Link goal with screenflow on default summary screen

Hi Guys
Is there any way on the default summary screen that you can force the investigation of a goal to use a flow?
Consider
You have a goal to invesitgate
You have a defined flow
You want to be able to display the goal summary with decision report access at the end - just as if you were investigating the goal without the flow.
I just want the one goal investigation to be displayed at startup - and the normal goal conclusion on the final summary screen (complete with DR link).
Currently I have both the goal and the flow on the summary screen with rules to hide the goal if it is unknown and show the flow - and the reverse when the goal is known (show the goal and hide the flow). This gives me the effect I want, but is a bit cludgy. Is there a way to force a summary screen goal to use a flow?
Thanks
Roger

The approach of specifying goals and flows separately gives the most flexibility over what is shown to the user, and what you are doing sounds like the right way to achieve what you want.
Davin.

Similar Messages

I created a word document with hyperlinks. When my default browser is Chrome the hyper links work. When the default browser is Safari, the hyperlinks bring to pages that just lines and lines of symbols. I need these links to work in both browsers.

I created a word document with hyperlinks. When my default browser is Chrome the hyper links work. When the default browser is Safari, the hyperlinks bring to pages that just lines and lines of symbols. I need these links to work in both browsers. Any ideas?

version 10.6.8

When I plug my iphone in to synch with itunes the summary screen doesn't come up. It starts synching everything. I only want to synch music.

When I plug my iphone in to sync with itunes the summary screen does not come up. I only want to sync music. It starts synching everything.

Disable automatic syncing.
Whatever is selected under the various tabs for your iPhone sync preferences will go through the process of being checked - if there are any changes in regards to the data you have selected to be synced with or transferred from your computer regardless.

Problem with the default selection screen condition

hi guys,
I have got some problem with the default screen given by the PNP logical database, P0000 infotype automatically populated according to the condition given in default screen.
Reg,
Hariharan

Don know what u r trying to acheive.
1) when u have specified PNP in the logical databse field of attributes of program, the SAP wil proivde u default PNP screen and here u can also add ur paramters if u want.
2) in the program u have to declare like
INFOTYPES: 0000,0001. "Etc
for all the infotypes u want to use in the program.
3) it is the GET PERNR event which wil fil all the p0000 and p0001 (internal tables for al the infotypes declared via INFOTYPES syntax as shown above)
4) after tht get pernr, u now have data in P tables and u can use it for further reporting.
5) refer below dummy code -
REPORT ZPPL_PREVEMPLOYERS   message-id rp
                             line-size 250
                             line-count 65.
*Program logic :- This Report is used to Download all the Previous
* Employer (IT0023) records of the employees
*eject
*& Tables and Infotypes                                                *
tables: pernr.
infotypes: 0000,
           0001,
           0002,
           0023.
*eject
*& Constants                                                           *
constants: c_1(1)       type c               value '1'   ,
           c_3(1)       type c               value '3'   ,
           c_i(1)       type c               value 'I'   ,
           c_x(1)       type c               value 'X'   ,
           c_eq(2)      type c               value 'EQ' ,
           c_pl03       like p0001-werks     value 'PL03'.
*eject
*& Selection-Screen                                                    *
parameters: p_file like rlgrap-filename default 'C:TempABC.xls',
            p_test as checkbox default c_x               .
*eject
*& Internal tables                                                     *
* Internal Table for Output
data: begin of t_output occurs 0    ,
       pernr like pernr-pernr       ,
       nachn like p0002-nachn       ,
       vorna like p0002-vorna       ,
       orgeh_stext like p1000-stext ,
       plans_stext like p1000-stext ,
       begda like p0023-begda       ,
       endda like p0023-endda       ,
       land1 like p0023-land1       ,
       arbgb like p0023-arbgb       ,
       ort01 like p0023-ort01   .
data: end of t_output           .
*eject
*& Variables                                                           *
data: o_stext like p1000-stext,
      p_stext like p1000-stext.
*eject
*& Initialization                                                      *
Initialization.
* Initialize Selection-Screen values
perform init_selction_screen.
*eject
*& AT Selection-screen                                                 *
at selection-screen .
* Check if Test run selected, download file name should be entered
if p_test is initial. "
    if p_file is initial.
      message e016 with 'Please enter file name'
                        'specifying complete path'.
    endif.
endif.
*eject
*& Start-of Selection                                                  *
Start-of-selection.
get pernr.
clear t_output.
* Read Infotype 0
rp-provide-from-last p0000 space pn-begda pn-endda.
check pnp-sw-found eq c_1.
* Check if employee is active
check p0000-stat2 in pnpstat2.      "pernr Active
* Read Infotype 1
rp-provide-from-last p0001 space pn-begda pn-endda.
check pnp-sw-found eq c_1.
* check if employee belongs to PL03
check p0001-werks in pnpwerks. "belongs to PL03
* Check if emp belongs to Active Group
check p0001-persg in pnppersg.
* Read Infotype 2
rp-provide-from-last p0002 space pn-begda pn-endda.
check pnp-sw-found eq c_1.
* Read Org Unit Text.
CALL FUNCTION 'HR_READ_FOREIGN_OBJECT_TEXT'
     EXPORTING
          OTYPE                   = 'O'
          objid                   = p0001-orgeh
          begda                   = p0001-begda
          endda                   = p0001-endda
          reference_date          = p0001-begda
     IMPORTING
          object_text             = o_stext
      EXCEPTIONS
          nothing_found           = 1
          wrong_objecttype        = 2
          missing_costcenter_data = 3
          missing_object_id       = 4
          OTHERS                  = 5.
*Read Position Text.
CALL FUNCTION 'HR_READ_FOREIGN_OBJECT_TEXT'
     EXPORTING
          OTYPE                   = 'S'
          objid                   = p0001-plans
          begda                   = p0001-begda
          endda                   = p0001-endda
          reference_date          = p0001-begda
     IMPORTING
          object_text             = p_stext
     EXCEPTIONS
          nothing_found           = 1
          wrong_objecttype        = 2
          missing_costcenter_data = 3
          missing_object_id       = 4
          OTHERS                  = 5.
* Gather all the required information related to the emp
move: pernr-pernr to t_output-pernr,
        o_stext to t_output-orgeh_stext,
        p_stext to t_output-plans_stext,
        p0002-nachn to t_output-nachn,
        p0002-vorna to t_output-vorna.
* Gather previous Employee details
loop at p0023.
    move-corresponding p0023 to t_output.
    append t_output.
endloop.
*eject
*& End-of Selection                                                    *
end-of-selection.
perform print_report.
* Downlaod the file
if not t_output[] is initial.
    if p_test eq space.
      perform download_file.
    endif.
else.
    write: 'No records selected' color col_negative.
endif.
*eject
*& Top-of-page                                                         *
Top-of-page.
* Print Header
perform print_header.
*eject
*&      Form download_file
* Description :
FORM download_file .
DATA: full_file_name    TYPE string,
        z_akt_filesize    TYPE i     .
full_file_name = p_file.
* download table into file on presentation server
CALL METHOD cl_gui_frontend_services=>gui_download
    EXPORTING
      filename                = full_file_name
      filetype                = 'DAT'
      NO_AUTH_CHECK           = c_x
      codepage                = '1160'
    IMPORTING
      FILELENGTH              = z_akt_filesize
    CHANGING
      data_tab                = t_output[]
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      not_supported_by_gui    = 22
      error_no_gui            = 23
      OTHERS                  = 24.
IF sy-subrc               NE        0.
    MESSAGE e016 WITH 'Download-Error; RC:' sy-subrc.
ENDIF.
ENDFORM.                    " download_file
*eject
*&      Form print_report
*Description:
FORM print_report .
data: i       type i,
        w_count type i.
sort t_output.
* Print the report
loop at t_output.
    i = sy-tabix mod 2.
    if i eq 0.
      format color col_normal intensified on.
    else.
      format color col_normal intensified off.
    endif.
    write:/1     t_output-pernr          ,
           10     t_output-vorna(25)     ,
           35    t_output-nachn(25)      ,
           61   t_output-orgeh_stext     ,
           102 t_output-plans_stext     ,
           143 t_output-begda           ,
           154   t_output-endda          ,
           168   t_output-land1          ,
           178   t_output-arbgb(40)      ,
           219   t_output-ort01          ,
           249   space              .
endloop.
uline.
Describe table t_output lines w_count.
Skip 2.
Write:/ 'Total No of Records Downloaded: ' color col_total,
          w_count.
ENDFORM.                    " print_report
*eject
*&      Form print_header
*Description:
FORM print_header .
skip 1.
Uline.
format Intensified on color col_heading.
write:/1   'Pers. #'        ,
         10   'Last Name'     ,
         35   'First Name'    ,
         61   'Org Unit'      ,
         102 'Position'      ,
         143 'Beg Date'      ,
        154   'End Date'      ,
        168   'Cntry Key'     ,
        178   'Prev Employer' ,
        219 'City'           ,
        249   space          .
format intensified off color off.
uline.
ENDFORM.                    " print_header
*eject
*&      Form init_selction_screen
*Description:
FORM init_selction_screen .
refresh: pnpwerks,
           pnppersg,
           pnpstat2.
clear:   pnpwerks,
           pnppersg,
           pnpstat2.
pnpwerks-sign   = c_i.
pnpwerks-option = c_EQ.
pnpwerks-low    = c_pl03.
append pnpwerks.
pnppersg-sign   = c_i.
pnppersg-option = c_EQ.
pnppersg-low    = c_1.
append pnppersg.
pnpstat2-sign   = c_i.
pnpstat2-option = c_EQ.
pnpstat2-low    = c_3.
append pnpstat2.
ENDFORM.                    " init_selction_screen

CP5.5 - Is it possible to create a quiz summary screen with all questions reviewed on one screen?

Hello Forum members,
I was wondering if it is possible, rather than having a quiz review where you review the quiz questions one screen at a time, if it is possible to create a quiz summary screen, which will provide a summary of which questions were answered incorrectly/correctly (without actually giving the user the correct answers)?
An example of what I'd like to achieve is below:
Is this possible in CP5.5? Perhaps with Advanced Actions/variables?
many thanks
Loraine

Hello Loraine,
This is possible using Advanced Actions and variables. After every question, On Success you can set a variable to 1 and create a custom screen where you can show/hide the tick mark graphic based on the variable value set.
For Ex:
- For question 1, on success, set x=1
- On the results screen, correct tick mark graphic is hidden. If x=1, then show the correct tick mark.
Like this you can do for all the questions. Will wait for others also to comment for any quicker solution.
Thanks,
Vish

I cannot determine how to utilize the voice function while in the fitness workout area. On rare occasions it works with a voice summary of my workout and a new summary screen. would appreciate help

I cannot determine how to utilize the voice function while in the fitness mode. On one or two occassions it worked but I do not know how it was activated. It gives a voice summary and new summary screen for the workout.

Hi shiva
Thanks for your help,
Can you check this coding and revert me back ASAP Please.
REPORT BDS_GOS_CONNECTION.
DATA : logical_system LIKE BAPIBDS01-log_system.
       CLASSNAME LIKE BAPIBDS01-CLASSNAME
       OBJKEY LIKE SWOTOBJID-objkey.
PARAMETERS: pa_lo_sys BAPIBDS01-log_system,
            pa_class like BPIBDS01-CLASSNAME,
            pa_objkey like swotobjidobjkey.
AT SELECTION-SCREEN.
CALL FUNCTION 'BDS_GOS_CONNECTIONS_GET'
         EXPORTING
              bor_id             = bor_id
         IMPORTING
              logical_sytem      = pa_lo_sys.
              classname          = pa_class.
              objkey            = pa_objkey.
         EXCEPTIONS
              no_objects_found     = 1
              internal_error       = 2
              internal_gos_error   = 3.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.
clear v_attno1.
i_object1-typeid = 'BUS2012'.
i_object1-catid = 'BO'.
i_object1-instid = i_yItem-docno.
call method cl_gos_attachment_query=>count_for_object
   exporting
    is_object = i_object1
    ip_arl    = space
   receiving
    rt_stat   = i_stat1.
read table i_stat1 into wa_stat1 index 1.
if sy-subrc eq c_0.
    move wa_stat1-counter to v_attno1.
endif.
CALL METHOD cl_gos_attachment_query=>count_for_object
EXPORTING
is_object = object
ip_arl =    space
RECEIVING
rt_stat = lt_stat.
READ TABLE lt_stat INDEX 1 into ls_stat.
count = ls_stat-counter.
*The object has to be a concatenation of your document, like this:
CONCATENATE object-instid tab-gjahr INTO object-instid.
ELSE.
CONCATENATE tab-bukrs tab-belnr tab-gjahr INTO
object-instid.
ENDIF.

My mozilla firefox search engine always defaults to amazon...how do I get just basic mozilla firefox search screen with out the default to amazona?

My mozilla firefox search engine always defaults to amazon...how do I get just basic mozilla firefox search screen with out the default to amazon.com for everything ?

Change the search plugin in the search bar to something else and you can search with that.

ITunes 7.0 - Summary screen - what is up with my "other" capacity?

In the newest version of iTunes - when I am on the summary screen - at the bottom of the page - where you see the color-coded explanation of what is taking up the capacity of one's iPod - the largest part of my used space is listed as "other"(in orange) - and is taking 10.25GB - and yet I have no idea what this is - or how to delet/clear it!!! Any help!? Thanks so much!
Compaq Presario Windows XP

A restore returns the iPod to factory settings, restores the iPod software and erases everything stored on it.
See: See this: Restoring the 5th generation iPod (iPod with video).
The storage space taken up by "Other" can be made up of, notes, podcasts or any files of any kind you've added to the iPod whilst using it as a hard disk. it's not photos which are stored under "photos".
There will always be a few MBs of used space under "other" but yours is unusually large.
If the iPod is enabled for disk use, you can look at the folders on the iPod through Explorer and delete anything you don't want.
Otherwise restore it and reload everything from your iTunes library.

How to avoid default selection screen in HR interfaces(using pnp ldbs)

How to avoid default selection screen in HR interfaces(using pnp ldbs)

Dear Rakesh,
The report category is used to change the selection screen of programs that use the 'PNP' logical database.
See links bellow:
http://www.sapdevelopment.co.uk/hr/hr_repcat.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/15/229357553611d3967f00a0c9306433/frameset.htm
Report categories for selection screen in HR programming
Also visit the following blog:
/people/alvaro.tejadagalindo/blog/2006/02/19/how-to-deal-with-hr-payroll-reports
Regards,
Naveen.

Lock Screen Custom Image Stuck on Load for Windows 8.1, (Can't see the default lock screen images)

I recently upgraded to Windows 8.1, but it reset my custom lock screen image. I tried re-applying it but the lock
screen preview in the settings is stuck on a load loop. Does anyone know why that is and why it won't set my custom image as the new lock screen image?
i can't find the C:\ProgramData\Microsoft\Windows\Systemdata, folder,
in my laptop
how to get default lock screen images in 8.1? plz help me..

I recently upgraded to Windows 8.1, but it reset my custom lock screen image. I tried re-applying it but the lock
screen preview in the settings is stuck on a load loop. Does anyone know why that is and why it won't set my custom image as the new lock screen image?
i can't find the C:\ProgramData\Microsoft\Windows\Systemdata, folder,
in my laptop
how to get default lock screen images in 8.1? plz help me..
Here is a much more helpful link then the unhelpful ones below:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/pc-devices-crashes-with-win-81/a498863b-75bb-4dd2-9ca3-206320df0c60

Screen Order in OPA ( Summary Screen to Question Screen)

Hi All
I designed both Summary screen and Question screen in OPM. How to create the screen order so that summary screen will call specific question screen instead on Automatic screen?
Thanks
Dev

Notes on terminology:
OPM is the development environment. It is where you write rules in Word and Excel documents, create screens etc, etc.
OPA is a generic term for the technology as a whole but is usually used to refer to actual deployments of the rules engine itself. You provide the engine with data in some way (dependent on your deployment channel) and it gives you back an answer in some way. There are various extension mechanisms available to allow you to do things like get information in from a web-service.
So in answer to your question (as you phrased it):
There are no mechanisms that ship with the product to have data consumed by OPM which is the place that you create rules for later execution in OPA. You would have to code something specifically to do whatever it is you want to do.
What benefit will the web-service provide to someone creating rules? Why do you want to pass information from a web-service into the rules development environment? I'm not saying that there is no use case, I'm just saying that it's not one I've ever heard people ask for before (except in those cases where they got the terminology confused and were actually asking about how to use web-services with OPA but said OPM).
Assuming that you still think this is something you want to do can you please explain why you would want to do that? (If you can explain your use case then that can help the team who build the product to think about ways that they could make it easier in the future)
If you want to know what mechanisms there are for OPA (the rules engine) consuming data that is a different question from the one you asked and for which Jasmine has given you a lot of links to further information - so I'd suggest you read up on them and then refine your question if they do not provide the answer.
If you can make a clearer statement of what you're trying to achieve then you're more likely to get a useful answer (not me, I don't know much about using web-services other than using ODS - Oracle Determination Server - a deployment of the OPA rules engine with a web-service wrapper).

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

Hi, Derek -
...the screen splits into 4 areas and open windows seperate and shrink.
Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

Can you help me to retrieve my applications. In iTunes I accidentally clicked the Restore button in the Summary screen. It restored the original settings and I lost all my applications and don't know if it is possible to retrieve them.

Can you help me to retrieve my applications. In iTunes I accidentally clicked the Restore button in the Summary screen. It restored the original settings and I lost all my applications and don't know if it is possible to retrieve them.

All apps on an iPhone, iPad, or iPod Touch should be in your iTunes library on your computer.
You can re-download all 3rd party apps and you won't be charged again for a purchased app as long as you use the same iTunes account to re-download the apps that was used to purchase the app originally.
http://support.apple.com/kb/HT2519
Do this with iTunes on your computer. After you have re-downloaded every app one by one, select Sync Apps under the Apps tab for the device's sync preferences along with selecting the apps below that you want transferred to the device followed by a sync to re-install the apps on the device.

How do I change the default iPhone screen capture format to .jpg? I have an iPhone 5.

How do I change the default iPhone screen capture format to .jpg?
I have an iPhone 5 (but I'm sure users with other models would like to do this as well).
My online searches have not found an answer -- I did find a discussion thread that was essentially, "Why would you want to do that?" Those posts are not welcome! Not looking for a work-around, an intermediate step, or the need to change the file format on a computer, etc. Just want to hit the two buttons and have the resulting capture be a JPEG file.
Not interested in jailbreaking or using apps that require jailbreak -- Want to do this with a new phone.
Thank you in advance for any help!!
--tim

You can't.

How to change the text in default selection screen

Hi,
I have created the default selection screen(using PNP Logical database) ,In that I wants to display 'Data Selection Period' instead of 'Period'.
Please send me the related code.
Thanks in advace
mohan

HR Logical Database is PNP
Main Functions of the logical database PNP:
Standard Selection screen
Data Retrieval
Authorization check
To use logical database PNP in your program, specify in your program attributes.
Standard Selection Screen
Date selection
Date selection delimits the time period for which data is evaluated. GET PERNR retrieves all records of the relevant infotypes from the database. When you enter a date selection period, the PROVIDE loop retrieves the infotype records whose validity period overlaps with at least one day of this period.
Person selection
Person selection is the 'true' selection of choosing a group of employees for whom the report is to run.
Sorting Data·
The standard sort sequence lists personnel numbers in ascending order.
· SORT function allows you to sort the report data otherwise. All the sorting fields are from infotype 0001.
Report Class
· You can suppress input fields which are not used on the selection screen by assigning a report class to your program.
· If SAP standard delivered report classes do not satisfy your requirements, you can create your own report class through the IMG.
regards
vinod

Link goal with screenflow on default summary screen

Similar Messages

Maybe you are looking for