"Link relative to" can't be changed.

I can't change only "Link relative to" setting in Site Setup window. Any changes in other settings are applied, but this setting is restored after saving it.
I asked adobe support, and tried all FAQs, reinstall by installer.
Nothing has been changed.
This happened few weeks ago.
Before that, I could normally set this (I usually set this as "Site Root"). Now I have to change file pathes manually.
I almost gave up this problem, but I hope anyone have clue for this.
I even tried editing the file "~/Library/Application Support/Adobe/Dreamweaver CC/cloudpref/AdobeDreamweaverSettingsSiteDefs.xml".
I changed "relativeTo" in localinfo directive, but DW ignores this or overwrites the file after launch.
I guess this has been caused since Cloud Sync was implemented.

Thank you for your advice.
I provide correct http adress the field under "Link relative to".
I have been using this feature / setting for a long time and had nothing wrong in my lots of site settings before.
In other site settings which were set as "Document", those also can't be set to "Site root"...
Only this setting is disabled now.

Similar Messages

Can you give me a paper or document related to this phone was changed since it was broken down? I need IMEI numbers of two Iphones on the same page. Because I don't wanna save this Iphone again in my country. I paid one time for my old Iphone.

My Iphone was changed because of broken down thanks to its warranty. I am from Turkey and I paid one time for my old Iphone to save. Can you give me a paper or document related to this phone was changed since it was broken down? I need IMEI numbers of two Iphones on the same page. Because I don't wanna save this Iphone again in my country. I paid one time for my old Iphone. If you give me a document, I don't need to save my Iphone5 and also I don't need to pay again to save in my country.

this forum is made up of users like you, not apple employees. We can not help you with that kind of request.

I forgot the answer to the security questions and i forgot the email i put there to resend the link so i can change it. i want to close my apple ID and open a new one with the same email could i?

i forgot the answer to the security questions and i forgot the email i put there to resend the link so i can change it. i want to close my apple ID and open a new one with the same email could i?

i live in saudi arabia and i tried calling them and letting them call me but they said that it is unable to my country. ***** i don't know what to do!

External link in TOC item cannot be changed, it keeps returning to previous link

I am using RoboHelp 9 WebHelp Pro publishing to RoboHelp Server 9. I just imported an existing project (and went through the upgrade process) and am now trying to make some changes to my project prior to publishing. One of these changes is to change the hyperlink / file path to a TOC item. For some reason I can make the change, however when I try to accept it and publish, the path returns to the original path. I am unable to change this path to a new one. Does anyone know of a solution?
Does anyone know if this may be related to my other issue with this project where turning the Search option for Context off is not being applied ? (see: http://forums.adobe.com/message/4743109)

Are you saying that your change is accepted in the RH interface but that after you publish to the RHS that the link still points to the old path? If so check your unpublished files (click View from your WebHelp Pro SSL) and see if that works. If it does try restarting your Tomcat service (if you are using Tomcat) and deleting your browser cache. Another way to prove where the issue is would be to create a new RHS Area and publish to that. If it works there.
Personally I wouldn't say this is related to your other issue.

Moving a site with links relative to site root

hi:
we have a dedicated server (Linux, Apache) with several
virtual hosts:
/vhost/site01/home/html/
/vhost/site02/home/html/
now, i need to add some sites (developed by other people and
working in
their own servers) as "microsites" inside site01. so i
created a folder
named microsites and a subfolder for each one:
/vhost/site01/home/html/microsites/xxx/
/vhost/site01/home/html/microsites/yyy/
and a FTP account for each developer
the problem is that one of them (HTML, Flash & a lot of
Perl scripts)
was developed using links relative to site root so, they
don't work anymore
besides changing every link to the new path, any other way to
solve the
problem? perphaps on server sidewith a directive on a
.htaccess file or
in httpd.conf?
tia,
jdoe

John Doe wrote:
> the problem is that one of them (HTML, Flash & a lot
of Perl scripts)
> was developed using links relative to site root so, they
don't work anymore
>
> besides changing every link to the new path, any other
way to solve the
> problem? perphaps on server sidewith a directive on a
.htaccess file or
> in httpd.conf?
Haven't used it since the DWMX time frame and that was only
for some quick testing, but an extension named Relativity can be
run site wide to change from one type to another:
http://e7x.com/dw/
Danilo Celic
|
http://blog.extensioneering.com/
| Adobe Community Expert

How can I manually change the height of the "Type ...

Hi all
Just got automatically installed the latest 6.22 version of skype few minutes ago and I got a few questions.
First and foremost, how can I MANUALLY change the height of the textbox, where I type the messages. I would like to make it larger, like in the previous versions of skype. I don't want to move my mouse cursor through the entire monitor to reach this tiny textbox.
And second, why you guys are trying constanly to ruin something that is working perfectly ? Going to revert to the previous version until you fix all these nuisances.
Regards

There is no way to do this, it is designed to be strictly landscape with keyboard, portrait without - not the best thought-out phone on the market, mainly geared towards compulsive texters and e-mailers.
There's no way to know whetherNokia will change this with any future updates, perhaps you should make the recommendation to them directly using the 'contact us' link.

Base unit of measure can not be changed since EAN is already assigned.

Hi,
We would like to change the UOM from EA to SET .In order to tag MM # as BOM Header and ZCEN (Serial number profile)but the error massage appears as below print screensystem is not allowing to do so ,throwing following error message:
"Base unit of measure can not be changed since EAN is already assigned."
Could you help to resolve the same.
Thanks,
Amit

Hi,
Thats correct you must be getting Error message M3 341 ,
EAN international article number is tied with material number in basic data view with EAN Category and seperate number range
EAN is a standardized unit that uniquely identifies a material relating to a unit of measure or type of packaging.
The International Article Number (EAN) is assigned by the manufacturer of the material. In this case, the EAN identifies the
manufacturer uniquely. A company can assign EANs using "in-store" numbering techniques known only to the company.
If you still want to change UOM you need to first remove the EAN assigned..please explore further if you have internal number range
for EAN or external ..etc
Thanks
Diwakar

Why can't I change my apple id / email address associated with my apple id ?

My apple id is associated with a gmail address.
I wan't to change it to something else.
So I went to: appleid.apple.com ---> Change apple id ---> Typed in new email address (everything shows green) ---> Hit Save.-->Edit box disappears as if everything went ok ----> But the box showing my apple id, still shows the gmail address!
It still shows my gmail address!! Doesn't send any verification email or anything! No matter what I do, it doesn't let me change it from my gmail address!
It let me change my password though, and also let me change my rescue email address.
Why can't I change my apple id ?

Hi KeanuReeves,
It sounds like you have already done most of the steps in this article relating to changing the email associated with your Apple ID, but you may want to go through them again -
Manage your Apple ID primary, rescue, alternate, and notification email addresses
http://support.apple.com/kb/HT5620
If you are still having difficulty changing the email address, you may want to contact Apple’s account security team using the contact information in this article -
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thanks for using Apple Support Communities.
Best,
Brett L

How can I easily change my apple security questions

About July of last year, I decided to purchase a $15.00 iTunes card. Since then, I've yet to be able to use it because I've yet to be able to find a way to change my security questions. I would be fine and happy if it weren't for the fact that, no natter what I do when I try to figure out how to change the questions, I get redirected to other pages that have no useful information or links that I can click to actually change my security questions. Mind you, I've been battling with this for nearly a year, and I've been tempted many times to just create a new iTunes account, but I feel that losing my money would be absolutely useless. I also feel that Apple Co. should be obligated to easily help their costumers in matters that aren't that uncommon, but that's a different story for a different time. Anyways, I've basically tried everything.
So, in turn, does anyone have any way in the world that I can easily change my security questions without having to be redirected to so many different pages that my browser can't support/show them all? All kinds of help are greatly appreciated.

I see what you mean. I don't think it's so much as the fact that it's "redirecting" me to all of these different pages, but more so the fact that it tells me to click these links, which normally turns out to be a link that I've more than likely clicked prior, and it takes me to a page that Ive already been on. The cycle restarts itself and I eventually get frustrated.

Why can't I change my Nickname or Reviews/Ratings in iTunes Account Info Settings?

Hello,
I was messing around some more in iTunes, and went to the iTunes store to change some of my Account Information. I successfully changed my email and payment info under the heading "Apple ID Summary" ...but I had some issues editing my information in the "Settings" section.
I will explain what happened, or did not happen, briefly. My question, for lack of more specific words, is, why will iTunes Store not follow through with these commands?
All follows in the iTunes Store > Account Information > Settings:
1) I clicked on the link "Edit Nickname" so I could change it to something more "mature" (as I made this name when I was about 17 years old). This link took me to a different screen within iTunes Store, where I typed in my desired new Nickname in the appropriate space. However, when I clicked "Submit," the screen simply did nothing. No error message, no successful change, nothing at all...it just stayed the same.
2) I tried also to edit the "Reviews and Ratings" history by clicking on the "Manage" link. This link also led me to a different screen, showing two ratings I had made for games/applications on my iPod touch. I tried to click the "Remove" link next to each review. Again, nothing happened...no message at all, the screen simply stayed the same.
Again, I appreciate any help. Thanks!
--Bobby

Apparantly not, and here is the extremely unhelpful reply from Apple support I recieved;
From Support,
I understand that you want to change your nickname of your iTunes Store account. I am sure you are anxious at this time and I will do whatever I can to help you right away.
Jeff, you can change your iTunes Store billing information at any time. When you update your credit card number or billing address through the iTunes Store, any equivalent information you might use with MobileMe, iPhoto, Aperture, or the Apple Store online is also updated.
To update your billing address or credit card number, follow these steps:
1) Make sure you're using the latest version of iTunes. It can be downloaded free of charge from the Apple website:
http://www.apple.com/itunes/download
Note: Installing the latest version of iTunes will not affect your library or any items in your account that you haven't downloaded.
2) Click this link:
iTunes will automatically launch and the sign-in dialog will appear.
3) If you are not already signed in, you will need to enter your iTunes Store account name and password and then click the Account Info button.
4) On your Apple Account Information page, click Edit Payment Information
Make the necessary changes. Your billing address should be exactly the same as the address on your credit card statement and with the United States Postal Service (click "Find a ZIP Code" at http://www.usps.com and follow the onscreen instructions). This is important, because even differences in punctuation, abbreviation, and capitalization can cause payment errors that might prevent you from using the iTunes Store.
5) When all of the information is up to date, click Done.
When you update your billing information, the iTunes Store places an authorization hold on your credit card to verify your account information. You might see this authorization request on your online statement. This is not an actual charge; it is simply a test to confirm that your credit card account is active and has credit available to accommodate transactions.
Authorization requests are automatically removed from your account by your financial institution. The amount of time it takes to remove authorization requests varies by financial institution. If you have any questions about the way your financial institution handles authorization requests, please contact their customer-service department.
I hope that you will find this information helpful. I will be glad if you let me know that my email reached you in a right spirit.
Our customers deserve the best and our aim is to ensure that each and every customer of Apple must be happy and satisfied. If you have any questions or concerns in future, please let us know so that we can help you better.
Thank you for being a part of iTunes family. We are glad to have you as our customer.
Have a great day!
Sincerely,
Now, tell me how that helps at all. They almost directly change the subject,....Jeff, we understand you need to change your nickname....next sentence is telling me how to change my billing.
Also, i went through the process of changing billing and other info, which of course, didnt do ANYTHING to help change the nickname.

Why can't you change the .html/.htm filetype icons for Firefox?

**Before you read this question: NOTICE I am talking about Firefox Icons on Windows, NOT ON FIREFOX BOOKMARKS/PROGRAM!!!!! Read the question then please, please visit the link so you have a better understanding of what I'm asking with this question!!!!**
I've been trying to change the FileType Icons for the Firefox Documents for weeks now and there's no solution that I can see. I tried using Filetypes Manager to change the .html/.htm filetypes icons with no luck. Why does Firefox force this change on users when most users that use Firefox do so because of it's ability to be customizable? Even Microsoft Word .doc file icons allow you to change them! Microsoft!!! Why is Firefox forcing everyone to use their ugly filetype icons? &____& I've yet to see this issue not only addressed but solved. Why does Firefox ignore this issue? I'd like my computer's icons to all be top-notch, and Firefox is preventing me from making my weeks of hard work go to naught. Please, please address this issue... if anything, tell your users why your program is forcing the icons on them in the first place when monopolies like Microsoft allow their users to customize program filetype icons.
If this cannot have a fix, why can't it be a new feature/addition to the newest versions of Firefox?
Edit: And because people are starting to get 'confused' I've included a screen shot of what I'm talking about because, for the love of god, people, I'm *not* talking about using favicons and bookmarks!
http://i28.photobucket.com/albums/c231/arcanetheorem/example.png

The only thing I changed about the question was to add an image and to try and make it more understandable since everyone assumed I was talking about Favicons/Bookmark Icons....
As for it being a Windows 7 issue and not a Firefox one... if it were just a Windows 7 issue I wouldn't be able to change other application icons or filetype icons on the Windows platform using FileTypes Manager. Firefox, from what I've been able to gather, is not one that can be changed. If I change the filetype icons for Word Documents any other extension (like .mp3/.mp4/.avi/.mkv), I get the changed icon I wanted. However, when you try to change the Firefox .html/.htm filetype extension icons, it doesn't work. Have you tried going through changing your icon filetypes using FileTypes Manager to see this issue? If it were a Windows or FileType Manager issue, then I'd have trouble changing other icons on that platform, no? So what I'm asking with my question is why this is. Why, if you use FileTypes Manager to change Windows7 icons, is Firefox's icons the only ones that won't be changed? Doesn't this fall under Firefox's problem if their icons are under the 'can't be changed' category under Windows? And using shortcut icons is no good for me. When I browse a folder of .html files, I want to see the icons I changed it to, not make a shortcut to every .html file I have just to have a better-looking Visual Style. Defeats the purpose, doesn't it? As for clicking on Properties to change it... Windows 7 doesn't allow this feature anymore, which is why I've been using FileType Manager to change all filetype extension icons.
Hope that helps clear things up a bit, though I have a feeling I'm just confusing everyone more with what is a simple question/problem....

Can't save changes to forms in access 2010 db format 2007

Access 2010 - file format Access 2007 cannot save design changes
On a previously designed form which works, I went back to change a check box from enabled "Yes" to "No" - I am then prompted to save changes and I click "Yes" but the form will not save or close. To close the form I must select "No" to the changes and they
are lost. If I return to form view the changes are also lost when I close.
I have exclusive access to the DB and per some other suggestions I have checked the box to open in exclusive and uncheck the box "Track name AutoCorrrect Info". I have also used compact and repair, which is also done on a regular basis.
I have found that it is beginning to occur on other forms as well for no apparent reason.
History:
This was originally an Access 97 database that had been upgrade, all forms, reports, etc., had been imported into a new Access 2007 database. It has been running fine for the past month and we have been making design changes with no issues up to this point.
The database is running on MS Server 2008r2 Terminal Services

Hi Iasun:
I have exactly the same problem that you had and have not been able to solve it. As you say, forms can be modified but no be saved; you can´t either change it´s name or delete it. Many forms in a large application that I developed have
the same problem and it seems that with time more forms are becoming "damaged"
What I have done is to open the "damaged" form in design view and copied all controls to a new Form, leaving the old form unused. This is not a real solution but it´s the only way that I have found to change the original form.
Your comment is more than a year old, have you already found a good solution?
My application was originally developed in Access2007 and still running under it so it is not a problem related to 2010.

Links relative to HTTP address ?

I'm using DW8 and I'm trying to find a way that DW8 can
create links relative to an http address.
For example, if I move an image in the local site to the html
page the html code will show something like the following:
<img src="/images/image1.gif"
What I need is that when I move the image it creates a line
like the following:
<img src="
http://mywebsite.com/images/image1.gif"
I checked everywhere and I cannot find how to do this on DW8.
Inside the site settings I have the http address specify but that
dopesnt work. That only works for site relative links.
Any inputs?

No way, Jose. Sorry....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"rcrane" <[email protected]> wrote in
message
news:f9am5s$dhd$[email protected]..
> I'm using DW8 and I'm trying to find a way that DW8 can
create links
> relative
> to an http address.
>
> For example, if I move an image in the local site to the
html page the
> html
> code will show something like the following:
>
> <img src="/images/image1.gif"
>
> What I need is that when I move the image it creates a
line like the
> following:
>
> <img src="
http://mywebsite.com/images/image1.gif"
>
> I checked everywhere and I cannot find how to do this on
DW8. Inside the
> site
> settings I have the http address specify but that
dopesnt work. That only
> works
> for site relative links.
>
> Any inputs?
>
>
>
>

Can this be changed in Mail messages? Light gray color.

When viewing and printing email from my Inbox, the "To" line and the date (upper right on email) appear in a pale gray color.
Am printing email on a Canon PIXMA MX310, and printing in full standard color becaue I need too keep the messages intact as far as font colors, highlights, etc.
Problem is when these pages are faxed and photocopied, the two pale gray areas often come out very light, too faded.
Can it be changed? .
Thanx.
P.S. An example is this cut and paste from this Apple Support Communities page where it shows the "sign out" link. See how pale the "Welcome" is. It is even lighter than that in my email.
Welcome, ParrotPal

I found that they do list in the order you put them on the phone, but when I had to do a reset/restore it placed them into a nearly alphabetical order.
I have found no way to manually change the order nor did my local Genius Bar.

Lower limit can only be changed during initial entry, Message no. NR651

Hi Experts,
As per the number ranges limit values defined in the system for the planned orders, there is a need to increase the number ranges.
System is not allowing us to change the limit values of the Planned orders in MD91 and showing the Message no. NR651.
We have also searched for the available threads in SCN and other sites, but didn't find the root cuase link for this error.
System message:
Lower limit can only be changed during initial entry
Message no. NR651
Diagnosis
You have tried to change the lower limit of an interval which has a non-initial number status.
System Response
The change was not executed.
Please guide us how can we increase the number ranges for planned orders.
Thanks in advance.

Hi,
You can create a new number range or change in transaction OMi2 or in MD91.
Assign the 02 by clicking number range in OMi2
or in transaction OPPQ click on number range & select the 02.
Do the changes as described and analyse the results. Ensure that while testing no body is creating the planned orders.
Regards,
Narresh

"Link relative to" can't be changed.

Similar Messages

Maybe you are looking for