Links inside a table view for a few rows and not all
HI
I need some help wherein i have the a tableview which has some rows showing document numbers.
Now the issue is i want some rows to be acting like links and other rows to be just values .
Can this be done?
Hi,
You can achieve this by using Iterator. See the code below it should give you some idea. Here m_row_ref is the row currently rendered.
method IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START.
CASE p_column_key.
WHEN 'LINK'.
IF m_row_ref->link_flag = 'Y'.
p_replacement_bee = CL_HTMLB_LINK=>FACTORY(
id = p_cell_id
text = m_row_ref->ORDER_NUM
onClick = 'myEvent' ).
ENDIF.
ENDCASE.
endmethod.
Similar Messages
-
I have an ipod 1st generation and i cant get the games to play. I tap on a game and it shows up for a few seconds and disappears. I can see that when games pop up they say loading on the bottom. They have all been downloaded for awhile. I'v tried restarting ipod by pressing on/off andhome button at the same time and that didnt work.
What is the Other on my iPhone and How to Remove It
Also
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software -
How to create a view in table DB for a few servers
Hi
We need to create a table Country that will hold the countries data.
I would like to create it in a way that it will be common for all the servers - but as a view. not the real table, only a view to see the data and not to change it.
How do I do it?
Thanks in advanceHi,
+Other servers - i meant other table spaces.+
+I need the same table to be read from other table spaces .+
+I have 2 table spaces:+
+1. OBITUARIESCS+
+2. ADVERTISEMENTCS+
+I would like to create one table in OBITUARIESCS that will have a i don't know how to call it - but another access from ADVERTISEMENTCS.+
+Why do I need it?+
+Because when I work with my application I have to define the DB. and I want to define only ADVERTISEMENTCS but to use one table from OBITUARIESCS with a view or something like that+- See, Basically When you created a User, he will be assigned a default tablespace where the tables are stored when the user created. As as per requirement you can assigned some quota or unlimited permissions on list of tablespaces
to the user. Based on the your Application he can create the tables in respective tablespaces.
Now, coming to the problem if the respective user which you are accessing is stored the table in "OBITUARIESCS" tablespace, then the table will not be there in "ADVERTISEMENTCS" tablespace. At user level he can access the data from both the tablespaces.
As you said above that one process should access "ADVERTISEMENTCS" and view from "OBITUARIESCS".
If you the application user is having the rights on the "ADVERTISEMENTCS" then he can not access the "OBITUARIESCS" which might belongs to different users schema. For that try to Grant the privileges on that certain table to required users which your application is using. That's solves your problem based on my understanding with your question.
@ justin -- I am late sir.
Pavan Kumar N
Edited by: Pavan Kumar on Nov 26, 2008 9:10 PM -
Calling a Breadcrumb image inside a Table view column
Hi
I want a sample code to call any bread crumb related image inside a table view column.
Please help with a code snippet.I mean that, inside the iterator class of the tableView, write this code in the RENDER_CELL_START method.
method IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START.
CASE p_column_key.
WHEN 'ICON'.
p_replacement_bee = CL_HTMLB_IMAGE=>FACTORY( id = p_cell_id src = '@3J@' ).
ENDCASE.
Inside the method, GET_COLUMN_DEFINITIONS you need to append a column for icon, see the code below:
APPEND INITIAL LINE TO p_column_definitions ASSIGNING <def>.
<def>-COLUMNNAME = 'ICON'.
<def>-TITLE = 'Display Icon'.
For more info you can refer to weblog on HTMLB TableView Iterator by Brian.
Hope I am clear.
Regards,
Ravikiran.C -
How to get the List of Database Objects (Table/View) for a given APEX Page.
Hi,
I have an application and that consist of pages like page1,2,3,.....
*1.* I want a report which can give me the list of all the Pages1,2,3,....
I am using the following query to acheive this.... THIS IS FINE..
select a.workspace, a.owner, a.application_name, b.page_id, b.page_name
from apex_applications a,
apex_application_pages b
where a.workspace = b.workspace
and a.application_id = b.application_id*2. Now, I want for each individual page*, the list all the database objects (tables/views), which that page is using.
I am using ALL_DEPENDENCIES , but I am not getting the result.
So, want to know if there any view/table, where I can get the Application Pages & there database object list...
Thanks,
DeepakHari,
Thanks for the response.
The view APEX_APPLICATION_PAGE_DB_ITEMS will only give me the table name related to any Page Items defined to that page..It will not give me all the database objects..
suppose we have a Page, having a report based on multiple tables and there is no Page items defined on that page, we will not have any value in this ....DB_ITEMS table. same thing if we have define some PL|SQL(using some table/view) in a Process, that will not be populated in .....DB_ITEMS table. I want some thing like all the database objects (table/views/function/procedure/.....) for a particular Page ID.
Thanks,
Deepak -
Message no. B1402- Table KONP for object class COND_A is not defined.
Hi
I m using BD52 transaction for message type COND_A and am getting this error for table KONP saying it is not defined for COND_A.
Can you please let me know which transaction is used to update this information.
Thanks in advance
SanaIn note 309342, for error message no.B1402, following solution is given.
Solution
The system issues warning message B1402 " Table KONP for object class COND_A does not exist" for each entry with table KONP and you can ignore this by pressing Enter respectively. Then you can maintain the entries or navigate.
If the KONP entries bother you since you use Transaction BD52 frequently, you can remove them manually. To do this, you can also use Transaction BD52. The functions are not changed by this deletion. However, the issue of the bothering warning message is suppressed. Table TBD62 is client-dependent that is, you have to make the correction on each active client.
A related problem exists with table TBD22. During the setup of reductions (that is, new output types which only send a subset of the data of output type COND_A), the corresponding entries in table TBD62 (Transaction BD52) are generated from table TBD22. To avoid the same problem as described above with the new output types, remove the entries of TBD22 with MESTYP COND_Y and CDTABNAME KONP. You can do this with the help of view V_TBD. Transaction SM30, as an output type, select COND_A. Here, remove all entries with segment type EKONP and table name KONP.
Table TBD22 is client-independent.
A correction of tables TBD22 and TBD62 by means of an R/3 Support Package is not possible since the tables have delivery classe 'G'. SAP cannot delete entries in the tables.
thanks
G. Lakshmipathi -
TS1424 A few purchased Songs only play for a few seconds or not at all...
I have a few songs that after purchasing on i-tunes, they play for a few seconds and that's it. How do I fix this? Do I have to delete them from my i-tunes folder and then go to songs purchased and download them again?
Yes, assuming you are in a region where you are permitted to redownload your music purchases delete the copies of the corrupt tracks from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If the problem persists contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
tt2 -
Hi Everyone,
This problem just started today. When I turn on or restart my Macbook Pro Retina 15" (Mid 2012 version), my screen is light gray like normal, and then after a few seconds my entire screen flashes completely bright yellow for a few seconds, and then it goes to the normal Welcome screen (where I choose to login as myself or a guest user). This suddenly started today and has not stopped since. This keeps happening every single time I turn on or restart my computer.
Yesterday I installed all the Mavericks and other updates that were available in the App Store, so I'm wondering if this is related to that since this never happened prior to my doing those updates yesterday. When I first installed the new OS X Mavericks (10.9.3) update, it went through the whole installation process (took about 10 minutes), and then during the installation I got an error message saying that it couldn't verify my iTunes application that was on my laptop, and then my laptop finished installing the updates. Then once my laptop restarted, the App Store "Updates" section said that I had to do the whole OS X Mavericks (10.9.3) and iTunes (Version 11.2) updates all over again. So my laptop did the whole installation again (took about 10 minutes, but this time I didn't get that "iTunes error message" during the installation process).
Now, when I go to the App Store "Updates" section, it says the following under "Updates Installed in the Last 30 days":
-Digital Camera RAW Compatibility Update (Version 5.05) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-Security Update 2014-002 (Version 1.0) installed April 22, 2014
I'm wondering if this flashing bright yellow screen upon bootup is related to the fact that my laptop installed the OS X Update and the iTunes Update two times each? Or is this new problem totally unrelated? It's just that this problem started a day after these 2 updates were installed twice.
My Macbook Pro Retina 15" (Mid 2012 version) is otherwise working fine at least as of now. The only issue so far is this flashing bright yellow screen every time I turn on or restart my computer.
If anyone could please help me fix this so that my bootup screen doesn't flash completely bright yellow anymore, I would be forever grateful!
Thank you so much for reading this and for any help you can provide.
hope everyone is well,
ElaineHey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine -
Dock disappears for a few seconds and minimized apps open up
Hello
My dock at the bottom of the display will disappear for a few seconds and at the same time, my minimized open applications will open up. This usually happens when I'm running a few light applications at once. It almost seems to "gulp" or catch it's breath.
I'm not sure if this is related but for the second time since purchasing the machine the dock is showing a sort of double reflection at the very bottom. An open application has what looks like two lit triangles underneath the icon instead of the usual one triangle. The same area at the bottom of the dock shows a very tiny "bottom" of the page I have open, in this case Safari. It also moves left and right as I move the open page left and right. If I move the page down, the sliver at the bottom of the dock moves up.
This is only the second time this has happened. The first time it went away on it's own and today it's back. It's not troublesome at all but I'm just wondering what may be causing these symptoms.
Thanks!Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
How to create a public view for sharepoint list A and deploy this view to specific user personal view? Is that possible OOTB?
Views cannot be exported or moved. Can you elaborate your requirement?
--Cheers -
I am using an apple TV to show a slide show which is sent via WiFi from a mini computer. The slide show repeats for a few hours and then stops and shows "no signal". What's going on… and how do I get the show to cycle indefinitely? (I have set the server to NEVER sleep)
Welcome to the Apple Community.
Have you also set the Apple TV not to sleep. -
Hi all,
I need help with my iphone4s.
When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?
What seems to be the problem here?
thanks and regards
WanWanlucg wrote:
When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
After sleeping MacBook Pro 15.4" mid 2012 model (running Mac OS X 10.10.2 Yosemite) for overnight and pass 24 hours time, upon wake from sleep-- the dock background is white for a few seconds and then it turns back to the normal color.
Is this normal? Should I be worried? Is my GPU defective?
My specs:
MacBook Pro 15.4" Mid 2012 model, Ivy Bridge Quad core i7 2.3Ghz CPU w/ hyperthreading,
16GB RAM, Nvidia 650M 512MB VRAM/Intel 4000 HD 1GB VRAM, 500GB HD
Running Mac OSX 10.10.2 Yosemite.
Thanks to all in advanced.It doesn't happen all the time but sometimes and i tried zapping the PRAM and it still happens!
-
I have an ipod touch 3rd generation 64gb and it has iOS 5.1.1 and it will connect to my WiFi for a few seconds and then nothing will load. It says I have full connection bbut nothing works. I have 2nd generation ipod and it connects fine. Along with my laptop and xbox 360. I have tried downgrading it and restoring it from itunes. I also tried forgetting the network and inputting it myself but it sti does the same thing. I even tried resetting my wireless modem but it still didnt make a change. I really could use some help. I can't call apple cause im no longer under warranty.
Reset the iPod and connect to its syncing computer. It it shows in iTunes restore the iPod.
Next see if placing the iPod in recovery mod will allow iTunes t see the iPod so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
when i try starting my IPod it won't start, the Apple logo comes up for a few seconds,and then. it just shut off . I tried to charged it through an outlet, the IPod didn't eve charger so I tried to restore my setting in my computer, i tunes won't
But that requires the computer to see the ipod. I am having the same problem and I keep being told to restore it, but you have to either get the ipod to turn on or have the computer see it in order to so that. Right now I have a pretty useless 32GB ipod touch cos I cant get the thing to turn on! I can only get the apple logo for like maybe 20 seconds and it goes away. Ive charged it for days on a wall charger, on the computer usb charger, and on a speaker charger. Nothing works.
Maybe you are looking for
-
What is the best way to copy a DVD I made from iMovie? It was HD720 and I don't want to lose any quality in the copies. I need to distribute it to about 20 people. It's 42 minutes long.
-
I'm using adobe designer 7 how to put dataObject in my pdf form ?
-
My brother has a Mac Pro 2,1 Quad Core and OSX 10.5.8 Recently the DVD player/recorder will not play back, but does record. Is this a hardware or software problem?
-
Using On Error Goto, Still Getting error
My code loops through a list of files in a range. For each file name it goes to a network folder and opens that file, does some work and then closes the file. When the file is not in the folder I get an error on this statement: 'Where "CurrentFileNam
-
Hello Guys, We are planning to migrate the datasource from 3.5 to BI 7. The issue is how can we migrate the Routines.... 1) Is it like we need to manually write the routines in the transformations ?????.