Material document not created for scrap

Hi all,
I am doing confirmation and goods movement through Co11. When i enter more yield than planned and some scrap the goods movement are posted ,but there is no material document accounting for the scrap. Also after the final confirmation the order status is still PCNF. Please give your suggestions.
Looks like I am missing some configuration,do let me know.
Thank you all.

1. The scarp qty that you enter here will not generate the material document.
Reason:
The scrap enter here proportiantely increases the consumption of the components but will not produce any FG or Byproduct for the materail.
2. When should we use this .
For scenarios like : If you are wokring in chemical industry when youproduct 10 litres of paint .25 litres of the material gets scrapped as residue and you just mix it to your sewage line : Here the FG paint whichere gets scraped is not accountedd as separate mateiral but we need to consume the component
in such scenarios only the scrap should be entered in the co11
3. Also if you need to catch the activity cost then this will be used
thanks and regards
i am also intresed to get different answer

Similar Messages

FCN Document not created for SO : Message SY499-Urgent

While Saving delivery or doing PGI or while processing billing document i am getting below info message.
"FCN Document not created for SO " Message SY499.
I dont know why this message started coming now. I have added my country in VI49 settings. I wonder that due to that this message is coming.
I dont want this message to come whiel delevery processing. Pl. let me know how can this be possible.
Regards,
Vijay

Hello Sheila,
sorry - my first answer was in mistake - Status K means:
"The transaction is processed using payment cards. The order, however, does not contain valid authorization.
This problem occurs in billing documents for follow-up deliveries."
Could you check this ? Last way would be to set a breakpoint into the FM 'RV_ACCOUNTING_DOCUMENT_CREATE'
and trigger this via VF02 -> Release to accounting.
Regards Wolfgang

Acctg document not created for cancellation invoice

Hi all,
We have a vehicle sales order created with payment card. The SO contains one item for vehicle and one item for parts. The items were delivered and invoiced separately. Hence, SO has one vehicle sales invoice (VSI) and one parts sales invoice (PSI).
The standard procedure was to post VSI first before the PSI. Accounting documents have been created when both invoices were posted. However, there was a need to cancel the PSI. When this was done, cancellation invoice was created but there was no accounting document posted for the cancellation.
I tried simulating the scenario in our test server and cancelled VSI 90000081 first before cancelling PSI 90000082 to test if this can be an alternative solution. Cancellation for VSI was posted successfully but error persists for PSI cancellation.
Order 67 06/19/06 Completed
. Delivery 80000081 06/19/06 Being processed
.. Picking request 20060619 06/19/06 Completed
.. GD goods issue:delvy 4900000293 06/19/06 complete
.. Invoice 90000081 06/19/06 Completed
... Accounting document 2000077 06/19/06 partly cleared
.. Invoice cancellation 90000084 06/19/06 Completed
... Accounting document 2000079 06/19/06 partly cleared
. Delivery 80000082 06/19/06 Completed
.. Picking request 20060619 06/19/06 Completed
.. GD goods issue:delvy 4900000294 06/19/06 complete
.. Invoice 90000082 06/19/06 Completed
... Accounting document 2000078 06/19/06 Not cleared
.. Invoice cancellation 90000083 06/19/06
.. Invoice 90000085 06/20/06 Blocked
Accounting status of 90000083 (where error occurs) in VF03->Header->Details is set to K or <b>Accounting document not created (authorization lacking)</b>.
Any inputs? Thanks in advance.

Hello Sheila,
sorry - my first answer was in mistake - Status K means:
"The transaction is processed using payment cards. The order, however, does not contain valid authorization.
This problem occurs in billing documents for follow-up deliveries."
Could you check this ? Last way would be to set a breakpoint into the FM 'RV_ACCOUNTING_DOCUMENT_CREATE'
and trigger this via VF02 -> Release to accounting.
Regards Wolfgang

Accounting document not created for PGI

Dear All,
I have done PGI for Delivery document.
The movement type is 601 and Special Stock indicator is E (Order 0n Hand).
While PGI material document has been created but accounting document has not created.
Waiting for your valuable suggestion
Thanks & Regards,
Ratish

Accounting / Materil Document in PGI:
These settings are pre configured by the SAP, Accounting document is generated based on the following combination-
Valuation Class in the Material Master + Account Modifier + Transaction Event = GL Account
These account modifier is assigned to Movement type settings in Transaction OBYC of Accounting and these Account modifier is determined based on the Movement type availabe in Delivery.
Material Document is generated based on the number range assigned on the combination of Documen type(WL) + Transaction code.

Follow on Document not created for the Purchase Request.

I can able to create a purchase request for the material with quantiy equal to or more than 16. If I create a purchase request for the same material with quantity less than 16., Follow-on Document not getting created. I checked the transaction BBP_PD, it does not show other status like Shopping card ordered , approved, Items in Transfer Process and Follow-on Document created. Any Reason for this.?

Hi,
please check if there is any tolerance enabled
Regards

Accouting document not created for PGI

Dear All,
I have done PGI for Delivery document.
The movement type is 601 and Special Stock indicator is E (Order 0n Hand).
While PGI material document has been created but accounting document has not created.
Waiting for your valuable suggestion
Thanks & Regards,
Ratish

thanks for the reply.........
for movement type 601 and without special stock indicator accounting document has been created along with material document.
but for the MTO Scenario the material which are dispatch with special stock indicator "E" with movement type 601. for this scenario material document has been created without Accounting document.
Waiting for the reply.................
Regards,
Ratish

Profit center document not created for initial stock upload

Hi Gurus
We have created initial stock upload for one of the inventory items through movement type 561.Though the profit center was populated in the line items the profit center document has not been created and when we go and run balance sheet profit center wise there are no results for display? Any suggestions ?

Hello,
Check your 3KEH Settings
Check your OKB9 account determination
Make sure you have profit center number ranges in GB02
Regards,
Ravi

Accounting document not created for the billing document in CIN

Hi Experts,
I have made conditon records for BED, CESS, Edu Cess and VAT. I hve defined the accounts in both excise transactions and VKOA Settings even then the accounting document is not getting created. I am getting the following error.
No account is specified in item 0000001003
Message no. F5670
Help to solve the above
Thanks in Advance

Open the document in VF02 / VF03, go to Environment -> Acct. Determination Analysis -> Revenue Accounts. (You can also press CtrlShiftF12). There check for the item no. 1003. You'll find no account has been determined for this item through any procedure.
In the right pane, it will also give other details like CoA, Sales Org etc (as per your access sequence) which it tried to find the account for. Assign an account for that combination in VKOA and then try to release the doc for accounting. It should work if you have assigned correctly.
Ravi.

Profit center Document is not created for Balance sheet items

< MODERATOR: Message locked. Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
Dear all,
Profit center document is not created for balance sheet accounts , where i specified in 3KEH (default profit center for balance sheet a/c's) , i did n't do any changes , if i do any changes in dev , then i will transport to quality there is no pending requests
Same entry In quality environment profit center is updating and creating profit center document for balance sheet accounts . I compared with actual posting settings like Maintain Document Types and Define Number Ranges for Local Documents but it is same as development
regards
Govind
Edited by: Govind Yadav on Sep 24, 2008 8:33 PM

Is any body find the solution of this problem
I am also facing the same problem Profit center document is not getting created from any MM document
3KEH configuration is there but still the system not generating the Profit center document for those materials where there is no profit center assigned in the material master data and in 3KEH i have configured that it should post to dummy if there is no profit center in the material master data
Please tell me if some one have the solution to this problem
Bilal

Pur. req. not created for Dep.req. of Sub. Contracated Material after MRP

Hi Guys,
Pl. observe the below scenario,
Our client scenario is Make-To-Order
u2022     Sales order is created for FG material in plant "0001"
u2022     Material BOM is created for FG material in Plant "0001" with 10 raw materials
u2022     Routing is created for FG material in plant "0001"
u2022     Now MRP is carried out for the FG material, system created Planned order/Purchase requisitions as defined in field u201CProcurement typeu201D in MRP tabs.
u2022     Purchase requisitions are converted into Purchase orders and against some of the GR is done.
u2022     Due to some reason, we wanted to subcontract the FG (vendor is u201Cexternal vendoru201D or another plant with in Karle Group).
u2022     Steps followed to subcontract the FG material
1.     Converted planned order into Purchase requisition
2.     Converted Purchase requisition into Purchase order.
u2022     Now some more raw materials added into FG material BOM in plant "0001" and carried out MRP with planning mode indicator as u201C2 i.e. re-explode BOM and Routingu201D.
u2022     In T.Code u201CMD04u201D checked to procurement proposals for newly added materials in plant "0001", found out that, system is not generated the purchase requisitions.
Kindly help me this...
Regards,
Satya Prakash

Dear Satya Prakash,
If the entire operation is sub contracted ,please try the following steps.
1.Let the system create a planned order.Create a production order.
2.Change the control key under the operations tab to PP02.Fill in the required details such as
a.Purchase group.
b.Cost element etc and SAVE the order
3.This will generate a PR.
Create a Sub contracting PO and process further.
After the receipt of PO.Close the order.
Regards,
Joseph Charles Vaikathussery

Account document not created Message no. VF062 for the pricing procedure

When I tried to create an invoice I came across this problem of Account document not created Message no. VF062.
I created a pricing procedure with base price,BED,EDU CESS,HIGH EDU CESS ,VAT,CST.
Condtion record was set for each pricing condtion type.
Sale order>delivery->invoice
When invoice was stored i get the message accounting document not created.
After that i changed the condtion class of (BED,EDU CESS,HIGH EDU CESS ,VAT,CST.) from D-tax to B-price.Now the invoice is stored without the messag(accounting document not created).What will be the problem associated with this

i changed the condtion class of (BED,EDU CESS,HIGH
EDU CESS ,VAT,CST.) from D-tax to B-price
Whaterver condition types you have with condition class as D, I am sure, you should have assigned some Account Keys in your Pricing Procedure. Ensure that those Account Keys are appearing in OB40 as otherwise, you will face this issue.
G. Lakshmipathi

FI - Accounting Document not Created

Hi Forum,
At the time of Billing Invoice creation (VF01), system giving an error in the Header "Posting document not created (export data missing)" & Foreign Trade data is INCOMPLETE.
for this reason, i am unable to post the accounting Document.
Can anyone help me on this issue.
Thanks In Advance.
Kishore

Dear Kishore,
Check the customer master and what country you are sending the goods for.
If the customer is a Export customer, you need to fill in the Export data in the material master and configure the foreign data in customizing.
Thanks
Augustine Ponraj.

Bposting document not created(acccount determination error)

Dear All
when i am creating invoice in vf01, the system is unable to create accounting document
i have checked acc assignment of customer and material its their, but still its giveing erro
error in acc determination
this is the message iam geting
Bposting document not created(acccount determination error)
how to resolve this issue
Thanks
jahangir

Hi Jahangir,
Go to VF02 --> Enter --> In change overview screen --> Click at "Enviroment" (Menu) --> Click at "Acc. Determination Analysis" --> Click at "Revenue Accounts"
You can see the condition types there ---> Open the tree one by one --> see the details on right side --> check for which combination the G/L account is missing
Maintain the entry in VKOA.
After that come back to VF02 and release the document.
If the error still there then check the analysis, whether the required record determined or not.
Hope this helps.
Regards,
MT

Material document not updated in inspection lot QALS table

HI
The inspection lot created for 04 inspection type during Goods Receipt.
The material document is appearing in the inspection lot but found not updated in table entries. i.e.., QALS -MBLNR
When i checked other inspection lots it was found updated. How this happened ?
Any Snote to be applied?
Thanks

Hi,
Check the number ranges for material documents. (with year) for document type WE in OMBT transaction code.
If same material document number repeats in the same calendar year,then document update will be terminated.
As, document no. will be already existing in tables, system won't allow to update the same no. again.
Thanks & Regards,
Anand.

Different material document number range for Services

Hi,
I want to make different material document number range for services.
I have created ZE document type from WE .
But if I see group in OMBT , i am not able to assign ZE there. How to do this?
Regards
Kedar

Hello,
No ! I am not able to see ZE there.
Kedar

Material document not created for scrap

Similar Messages

Maybe you are looking for