  Any suggestions anyone?

  • Problem accessing just one web site. No other site...

    I am having problems today connecting to just one website which I use daily.
    I get the "internet explorer can not display the webpage" message and the dropdown gives the usual possibilities.
    If I put the web address into "isitdownforeveryone or just me" then that reports the site up and running.
    I cleared all temp files/cookies, ran a full disk clean and cleaned all in IE that was cleanable. I did the ipconfig /flush DNS command and netstop and net start DNS cache commands and still no joy.
    While I kept trying I accidently clicked on the "diagnose problems" on IE failed to display page message and that said something like that "the host server at address 290.xxx.xxx etc had been found but fails to respond when pinged" and that resetting the network can fix problems. I then reset the BT Home Hub and low and behold I had instant access to the problem site. That was OK for the rest of the time the PC was on.
    This evening it has done exactly the same (just this one particular site down) and yet resetting the router has again fixed the issue.
    Why is this happening all of a sudden and why just seemingly one site affected ? Is it something I should contact BT over ?
    I run Vista and IE9.
    thanks 

    Thanks for all the replies folks...
    I haven't tried another browser (I like IE and didn't want to install something I don't really want) but I could do to aid trobleshooting if needed (I use Acronis so can roll back).
    Anyhow after all the trouble yesterday I unplugged the HH rather than doing a "soft" reset via the button. The site that was problematic is at the moment OK.
    If a site is unobtainable for whatever reason why does a reset of the HH "find" a path to the site only for it to fail again.  
    I see others have had similar issues although Bing.com is one I do use and that has been fine for me.
    Whether this is related or not I have no idea but after all the resetting of the HH i thought I would just try Speedtest.net to make sure my line profile hadn't suffered. The "ping" value was a little higher than normal but what was was odd was that the server automatically chosen to run the test was at the other end of the country rather than more local ones.   

Maybe you are looking for