Link between instance & contract no.

HI,
Can any one tell me how to find the link between instance no . and contract no. basically link between ibin & crmd_order_index tables. Kindly help . It is greatly appreciated.
BYe

Hi,
Use FM:CRM_SERVICE_CONTRACTS_SEARCH to get the link.
where OBJECT_ID is the contract number
COMPONENT is the instance no
Regards,
PePe

Similar Messages

Link between sales contract and down payment

Hi all,
Is there a way to link sales contract with down payment if down payment is created before sales contract?
Please respond.
Best Regards,
AI.

Hi,
You can check this to start: Re: Help.. Query for document trail
Thanks,
Gordon

Link between contract and service order.....urgent

hi...
plz tell me the link between contract,in VA43 transaction .....and ....
i want the service order fields...
reply soon..
thanks in advance

Hi
Pass the contract number EBELN and Item EBELP to ESLH table and take the Service pack number
or from EKPO take the AUFNR field (order No) and goto AFKO and AFPO and take the details
Reward points for useful Answers
Regards
Anji

Link between Contract line and the Billing Plan number

Hi All,
I have a requirement which needs a link between the Contract Line item and its Billing Plan Number. I basically have to find out the contracts which have a billing block. So a invoice would not have been created to that line item.
Please let me know if such a link exists.
Thanks in advance,
jr.

Hello
In table VBKD (Sales Document: Business Data) you will find the link between the contract (VBELN) and the billing plan (FPLNR). If POSNR = '000000' then this is the billing plan of the contract header.
The billing block can be found in VBAK-FAKSK.
Finally, billing plan details can be found in table FPLA. If FPLA-RFPLN is filled then the item billing plan is linked to the header billing plan.
Regards
Uwe

Table link between contract document and billing document

Hi,
Please let me know the table link between contract data and its billing plan nnumber.
Regards,
bhaarathi.

VBKD is the Table name
if Ordertype "G" <--- that means It is a contract
From VBAK and VBAP you can get the Contract Details for the Order Type "G"
Go to Table VBKD, with the contract and get the billing plan .
FPLNR <--- is the Billing plan
Here you get the relation Between Contract and Billing Plan

DB LINK between XE and 11g instances

Hello ,
I am facing the following problem.
I have 3 databases instances on 3 servers on is Xe,the second is 10 R2 and
the third instance is 11g.
I have create db link between Xe and 10g and vice-versa (10g and Xe)
the db links in the two senses are working fine.
But i could not create db link between xe and 11g nor between 11g and Xe.
I will give some detail
On Xe dblink pointing to 11g , when accessed give the message :
"ORA-01017 : Invalid username/password;logon denied ORA-02063 preceding db11g"
i am sure that user name and password i give in db link creation are correct and tried it many times.
From the other side
On 11g dblink pointing to Xe instance when ,accessed give the folowing result :
i could access some table (select * from t1@dbxe)
but some times i got message : "Internal server Error" for the same select on the same table.
When i try to access fonction f1 on dbxe from 11g instace , i got the message
"ORA-04052 : Error when quering remote object f1@dbxe ORA-00604.."
Does any body have some idea about the issue ?
thanks in advance.

Is your 11g database configured to use case-sensitive passwords? If so, are you specifying a case-sensitive (quoted) password in the creation of your database link?
Joel

HRMS Payroll: Migrating Element Links between Environments/Instances

Hi,
I need to migrate element links between environments i.e, I need to move my element links from one instance to another.
Apart from doing this manually or using dataloader, what are the other options/best practices that I can look at?
Regards,
Santhosh Jose

We've previously done this successfully using Data Pump to process the migration of Element Types, Input Values, Extra Info and Links - once set up it works very smoothly, but it does require quite a bit of setup so I'd only advise using if you're migrating a lot of elements several times.
Data Pump is just a set of tables and concurrent programs that wrap around Oracle API's for migration of data/setup.
The setup involves getting data into these tables...
Key tables are:
hr_pump_batch_lines
hr_pump_batch_headers
hr_pump_batch_line_user_keys
Using API's like:
hrdpp_create_element_type.insert_batch_lines
hrdpp_create_element_extra_inf.insert_batch_lines
hrdpp_create_element_link.insert_batch_lines
hrdpp_create_input_value.insert_batch_lines
hrdpp_update_input_value.insert_batch_lines
Conc Program: Data Pump Engine
There should be plenty of documentation around the net and MoS about this if you want to have a read.
Alternatively you can call the API's yourself.
or, you can have a go with iSetup - we tested this briefly but didn't get too far with it, several quirky issues with loading Work Structure data so went back to using Data Pump.
Regards, Jay

Link between GTM and FSCM (sales or purchase order hedging)

Hi all,
I am trying for a few days to have SAP GTM working (I am in an IDES ECC6 system, and as far as I know in EhP4 version). The main goal in fact is to test the currency hedging, and therefore to the link GTM and FSCM, either single-sided purchase or sales order, or two-sided . The flow I want is the following :
-     I buy or sell a product, in GTM, through a trading contract which generates a purchase or sales order.
-     Automatically a currency hedge is generated to cover the risk, in FSCM, I guess in exposure management.
-     And then the financial products (derivatives) are generated as well.
No problem to create the trading contract, no problem to generate the sales or purchase order. But in spite of the (very little) customizing I found in u201CSAP GTM => currency hedgesu201D, and some in FSCM, in u201Ctreasury and risk managementu201D, no way to have this link between GTM and FSCM, no additional document is generated like a Forward Exchange Transaction (I guess I should have this, and then a risk exposure in FSCM).
Would you have an idea ? Is this customizing, or an additional Business Functions or Extension Set not activated ? SAP says : u201Cit worksu201D, but canu2019t find the way.
Thank you very much for your help, I am quite looking for this link for a few days now u2026
Best regards
Patrick

Yes Mr Ashish!
As far as iam concern there is no link between Project & Customer Master, you have to link it with SALES order, I had check in XD03,XD01, the complete customer master, i didnt find any field in customer master which links with Project.
I'll let you know if i find any links.
Regards,
ANSAR

How do i remove the link between my apple ID and my mobile number?

i decided to move away from iPhone a couple of days ago as a result of renewing my contract. When I got my new phone, I factory re-set it and handed it in to my network provider as part of a recycling scheme. Since getting my new phone, when people send me texts they are still sending as iMessages. I have logged onto my iTunes and removed my iPhone from the account but still nothing. How do I completely remove the link between my mobile nuber and iMessenger?

Contact Apple support to deactivated iMessage: https://www.apple.com/support/appleid/contact/

Link between G/L Account and profit center

Hello dear all,
I have an issue in Intra-company process.
I made 2 customer payment for 2 different company code:
1/ Company 1000: i have 2 line items posted (in G/L View)
2/ Company 2000: For the same Cash account and the same customer account used in my first case (with company 1000) i have 4 line item posted in the G/L view and with different " PARTNER PROFIT CENTER"
I do not know wher can i find in customizing the link between G/L Account and Profit center ?
Thank you in advance

The document splitting is active in your company, at the same time, the "zero balance" for profit center is activated in your doc split characteristics. In order to balance the profit center in General View, it creates another line item for balancing it which is the zero balancing account or split the cash account according to profit center assignment. For some cases, they are split equally that is why it is best that you assign the profit center in the cash account upfront and create line item for each payment with different profit center assignment.
For instance, there are two customer line items with different profit center assignment
Customer Line Item 1 = Assigned to Profit Center 2000 amount 500
Customer Line Item 2 = Assigned to Profit Center 3000 amount 500
When I post a payment of 1000, the Entry View is
Cash                 1000
    Customer                1000
GL View
Cash       PC 2000       500
     Customer PC 2000         500
Cash      PC 3000        500
     Customer PC 3000          500

Link between Credit Risk Category and Terms of Payment

Hi,
Is there a link between the Credit risk category and the terms of payment. Where can we maintain this.
For instance, if risk category is x, the top is a, risk category is y, top is b.
Please suggest.

There is no link between credit risk category and Terms of Payment. The Risk Category is assigned to credit limit of the customer which determines if it will be blocked at certain level for sales transactions or just a warning message that the customer is over the limit. For the terms of payment, it just determines when it's due or whether it's overdue or not.

XI R2 link between CUID and the file name in the I-FRS

Hi,
I would like to know how can I make the link between the file name of a webi document in the I-FRS and the CUID of this document in XI R2.
In the activity universe, I made a report showing a list of webi document with their CUID.
I would like to find them back in a backup of the I-FRS.
In XI R3 it appear that the name of the webi document in the I-FRS is the CUID of this document.
Vincent

I'm sorry but you're in a really, really bad place. I've thought about this and can only come up with one idea.
Webi docs in XIR2 cannot be opened directly as a crystal report or deski file can. You would need the rich client in XI 3.1 in order to open any of the .wid files stored in your I/O folders. And even then, you might get a security error when opening since the docs were created inside another environment.
But if you open a webi doc with wordpad, it will give you the document name as well as a bunch of other info. Make sure you use wordpad and not notepad, otherwise formatting will make it near impossible to read. Search for this section:
<DOCUMENTPROPERTY NAME="name">Average Refresh Time</DOCUMENTPROPERTY>
Unfortunately, there's really no easy way to do this. Start with the Input FRS since those represent your report templates. The Output FRS are all of your scheduled instances. Since you have the auditing db, you could report off of it to give yourself a unique list of all report names and start cross referencing what you find doing the wordpad trick. But I don't see an easier way. Windows doesn't see the .wid file as text and therefor won't search within the file when doing a text search. It'll only search the file attributes. The bigger problem I see is even when you have your list of document names matched to a physical file, what are you going to do with it? Importing a loose Webi doc into XIR2 isn't possible. Plus, you're still missing the universes and universe connections. Your webi docs rely on these to process. Your only chance would be to try the XI 3.1 Webi Rich Client and see if that allows you to open but you'll still have the universe problem.
I wish I had better advice for you. Ultimately if you could find a backup of the CMS db somewhere that would help tremendously. Without it, you have next to nothing.

Link between SD MM FI HR PP

Hi All,
Can anybody tell me the links between SD, MM, FI, HR, PP modules with Table name and Field Name. It will be of immensly helpfull.
Thanks in Advance.
Ajoy

hi
good
PP-SD
Availability Check, MTO Scenario-MRP Run, Reqmt Types etc..
PP-MM
Goods mvmts -Backflush, Auto GR, Creation of Purch. Requisitions, Purchase orders during MRP etc..
PP-CO
Cost Center, Order Type - Settlement Profile, Product cost Collector, Cost Estimate, WIP etc..
Link Between SAP SD, MM & FI
1. In SAP you will always get integration with other modules. SD will interact with FI, MM will interact with SD :-
1a. Looking at MM and SD interaction first, take the scenario of a third party order process. This process uses a purchase order (which is sent to your vendor). Also invoice verification is used further along the process to check that the invoice you send to your customer is the same material and quantity as that which the vendor sends to you (but obviously shipped
directly to your customer).
1b. Billing is an SD function. But SAP needs to know, when processing a customer's payment, to which GL account the payment has to be processed. For instance payment of a UK based material would be placed in a different GL account to that of a non-UK based material. Furthermore, a UK based customer may have a different GL account to that of an Export customer. This is configured in Account Determination.
2. ABAPers are there to essential do some bespoke development. Your integration, or interaction, with them would be when specifying the tables, fields, input fields, a simple process explanation, data mapping (if doing an interface from one system to another) etc. *-- Shahee
The link between SD and MM :-
1. When you create sales order in SD, all the details of the items are copied from Material master of MM.
2. MRP and availibility check related data is also taken from MM although you control this data in SD also.
3. While you create inbound/outbound delivery with reference to a sales order,the shipping point determination takes place with the help of the loading group, plant data, shipping conditions etc. This also refers to Material Master.
4. The material which you are entering in a sales order must be extended to the sales area of your sales order/customer otherwise you cannot transact with this material.
There are many such links between SD and MM.
Now the link between SD and FI :-
1. Whenever you create a delivery with reference to a sales order, goods movement takes place in the bacgground. eg. In case of standard sales order, you create an outbound goods delivery to the customer.
Here movement 601 takes place. This movement is configured in MM. Also, this movement hits some G/L account in FI. Every such movement of good s hits some G/L account.
2. The accounts posting in FI is done with reference to the billing documents (invoice, debit note, credit note etc) created in SD. Thus this is a link between SD and FI
3. Tax determination: In case of a tax determination also, there is a direct link between SD and MM
SD Integration points with other modules
SD module is highly integrated with the other modules in SAP.
Sales Order
Integration Points Module
Availability Check - MM
Credit Check - FI
Costing - CO/ MM
Tax Determination - FI
Transfer of Requirements - PP/ MM
Delivery & Goods Issue
Integration Points Module
Availability Check - MM
Credit Check - FI
Reduces stock - MM
Reduces Inventory $ - FI/ CO
Requirement Eliminated - PP/ MM
Billing -
Integration Points Module
Debit A/R - FI/ CO
Credit Revenue - FI/ CO
Updates G/ L - FI/ CO
(Tax, discounts, surcharges, etc.)
Milestone Billing - PS
Return Delivery & Credit Memo -
Integration Points Module
Increases Inventory - MM
Updates G/ L - FI
Credit Memo - FI
Adjustment to A/R - FI
Reduces Revenue - FI
Tips by: Subha
SD Transaction Code Flow:
Inquiry / Document type IN
Tcode for creation VA11,VA12,VA13. tables VBAK,VBAP
Quotation / QT
Tcode for creation VA21,VA22,VA23. tables VBAK,VBAP
Purchase Order PO
Tcode for creation ME21,ME22,ME23. tables EKKO,EKPO.
Sales Order OR
Tcode for creation VA01,VA02,VA03. tables VBAK,VBAP
Delivery LF
Tcode for creation VL01,VL02,VL03. tables LIKP,LIPS
Billing MN
Tcode for creation VF01,VF02,VF03. tables VBRK,VBRP
To create a sales order we need purchase order number and custmer number. Before that, to create a purchase order we need to have material no, vendor no.
To create vendor tcode is
xk01(create), xk02(change) , xk03(display)
Tables are lfa1.
To create custmer tcode is xd01, xd02, xd03.
Table is kna1.
After creating sales order using this no we can create delivery note tcode is vl01.
reward point if helpful.
thanks
mrutyun^

How to create database link between 2 servers to exports schemas

Could any one please give Steps to create database link between 2 servers (linux) to exports schemas like AR, INV, GL.......etc

Hi Mouni,
As i suggest above, please use the REMAP_SCHEMA parameter, so that you can create those objects which are getting created in the Apps Schema in the XBSI schema, I have already provided the syntax above.
ORA-31684: Object type VIEW:"XBSI"."XBSI_ORDER_LINE_INFO_V" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_SERIAL_NO_V" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_ONHAND_BALANCES" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_PURCHASE_ORDERS" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_ORDER_HEADER_INFO_V" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_ORGANIZATION_ITEMS" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_PE_FIND_RESULT" already exists
You are facing these errors as you have already done the import, and when you try to re-import it says those objects are already available. If this fresh import, Please drop the the new user you have already created in the Datawarehouse instance, and recreate the User and start a fresh import.
Hope this help!
Thanks &
Best Regards,

Differentiate between quantity contract and value contract?

Hi,
How can i differentiate between quantity contract and value contract?
The agreement type of contract is is not MK or WK , its custom created.
regards
N Banu

Hi
In Qty Contract you limit the total quantity of items that required for you;
It sums the partial quantities of Release Orders with the Contract as a reference.
In a Value contract, you limit the total value of items to be required when
you create Release Orders with the Contract as a reference, that is you
don't work with the quantities as in the first case, but indeed with the
quantities multiplied by the unit price you fixed in the Contract
Refer the link for details
http://www.erpdb.info/qquantity-contracts/
http://help.sap.com/saphelp_crm40/helpdata/en/d2/650e26a21fe04bba5298afd089b9dd/content.htm
Regards
Anand

Link between instance & contract no.

Similar Messages

Maybe you are looking for