Links relative to HTTP address ?

I'm using DW8 and I'm trying to find a way that DW8 can
create links relative to an http address.
For example, if I move an image in the local site to the html
page the html code will show something like the following:
<img src="/images/image1.gif"
What I need is that when I move the image it creates a line
like the following:
<img src="
http://mywebsite.com/images/image1.gif"
I checked everywhere and I cannot find how to do this on DW8.
Inside the site settings I have the http address specify but that
dopesnt work. That only works for site relative links.
Any inputs?

No way, Jose. Sorry....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"rcrane" <[email protected]> wrote in
message
news:f9am5s$dhd$[email protected]..
> I'm using DW8 and I'm trying to find a way that DW8 can
create links
> relative
> to an http address.
>
> For example, if I move an image in the local site to the
html page the
> html
> code will show something like the following:
>
> <img src="/images/image1.gif"
>
> What I need is that when I move the image it creates a
line like the
> following:
>
> <img src="
http://mywebsite.com/images/image1.gif"
>
> I checked everywhere and I cannot find how to do this on
DW8. Inside the
> site
> settings I have the http address specify but that
dopesnt work. That only
> works
> for site relative links.
>
> Any inputs?
>
>
>
>

Similar Messages

Check in files stored on http-addresses

Hi All,
I am working with Document Info Records (DIR).
We first wanted to create orignals which just contained a link to a http-address a with jpg file. Since it was a link to a file that might got updated we didn't check in the original.
But now we might need to check in the files and therfore I have some questions.
Is there any problems in checking files from http-addresses?
Is there anything I need to think about when choosing/defining storage catergory?
Can I use default storage DMS, DMS_C1_ST?
What is the capacity of this storage? What maintenance is needed?
Is there anything else that need to be considered when storing a large number of files?
Please let me know if you have any useful information about this matter
Kind regards
Mikael

1. Is there any problems in checking files from http-addresses?
It won't work standard, you may have to use an enhancement to download the file to a temp directory before it checks in
2.Is there anything I need to think about when choosing/defining storage catergory? Can I use default storage DMS, DMS_C1_ST?
No, not recommended if volumes are high. Create a new storage category and use an external content server if your volumes will be high.
3. What is the capacity of this storage? What maintenance is needed?
Internal database is not recommended for production environments, but you could probably put up to 60000 docs in there if they were small docs. I.e. not Drawings. If you use an external content server, the capacity is up to 1000000/server if I remember correctly.
4 Is there anything else that need to be considered when storing a large number of files?
Caching if you intend using them at a number of locations and the individual files sizes are large.
Can you give more detail on exactly what the application is? I.e. what types of documents do you intend storing?

Need http address to stay the same

I have bought our company web address with web forwarding set
up to go to our free ntl web space.
This works fine when you type in the company address. The
problem is if you click on a link on the index page it takes you to
the requested page but the http address changes to show my
unsightly ntl address. I would like to have the company address
showing at all times - so it doesn't update.
I thought the problem might be that I had absolute references
- but as far as I can make out they are all document relative.
I only have one folder - so no sub folders to get confused
with.
The ntl is a directory - so I have framed web forwarding set.
I dont have a host directory specified - could this be a
problem??
Not sure what to look at next?
Appreciate any help...
(working in DWMX 04)

> I have bought our company web address with web
forwarding set up to go to our
> free ntl web space.
The only fix is to get real commercial web hosting, and point
the domain
name's DNS to that hosting.
Domain name forwarding or worse, single frame redirection to
a free host
won't do what you want.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

How to Create a Dynamic http address that opens the Explorer Window for a List Item When a Button Is Clicked--Currently Trying to Make this Work with Javascript

I have created a button (via Content Editor) that uses JavaScript to open the Attachments folder of a list item in the Explorer Window in SharePoint 2010. The purpose is to have drag and drop functionality for each list item, having multiple attachments.
The button works but opens the "Attachments" folder containing all of the other folders for each list item (one folder per item). It seems that when you add an attachment to a list item, SharePoint numbers the folder based on the item's ID. What
I'm trying to do is take the JavaScript I have and have it run when a button is clicked in a custom form. When it runs, I'm trying to get it to open the "specific" folder for the list item. I have had success creating a hyperlink in the list that
does this; however, the link WILL NOT work until I use the Content Editor created button that runs JavaScript, that prompts me to click OK to my profile certificate, and then opens the Attachment folder. After that occurs, I can use my hyperlinks without issue
because I'm no longer prompted to click OK for my cert.
So I'm trying to take the JavaScript I have and place it in a list item form (custom form) and have it run when a form button is clicked. The problem is I have very little knowledge of JavaScript (did I mention little?) and
"don't know how to take the "http:" address I have in the script and append to it the list item ID, according to the record I have open."
So that for any record I open, the script will grab the corresponding record ID (or list item ID) and append it.
Here's the script I'm working with (which I didn't create but am grateful for):
<style>
.httpFolder {behavior:url(#default#httpFolder);}
</style>
<script text = "javascript">
function fnOpenFolderView(){
oDAV.navigateFrame("https://server/collection/site/subsite/Lists/Sublist/Attachments","_self");
</script>
<div id = "oDAV" class = "httpFolder"/>
<input type = "button" value = "Open Attachment Folder" onclick = "fnOpenFolderView()"/>
The above script, in the Content Editor, creates a button that opens the Attachments folder for the corresponding SharePoint list.
JackSki123

Hello Thriggle,
Thank you for pointing that out. I appended your "GetUrlKeyValue" to the end and it worked. That said, I noticed it doesn't run as smoothly as when I simply click on the Content Editor button I created that resides on the SharePoint List
ASPX page (not the form). The Content Editor button has the same code, minus the "GetUrlKeyValue". I click it; I get prompted to choose my cert; it opens right up.
Now go to the ASPX Display form where I dump the code in a table cell. Button appears in cell; I click it; wait; wait; I get prompted for cert; it opens. Do I need some sort of "throttle" for the JavaScript? For instance, I thought before running
JavaScript, you reference the library first. This code doesn't do that. I'm wondering if there's something more I need to make this run smoothly. Thank you both for getting me this far.
JackSki123

Incoming mails don´t show text and/or http addresses but it does when replying the same mail

Some incoming e-mails in GMail do not show the attached part that comes within the body of the mail, (text or http addresses) but when I try to alert the sender with a reply, it does show in the reply. It's embarrassing when it happens, and is too late to stop the reply.
Apparently it only happens when I use Mozilla (which is 99% of the time) but it doesn't with Chrome.
Thanks.

In your question, you indicated that you are running Firefox 8. Is that correct? It might be difficult to diagnose issues with that version because most people have moved on to Firefox 12 (plus or minus 1 version). Can you upgrade?
It's hard to think of a reason that ordinary text or links in ordinary text would not display. For embedded images or videos, one possibility is a difference in the protocol, i.e., HTTP (not secure) versus HTTPS (secure).
Hopefully someone else will have a better guess (or actual knowledge!).
Regarding the blue lines in a message, that usually indicates the earlier message was forwarded a few times. I don't know whether Gmail will let you reformat that area or whether you have to clean it in another application (e.g., for plain text, in Notepad) and paste it back in.

Before, when I typed an http address in my hotmail account, it would be highlighted; since I got firefox, it is NOT highlighted. How can I get firefox to highlight an http address when I type it?

The above say it all:
Before, when I typed an http address in my hotmail account, it would be highlighted; since I got firefox, it is NOT highlighted. How can I get firefox to highlight an http address when I type it?

Do you mean to create a clickable hyperlink while composing a new mail?
Just above the textarea that you use to enter the message text there is usually a button bar with buttons to add text formatting like Bold and Italic.<br />
That toolbar may also have a button to turn a text link into a clickable hyperlink (look for a chain like button).<br />
You can select the text and click that button to turn the link into a clickable hyperlink.<br />
If you can't find the button then hover them all to check the tooltip of each.
* Make Link - https://addons.mozilla.org/firefox/addon/make-link/

Moving a site with links relative to site root

hi:
we have a dedicated server (Linux, Apache) with several
virtual hosts:
/vhost/site01/home/html/
/vhost/site02/home/html/
now, i need to add some sites (developed by other people and
working in
their own servers) as "microsites" inside site01. so i
created a folder
named microsites and a subfolder for each one:
/vhost/site01/home/html/microsites/xxx/
/vhost/site01/home/html/microsites/yyy/
and a FTP account for each developer
the problem is that one of them (HTML, Flash & a lot of
Perl scripts)
was developed using links relative to site root so, they
don't work anymore
besides changing every link to the new path, any other way to
solve the
problem? perphaps on server sidewith a directive on a
.htaccess file or
in httpd.conf?
tia,
jdoe

John Doe wrote:
> the problem is that one of them (HTML, Flash & a lot
of Perl scripts)
> was developed using links relative to site root so, they
don't work anymore
>
> besides changing every link to the new path, any other
way to solve the
> problem? perphaps on server sidewith a directive on a
.htaccess file or
> in httpd.conf?
Haven't used it since the DWMX time frame and that was only
for some quick testing, but an extension named Relativity can be
run site wide to change from one type to another:
http://e7x.com/dw/
Danilo Celic
|
http://blog.extensioneering.com/
| Adobe Community Expert

Unable to download Centro (Bell) bonus software - Palm links not found http 404

Just got a Centro phone replacement and it seems the bonus software links are not working
Link provided by installation CD results in Page not found
http://ws.palm.com/mypalm/bonus/Econtroller.jsp?srcPage=softwareBonus.jsp&pagePath=&action=showbonus...
Palm support link available thru http://kb.palm.com/wps/portal/kb/na/centro/centro/bell/downloads/page_en.html http://ws.palm.com/mypalm/MyPalmGenericUser/ControllerGeneric.jsp?&action=showbonus&productName=1061... also results in Page not found
Please advice where I can download the bonus software
Thanks
Post relates to: Centro (Bell)

The Verizon Centro bonus software link isn't working either, and I'm sure that one worked last month. Perhaps there is something wrong with Palm's server at the moment?
== Edit ==
By the way, I get this on the page when I try the links:
SRVE0255E: A WebGroup/Virtual Host to handle /mypalm/MyPalmGenericUser/ControllerGeneric.jsp has not been defined.
SRVE0255E: A WebGroup/Virtual Host to handle ws.palm.com:80 has not been defined.
IBM WebSphere Application Server
Message Edited by Jeffro on 10-29-2009 04:24 PM

"Link relative to" can't be changed.

I can't change only "Link relative to" setting in Site Setup window. Any changes in other settings are applied, but this setting is restored after saving it.
I asked adobe support, and tried all FAQs, reinstall by installer.
Nothing has been changed.
This happened few weeks ago.
Before that, I could normally set this (I usually set this as "Site Root"). Now I have to change file pathes manually.
I almost gave up this problem, but I hope anyone have clue for this.
I even tried editing the file "~/Library/Application Support/Adobe/Dreamweaver CC/cloudpref/AdobeDreamweaverSettingsSiteDefs.xml".
I changed "relativeTo" in localinfo directive, but DW ignores this or overwrites the file after launch.
I guess this has been caused since Cloud Sync was implemented.

Thank you for your advice.
I provide correct http adress the field under "Link relative to".
I have been using this feature / setting for a long time and had nothing wrong in my lots of site settings before.
In other site settings which were set as "Document", those also can't be set to "Site root"...
Only this setting is disabled now.

Crazy HTTP Address for Local Info? - DW7

Hi;
We ran into a problem with a large intranet. Some links in
pages had to be absolute urls, i.e.
http://1.1.1.1/foo/somepage.htm
due to peculiarities in our network. A result of this is when we
move a file or change links sitewide, DW7 would not update the
links in those pages using absolute urls because it considers them
"external" links.
A coworker tried adding both as the HTTP Address on the
site's Local Info tab separated with a semicolon, i.e.
http://here.there.com/;http://1.1.1.1/.
Once DW recreated the site cache, it appears this has solved
the problem and DW7 now updates those pages' links as well. I can't
find anything in the DW documentation that allows a "double
address" like this, yet it seems to work.
Are we being fooled or does this really work?
Thanks,
Dave

Never mind, we found after further testing that this DOESN'T
work.
Dave

HT4479 I just created an Apple ID but I can't see the verification link in my email address. Why?

I want to know why I don't see my verification link in my email address.

Hello Mihaela1992,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
you can edit your Apple ID and primary email address
Best of luck,
Mario

Unknown accounts linked to my email address

Hi
I have a few unknown accounts linked to my email address. How do I delete those accounts? How were those accounts created when no one else had access to my email?
Thanks,
Asad

I think you may need to contact customer service to report those accounts, and to request to unlink them from your email address;
Just click the link below to see the instructions on how you can get in touch with the Support team ;
http://community.skype.com/t5/The-Skype-Lounge/How-to-Contact-Skype-Customer-Service/td-p/2056783
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

Fresher.. Need Docs/Links related to Webdynpro Java

Dear Experts,
I am a fresher and a self learner. I need documents or links related to Webdynpro Java. Kindly fwd to [email protected]
Thanks in advance.
Regards,
Priya

Hi Priya,
Please find the Following links for complete Webdynpro Java Documents ,
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d">webdynpro Sample Applications and Tutorials</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/weblogs?blog=/weblogs/topic/43">webdynpro Blogs</a>
Regards,
Ramganesan K.

Showing http address before clicking?

What do I have to do in safari to create the frame/bar a the bottom of my window that shows the http address when i hover over the link and before I click it? I can't remember.

Safari menu: View - click on Show Status Bar.

My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?

My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?

Just an email address
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

Links relative to HTTP address ?

Similar Messages

Maybe you are looking for