Linksys E4200v1 is a little unstable when using torrent.

So, i have a little annoying problem with my E4200. V1 with the latest 04 fw.
It seems, that after many hours of downloading at full speed (only one torrent at a time) the speed goes down, and up again, and becoming unstable. My max download speed is 1.5 Mb/s, and it can drop from that, to 50 kb/s, and then up again. and i have no internet access when that happend, but it only last 10-20 seconds and then its back again. Sometimes i get that yellow warning sign on the taskbar which says "No Internet Access" but not always.
Seems like its happening after many hours of downloading at full speed.
im on the latest firmware, have tried different channels, 20 Mhz only on Channel Width, different names on the 2.4Ghz and 5Ghz channels.. i use the 2.4Ghz channel btw.
Otherwise its stable, and i have had no problems while gaming online.

Try to isolate the problem by connect the computer staright to the modem and check if internet is stable from there. If stable, then connect the computer to the router if stable then the problem could be with the wireless part of the router. If your computer's wireless adapter supports 5Ghz then try to connect to it. If not try to optimized the router's advanced wireless settings. Go to this link:http://192.168.1.1/Wireless_Advanced.asp.
beacon 50; dtim 3, frag 2304, rts 2305

Similar Messages

I use MAC OSX Lion 10.7.5 which has become unstable when using Internet and Pages. Any ideas?

When using word, pages or email the cursor jumps around all over the document placing the typed information anywhere!
I am having to constantly rewrite emails and documents
Even writing this question has taken three attempts.
Any ideas what I can do to solve the problem would be really appreciated.
Could it be a keyboard problem (mine is wi-fi)?

please someone answer!

870A-G54 Realtek LAN crash when using Torrents

The network card on my MSI 870A-G54 crashes when downloading or uploading using torrents. It takes around 20-30min until I lose network connection and I have to reset the network card to make it work again.
I have tried all the official MSI driver, Windows Update driver and a driver downloaded directly from realtek but the problem remains. I'm using Windows 7 x64 and I have the latest BIOS version (updated today).

Quote from: veckans on 11-February-11, 01:50:27
It is not the clocks, I have ran this CPU for a year at these clocks unlocked. It's a solid clock.
I cannot reproduce the error with or without clocks at the moment, don't know why.
Maybe ,maybe you simply got flooded or something.Are you using a decent firewall to protect you ?!At least such firewall protects your hardware even if the connectivity still goes down.
P2P is a "dangerous" thingy in many aspects.Make sure you use up to date clients.
The CPU can go bad even if it worked one year too.That silicon had one core disabled due to an objective factor.

Why is the print lighter and the photos a little blurry when using Firefox?

It started on yesterday, Jan 4, 2012. With Firefox, the print is lighter and harder to read, and the photos, in general, seem unfocused/a little blurry unless you look real close. i didn't have that problem before switching over fro Safari.

Yes, just Safari. In Chrome, Firefox and all other applications it works as expected.

MOVED: 870A-G54 Realtek LAN crash when using Torrents

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=145633.0

Quote from: veckans on 11-February-11, 01:50:27
It is not the clocks, I have ran this CPU for a year at these clocks unlocked. It's a solid clock.
I cannot reproduce the error with or without clocks at the moment, don't know why.
Maybe ,maybe you simply got flooded or something.Are you using a decent firewall to protect you ?!At least such firewall protects your hardware even if the connectivity still goes down.
P2P is a "dangerous" thingy in many aspects.Make sure you use up to date clients.
The CPU can go bad even if it worked one year too.That silicon had one core disabled due to an objective factor.

Can I turn off the setting that displays the height and width in a little black box when using the marquee tool?

In Photoshop CC, on a mac...
When using the marquee selection tool, a little black box pops up next to the curser and displays in real time, the height and width of the selection. The same annoying box also appears when dragging an item with the move tool, displaying the numerical location of the cursor. Is there anyway to turn off the display of that little black box? It is driving me bonkers.

Under the preferences cmd/ctrl-k click on "Interface". At the bottom of the UI is a drop down box for show transformation. Set that to "Never"

Airport Express not working when used with Broadband Router **HELP!!!**

Hello.
I have an ethernet network in my house, and I am connected to the network via a Linksys router for Broadband VOIP and internet. I am on a G5 in my home office and want to stream music to my Airport Express for my home stereo in the living room, via the ethernet connection.
The problem is that when using the router in my network, only the Admin Utility sees the base station-- iTunes does not.
If I remove the router from the equation altogether and plug the network ethernet cable directly into the G5, the AX in the other room works just fine and I can get internet on the G5 in the office. The problem is that I need the router to operate my Vonage VOIP phone service and to connect a second computer to the internet as well. The IP address for the router in the home office is "192.168.x.xxx" and when I try moving it to the living room and connecting the AX to it, the Admin Asst doesn't see the AX at all.
When I connect the router to the network in the office, I can use internet on both computers and the VOIP phone service, and the AX Admin Asst. sees the base station from the other room. But again, iTunes does not.
Is there a way to configure the router to see the AX?
Thanks for your help!

Forgive me if this a little off thread, but I have just managed to get this to work and thought it might help people with similar configuration issues (mix manufacturer wireless networks)
I received an Airport Express (FW v. 6.3) for Christmas this year. I already am using a D-Link DI-524 wireless(G) router (Rev A FW 1.03) for my Comcast cable modem in my house (downstairs). What I wanted to do is to add the Airport Express in my office upstairs to my network (client mode) so that I could print from my HP Deskjet 3740 printer and listen to iTunes on my stereo through Airtunes. I have two iBooks (G3) with regular (802.11b) airport cards in them) running Tiger.
I ran into a couple of snags though. I could see the printer in Rendezvou and I could see the airport express in iTunes. I however could not print to the printer or connect to the speakers. I was able to connect to the speakers very intermittenly and then the audio would be disrupted every few seconds.
After a bit of hacking, what I found is that it seems that WPA PSK security doesn't work between the two. I changed the security to 128 bit WEP (ASCII mode). This means that you need an exactly 13 character pass phrase. This is necessary because Apple (and pretty much only Apple) supports 40 bit WEP (5 chars) and D-Link (and the rest of the Windows wireless universe) supports 64 bit WEP (7 chars), but they both support 128 bit WEP. I assume you could set both up as an open network if you were far enough from your neighbors, but I am in a townhouse complex, so I thought I probably better have some security on the network.
Now I only see one network (the one set up on my D-Link router) and I can print to my printer and stream to my stereo through iTunes (without disruption). Seems to work seemlessly now.
I should also mention that I did about three other things. I moved the LAN subnet on the D-link router to 192.168.1.1 (DHCP client address are now between 1.100 and .1.200) I had heard that this was necessary since both routers tried to use the 192.168.0 subnet, but I think this is only necessary in relay mode. I also statically assigned the IP address for the Airport Express. Finally I set up a firewall rule of Source WAN/LAN IP addresses of 192.168.1.100-200 of any protocol from ports 1-20000 to the same destination address range should be allowed to allow for all LAN traffic to be passed. I am very certain this is unnecessary and possible dangerous for security, but I thought I should mention that I did it.
Hope this might help someone.
Michael
iBook G3 (600 MHz) Mac OS X (10.4.3) D-Link DI-524 Router. Motorola Surfboard Cable Modem. Comcast Broadband

Unstable when Wi-Fi connection dropped

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/927170]]</blockquote>
Firefox is unstable when Wi-Fi connection dropped. Very silly. When connection dropped, I want to look other tabs that already loaded but popup message "Firefox is not responding" WTF??
That not nice when firefox is freezing all tabs where I can't look. I had to wait for firefox to working again. I use WiFi Linksys and it always drop connection. Computer OS Win7 64 Bit, Dual Core Intel E6600, 8GB RAM and freespace 4GB of 40GB HDD.

Duplicate Thread LOCK please
* Continue here - https://support.mozilla.org/en-US/questions/927170

Adobe Photoshop CS4/5 Crashes when using the Move Tool

Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2

Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel

Application crashes when using JNI with Jdk 1,2, 1.3 and 1.4

Hi!
I have this application that has a GUI written in Java and a file parser written in C. JNI is used to connect these parts together. The problem is that the application only works when I am using jdk 1.1.8 but not when using jdk1.2, jdk1.3 or jdk1.4. I am running the application on a Solaris 8 machine.
I have not written the application myself but I am going to be working with it from now on. But I have today little knowledge with JNI and I have tried different approaches to solve the problem. For example I have tried to used DDD together with GDB to find out what the problem is but with no luck. When I run the application using jdk1.4 I get the following error when the JVM crashes:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 10 occurred at PC=0xFA023164
Function=Java_Bitmap_setDebug+0x1C
Library=/usr/u/lal/micview/micview2_1_0_beta1/libBitmapImpl.so
Current Java thread:
at Bitmap.setDebug(Native Method)
at DisplayPanel.loadFile(DisplayPanel.java:396)
at MicPlot.loadFile(MicPlot.java:1452)
at MicPlot.loadFile(MicPlot.java:1441)
at MicPlot.miOpen_Action(MicPlot.java:1267)
at MicPlot$SymAction.actionPerformed(MicPlot.java:1184)
at java.awt.MenuItem.processActionEvent(MenuItem.java:588)
at java.awt.MenuItem.processEvent(MenuItem.java:548)
at java.awt.MenuComponent.dispatchEventImpl(MenuComponent.java:285)
at java.awt.MenuComponent.dispatchEvent(MenuComponent.java:273)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:452)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
Dynamic libraries:
0x10000 /opt/java/jdk1.4/bin/java
0xff360000 /usr/lib/libthread.so.1
0xff3a0000 /usr/lib/libdl.so.1
0xff280000 /usr/lib/libc.so.1
0xff270000 /usr/platform/SUNW,Ultra-4/lib/libc_psr.so.1
0xfe000000 /opt/java/j2sdk1.4.1/jre/lib/sparc/client/libjvm.so
0xff220000 /usr/lib/libCrun.so.1
0xff200000 /usr/lib/libsocket.so.1
0xff100000 /usr/lib/libnsl.so.1
0xff1d0000 /usr/lib/libm.so.1
0xff250000 /usr/lib/libw.so.1
0xff0e0000 /usr/lib/libmp.so.2
0xff0b0000 /opt/java/j2sdk1.4.1/jre/lib/sparc/native_threads/libhpi.so
0xff080000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libverify.so
0xff030000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libjava.so
0xfe7e0000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libzip.so
0xfe4e0000 /usr/lib/locale/en_US.ISO8859-1/en_US.ISO8859-1.so.2
0xedd00000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libawt.so
0xfc480000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libmlib_image.so
0xfc410000 /opt/java/j2sdk1.4.1/jre/lib/sparc/motif21/libmawt.so
0xeda80000 /usr/dt/lib/libXm.so.4
0xfa090000 /usr/openwin/lib/libXt.so.4
0xfa3d0000 /usr/openwin/lib/libXext.so.0
0xfc7e0000 /usr/openwin/lib/libXtst.so.1
0xed980000 /usr/openwin/lib/libX11.so.4
0xfa2a0000 /usr/openwin/lib/libdps.so.5
0xfa3b0000 /usr/openwin/lib/libSM.so.6
0xfa1d0000 /usr/openwin/lib/libICE.so.6
0xed880000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libfontmanager.so
0xfa390000 /usr/openwin/lib/locale/common/xlibi18n.so.2
0xfa1b0000 /usr/openwin/lib/locale/iso8859-1/xomEuro.so.2
0xfa190000 /usr/lib//liblayout.so
0xfa050000 /usr/openwin/lib/locale/common/ximlocal.so.2
0xfa010000 /usr/u/lal/micview/micview2_1_0_beta1/libBitmapImpl.so
Local Time = Thu Oct 3 13:32:47 2002
Elapsed Time = 35
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.1-beta-b14 mixed mode)
# An error report file has been saved as hs_err_pid27692.log.
# Please refer to the file for further information.
Abort
From this information I think that the problem should be in the native method setDebug. But I have tried to set a breakpoint at the beginning of that function in the C part but with no luck. The application crashes before it reaches that position in the C file.
What could possibly go wrong between the setDebug function in the C part and the function call in the Java part?
When using GDB, GDB cannot figure out what is wrong it just returns a hex address, no function name.
I would really appreciate some help. I have tried everything that I can come up with!
Best regards
Lars

I have figured out that the application fails on its first call to the native methods.
So I have this Bitmap class that contains all the native calls and it is defined shortly as follow:
public class Bitmap {
static {
System.loadLibrary("BitmapImpl");
native void setDebug(int debuglevel, int statistics);
There are many more native methods defined in Bitmap, but I only show the setDebug method because that is the first one that is executed and also the one that immediately fails.
My setDebug C function is defined as follow in BitmapImpl.c
#include <time.h>
#include <stdio.h>
#include <limits.h>
#include <fcntl.h>
#include <jni.h>
#include <math.h>
#include <errno.h>
#include "Bitmap.h"
#include "data.h"
jint debug = 0;
jint statistics = 1;
JNIEXPORT void JNICALL Java_Bitmap_setDebug
(JNIEnv *jenv, jobject jo, jint d, jint s)
debug = d;
statistics = s;
My libBitmapImpl.so file is compiled using the following Makefile and using GNU gcc:
JAVAPATH=$(JAVAINCLUDEPATH)
LMACRO=-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DSOLARIS
CSOURCE=BitmapImpl.c
all:
gcc -O3 -G $(LMACRO) -I$(JAVAPATH) -I$(JAVAPATH)/solaris \
$(CSOURCE) -o libBitmapImpl.so
It is still a total mystory why the application fails. I have tried it on a RedHat Linux machine and there it works fine. But not on Solaris. Only if I use the jdk1.1.8 but not a later one.
Would really appreiciate some help!
Best regards
Lars

Hi! I'm just having a little trouble when it comes to battery charging of my iPhone 5 with its new iOS 7! It doesn't indicates that the battery is fully charge unlike the old version of iOS! They said it should be pulsating but it's not

Hi! I'm just having a little trouble when it comes to battery charging of my iPhone 5 with its new iOS 7! It doesn't indicates that the battery is fully charge unlike the old version of iOS! I already read some reviews and discussion about this. They said that the lightning bolt should pulsate when charging but it's not!

Thanks for the replies. It took a while not hearing anything so thought I was alone. I have done many of the suggestions already. The key here is that it occurs on both phones with apps, and phones still packaged in a box.
A Genius Bar supervisor also checked his Verizon data usage log and found the same 6 hour incremental use. Suprisingly, he did not express much intrigue over that. Maybe he did, but did not show it.
I think the 6 hour incremental usage is the main issue here. I spoke with Verizon (again) and they confirmed that all they do is log exactly when the phone connected to the tower and used data. The time it records is when the usage started. I also found out that the time recorded is GMT.
What is using data, unsolicited, every 6 hours?
Why does it change?
Why does it only happen on the iPhone 5 series and not the 4?
Since no one from Apple seems to be chiming in on this, and I have not received the promised calls from Apple tech support that the Genius Bar staff said I was suppose to receive, it is starting to feel like something is being swept under the rug.
I woke up the other day with another thought ... What application would use such large amounts of data? Well ... music, video, sound and pictures of course. Well ... what would someone set automatically that is of any use to them? hmmm ... video, pictures, sound. Is the iPhone 5 succeptible to snooping? Can an app be buried in the IOS that automatically turns on video and sound recording, and send it somewhere ... every 6 hours? Chilling. I noted that the smallest data usage is during the night when nothing is going on, then it peaks during the day. The Genius Bar tech and I looked at each other when I drew this sine wave graph on the log print outs during an appointment ...

Cannot get hardware limits to work when using Lintech switches with a ACR9000 motion controller

This has been my conversation with Parker Automation.
From: Susan Connors <[email protected]>
Date: April 21, 2015 at 8:52:55 AM CDT
To: Bowlerdusty <[email protected]>
Subject: Re: ACR 9000
Hi Dustin,
Since the product was not purchased from us, or through the Parker website, but through National Instruments, you would need to contact them and they should be able to help.
Regards,
Susan
Susan Connors
Customer Service Representative
Cross Company - Automation Group
Employee Owned Since 1979
Direct Dial: 704-755-1048 Fax: 704-523-6500
Toll Free: 1-800-866-4568 ext 5352
On Mon, Apr 20, 2015 at 4:16 PM, Bowlerdusty <[email protected]> wrote:
Hi again. Since last speaking, we have gotten the motor to move. The only thing we are struggling on now is getting the hardware limits to work. We are using switches provided by Lintech. One pair of switches is mechanical and the other pair are non-contact reed switches. I found out earlier that the product was purchased from National Instruments Co. Anyway we could receive some help with this?
Thanks,
Dustin Brown
-----Original Message-----
From: Susan Connors <[email protected]>
To: Bowlerdusty <[email protected]>
Sent: Tue, Feb 3, 2015 12:52 pm
Subject: Re: ACR 9000
Dustin,
I am checking with our manager and engineers on this and will let you know.
Regards,
Susan
Susan Connors
Customer Service Representative
Cross Company Automation Group - Employee Owned Since 1979
Direct Dial: 704-755-1048 Fax: 704-523-6500
[email protected]
www.cross-automation.com
Cross Automation Line Card
We welcome your feedback on our customer support team. Please email my manager: [email protected]
On Mon, Feb 2, 2015 at 3:10 PM, Bowlerdusty <[email protected]> wrote:
Could it possibly be under some other name? There are other divisions it could possible be under. This place is also under the U.S. Army Corps of Engineers, so it might be under that name. And if this wasn't purchased from this company, then where was it purchased from? This is the company I was sent to when I contacted the Parker Motion support.
-----Original Message-----
From: Susan Connors <[email protected]>
To: bowlerdusty <[email protected]>
Sent: Fri, Jan 30, 2015 4:13 pm
Subject: Fwd: ACR 9000
Hello,
We have checked and show no record of your company or this part being purchased from us, so this is not something that we can offer support.
I do not know of an integrator in your area but you should contact a local one that could possibly help you trouble-shoot any questions you have on this unit.
Regards,
Susan
Susan Connors
Customer Service Representative
Cross Company Automation Group - Employee Owned Since 1979
Direct Dial: 704-755-1048 Fax: 704-523-6500
[email protected]
www.cross-automation.com
Cross Automation Line Card
We welcome your feedback on our customer support team. Please email my manager: [email protected]
---------- Forwarded message ----------
From: Bowlerdusty <[email protected]>
Date: Fri, Jan 30, 2015 at 3:59 PM
Subject: Re: ACR 9000
To: [email protected]
Any idea of when I'll get a response?
-----Original Message-----
From: AG Sales Fax <[email protected]>
To: bowlerdusty <[email protected]>
Sent: Fri, Jan 30, 2015 11:03 am
Subject: Fwd: ACR 9000
-- Can you please advise Company name and location so I can forward to appropriate contact?
---------- Forwarded message ----------
From: 'Bowlerdusty' via [email protected] <[email protected]>
Date: Fri, Jan 30, 2015 at 10:32 AM
Subject: ACR 9000
To: [email protected]
I was told to contact you guys for help with this. Can you be of some assistance?
-----Original Message-----
From: jhoagland <[email protected]>
To: Bowlerdusty <[email protected]>
Sent: Thu, Jan 29, 2015 3:44 pm
Subject: Re: ACR9000
There are free training videos on our website:
http://www.parkermotion.com/products/Controllers__6934__30_32_80_567_29.html
This unit was purchased through Cross Automation.
They are your local Parker ATC distributor and can give you assistance though the unit is out of warranty.
Their phone number is: 704-523-2222
Let me know if there’s any questions. Have a nice day.
Regards,
Jonathan
-----Original Message-----
From: Bowlerdusty < [email protected]>
To: emn_applications < [email protected]>
Sent: Thu, Jan 29, 2015 2:57 pm
Subject: Fwd: ACR9000
Here is a pic of the serial number and model number.
-----Original Message-----
From: emn_applications < [email protected]>
To: Bowlerdusty < [email protected]>
Sent: Thu, Jan 29, 2015 11:36 am
Subject: Re: ACR9000
On the other side of the ACR9000 is a label with the model number, SO and
serial number. Please provide.
Regards,
Jonathan
Application Engineering Team
[email protected]
phone 800-358-9070 · international 1-707-584-7558
www.parkermotion.com
Parker Hannifin Corporation · Electromechanical Automation, NA
5500 Business Park Drive · Rohnert Park · CA · 94928
Bowlerdusty <[email protected]>
To
[email protected]
01/29/2015 09:19 AM
cc
Subject
Re: ACR9000
I honeslty don't know this information. This stuff was bought at least a
few years ago. A student who is now gone had put it together a while back.
There were a lot of binders with it for instructions but none of it was
very clear to me. I'm sending pictures with the parts I have
(controller,drive,motor,etc.).
-----Original Message-----
From: emn_applications <[email protected]>
To: Dustin Brown <[email protected]>
Sent: Wed, Jan 28, 2015 10:17 am
Subject: Re: ACR9000
OK. So now you'd program it using the Configuration Wizard in ACR-View and
the program editor.
Which Parker ATC distributor did you purchase this through?
Regards,
Jonathan
Application Engineering Team
[email protected]
phone 800-358-9070 · international 1-707-584-7558
www.parkermotion.com
Parker Hannifin Corporation · Electromechanical Automation, NA
5500 Business Park Drive · Rohnert Park · CA · 94928
Dustin Brown <[email protected]>
To
[email protected]"
01/28/2015 07:58 AM <
[email protected]>
cc
Subject
Re: ACR9000
Hi thanks for the reply. We got it connected via Ethernet now. We had to
change the IP address of "local area connection" on the computer to
192.168.10.1 for it to see the controller. So now that it is connecting to
the controller, it keeps saying that the drives are all disabled. I have
one drive connected to the controller in the Axis 0 port.
Sent from my iPhone
On Jan 27, 2015, at 3:56 PM, [email protected] wrote:
> Did you change your PC's IP address?
>
> VIDEO: How to set your PC's Ethernet IP address
>
http://www.parkermotion.com/dmxreadyv2/faqsmanager/faqsmanager.asp?category=116&knowledgebase=faqman...
>
>
> Default is 192.168.10.40
>
> Is this a new ACR9000?
> If you don't know the IP address and the default doesn't work, you'll
need
> to connect via USB or serial to get the IP address or reset it.
>
> Regards,
>
> Jonathan
>
> ________________________________________________________________________
> Application Engineering Team
> [email protected]
> phone 800-358-9070 · international 1-707-584-7558
> www.parkermotion.com
> Parker Hannifin Corporation · Electromechanical Automation, NA
> 5500 Business Park Drive · Rohnert Park · CA · 94928
>
>
>
>
>
>
>
> Bowlerdusty <[email protected]>
To
>
[email protected]
> 01/27/2015 01:48 PM
cc
>
>
Subject
> ACR9000
>
>
>
>
>
> I am having a little trouble getting a connection between the ACR view
> software and the ACR 9000. I am attempting to use an ethernet cable for
> the connection. Every time I press the "connect" button it says "Failed
> attempting to connect to controller". Do you have any advice?
>
> Thanks,
> Dustin Brown
>
>
>
>
(See attached file: IMG_0864.JPG)(See attached file: IMG_0865.JPG)(See
attached file: IMG_0866.JPG)(See attached file: IMG_0867.JPG)(See attached
file: IMG_0868.JPG)(See attached file: IMG_0869.JPG)
1 Attached Images
Solved!
Go to Solution.
Attachments:
image.jpg ‏938 KB
image.jpg ‏1570 KB
image.jpg ‏767 KB

Hi thanks for the reply. Yes I have used the ACR view to specify which inputs to use before. I used input 0 for the positive limit, input 1 for the negative limit, and input 2 for the home switch. However, when using ACR view the switch kept displaying that the switch had been tripped when nothing was pressing against it. I would also try pressing on the mechanical switch to see at least if the value would change but to no avail.
Attachments:
image1.JPG ‏1642 KB
image3 (1).JPG ‏3768 KB
image2 (1).JPG ‏3247 KB

Has anyone experienced there computer freezing up when useing Photoshop CS4 or SC5

My two computers both freeze up when I am useing Photoshop (working with a large file 82-120 megs with multiple layers, channels and paths) it only ocurred when useing Photoshop. Otherwise the computrs works fine for every day tasks for buseniss and personal use, admittedly, I do not have any other resource intnsive applications other then QuickBooks or maybe a large Excel spreadsheet but I have no problem with these large files. I am not a gamer or I could try a game I hear that they can be resorce intensive.
My first computer is used for personal and business. this computer has a number of programs on it, including Kaspersky internet security but it is not lacking in resorces, It is a Intel based computer, sporting Intel quad core 2.5 GHz CPU. running on a 32 bit Windows 7 operating system, its list of components are 4 gig ram, Nvidia Geforce 9600 GT graphics card (on the Adobe approval list sporting open GL) 4 sata hard drives, 750 watt power supply, Asus P5N-D SLI motherboard, the tower case has 7 fans and the CPU is water cooled.
I run Photoshop CS4 on this unit.
after I experienced this loss of critical files I call the tech support line to see if they could help with recovery of the file and to ask if they had a way to prevent this from occuring again.
They said that I could wave bye bye to the file and the work, additionaly they said if I was working with large files like that, I should be runing a 64 bit system that could utilize additional memory.
I really like working with the large files so I bit the bullet and spent the money for the 2nd computer that I would use as a dedicated Photoshop workstation.
the second system has many of the same components because they have worked admirably. the key difference is as followes. 8gig ram, 64 bit Windows 7 operating system, Photoshop CS5 and the only other software is the drivers for the wacom intos4 tablet. I desided not to install any type of antivirus program because I will not be useing it on the internet except when it needs to connect to Adobe for whatever. my decision not to install antivirus can be reversed but I did not want any questions about it slowing up the computer.
This system with Photoshop CS5, freezes up faster then the CS4 system.
When I say Freezes up what I am referring to is the mouse and keyboard will not respond. Control/alt/delete will not bring up the task manager. Eventually I give up and have to force a shut down by pushing and holding the case start button for about 5 to 8 seconds.
when I restart the system I check the file that I have been working and several times the file that I was working on is corrupted beyond Photoshops ability to open.
I have used the windows 7, on board, memory diagnostics and it claims that all of the memory is fine I have reviewed the event logs and the only critacal errors are about the system being improperly shuting down. I even went to the trouble to click on the link for each error that will take you to Microsofts website and will serch for anything they have about that event and they had no help on the event.
People with mac computers have had a similar problem that had to do with there fonts and plugins, but I do not have a mac and I have not installed any plugins. The CS5 is as it came from the factory and the Mac people kicked me out telling me to get over on my side of the street where the rest of the windows outcast are but that was only after they thought they had there problen solved. Its so funny, but losing these files is not, Please Help

Thanks everyone for jumping in with both feet.
Let me review what I have already done.
(1). I have already witnessed how the wround driver for the tablet will wrack havoc. when I first started the 64 bit version of CS5 it would not recognize any PSD files at all and if you went to the file and right clicked looking for the (open with) dialog box forget-about-it the option for Photoshop was not an option.
I called Adobe tech support and they told me that I was not going to be able to use the Wacom tablet with the 64 bit versionof Photoshop. I found that a little suspicious seeing how Wacom tablets are the most preferred pen tablets for professional illustrators.
I contacted Wacom and they explained that I needed to uninstall the Wacom tablet, reboot the computer, go to the website, download the new 64 bit drivers and then reinstall the tablet. after I did that. Photoshop found all of my files and opened just fine.It was only then that I found out about the freezing proplem with the 64 Bit version.
A number of the helpful people here have tried to advise this to me but I have already be down tha road.
(2). I have the latest drivers for the BFG Nvidia Geforce 9600 Gt, released in April of this year and I had already new that the were necessary for the open GL so this is one of the first things that I tried.
Some one from our cousin Mac's side of the famaly and (Noel just suggested) that I try turning off the open GL. As soon as cousin Mac asked us to try this I did it (Them being famaly and all).
I was able to give it a try on the 32 bit system on Thursday 7/8/2010.
I was able to work on a very large file with a multitude of layers, channels and paths for about 5 hours before if froze. after the reboot I found that the file was fine and retained everything up to my last save.
But this test is only good as circumstantial evidence because the freezes are somwhat random. They mosly happen after I have been working with a large file for quite some time but some times it can happen very quickly, maybe 25 or 30 minutes.
Bye the way I really enjoy the humor, the Mac people are very serious people.
the Mac users are just grouchy because they expect their computers to "just work", and of course they don't.
We PC users have been given no such expecatations. THANKS NOEL
Oh, don't worry about them mean old grumpy PC wanna be Mac peoples. Gota luv it THANKS dec9
and Eight thousand dollar papper weight says it all. THANKS $8000paperweight.
(3) the memory, CPU and mother board can not be ruled out completly, just yet
As for the memory I have used the on board windows 7 diagnostics and it passed. but this is a unreliable test for hevy-resource dependent applications and a load or stress test would need to be done to be confidend.
I have a number of computers with the same kind of ram but after swaping them around I can not say that I have had any lasting results and it is compecated by experiences like what happened to me after turning off the open GL. What if I had of only worked for 4 hours? I would of thought that the problem was solved thats what would of happened
Do any of you work with files like I have been talking about? and if so do you experience any problems?
The motherboard can not be rulled out by any tests that I know of other then process of elimination which is at the heart of all sound diagnostics.
I downloaded a utility that is helpful called (Cupid Z) that gives real time monitoring and idenification of components.All the voltages seem fine.A.
I hope I will be able to up load the screen shots so you all can have a look see.
The CPH is more than likely not the problem.
I do have the option to install Photoshop on a third computer that has most of the same components but has a different Intel CPU. this would rull out any compatability issues (CPU with the Board) but if that were the case I dought that every other progrem under the sun works fine except Photoshop.
dec9, I did delete the prefs on the 32bit system but I have not had time to test the operation of Photoshop as of yet.
Lastly I will try to upload the screen shots of (Cupid Z) you will see that the latencys and the frequency are correct. Under the SPDscreen the plausible timinigs for verious common frequencies are given,, all seem to be with in range. The lantency are inside the spec.given by Corsair;s website
Asus provides a utility that allows you to monitor Temptures and voltages and I hope to send you a screen shot of this and you can see that they all are correct.
I would like to send the event log but I am not sure how to do that if someone could give me the 411 on how to do this I will send them to you I have saved the errors in several file formats but I cant see how you cold read them on this little page Thanks again POBOX119 signing off

Problems creating a new folder when using webmail

Hi, has anyone else out there encountered problems when trying to create a new folder when using webmail ?
It just seems to create a new folder called 'New Folder' and misses out the step that would normally allow you to rename it to a title of your choice.
A whole list of folders called 'New Folder' is about as useful as an ashtray on a motorbike.
It did used to work as I've used it many times in the past.....but then so did a lot of things before the 'new' and 'improved' version of BT Mail came along.
Any help or suggestions gratefully received (apart from the obvious solution, switch to a mail client).
Maybe it needs flagging to the 'techies'......they must be really busy trying to sort out all the so called teething problems.
Solved!
Go to Solution.

What should happen is that when you click on the + for add a new folder a box should appear, somewhere amongst the folder list. (The list is in alphabetical order so if you have a number of folders previous to the letter N it maybe out of view ) .
The box will have the text " New folder-X," ( see below for the explantion for the -X ) you then delete the text, type in the name you want, hit enter and there it is.
If you don't notice the box, possibly because it's off screen further down the list, you then open and close the list, or log out the next time you view the list it, or they, are simply named New folder.
So you now have umpteen " New folders ", here's how to rename them.
Place your cursor on the word New Folder in your folder list, you will see a little box appear with" New folder-X," x being the number of the new folders you have created., eg -0, -1, -2 etc.
Then double click on it, you should then get a larger box with New folder-X.
Delete the text in the box, type in the name you want for the new folder, hit enter there's you newly named folder.

Airtunes drops when using Windows XP, but not Mac

We're currently using the AirPort Express as our wireless router, and everything works great from a connection standpoint. No problems with our MacPro or XP laptop.
However, when using XP to play AirTunes, the audio constantly drops out (itunes will pause, and then come back within a few seconds, green light on the APX stays lit). We've tried closing all other programs & processes, and even uploaded the 6.3 firmware for Windows, but still get the drop-outs. Never once had a problem with the Mac, even after the firmware change.
Also tried using a Linksys wireless router as our hub and connecting the APX to the network. same issues.
I haven't been able to find anything on the site about this, anybody else having this problem?
MacPro Mac OS X (10.4.9) Toshiba Laptop w/ Windows XP

I'm experiencing something similar.
I have a TECOM wireless router with a a single win XP PC connected and two airport express stations for playing music remotely.
Green light still on, but iTunes frequently loses sight of the remote speakers after some period of time.
The solution thats often works is to disconnect and reconnect XP to the wifi network. But I'm not really happy with this (boring) method.
If anyone knew a setting that could help...

Linksys E4200v1 is a little unstable when using torrent.

Similar Messages

Maybe you are looking for