LINK BETWEEN BATCH & OPERATION NO
HI ALL
I GENERATE A BATCH IN A PROD ORDER AGAINST A OPERATION NO . NOW I GENRATE A Z REPORT , IN REPORT I WANT OPERATION NAME AGAINST THE BATCH NUMBER BUT I DONOT FIND THE LINK PL TELL ME THE LINK BETWEEN BATCH NO & OPERATION NO.
REGARDS
NAVEEN
Hi Naveen,
Ok if you need to get workcenter name then logic goes as below.
From AFRU table get AFRU-ARBID.
And Get Workcenter name from CRHD Table using OBJTY EQ 'A' and OBJID EQ AFRU-ARBID. If you need Workcenter Text also then write code as below mentioned query:
SELECT SINGLE AOBJID AARBPL B~KTEXT_UP INTO ICRHD
FROM CRHD AS A INNER JOIN CRTX AS B
ON AOBJID = BOBJID
WHERE A~OBJTY EQ 'A'
AND A~OBJID EQ IAFRU-ARBID.
Hope, this is what you require.
Regards,
Arpit
Similar Messages
-
Link between batch stock and stock transport order no.
hello all,
my client want the report for stock in hand against batch and sto no..in standard tcode mb52(stock in hand) we can see the stock against batches.but i want the report for which sto no. stock is recieved corresponding to batch.
pls tell me from which table and field i should pick data for stock against sto no.
thanks in advance for ur valuable input
regards
simran
caution-- we are using two step procedure with stock transport order for transferring the material between plantsS
-
Linking MIC & Batch characteristic
Hey All
My understanding is that to move values from batch characteristic to MIC we need to maintain the link in MIC and this relationship is one to one relationship.
We have a business requirement as below. I do 2 types of testing i.e. official & vendor. First i do vendor testing and this will be reflected in the batch. After this i do official testing and this needs to overwrite the vendor results and update the batch automatically.
If i have to use the batch characteristic + MIC link, then i need to create 2 batch characteristics & 2 MIC's / test i perform on the material.
Is there a way by which i can have multiple link between batch characteristic & MIC and manage this link via some user exit or
do you have some suggestions on how to handle this business requirement?
Regards
TOMYou only need one inspection characteristic.
You don't indicate in your process how or when these two types of inspection happen.
You can create a source inspection lot with the tests the you use to record the vendor results on.
Then when you receive the material, you have an 01 inspection lot created for recording your actual results.
The second set UD on the 01 lot will over write the batch record results from the first source inspection.
If you have one inspection lot that is created at goods receipt, use two operations. Operation 10 has the vendor tests. Operation 20 has the in-house testing. When the UD is made the test results from the last operation will be written to the batch record.
Craig -
Link between storage location and batch number to retrive the salk3 field
HI,
In my report i need to give the output as follows
For each lgort with related batch number we need to get the salk3.So i need to get a link between lgort , batch number to retrive the salk3.can any one give the tables from which i can get the link and retrive the data.
note: My report output should look like the fields lgort batch and unrestriced value of stock in tcode mb52.
subhashini.
Edited by: subhashinikb on Apr 1, 2011 9:38 PMHi,
In 2 steps, u can get the unrestricted stock value.
step1: Get material no (MATNR), plant (WERKS), batch (CHARG) and unrestricted stock (CLABS) from table MCHB by sending Storage location and batch number.
Step2: Get standard price STPRS from table MBEW based on condition where MATNR = MCHB-MATNR, BWKEY = MCHB-WERKS and BWTAR = MCHB-CHARG.
unrestricted value in MB52 will be (MCHB-STPRS) * (MCHB-CLABS). -
Technical link between a PM order and its operations (routing number)
Hi all,
I would like to know how to make link between a PM order and its routing number for operations in the order (field AUFPL) ?
Thank you.
Regards.
Laurent.Hi again,
I just found function module CO_DB_HEADER_READ.
With Order Number as import parameter you got in export parameter CAUFWA value AUFPL.
Then with +AFV+* tables, you have operations data.
Regards.
Laurent. -
Link between Oder number, Operations and PRT ?
Hello,
I am trying to find the link between Ordeer number (T-code IW32) , its Operations and PRT linked to Operations.
Can someone shed some light on the links for these in PM tables ?
Thanks.
Regards,
Rajesh.Hi,
Not sure of the table links..
Use the BAPI BAPI_ALM_ORDER_GET_DETAIL..to get the operations, PRT other details for the service order..
Thanks
Naren -
Link between Bin Location and Batch Number
Hello.
I'm having some issues to find an link between the Bin Location and Batch Number.
I've searched through OBIN, OIBT, OBTN, OWTS, but no clue of what makes the link between this guys.
Does anyone here know something about that?
Best Regards.Hi Araujo
Check this out > SAP Business One 9 - List Of New Tables posted by Posted by Kennedy T in Reporting and Printing it might help.
Des -
Link between Ivnoice A/R (OINV) and Ivnoice A/P (OPCH)
Hi!
Is it possible to find some link between Ivnoice A/R (OINV) and Ivnoice A/P (OPCH) without using batches, serial numbers and UDFs?
Any ideas?
Thanx!
Regards,
DavidHi David,
I only known of 1 link possibility.
If you created the purchase order from the sales order (and the invoices are based on the orders) you can find the purchase invoice through the Purchase order, Sales Order, Sales Invoice.
Regards
Ad -
hi all,
i have a problem regarding relation or link between sales and production order. i have to fetch production order number related to sales order number. i have checked in the table AFPO that is production order item table , there is field AFPO-KDAUF and AFPO-KDPOS ie, sales order and sales item. but when i see these two fields there is no data into the field so how can i get data into the table related to production order.can anyone help me on this issue.Please refer to the below links -
https://forums.sdn.sap.com/post!reply.jspa?threadID=309885
Integration points with MM/IM and PP are some of the following -
When a Production order is created and released a reservation gets created for the materials in BOM
When the reservation is created and materials are posted against the reservation with mvt type 311 these are transferred to the respective location.
When a GR is posted with mvt type 101, the Finished or Semifinished goods are posted to the respective storage location and inventorized.
When a consumption is posted with mvt type 261 then stock will get reduced in resepective storage location.
When a batch determination is done in a production order basing on the batch search strategy and sort rule material, quantity and batch are selected.
If WM is configured an associated internal movement for all the above movement types will be posted.
During MRP, BOM which is a master data for PP is used to calculate the dependent requirements of materials.
During availabilty check of a production order basing on the availability check configured materials will be selected and checked.
Hope the above may help you. -
How to get the link between mara, ausp, cawn and cawnt tables
hello ABAPERS
i have got a requiremet in that i have to get the relation .
how to get the link between mara, ausp, cawn and cawnt tables and also type how can we get link between char value and char description in cawn and cawnt tables through ausp and mara tables.
I would be very thankful for ur help in advance.
Thanks & Regards.
soniHi,
Sample report using the linkage between tables;
report batch_char no standard page heading
line-size 132
line-count 58(1)
message-id mm.
Report by Batch Characteristic *
Description : Report by Batch Characteristic *
Declaration for Tables
tables: mara, " Material Master
mard, " Storage Location Data for Material
t001w, " Plants/Branches
t001l, " Storage Locations
cabn, " Characteristics
inob. " Link between Internal Number and Object
Declaration for Constants
constants : c_klart like ausp-klart value '023', " Class Type
c_obtab like inob-obtab value 'MCH1', " Database Table
c_flag type c value 'X', " Flag
c_c23 type i value '23', " Ratio
Constants for Ratio Categories
c_13 type p decimals 2 value '13.00', " For Ratio 13
c_1499 type p decimals 2 value '14.99', " For Ratio 14.99
c_15 type p decimals 2 value '15.00', " For Ratio 15
c_1699 type p decimals 2 value '16.99', " For Ratio 16.99
c_17 type p decimals 2 value '17.00', " For Ratio 17
c_1899 type p decimals 2 value '18.99', " For Ratio 18.99
c_19 type p decimals 2 value '19.00', " For Ratio 19
c_2099 type p decimals 2 value '20.99', " For Ratio 20.99
c_21 type p decimals 2 value '21.00', " For Ratio 21
c_2299 type p decimals 2 value '22.99', " For Ratio 22.99
c_23 type p decimals 2 value '23.00', " For Ratio 23
c_g23(4) type c value '>=23', " For Ratio >=23
c_ratio(5) value 'RATIO', " For Ratio
Constants for Storing Selected item field information
c_cursor1(15) value 'I_OUTPUT1-MEINS', " For Selected Base
" Unit of Measure
c_cursor2(15) value 'I_OUTPUT1-MATNR', " For Selected Base
" Material Number
c_cursor3(15) value 'I_OUTPUT1-MAKTX', " For Selected Base
" Material Des.
c_cursor4(15) value 'I_OUTPUT1-CLABS', "For Selected Base
" Stock Value
c_cursor5(15) value 'I_OUTPUT1-ATFLV', " For Selected Base
" Char.Value (Ratio)
c_cursor6(5) value 'C_G23'.
Declaration for Global Variables
data : g_exit type c, " Flag
g_clabs1(16) type c, " Quantity
g_clabs(18) type c, " Quantity
g_cursor(15) type c, " Cursor field name
g_matnr type mara-matnr, " Material Number
g_werks type mchb-werks, " Plant
g_atinn(30) type c. " Character.
Declaration for Internal tables
Internal table to hold Batch Stock data
data : begin of i_mchb occurs 0,
matnr like mchb-matnr, " Material Number
werks like mchb-werks, " Plant
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Unit of measure
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb.
Internal table to hold Secondary List data
data : begin of i_mchb1 occurs 0,
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
atinn like ausp-atinn, " Char.Value
clabs like mchb-clabs, " Stock Value
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb1.
Internal table to get the Plant Name
data : begin of i_plant occurs 0,
werks like t001w-werks, " Plant
name1 like t001w-name1, " Name
end of i_plant.
Internal table to get the Material Description
data : begin of i_makt occurs 0,
matnr like makt-matnr, " Material
maktx like makt-maktx, " Description
end of i_makt.
Internal table to hold AUSP data
data : begin of i_ausp occurs 0,
objek like ausp-objek, " Object No
atinn like cabn-atinn, " Characteric value
atflv like ausp-atflv, " Characteristic Value
end of i_ausp.
Internal table to hold output data
data : begin of i_output occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv like ausp-atflv, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output.
Internal table to hold final Output data
data : begin of i_output1 occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv(32) type c, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output1.
Selection screen
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks for t001w-werks obligatory, " Plant
s_lgort for t001l-lgort, " Stor.Location
s_matnr for mara-matnr obligatory, " Material No
s_atinn for cabn-atinn. " Character.
selection-screen end of block b1.
At selection screen
at selection-screen.
Validation of Selection Screen Fields
perform validate_screen.
Start of selection
start-of-selection.
Get the Material and Batch Stock data from MARA and MCHB Tables
perform get_mat_stock_data.
Get the Material Group Text and Plant Name from T023T and T001W Tables
perform get_plant_grp_data.
Append the data into final Output Internal Table after getting the
Characteristic Values data from INOB and AUSP Tables
perform append_final_data.
Processing if the Characteristics contain 'RATIO'
perform collect_ratio.
End-of-Page
end-of-page.
write /1(125) sy-uline.
End of selection
end-of-selection.
if g_exit <> c_flag.
Display the Report Output data
perform display_report.
endif.
Top-of-Page
top-of-page.
Write the Report and Column Headings
perform get_headings.
at line-selection
at line-selection.
if sy-lsind = 1.
perform display_batch.
endif.
Top of page during line-selection
top-of-page during line-selection.
perform heading_seclist.
Form validate_screen
Validation of Selection Screen fields
form validate_screen.
Validation of Plant
clear t001w.
if not s_werks[] is initial.
select werks
into t001w-werks
from t001w
up to 1 rows
where werks in s_werks.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Plant'(002).
endif.
endif.
Validation of Material Number
clear mara.
if not s_matnr[] is initial.
select matnr
into mara-matnr
from mara
up to 1 rows
where matnr in s_matnr.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Material'(003).
endif.
endif.
Validation of Storage Location
clear t001l.
if not s_lgort[] is initial.
select lgort
into t001l-lgort
from t001l
up to 1 rows
where lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Storage Location'(004).
endif.
endif.
Validation of Characteristic Value
clear cabn.
if not s_atinn[] is initial.
select atinn
into cabn-atinn
from cabn
up to 1 rows
where atinn in s_atinn.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Characteristic Value'(005).
endif.
endif.
Validation of Plant, Material and Storage Location
clear mard.
select matnr werks lgort
into (mard-matnr, mard-werks, mard-lgort)
from mard
up to 1 rows
where matnr in s_matnr and
werks in s_werks and
lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'No Data found for the Selection Criteria'(006).
endif.
endform. "validate_screen
*& Form get_headings
Write the Report and Column Headings
form get_headings.
data: l_repid type sy-repid.
l_repid = sy-repid.
call function 'Y_STANDARD_HEADING'
exporting
repid = l_repid
heading1 = sy-title.
write:/1(125) sy-uline.
format color col_heading on.
write : /1 sy-vline, 2(18) 'Material Number'(008) centered,
20 sy-vline, 21(40) 'Material Description'(011) centered,
61 sy-vline, 62(22) 'Ratio'(009) centered,
84 sy-vline, 85(18) 'Quantity'(010) centered,
103 sy-vline, 104(20) 'Base Unit of Measure'(015) centered,
125 sy-vline.
write:/1(125) sy-uline.
format color off.
endform. "get_headings
*& Form get_mat_stock_data
Get the Material and Batch Stock data from MARA and MCHB Tables
form get_mat_stock_data.
clear: i_mchb,i_output, i_output1.
refresh: i_mchb,i_output, i_output1.
select a~matnr " Material Number
b~werks " Plant
b~lgort " Storage Location
b~charg " Batch Number
b~clabs " Stock Value
a~meins " Base Unit of Measure
into table i_mchb
from mara as a inner join mchb as b
on amatnr eq bmatnr
where b~matnr in s_matnr and
b~werks in s_werks and
b~lgort in s_lgort.
if sy-subrc <> 0.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
stop.
endif.
sort i_mchb by matnr werks lgort charg.
endform. " get_mat_stock_data
*& Form get_plant_grp_data
Get the Material Group Text and Plant Name from T023T and T001W
form get_plant_grp_data.
if not i_mchb[] is initial.
Get the Plant Description from t001w Table
clear i_plant.
refresh i_plant.
select werks " Plant
name1 " Name
into table i_plant
from t001w
for all entries in i_mchb
where werks = i_mchb-werks.
Get the Material Description from MAKT Table
clear i_makt.
refresh i_makt.
select matnr " Material number
maktx " Material Description
into table i_makt
from makt
for all entries in i_mchb
where matnr = i_mchb-matnr and
spras = sy-langu.
sort i_plant by werks.
delete adjacent duplicates from i_plant comparing werks.
sort i_makt by matnr.
delete adjacent duplicates from i_makt comparing matnr.
endif.
endform. "form get_plant_grp_data.
*& Form append_final_data
Append the data into final Internal Table
form append_final_data.
data : l_matbatch(28),
l_tabix like sy-tabix.
if not i_mchb[] is initial.
loop at i_mchb.
l_tabix = sy-tabix.
clear l_matbatch.
concatenate i_mchb-matnr i_mchb-charg into l_matbatch.
move-corresponding i_mchb to i_output.
Get the Plant Description from i_plant Table
read table i_plant with key werks = i_mchb-werks binary search.
if sy-subrc = 0.
i_output-name1 = i_plant-name1.
endif.
Get the Material Description from i_makt Table
read table i_makt with key matnr = i_mchb-matnr binary search.
if sy-subrc = 0.
i_output-maktx = i_makt-maktx.
endif.
Get the Characteristic Values data from INOB and AUSP Tables
clear inob.
select single cuobj from inob
into inob-cuobj
where klart = c_klart and
obtab = c_obtab and
objek = l_matbatch.
if sy-subrc = 0.
select objek
atinn
atflv
from ausp
into table i_ausp
where objek = inob-cuobj and
atinn in s_atinn and
klart = c_klart.
sort i_ausp by objek atinn.
loop at i_ausp.
clear cabn.
select single atinn atnam from cabn
into (cabn-atinn,cabn-atnam)
where atinn = i_ausp-atinn.
if sy-subrc = 0.
If the ratio value is between 13-14.99, display 13
if cabn-atnam cs c_ratio.
if i_ausp-atflv between c_13 and c_1499.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_ausp-atflv between c_15 and c_1699.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_ausp-atflv between c_17 and c_1899.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_ausp-atflv between c_19 and c_2099.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_ausp-atflv between c_21 and c_2299.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_ausp-atflv >= c_23.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_23.
endif. " Condition for RATIO values
else. " If characteristic does contain RATIO
i_mchb-atflv = i_ausp-atflv.
endif.
i_output-atinn = cabn-atinn.
i_output-atnam = cabn-atnam.
i_output-atflv = i_ausp-atflv.
i_mchb1-matnr = i_mchb-matnr.
i_mchb1-werks = i_mchb-werks.
i_mchb1-lgort = i_mchb-lgort.
i_mchb1-charg = i_mchb-charg.
i_mchb1-clabs = i_mchb-clabs.
i_mchb1-atinn = i_ausp-atinn.
i_mchb1-atflo = i_mchb-atflv.
i_mchb1-atflv = i_ausp-atflv.
append : i_output, i_mchb1.
clear i_mchb1.
modify i_mchb index l_tabix transporting atflo atflv .
endif.
endloop.
endif.
endloop.
endif.
Checking whether the table is filled or not
if not i_output[] is initial.
sort i_output by atinn werks matnr atflv.
else.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
endif.
Delete the records where RATIO is less than 13.
delete i_output where atnam cs c_ratio and atflv lt c_13.
endform. "append_final_data
*& Form display_report
Display the Report Output data
form display_report.
data: l_tabix like sy-tabix.
loop at i_output1.
l_tabix = sy-tabix.
At new Characteristic
at new atinn.
read table i_output1 index l_tabix.
format color 1 intensified on.
write: /1 sy-vline, 2(20) 'Characteristic Name:'(007),
23(40) i_output1-atnam,
125 sy-vline.
format color off.
format color 4 intensified on.
write: /1 sy-vline, 2(20) 'Plant Name :'(022),
23(4) i_output1-werks, 29(30) i_output1-name1,
125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
clear: g_clabs, g_clabs1.
format color col_normal.
write :/1 sy-vline, 2(18) i_output1-matnr,
20 sy-vline, 21(40) i_output1-maktx,
61 sy-vline.
if i_output1-atflv = c_c23.
write: 62(22) c_g23 centered.
else.
shift i_output1-atflv left deleting leading space.
write: 62(22) i_output1-atflv centered.
endif.
write: 84 sy-vline,
103 sy-vline,
110(5) i_output1-meins.
If the quantity value is negative
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
hide : i_output1.
new-line.
At end of material
at end of matnr.
sum.
move : i_output1-matnr to g_matnr.
format color 3 intensified on.
write /1(125) sy-uline.
write :/1 sy-vline, 2(25) 'Total for Material :'(012),
28(18) g_matnr.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
write: 125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
At end of plant
at end of werks.
sum.
move : i_output1-werks to g_werks.
format color 3 intensified off.
write :/1 sy-vline, 2(25) 'Total for Plant :'(013),
28(4) g_werks.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
At end of characteristic
at end of atinn.
read table i_output1 index l_tabix.
sum.
format color 3 intensified on.
write :/1 sy-vline, 2(25) 'Total for Characteristic:'(014),
28(25) i_output1-atnam.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
endloop.
endform. " display_report
*& Form DISPLAY_BATCH
Display the batch details for the seclected material *
form display_batch.
Get the batch details for the selected material
get cursor field g_cursor.
if g_cursor = c_cursor1 or
g_cursor = c_cursor2 or
g_cursor = c_cursor3 or
g_cursor = c_cursor4 or
g_cursor = c_cursor5 or
g_cursor = c_cursor6.
format color 3.
write: /1 sy-vline,
2(17) 'Material Number :'(020),
20(17) i_output1-matnr,
94 sy-vline.
format color off.
write /1(94) sy-uline.
loop at i_mchb1 where matnr = i_output1-matnr and
atinn = i_output1-atinn and
atflo = i_output1-atflv.
format color col_normal.
shift i_mchb1-charg left deleting leading '0'.
write :/1 sy-vline, 2(16) i_mchb1-lgort centered,
18 sy-vline, 19(17) i_mchb1-charg centered,
36 sy-vline.
if i_output1-atnam cs c_ratio.
write: 37(29) i_mchb1-atflv
exponent 0 decimals 2 centered.
else.
write : 37(29) i_mchb1-atflv
exponent 0 decimals 0 centered.
endif.
write : 66 sy-vline, 67(27) i_mchb1-clabs unit i_mchb-meins,
94 sy-vline.
format color off.
endloop.
write /1(94) sy-uline.
else.
message s899 with 'Invalid cursor position'(016).
exit.
endif.
endform. " DISPLAY_BATCH
*& Form HEADING_SECLIST
Write the Column Headings for Interactive Report
form heading_seclist.
write /1(94) sy-uline.
format color col_heading on.
write :/1 sy-vline, 2(16) 'Storage Location'(021),
18 sy-vline, 19(17) 'Batch Number'(017) centered,
36 sy-vline, 37(29) 'Characteristic Value'(018) centered,
66 sy-vline, 67(27) 'Quantity'(019) centered,
94 sy-vline.
write /1(94) sy-uline.
format color off.
endform. " HEADING_SECLIST
*& Form COLLECT_RATIO
Display the Characteristic ratio data
form collect_ratio.
loop at i_output.
clear g_atinn.
i_output1-atinn = i_output-atinn.
i_output1-atnam = i_output-atnam .
i_output1-werks = i_output-werks.
i_output1-name1 = i_output-name1.
i_output1-matnr = i_output-matnr.
i_output1-maktx = i_output-maktx.
i_output1-clabs = i_output-clabs.
i_output1-meins = i_output-meins.
call function 'CONVERSION_EXIT_ATINN_OUTPUT'
exporting
input = i_output-atinn
importing
output = g_atinn.
if g_atinn cs c_ratio.
If the ratio value is between 13-14.99, display 13
if i_output-atflv between c_13 and c_1499.
i_output1-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_output-atflv between c_15 and c_1699.
i_output1-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_output-atflv between c_17 and c_1899.
i_output1-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_output-atflv between c_19 and c_2099.
i_output1-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_output-atflv between c_21 and c_2299.
i_output1-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_output-atflv >= c_23.
i_output1-atflv = c_23.
endif.
write i_output1-atflv to i_output1-atflv .
else.
write i_output-atflv to i_output1-atflv exponent 0 decimals 0.
endif.
collect i_output1.
clear i_output1.
endloop.
sort i_output1 by atinn werks matnr atflv.
endform. " COLLECT_RATIO
Reward if useful..
Regards,
Anji -
How to get the link between MCH1, AUSP, CAWN and CAWNT tables
Hi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
KumarHi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
Kumar -
What is the differene between filter operation and NL semi join?
Hi, all.
The oracle is 10gR2 and 11gR2.
There are differences between filter operation and HASH/MERGE semi join in processing subqueries.
But I could not see the difference between filter operation and NL semi join?
(the only thing I know is that filter operation has caching mechanism, but I am not sure in case of NL semi)
What are the pros and cons of each of them?
Thanks in advance.
Best Regards.>
The oracle is 10gR2 and 11gR2.
>
Those aren't 'version's. What are the 4 digit versions?
>
There are differences between filter operation and HASH/MERGE semi join in processing subqueries.
>
What are they? When you make a statement like that post the information (and links to it) that backs up your statement.
>
But I could not see the difference between filter operation and NL semi join?
(the only thing I know is that filter operation has caching mechanism, but I am not sure in case of NL semi)
>
We can't 'see the difference' either; you didn't post anything for us to look at.
>
What are the pros and cons of each of them?
>
Each of what? Again - you need to be as specific as possible if you want specific feedback.
Also, since you generally should not use hints in production code anyway what difference does it make what the differences are? Oracle will make the choice.
Without anything specific to comment on about all we can do is provide several links that talk about joins and how to produce and examine them. These are all from Jonathan Lewis's Scratchpad:
http://jonathanlewis.wordpress.com/?s=semi-join
http://jonathanlewis.wordpress.com/2010/12/20/index-join-4/
http://jonathanlewis.wordpress.com/2010/08/15/joins-mj/ -- merge joins
http://jonathanlewis.wordpress.com/2010/08/10/joins-hj/ -- hash joins
http://jonathanlewis.wordpress.com/2010/08/09/joins-nlj/ -- nested loop joings
http://jonathanlewis.wordpress.com/2011/06/08/how-to-hint-1/ -- how to hint for joins
Check out those articles. Pay attention to how, in each one, he doesn't just provide a text description but also provides code and explains the code.
In other words he provides all of the specific information needed to illustrate what he is talking about. That is what you need to do if you need help with a specific topic: provide the query, plans and output that you yourself are using as the basis of your question. That lets us see EXACTLY what you are talking about. -
How to create database link between oracle and SQL Server
Hello Everyone,
Here i have Oracle Database 9i and SQL Server 2005 databases.
I have some tables in sql server db and i want to access from Oracle.
How to create a database link between these two servers
Thanks,Thanks for Everyone,
I was struggle with this almost 10 days....
I created Database link from Oracle to SQL Server
Now it is fine.........
Here i am giving my servers configuration and proceedure how i created the db link...@
Using Generic Connectivity (HSODBC) we can create db link between Oracle and SQL server.
Machine (1)
DB Version : Oracle 9.2.0.7.0
Operating System : HP-UX Itanuim 64 11.23
IP : 192.168.0.31
Host : abcdbt
Machine (2)
Version : SQL Server 2005
Operating System : Windows server 2003 x86
IP : 192.168.0.175
Host : SQLDEV1
User/PW : sa/abc@123! (Connect to database)
Database : SQLTEST (exsisting)
Table : T (“ T “ is the table existing in SQLTEST database with 10 rows)
Prerequisites in Machine (2):
a) Oracle 10g software
b) User account to access SQL Server database (sa/abc@123!)
c) Existing SQL Server Database (SQLTEST)
d) Tables (testing purpose) (T)
Steps:
1) Install Oracle 10.2.0.1 (Only SW,No need of database) *(Machine 2)*
2) Create a DSN where your windows Oracle 10g SW resides *(Machine 2)*
Control panel >> Administrative Tools >> Data Source (ODBC) >> System DSN ADD
You can follow this link also.....
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
I created DSN as
DSN name : SQLTEST
User : SA/abc@123! (Existing user account)
Host : 192.168.0.175 (machine 2)
Already I have 1 database in SQL Server with the name SQLTEST
You can create DSN with different name also (not same as db name also)
3) Create a hsodbc init file in $ORACLE_HOME\hs\admin *(Machine 2)*
Create init<DSN NAME> file
Ex: initSQLTEST
Copy inithsodbc to initSQLTEST
And edit
initSQLTEST file
HS_FDS_CONNECT_INFO = SQLTEST <DSN NAME>*
HS_FDS_TRACE_LEVEL = OFF*
save the file....@
4) Configure Listener.ora *(Machine 2)*
LISTENER_NEW =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
SID_LIST_LISTENER_NEW =
(SID_LIST =
(SID_DESC =
(SID_NAME = SQLTEST) *+< Here SQLTEST is DSN NAME >+*
(ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
(PROGRAM = hsodbc))
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
(PROGRAM = extproc) )
:> lsnrctl start LISTENER_NEW
5) Configure tnsname.ora *(Machine 2)*
SQLTEST11 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = SQLTEST))
(HS=OK)
:> tnsping SQLTEST11
If No errors then conti….
6) Configure a file *(Machine 1)*
Cd $TNS_ADMIN ($ORACLE_HOME/network/admin)
Create a file
$ vi TEST_abcdbt_ifile.ora
something=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST =192.168.0.175) (PORT=1525))
(CONNECT_DATA=
(SID=SQLTEST))
(HS=OK)
$ tnsping something
$ sqlplus system/manager
Your connected to Oracle database *(machine 1)*
create database link xyz connect to “sa” identified by “abc@123!” using ‘SOMETHING’;
select * from t@xyz;10 rows selected.
Thanks,
Edited by: ram5424 on Feb 10, 2010 7:24 PM -
Can I use Unix symbolic links between Mountain Lion and Snow Leopard Mail folders?
After upgrading to Mountain Lion, I partitioned my iMac HD to have two partitions: Macintosh HD has Mountain Lion; I reinstalled Snow Leopard on Macintosh HD 2. Best part: you can access your user-created files from EITHER disk partition. But not so OS X Mail. I wanted to revert to Snow Leopard, since I don't like the iOS-like Mountain Lion (swipe THIS!), but Mail is a problem since all my Snow Leopard Mail was successfully migrated over to Mountain Lion during upgrade.
Is there a way to use Unix symbolic links between actual OS X Mail folders in Mountain Lion and OS X Mail in Snow Leopard?
It seems the (trial) symbolic link created pointed to a blank file.It's not a matter of "letting" each maintain its own database, William. By default, I believe, I have no control over what gets written. In fact, if there were a way to set a preference that says, use this index named "spotlightindexSL' only [while in SL], that might solve my problem. Then when booting up in ML, it would just go after the index it last made.
My guess is that while I am in ML or SL and not the other, there are all sorts of changes to files and the system freaks and says "Oh, now look at what a mess I've made — there are all sorts of files unaccounted for. Now I have to rebuild the whole thing."
I have 2 had drives in my Mac, both 500GB. One (Working Disk) has no operating system and all my files, and the other drive is partitioned 470/30gb with SL on the 470 and ML in the 30. When I restart in either OS, the auto-start Indexing as if for the very first time, and do both hard drives (in total: 3 partitions of files, not counting the ML Restore partition).
I know it all uncoventionally — just wanted to see what my $20 new OS will cost me in software upgrades, in particular my $1800 Adobe Design Suite CS4 and a few others. -
Hi,
i created a dblink from 8i to 9i.
some simple query can be executed successfully:
select * from tablename@dblink
However, when use join method. It prompted me with following error:
ORA-02068:following servere error from dblink
ORA-03113: end-of-file on communication channel
does anyone know how to correct it??
Many thanks,
TommySubject: Client / Server / Interoperability Support Between Different Oracle Versions
Doc ID: Note:207303.1 Type: BULLETIN
Last Revision Date: 26-OCT-2005 Status: PUBLISHED
Oracle Client / Server Interoperability Support
Introduction
This note gives a summary of the support for interoperability between Oracle client and server versions. This includes support for connections over database links between Oracle versions. Note that this relates to support for investigation of defects / ability to obtain bug fixes.
For a summary of the support status of each Oracle release see Note 161818.1
General Policy
Oracles general policy is to test and support each new Oracle release for compatibility with older releases thus:
Test the NEW client to each OLDER server release where the OLDER release is still covered by Premier Support (formerly Primary Error Correction support) at the time that the NEW version is released.
Test OLDER clients to the NEW server release where the OLDER release is still covered by Premier Support (formerly Primary Error Correction support) OR is in the first two years of Extended Support (formerly Extended Maintenance support).
Tests between the NEW version and other OLDER releases may be added where Oracle deems it sensible to support interoperability between those releases.
Current Interoperability Support Situation
The matrix below summarizes client and server combinations that are supported.
New interoperability problems will only be investigated if BOTH releases involved are covered by a valid support contract at the time that the issue is reported .
eg:
An 8.1.7 client to a 9.2.0 server issue requires the customer to have a valid Extended Maintenence support contract for the 8.1.7 client in order for Oracle to investigate it.
Server Version
Client Version 10.2.0 10.1.0 9.2.0 9.0.1 8.1.7 8.1.6 8.1.5 8.0.6 8.0.5 7.3.4
10.2.0 Yes Yes Yes #5 No EMS No #3 No #3 No #3 No #3 No #3
10.1.0(#4) Yes Yes Yes Was EMS #2 No #3 No #3 No #3 No #3 No #3
9.2.0 Yes #5 Yes Yes Was EMS No No Was No No #1
9.0.1 No Was Was Was Was Was No Was No Was
8.1.7 EMS EMS EMS Was EMS Was Was Was Was Was
8.1.6 No No No Was Was Was Was Was Was Was
8.1.5 No No No No Was Was Was Was Was Was
8.0.6 No No Was Was Was Was Was Was Was Was
8.0.5 No No No No Was Was Was Was Was Was
7.3.4 No No Was Was Was Was Was Was Was Was
Key:
Yes Supported
EMS Supported for customers under Extended Maintenance (EMS) only.
Was Was a supported combination but one of the releases is no longer covered by any of Premier Support , Primary Error Correct support or Extended Maintenance Support so fixes are no longer possible.
No Has never been Supported
Specific Notes:
#1 - See Note 207319.1
#2 - An ORA-3134 error is incorrectly reported if a 10g client tries to connect to an 8.1.7.3 or lower server. See Note 3437884.8 .
#3 - An ORA-3134 error is correctly reported when attempting to connect to this version.
#4 - There are problems connecting from a 10g client to 8i/9i where one is EBCDIC based. See Note 3564573.8
#5 - For connections between 10.2 and 9.2 the 9.2 end MUST be at 9.2.0.4 or higher. Connections between 10.2 and 9.2.0.1, 9.2.0.2 or 9.2.0.3 are not supported.
General Notes:
For database links between different Oracle versions connections must be supported in BOTH directions in the matrix above.
eg: As 9.2 -> 7.3.4 is not supported then database links between these version are not supported in either direction.
Unsupported combinations may appear to work but can encounter errors for particular operations. The fact that they appear to work should not be relied upon - issues on unsupported combinations will not be investigated.
Since new database servers are compatible with a limited set of older OCI clients, it may not be necessary to upgrade the client software when upgrading the database. However, some new features may not work without upgrading the client software. So, for example, an Oracle 7.3.4 client is able to connect to an Oracle8i database, but is not able to take advantage of newer features such as Transparent Application Failover (introduced in v8).
Oracle Applications , or other Oracle products, may have supported configurations not listed in the matrix above.
The matrix above also applies between different platforms and between 32/64 bit releases of Oracle client / server except where any Oracle platform desupport notice indicates otherwise .
Terminology
Maybe you are looking for
-
Dependent master data for the Transaction data
Hi, Wish u Happy New Year to All. I use to schedule daily some 250 master data.Then i will run transaction data.Because of this the system performance is effecting.I want to know, where i can find dependent master data objects for the particular tran
-
I have a scenario where I would be reading a input file and invoke a Soap adapter and then get back the response and write to another output file. So, i need to configure two asyncronous file adapters(one for inbound and one for outbound) and one syn
-
Error - The file must match the template type. Upload one file per language
hi, Error - The file must match the template type. Upload one file per language and territory combination. i am getting above error while registering RTF template in oracle application e -business suite using XML publisher admistrator responsibility.
-
How to get out of tex edit mode with a single button?
Hey, Is there a way to escape from text edit mode with a single click or button? So far I always hit CTRL+Enter, then V and then I click away from the canvas so that the paragraph ain't higlighted no more. But thats a pain in the butt! Cant there be
-
HT201272 I show that a book I purchased has been downloaded to my computer, how do I read it?
I downloaded a book to my computer, how do I read it?