Link between assets in different versions. (One update changes an asset in all 3 places)

I understand the hurdles it will take to give Adobe Muse the ability to create responsive sites, though I have very little knowledge of what it takes to make a change like this I wonder if there is a way to soften the blow of there being no true responsive option. My biggest problem with the 3 different versions (desktop, tablet, and phone) is the updating process. Every time I want to make an update, or a client makes an update, it has to be made in three separate places. This seems crazy to me - often times leading me away from creating a tablet version at all just so it is one less step. It would be great if there were a way to at least link assets between all three versions so that when one is changed all of them are updated. Like I said, I have no idea what goes into programming this software or how easy or difficult this would be to implement. In my opinion, this would be a great way to bridge the gap between the current Muse and a "perfect-world-responsive Muse".

Bottom line compare the SP number as directed to from HP based on part number from the FTP site not the F. number.
My problem wasn't quite that simple, though I wish it was. The Service Manual provided by HP for my computer through the P/N page did not have the processor that came with my computer when I purchased it brand new listed in the manual. I had to go through forums to find the correct service manual to get the specs and see what CPUs would work in an upgrade. When I did that usually the F number not the SP number was used. If using the SP number was standard I don't think I would have had so much of an issue. A big part of the reason I started the search and asked the question was I found references to people using the HP driver page and then upgrading the CPU based on the corresponding numbers provided in the service manual for my exact computer P/N and it not working. And this was both on this HP Forum as well as other forums.

Similar Messages

  • How can i navigate via navigational link between views in different windows

    hello
    i am using CRM_UI and have opened a popup
    gv_transcr_popup is a attribute referrring to if_bsp_wd_popup in my implementation class
    gv_transcr_popup = comp_controller->window_manager->create_popup(
        iv_interface_view_name = 'AIC_CM_TRANS/AssignTranspReq' "#EC NOTEXT
        iv_usage_name          = 'CUBAssignTransporReq'         "#EC NOTEXT
        iv_title               = lv_title ).
    get instance of BOL dynamic query
      lo_qs = cl_crm_bol_dquery_service=>get_instance( 'BTQAIC_CM_TRANSPORTREQ').
      gv_transcr_popup->set_on_close_event( iv_view = me iv_event_name = 'AssignTranspReq' ).
      gv_transcr_popup->set_display_mode( if_bsp_wd_popup=>c_display_mode_surrounded ).
      gv_transcr_popup->open(   ).
    through the iv_usage_name i will open in this popup a search view from another window
    in this window is a searchview implemented and now after selecting the line in the result view in want to navigate through outbound plug / inbound plug to the starting view .
    but i get the exception
    Target view AIC_CM_TRANS/TransportReq of the navigation is not assigned to the current window AIC_CM_TRANS/AssignTranspReq ( which is true)
    now the question: how can i navigate between views of different windows?
    Best Regards
    britta

    hi
    i have found a way : you have to use a outboungplug from the windows interface ..then it is working
    best regards
    britta

  • Link between reports and universes and universe name change

    I want to change a universe name.
    What is the impact on my WebI reports and DeskI reports ?
    Is it risky ? Will the link between reports and universes be saved ?
    Does someone know how the link between reports and universes works for WebI reports and DeskI reports ?
    Thanks

    Hello Umberto,
    I recommend to post this query to the [WEBI|SAP BusinessObjects Web Intelligence; and [DESKI|SAP BusinessObjects Desktop Intelligence; forums.
    These forums are monitored by qualified technicians and you will get a faster response there.
    Also, all Webi and Deski queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • Link between universes and reports and universe name change

    I want to change a universe name.
    What is the impact on my WebI reports and DeskI reports ?
    Is it risky ? Will the link between reports and universes be saved ?
    Does someone know how the link between reports and universes works for WebI reports and DeskI reports ?
    Thanks

    The Universe name is stored within the data context of the report so the report (deski and webi) refer to a Universe.
    Changing the name of that Universe has a very bad effect: the reports usually stop working!
    In order to change the name, you must manually visit each report and change the Universe associated with EACH QUERY IN EACH REPORT!!  It can be done, but it is time consuming.  And you'll need both Universe names in the CMS until you're done
    Deski -> View Data, Definition, Click on the ... beside the Universe
    Webi -> Edit Query, Properties, Click on the ... beside the Universe
    M

  • NLS settings for a database link between DBs with different character sets

    I am using a database link to move data from one database to another and I am seeing some strange data problems. The databases have different character sets and different NLS settings. I wonder if this could be causing my problem.
    Here are the NLS parameters for the database where the database link exists. (the SOURCE database)
    1     NLS_CALENDAR     GREGORIAN
    2     NLS_CHARACTERSET     WE8MSWIN1252
    3     NLS_COMP     BINARY
    4     NLS_CURRENCY     $
    5     NLS_DATE_FORMAT     DD-MON-RR
    6     NLS_DATE_LANGUAGE     AMERICAN
    7     NLS_DUAL_CURRENCY     $
    8     NLS_ISO_CURRENCY     AMERICA
    9     NLS_LANGUAGE     AMERICAN
    10     NLS_LENGTH_SEMANTICS     BYTE
    11     NLS_NCHAR_CHARACTERSET     AL16UTF16
    12     NLS_NCHAR_CONV_EXCP     FALSE
    13     NLS_NUMERIC_CHARACTERS     .,
    14     NLS_SORT     BINARY
    15     NLS_TERRITORY     AMERICA
    16     NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
    17     NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZR
    18     NLS_TIME_FORMAT     HH.MI.SSXFF AM
    19     NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZR
    Here are the NLS parameters for the database that the database link connects to. (the TARGET database)
    1     NLS_CALENDAR     GREGORIAN
    2     NLS_CHARACTERSET     AL32UTF8
    3     NLS_COMP     BINARY
    4     NLS_CURRENCY     $
    5     NLS_DATE_FORMAT     DD-MON-RR
    6     NLS_DATE_LANGUAGE     AMERICAN
    7     NLS_DUAL_CURRENCY     $
    8     NLS_ISO_CURRENCY     AMERICA
    9     NLS_LANGUAGE     AMERICAN
    10     NLS_LENGTH_SEMANTICS     BYTE
    11     NLS_NCHAR_CHARACTERSET     AL16UTF16
    12     NLS_NCHAR_CONV_EXCP     FALSE
    13     NLS_NUMERIC_CHARACTERS     .,
    14     NLS_SORT     BINARY
    15     NLS_TERRITORY     AMERICA
    16     NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
    17     NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZR
    18     NLS_TIME_FORMAT     HH.MI.SSXFF AM
    19     NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZR
    The SOURCE database version is 10g Release 10.2.0.3.0 - Production
    The TARGET database version is 11g Release 11.1.0.6.0 - 64bit Production
    Do I need to modify the NLS settings in the SOURCE database before executing a script to insert data into the TARGET database?
    Thanks, Jack

    The difference in settings is not a problem by itself, especially that only the NLS_CHARACTERSET matters. Of course, this difference may lead to certain issues if not taken into consideration.
    Please, describe symptoms of your problems.
    -- Sergiusz

  • Best way to move a site between farms running different versions of SharePoint.

    I will try and keep this short and summarize what we are trying to do to see if I am on the right track. I am at a new job and trying to clean up stuff that has collected over the years. I might be making this more difficult than necessary and looking for
    the easiest way to accomplish the goal which is:
    There is a team here that had a SharePoint 2007 WSS environment built for them years ago that they have been using and have a lot of historical data that they want to keep. It contains several (8) Sites in a single Site Collection. The sites are all very
    basic using out of the box web parts(Lists and Libraries). Nothing custom and security very basic (can be recreated if needed) which is all good. We want to consolidate this farm as it is the only thing on the farm and move it to our Intranet (running SharePoint
    2010 Enterprise). On the intranet we have a Managed Path configured for "Teams" which this site collection would fall nicely into based on usage policy and existing Governance. I am fine with them having their own Site Collection Database separate
    from what the other site collections that already exist. All of this really doesn't sound like it will be too hard. However I don't want to run out and buy any migration tools as it is just this one site that is moving and I should be able to do this with
    out of the box tools/powershell.
    Gotchas - 2007 WSS was on SP0. I just got done upgrading the 2007 environment to SP3. I think I needed to be at least up to SP2 but since I was upgrading them anyhow I went up to SP3. Intranet is running on SharePoint Server 2010 Ent SP1. This shouldn't
    be an issue as I am just jumping from 07->10 so as long as my 07 content DB is at a high enough patch level I should be able to move everything right over but will be working a project to upgrade to current SP on the Intranet after I am done with this initial
    consolidation and retirement of the 2007 WSS farm. 
    My thoughts on how to do this.
    The Team wants this to happen so they are willing to stop work on site for a day so I can do this is normal business hours which is really nice of them. I also have a test environment which is pretty close to prod to practice the process on. So my plan
    is to  grab a SQL backup and restore the Content DB to the SQL box for the 2010 Farm. Once the site collection's Content DB is on the right SQL box, use PowerShell to attach the Content DB to a new temp staging Web Application that I created for this
    process. Then backup and restore the site collection to the existing "Teams" Managed Path on the normal production Web Application. I assume to do this it would be best to use a "staging" Content DB for the initial SQL restore. Then set
    up a new "Production" Content Database for them to live on or point it to the existing Teams Content Database. I guess somewhere in here (after import) I should upgrade the site collection to 2010 look and feel. Let them know I am done and they can
    go back to work while I clean up all the staging stuff.
    Am I missing anything obvious here? I might have to do the Staging Web Application creation and cleanup after hours as I think I will need to do an IIS Reset. 
    Once all this is done then I start the project to upgrade the Intranet to 2013. 
    Thanks

    Much detail :) but as a shortcut you can use third party migration tools to have a seamless transition from old version to new. Few to mention, Methalogix and Quest tools. You may also leverage the trial version they offer which most probably cover your
    current situation. 
    The good thing about third party migration tools are you don't have to worry about template mapping nor security mapping. Of course for migration from very old version, like SP2003 to SP2010 requires the security mapping as it's totally different in structure.
    But from SP2007 on-wards the security hierarchy is basically same. One good thing to bear in mind is if you've custom solution there maybe some issue otherwise it's a smooth ride.
    Hope this helps :) 
    Yeah, I know there are shortcuts with third party migration tools but I really think they would be overkill in this case. While I thought of trials, I don't want to waste time going through a trial version only to find the finalize button is grayed out unless
    you pay for it and have to start over with something else. Though it isn't like I have that much data. Entire Site collection is 314MB when I look at storage used in Quotas and Locks. So if the trial was limited to 5GB or something then it would work. 
    I am doing this mini project now to avoid having to jump from 2007 to 2013 as we are getting pressure to get our intranet moved up to 2013. To do this move later would mean I would need to set up a 2010 environment to jump to  before moving them to
    2013 so might as well cram it in now before hand to save a bunch of work later on. As I mentioned, no custom solutions, no custom web parts, nothing but out of the box stuff. Not even the fab 40. So this should be as easy as can be. 
    Worst case that I can think of is that I might loose security. That isn't even that bad being it is a single site collection that I am dealing with. It is wide open to the entire team so just drop their entire AD Security group in Contributor and they would
    be back up and running. Go back and grant 1-2 people advanced permissions and they should be set. 
    Besides the way I look at it, going the PowerShell route is a good refresher for me as it may be similar when I do the move to 2013. We have the upgrade of not only the Intranet but our external web site as well. 

  • Links between two separate PDF documents - one as reference for another.

    Hello, everyone.
    I have a special project that I believe would be best addressed with the creation of two independent but linked PDF files. Let me be more detailed.
    My plan is to create a PDF file as a text document. In this text document there will be numerous references to documents and articles that I intend to place in a second PDF file. I would like the user to be able to open the text document PDF on the left side of his computer screen and also open the reference PDF with documents and articles on the right side of his computer screen. Every time the user comes across a section of the document that offers a link to an external reference the user would be able to click on it and the PDF on right would display the page corresponding to the reference on the PDF on the left. I hope this makes sense.
    Is it possible to create PDFs with this type of relationship ? I am guessing that in order for these links to work both PDFs will have to reside in the same directory so that the links (relative links in this case) may work properly. Is this true ? How can I make this work and is there a good document I can read or tutorial I can watch that would describe this in detail ?
    Thanks in advance for your help.

    Hello, try67.
    Considering what you share I don't think this solution is the right one for me. I am trying to find a simple solution that would allow me to accomplish this task. Considering it would require scripting or programming the solution has just become more complex than what I feel I can comfortably handle.
    Thank you anyway for your help.

  • My new yahoo mail has no control buttons ie compose, delete, move and so on, no functions at all. I loaded the latest firefox version, but no change. I have all buttons and controls in Internet Explorer.??? please help, I want to continue with Firefox

    The yahoo mail page listing my email headers load OK, but no email buttons show and the links showing do nothing. Can't open , read, reply or forward or compose new. nothing works on the page.

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    *http://kb.mozillazine.org/Website_colors_are_wrong
    *https://support.mozilla.org/kb/Websites+look+wrong

  • Relative linking between tables no longer supported?

    With the Numbers 3.1 update, relative linking between cells in different tables no longer seems to work. That means that if I want to pull the value of one cell into a cell in another table, now if I reorder either table, the value that gets passed changes. Up to this 3.1 update, Numbers was able to keep it straight if you sorted one (or both) of the tables.
    This is bad (for me, anyway). Am I missing something? Thanks.
    Doug

    I'm not even using a formula. I'm simply saying take the value of a cell from one table and pull it into another table.
    I have two tables (Grades and Participation). In the Grades table, I'm pulling the summed participation score for each student from the Participation table. So, for Student A, in the Grades table, I have a cell in their row of scores:
    =Participation::All Sections::R3
    This makes the cell equal to the cell R3 on the table "All Sections" on the sheet "Participation" (yes, the tables are on different sheets; this shouldn't matter).
    This works, but if I resort the table "Participation," say by last name only instead of by section number/last name or by student number, the student who lands on Row 3 is different, and R3 is the number for a different student. But on the Grades table, the student in Row 3 has stayed the same. And the number for that student is now wrong.
    In Numbers 3.01, I think this worked correctly. So, if you resorted, Numbers was able to keep it straight in the other table. In Number 2.3 it surely worked correctly, because I can test it, and here's how Numbers 2.3 references that same cell. Instead of simply referencing the cell R3, it uses a unique identifer that references the email field in each row - like so:
    =Participation::All Sections::Participation [email protected]
    That way, if I resort, everything stayes aligned across tables. Numbers 3.1 is no longer doing this.
    Anyway, that's the problem. I hope it makes sense. Thanks.
    Doug

  • Linking between jar files

    I'm trying to create links between topics of different jar files but cannot get it to work.
    have tried a few different ways to do this:
    <a href="jar:file://../jarfilenam.jar!/htmlfilename.htm">
    <a href= "../jarfilename.jar!/htmfilename.htm">
    <a href="/jarfilename/htmfilename.htm"> none work. Any insights?
    thanks
    Margaret

    Hey Margaret,
    we have the same problems. Did you found a solution?
    The funny thing is: sometimes a reference in the style
    works - but not constantly! We had three references in this style in one html-page and the first one of them works in our development environment. In the productive environment (with WebStart-technology) no link works. It's also not clear, to witch object the path should be relativ: from the folder, the HTML-page resides? Do you need one more "../" to step outside the jar?
    By the way: does anyone knows, how JavaHelp finds it resources like GIF's, wich are referenced from HTML-pages? If I have the same filename in more than one JAR, it's normaly not defined, which one is loaded with the getResource-method of the class loader, or am I wrong?
    We have different JAR-files with same resources, for example "hallo.gif". In each JAR-file is a HTML-page, wich loades this GIF. If I delete the GIF in one of the JARs, the HTML-page in this JAR doesn't display the GIF. The other HTML-page works still fine. It looks like the resources are only searched in the same JAR. Am I right??
    thanks
    Olaf

  • How can I handle deploying multiple test systems on the same PC that have been developed using different versions of LabVIEW, TestStand, and/or Switch Executive?

    The major issue here is that the test systems must be documented and validated before being released to the production floor. Given this if a test station has multiple test systems deployed on it that have been developed on various versions of LV, TS, and Switch exec how can I force the test system selected to use the correct versions of TS, LV, and Switch exec.? I understand that the solution would be to recomplie everything and bring them up to the latest version but that would then require re-validation according to the QA department. Any advice would be greatly appreciated.
    It would be nice if theTS deployment was more like an LV executable... meaning when a LV executable is launched it always knows what LV runtime engine to use when there are multiple engines installed on a PC.

    Hi,
    Multiply versions of teststand can reside on the same system, but only one version can run at a time. They is a utility that has to be run to set the active version.
    The SequenceFiles have a version number, and you will find an error will be generate if you try to Load the sequencefile in the wrong version of TestStand.
    The labview VIs will only work providing the correct version of the RTE is also installed on your system, even a labview executabe requires the correct RTE to be installed, either as part of the executable installation or as a seperate installation, before the labview exe will work correctly.
    I'm not fimilar with the Switch exec but I would expect that it will also require the correct lower level device drivers to be available for the version you are using.
    Therefore, as you are indicating that some of your system are at  a older version, its difficult to image how you could achive this, considering if you say you have different versions of the software(s). For a start, you may have the problem that newer code/ sequencefiles using additional functionatily not available in the older versions.
    I would think your only solution would  be to have different deployments covering the different versions you have, or at least bring all your test systems up to the same version of teststand.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Link between db's..

    Hi,
    Steps to create the link between databases on different machines.
    Regards,
    Usman

    user create database link commnad
    CREATE DATABASE LINK db_link_name
    CONNECT TO db_schema IDENTIFIED BY password
    USING 'tnsnames_entery'
    to check table from the other db. use
    select * table_name@db_link_name
    fadi

  • Gantt chart- How to change the color of time bars of different versions

    Hi All,
    My Client wants to see all changes in planning schedule. I made different versions of these changes but he also want to see all these changes in gantt chart and in different colors. I tried to change the color in planning board assistant but in this screen (CJ27/ CJ2B). we cannot view all versions together. And if I use CN41, there I cannot change the colors of time bars.
    Secondly, we can change colors of times bars of basic dates, forecast dates and actual dates but there is no provision to change the colors of schedule bars of different project versions. Kindly reply-
    1. How to see all project versions in CJ27 or How to customise bar chart in cn41 or if we change in SPRO, then how to change graphic profile in project info profile
    2. How to change colors of different time bars of different versions.
    3. How to mention these legends (meaning of each color in chart) at footer of gantt chart (in print outs)
    Please Help.
    Thanks & Regards
    Dinesh Chauhan

    Thanks,
    actually I've created new project planning board profile where planning board assistant is customized but unable to use this profile in CN41. we can change PS info profile in CN41 and that;s why I thought that planning board profile may be assigned somewhere in PS info profile so that changes in planning board assistant will be applied in CN41 through PS info profile. Graphic profile is too complex to understand and not sure if it will help to get colored time bars of projct versions in gantt chart. Still not clear.
    Secondly not able to see all versions (snap shots) in gantt chart with different colors of time bars.
    I mean planning board screen can be customized but we cannt see different versions here which are possible in CN41, but we cannt customize the gantt chart (time bars) in CN41. Pls help.
    Thx & Regards
    Dinesh Chauhan

  • Link between Class and characteristics created for that class

    Hi All,
    Is there any table that I can look at to find a link between class and the characteristics created for that class. For all the list of characteristics created I am refereing to CABN table but my requirement is to find the logic to see all the characteristics created for a class. Can anyone suggest me the right table to look at?
    Regards,
    Shane

    Hi,
    I would like to thank you for your quick response. So based on your thoughts, here is the process i followed to find the characteristics for a existing class,  took the Internal class number and used the KSML table to find all the Characteristics created for that class.
    To find the list of values assigned to that characteristics, used the AUSP table for that characteristics internal number.
    Thank you again for your inputs
    Shane.

  • Link between documents and update the version

    Hi
    I have linked documents between different sites in Sharepoint. When I change the contain in the main documents and the Version is change from 1.0 to Version 2.0. Now the version for the linked document is still Version 1.0 in the document
    list. How can I manage that the linked document shows the same Version number as the main document when it is updated?  

    Hi
    I copy the shortcut to the main document and add New document (link to a document) in a different folder than main documents.
    It is the documents version number as you can see in the Version history. Hope that is answer to your question.  

Maybe you are looking for