Linking two RichText objects
Hello,
Today I wanted to convert a design part to flex code and the following problem came up.
I'm trying to wrap text around an image. For example the image is in the left side and I want the text to be in the right side of the image but I need the text container's width to be bigger below the image in order to use this space too.
So I found myself ready to create a component in Flash Pro which enables me to link together two TLF fields and they can share the same text.
Before doing that though I spent some time with the RichText controls in Flex and didnt find an obvious way to do it.
Is there something I'm missing?
There's an example here https://github.com/queencodemonkey/QCMTLF/tree/master/Examples/Pagination/src . You'll probably need to dig through to find the specific piece that does the linking part, but it's a start.
Similar Messages
-
Linking two ODS objects using a multiprovider
Hello Gurus,
I need to link two ODS objects and both are having 3 common characteristics and the relationship between the two objects are one to many.
My questions would be....
1)When the relationship is one to many can I set it up in the multiprovider to sum it up and show in the report?
2)I have 5 other charaterstics that I need to report(Slice and dice) on, but these are not common ones to both ODS objects. Is it possible for the user to get the report based on these charaterstics also? Or do I need to make sure that these 5 also exist in both DOS objects?
Thank you,
DMHi Sh,
Thank you very much for your reply. But I have few concerns.
1)One to many relationship will not have any effect on the data linking since the multiprovider clubs the key figures on common characteristics. I tried this on the system and it worked.
2)The problem would be not having similar characteristics on both infoproviders. So if I want to report on the chars individually it will have a problem( Will come as non assigned values)
But the documentation says the multiprovider supports Homogenous and Heterogeneous cases. Please refer the following link.
http://help.sap.com/saphelp_nw04/helpdata/en/52/1ddc37a3f57a07e10000009b38f889/frameset.htm
I am not sure what I can do now....whether to get all the characteristics in both infoproviders by enhancing the them. Or is there another way?
And lastly the scenario I am looking at is billing and cost of goods. So I might find records in cost of goods which may not have corresponding records in billing.(There can be goods in stock which need to be billed)The problem would be the way multiprovider link records(union) so it will have all the records from both sides even if they do not correspond to each other.
Let me know what you think.
Cheers,
DM -
Can we link two business objects in workflow?
Dear All,
Can we link two business objects in workflow?My problem is that I have to take a standard BO for triggering my z workflow .But later in one step I am using BO which is Z as I am calling a standard Sap transaction in one of the method inside Zobject.
Please let me know how to go for it .
Kind Regards,
Anshu KumarHi Anshu,
You can use the standard BO as the BO for your workflow and trigeger the workflow from its event. To pass values from the standard BO to the custom BO used in the activity step, you need to do proper binding between the std and custom BO in the activity step.
Do proper binding between event -> workflow -> task container.
For assistance on binding in workflows refer to the followng links:
http://****************/Tutorials/Workflow/Workflow.htm
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/workflow%252bscenario
/people/sapna.modi/blog/2007/02/19/workflows-for-dummies--introductionpart-i
Hope this helps!
Regards,
Saumya -
Create view link between two view objects (from programmatic data source)
Hi Experts,
Can we create a link between two view objects (they are created from programmatic datasource ; not from either entity or sql query). If yes how to create the link; ( i mean the like attributes?)
I would also like to drag and drop that in my page so that i can see as top master form and the below child table. Assume in my program i will be only have one master object and many child objects.
Any hits or idea pls.
-tEasiest way to do this is to add additional transient attributes to your master view object, and then include those additional transient attributes in the list of source attributes for your view link. This way, you can get BC4J to automatically refer to their values with no additional code on your part.
-
Logically linking two objects in Illustrator.
Are there any means to logically link two objects in Illustrator like the connector line in CorelDraw? Definitely needed for technical illustrations.
Torsten,
The long answer is no.
Obviously, you may create ordinary lines and work with them in different ways, including ways to ease the pain. -
How to link two authorizations to an object.
Hello,
In the EWA report I received the following recommendation:
"If you do not want to disable development in your system, you have to exclude OBJTYPE=DEBUG with ACTVT=02 from the profile and allow any other object type for S_DEVELOP. This means that development and debugging with visualization are still possible.
You can do this by linking two authorizations to object S_DEVELOP: One with all object types (except "DEBUG") and all activities and another for object type DEBUG only with all activities (except 02)."
How to achieve this?
Thanks
Galina> I try not to maintain transactions in SU24.
>...
> We have a small user population.
I can understand that, however it still has a downside when your user base grows, or you move on and someone else needs to take over, or the functional consultants leave the building and when you upgrade or apply support packs and need to make some changes, then you don't know why the authorization was added manually - at least not without having to sieve through a sea of documentation and mails etc.
It is easier to find a transport request and it's documentation IMO, and who knows about it, approved it, tested it, etc.
It is just a little organizational discipline thing, but it does go a long way.
Cheers,
Julius -
Two cost objects Sales order , OKB9 business area +order
Hi All,
While posting intercompany IR system thronging below error messageu2026
Enter only one true account assignment
Message no. KI249
Diagnosis
You made assignments to several objects in CO (cost center, order, project etc.). 2 of these have been created as true objects.
System Response
You are allowed only one account assignment for each cost-relevant account.
What we found in our system:
Conflict: Actual Sales Order 3487909 is linked to PO via account assignment category 4& IC dummy sales order (OKB9 config Business area 3000 + order 807898 assigned.
Due Two cost objects cannot be linked to one IR G/L account booking.
What is the best solution for this to post Intercompany IR with conflict two cost objects.
Regards,
AdiHi All,
we facing an issue with sales order cost objective vs OKB9 cost object.
For IC PO service material, we assigned account assignment category 4.Reasonis Service material was not showing on G\R account.
The G\L account 7898788, we assigned to Service Item (material type DIEN) , for G\Cost 7898788 cost element is assigned in OKB9. Combination business + order 3478787.
Now conflict with sales order cost objective vs OKB9 internal order cost object.
While posting intercompany IR posting system thronging below error messageu2026
Enter only one true account assignment
Message no. KI249
Diagnosis
You made assignments to several objects in CO (cost center, order, project etc.). 2 of these have been created as true objects.
System Response
You are allowed only one account assignment for each cost-relevant account
How to resolve this issue.. Do I make any config changes in the system to overcome this issue?
Or any sub account to assinment in VKOA config for internal orderu2026
Regards,
Adi -
Uix two view-objects on one entity-object synchronize
Hi All
I want to add some uix pages to an old project using ADF UIX and Business Components.
I have an entity object to a table witch about 50 fields.
Now I create two view objects due to a better performance. One witch seven attributes for the overwiew and one with all attributes for the detail page.
They are related via a view link.
I create the overview as a read-only-table and the detail-page as an input-form.
The proplem is that the synchronization don't work. The detail page shows the first dataset ever.
Has anyone a solution or a tip where I can found that?
Is where a performance problem if I use one view-object for both pages?
Thanks in advance
RogerUse custom DataAction for the first page:
package controller;
import oracle.adf.controller.struts.actions.DataAction;
import oracle.adf.controller.struts.actions.DataActionContext;
public class Class1 extends DataAction
protected void validateModelUpdates(DataActionContext actionContext)
//super.validateModelUpdates(actionContext);
// put you custom validation here
}http://www.oracle.com/technology/products/jdev/collateral/papers/10g/ADFBindingPrimer/index.html#usingdataaction
Message was edited by:
Sasha
Message was edited by:
Sasha -
Link two reports using parameters
Hi,
We are using business object XI.
I am trying to link two reports using parameters. I cannot use subreport option becuase inside the subreport I should link another report too. So,
Report 1(High level summary)
Report 2(Middle level summary)
Report 3(Detail level)
I tried to use hyperlink option and used following string.
http://<server_name>/<Virtual Directory>/object.rpt?prompt0={?param1}&prompt1={?param2}
Here is my question.
1. Server name: Does it include port number??
2. Virtual Directory: I am absolutely lost. I tried the "frsinput" directory the actual rpt file is storing. It is not working.
Do you have general path??
3. Parameters: I have 5 parameters to pass. 3 of them are Strings and the rest are DateTime.
Basically, I need any tutorial about this kinds of things. The tutorial I have got only discribe link like "www.yahoo.com"
BTW, is this even possible solution??Hi,
I am trying to link two reports in the crystal report designer->deploy to the server->show in the DHTML viewer.
When I create a URL from report A, it looks like "&" disapears. For example, I created a hyper link from report A using formula,
http://server:port/........openDocument.jsp?sDocName=reportB&sType=rpt¶mName1="Trim(ToText({?param1},"#####"))"¶mName2="+Trim(ToText ({?param2},"#######"))
But when I see the actual URL, all the "&" disappears so it looks like
http://server:port/........openDocument.jsp?sDocName=reportBsType=rptparamName1="Trim(ToText({?param1},"#####"))"paramName2="+Trim(ToText ({?param2},"#######"))
No wonder it is not working.
I guess I need special protection for "&" sign. Do you know any? -
Linking two .exe projectors
I am trying to link two .exe projectors. is there specific
actionscript to load/unload .exe as opposed to .swf files?
(PC)>Andymorph wrote:
> I am trying to link two .exe projectors. is there
specific actionscript to load/unload .exe as opposed to .swf files?
(PC)>
You could try local connection or shared object to
communicated between
two files.
What is that you try to do to be exact, I might have more
specific answer for you,
or related tutorial perhaps...
Best Regards
Urami
Beauty is in the eye of the beer holder...
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami> -
Hello all,
i want to link two elements in two JTrees
so when i add a child to one of them at run time
it will appear in the other too???
thanks in advance.well then all you have to do is to make sure that you add the same "MutableTreeNode" object, (the element you want to link) into both models. adding a child to that node will then fire the update events to the view, i.e. the tree.
-
How two join two ODS objects in an Infoset
I have an infoset that is created on two ODS object, one ODS is a business content that contains more than 30 fields and 2 Key Fields, the second one that i created contains the 2 key fields plus one additional field which was initially missing in the original ODS. Then i created a Infoset with these two ODS, now the problem is i do not know how to link these two info objects and where to specify the join condition. i right clicked and selected left join, inner join etc. whatever i did and when i try to activate the infoset i keep getting this error "Not all objects are linked with ON conditions". How can i get rid of this please help
Thanks
Akila.Ru will need to set the join between the key fields..
place mouse on the key field in one ODS..hold mouse button and drag..and then drop cursor..on same key field in the 2nd ODS..u will see a line joining the key fields b/w the 2 ODS's..
do same for other key fields too..
the connected lines are the join condition..
now activate..should work..
cheers,
Vishvesh -
How to link two selectOneListBox?
Hello, I'm trying to link two selectOneListBox. The operation is as follows, when you select a value in the first select, the second select will be charged with the values related.
I'm building the components in a programmatic way. A example code for the first select is:
ProcesosBean.java
HtmlSelectOneListbox select= new HtmlSelectOneListbox();
select.setId("select" +i);
select.setSize(1);
UISelectItems items = new UISelectItems();
ArrayList arr = new ArrayList();
for (int i = 0; i < list.size(); i++) {
arr.add(new SelectItem((ListBean) list.get(i)).getId(), ((ListBean) lista.get(i)).getValue()));
items.setValue(arr);
comboCampos.getChildren().add(items);
MethodBinding mb = FacesContext.getCurrentInstance().getApplication().createMethodBinding("#{processAction .loadSelect}", new Class[] { ActionEvent.class });
comboCampos.addValueChangeListener(new ValueChangeListener() {
public void processValueChange(ValueChangeEvent arg0) throws AbortProcessingException {
comboCampos.setValueChangeListener(mb); I tried to use "addValueChangeListener" and "setValueChangeListener" but does not work.
In the ProcessAction class, I will get the values of the second select, for the selected value, and it will charge the second select, in a programmatic way.
I thought this could be done with javascript, but I don't know how to call the ProcessAction method. Any suggestion?
Edited by: dcastellar on Oct 15, 2009 1:03 AMWell, I found a problem in the first implementation (with the a4j function), you can't change the view (ej: the values of the inputs), but it's works fine in the rest.
The second alternative, I was wrong about the object that I used. It wasn't the ValueChangeEvent not the ActionEvent. This alternative works correctly.
a example of the code that I use is: (I do not use the jsf tags, I show the components programmatically)
the bean class
HtmlSelectOneListbox select= new HtmlSelectOneListbox();
select.setValue("");
MethodBinding mb = FacesContext.getCurrentInstance().getApplication().createMethodBinding("#{processAction.loadSelect}",new Class[] { ValueChangeEvent.class });
select.setValueChangeListener(mb);the action class
public void cargarComboFormato(ValueChangeEvent event) {
}thanks for all, and sorry for my bad english. -
How can I link two charts on different pages in one document?
I have a chart on the first page How cn aI link two charts on differnetof my document. The last line is a intermediate total (formula). How can I link the chart on the next page to this total, so I can go on with the calculation without having to copy and paste the result of the first chart?
Timan,
I'm sure that you could figure out how to get along with Pages, or Numbers. Each has it's own advantages and disadvantages.
If you put all your text that doesn't need to be in the table into text boxes, you can place the text boxes over the table in any arrangement you like. Be sure to turn off Object Causes Wrap in the Wrap Inspector.
Here is an example of a single table across two pages with other text on the page:
The formula in the cell displaying 500 is =B1 * 100
On the other hand, I agree that the feature of linking to sister tables would be a nice enhancement and I encourage you to submit the idea vie Pages > Feedback > Enhancement Request.
Regards,
Jerry -
Connect two Business Object (BUS2038 and BUS0010) in Workflow!
Hi experts!
I have a Workflow based in BUS2038 (Maintenance Notification), I can see attributes like Functional Location (code).
My problem is, i can´t put Functional Location (Description) that is an attribute in BUS0010 (Functional Location) with an input Functional Location (code).
BUS2038
Input: Notification number
Output: Functional Location (code) (attribute)
BUS0010
Input: Functional Location (code)
Output: Functional Location (description) (attribute)
I want put Functional Location (description) in a mail step.
How I can achieve this?
Thank in advanceThank you Rick Bakker, I implemented this BUS0010 in BUS2038 (and delegate) but when I was testing, the link between two business objects is <nothing>. Do you need any program for connect both Business Objects?
Thank in advance!
Maybe you are looking for
-
Many - to - many view links (master-detail)
Case : I have a relation many-to-many between two tables, composed of 3 tables: Table Users ( User_Id, User_name ) // Master 1 Table Groups ( Group_Id, Group_name ) // Master 2 Table Users_Groups ( User_Id, Group_Id ) // Child (holding then many - ma
-
Material document not created for scrap
Hi all, I am doing confirmation and goods movement through Co11. When i enter more yield than planned and some scrap the goods movement are posted ,but there is no material document accounting for the scrap. Also after the final confirmat
-
Browser-based PI sheet - Export parameters
Hi All, I'm working on browser based PI sheet. I have a custom function module with characteristic PPPI_FUNCTION_NAME linked to a Process message. I'm not able to add a new export parameter and table parameters (for repeated data request). Only an ex
-
I have signed out. Erased all files from computer and rebooted. The files on the icloud at the same as Dec 11th. On my other computer they are updated. There has to be a way of forcing an icloud sync. This is ridiculous. I have wasted two hours tha
-
How to get jpegs automatically resized when placed in a book?
Hello all, New member on board here. Got a question for you guys. When I pull a jpeg into a book page (I'm using the Library theme), I'm getting a "!" in a yellow triangle. I'm assuming that means the jpeg is too big. Is there a way that iPhoto can a