Linksys WRTU54G-TM and Trendnet tew-631brp not playing nice together, HELP

Ok so, since getting the tmobile@home service I have been having nothing but issues with my setup.
My current config setup includes the Comcast Cable modem <to WAN port of> Trendnet tew-631brp <LAN to WAN port of> Linkysy WRTU54G-TM and the WRT set to bridged mode. WRT firewall disabled, Wifi Disabled, Main router is the Trendnet with Wifi-N enabled. No machines are hard wired to my routers, I use only the Wifi-N from my trendnet.
Now the internet works as expected, except when you go to use the VOIP phone. When you pick it up, the net connection drops out and the Trendnet router reboots.
I have tried making the WRT the main router and having the Trendnet be the secondary, I've turned firewalls off, I've added them each router to the DMZ and nothing nothing nothing will fix this issue. Does anyone have any idea what I'm doing wrong?

I just tried adding the WRT as the main router and the 631 as the secondary router, and it still won't work. Would the NAT cause an issue when it's set-up this way as well? This is so confusing.

Similar Messages

MacBook Pro and 27" Display not playing nice together

I'm having a rather strange problem with my Early 2011 MacBook Pro and my 27" Apple Display (Mini-Display port). They don't want to play nice together. The display will randomly/intermittently disconnect and turn black, then reconnect, sometimes after a second or so, but sometimes not for a good 10 seconds or more.
- My MBP works fine on other monitors (Thunderbolt 27", 24" LG via DVI adaptor).
- My wife's MBP works fine on this monitor.
- Had a tech look at the monitor, his MacBook works on it fine too.
- The combination of my MBP and this 27" Apple Display gives you the result shown in the video.
It happens quite frequently -- often enough to make working on this combination unbearable. But I have no clue as to what's going on here.
In "System Information" under "Graphics / Displays", the display not show up as connected to either the PCIe or Built-In graphics adapter when the 27" has turned black. When the screen is on, it shows up.
Here's a YouTube video of the symptoms.
http://www.youtube.com/watch?v=z0C50k0189I
I'm stumped. Does anyone have any ideas?

Your video shows the MacBook Pro display turning blue for a few seconds, several different times. This is an acknowledgement that a display is coming (or going).
Unencumbered by anything sensible, my diagnosis would be that you have a loose connection.
Mini DisplayPort cables can be diabolical. When inserting, you must make certain that essentially ALL of the metal end disappears inside the computer jack.

ARD and Time Machine don't play nice together

Hi there. Running 10.5.4 Server on a headless Mac Pro 8-core Xeon.
Thought i'd see how well time machine works as an incremental backup solution for my server. I use ARD to access the server. When i enter time machine using ARD i get some buggy glitchy version of time machine with no timeline or clear indication of where the controls are. Utterly unusable.
Any tips as to how to get these two magical pieces of software to play nice together?
in community,
~joel

Ahhhh -- so that's what's going on!
I have a Dual G5 Desktop that I'm connecting to, and it has worked perfectly -- except tonight.
I added about 1.6GB of data, and Time Machine has been spinning away!
Has anyone suggested how to get around this?
Stephen

IDevices Not Play Nice Together

I have an iPhone 4S, iPad 2, and a new (bought today) Apple TV.
I'm having trouble getting them to work with one another.
The iPhone & iPad arenot showing up in iTunes (Windows) even though I've attached me via the cable and check Sync Wirelessly.
The AppleTV is not showing up either in iTunes - Home Share is enabled on both iTunes (Windows) and the Apple TV. (as well as the iPhone and iPad)
I can get the AppleTV to connect to the iPad, but not the iPhone. AirPlay Mirror is not available via the iPad however.
I've gone through all of the Knowledge Base solutions I can find, and still unable to resolve any of the issues.
I'm out of ideas. Any Help giving is greatly appreciated.
Thank you,
iMaJorjaGirl

OK, I figured it out... I too have a dv6000 with Vista and I have been trying to fix this terrible itunes video playback thing and this is what I found. For whatever reason the NVidia driver in the dv series doesn't play nice with Vista. They say that they are looking into it but have no response other than that. Somehow the data from the hard drive isn't fast enough. So, reading this I figured that if that REALLY is the problem that I could use a external drive and have the videos come from there, and Voila!! It works like a charm, no skipping, no stalling, no more blue screens. I hope this is helpful, I know what a pain this can be.
Let me know if this works for everyone else.
Later
S

Vista & iTunes Do Not Play Nice Together

I was recently forced to upgrade to Vista due to a computer crash. I loaded iTunes ver.7.1.1.5 (latest) and all my music etc. from my backup drive. Everything worked fine until i tried to sync my 5G 80gig video iPod. Every time I connect it Vista blue screens and I have to reboot both. I've tried everything i can think of and I've searched forums all over the globe and everybody says the same thing, 'yep, it's a problem, but there is no fix'. I've heard that there is supposed to be an iPod update coming out, but I don't see how that will help me because as soon as I dock Vista crashes....ARGHHH!!! This is ridiculous. Both Microsoft and Apple had to know that this was a problem so why would they release Vista when it doesn't work with the largest digital music service in the world. In the mean time my iPod is empty and I'm developing a severe case of road rage having to listen to the jerks on the radio. Oh but wait, there’s more! The video playback through iTunes (and QuickTime) is unwatchable. It just freeze frames while the sound runs perfectly so now I am unable to watch the season finale of Heros. Okay, enough poor me. Does anybody know anything about either of these problems? I know I'm not alone. Any advice or just moral support would be great. I should have bought a Zune. Oh god I didn't just say that....that's blasphemy.

OK, I figured it out... I too have a dv6000 with Vista and I have been trying to fix this terrible itunes video playback thing and this is what I found. For whatever reason the NVidia driver in the dv series doesn't play nice with Vista. They say that they are looking into it but have no response other than that. Somehow the data from the hard drive isn't fast enough. So, reading this I figured that if that REALLY is the problem that I could use a external drive and have the videos come from there, and Voila!! It works like a charm, no skipping, no stalling, no more blue screens. I hope this is helpful, I know what a pain this can be.
Let me know if this works for everyone else.
Later
S

Garageband 10 and Digidesign 002 will not play nice...Please help!

Back Story:
I have a 2008 iMac with upgraded RAM. It has been working perfectly, er, IS working perfectly. No need to upgrade yet. I am running Mountain Lion, and ProTools 8 through a Digidesign 002rack. Everything is fat and happy.
One day a couple of months ago...I was happily plunking away doing whatever, and I get the prompt to upgrade to mavericks. I think to myself, this should be a good way to make sure my 5 year old computer looks and feels brand new. I run down the list o software I use thinking if there will be any compatibility issues...itunes, safari, firefox, word, excel...hmm, should be fine. so I upgrade.
Mavericks is great! Looks cool, has a few new features to sync with my ipad and iphone. Life is good.
I wake up in the middle of the night with a great song idea (usually the good stuff comes to me while I'm sleeping). I fire up the rig and...wait what? ProTools won't launch. I do a quick google and find that PT will not yet work with Mavericks. Ok, that's fine, I can wait until they fix that.
Few weeks later, I hear they've fixed it! Woohoo! Oh, hmm, Avid has only fixed it for the newest version of ProTools, PT11. That's $600. Ok, well, I have a decent job, I take great pride in my music, and it makes me happy...so...ok, I'll drop the 6 bills and upgrade to the new version of PT.
When on the Digi site, looking at compatibility...I see that my 2008 iMac with the intel core 2 duo processor will not work with PT11.
Hmm. Ok, now what? Downgrade back to Mountain Lion? Apple won't let you do that, and I do not have a time machine backup.
Last ditch attempt...I try to install my Snow Leopard operating system from a disc that I still have. Nope. Installer not compatible.
Argh. So now I'm saving for a new computer, so I can run the new version of ProTools...replacing a perfectly working machine for absolutely no reason. This is frustrating. Until I save the money (it probably makes sense at this point to wait until the newest 2014 iMac comes out in the fall...therefore futureproofing myself as much as possible), I figure I'm stuck with Garageband until then. So I download the newest version of GB, GB10 from the app store.
I fire up the 002, go to the preferences in GB and select the 002 for input/output, plug in the guitar and...nothing. no sound, no recognition of input. As a test, I throw in a drum loop, and no sound for output either.
I go into audio/midi utility, 002 is selected. My Digi core audio manager says the 002 is connected. If I change the GB preferences to "built in output," the drum loop comes through loud and clear.
I am so totally out of ideas, and so completely frustrated at my whole situation, that I am turning to the general public to help me for the first time ever. I am willing to try anything, in any configuration, to make my freakin' guitar plug into my freakin' computer and record whatever semblence of notes I am calling a song.
This should not be too much to ask given the thousands of dollars worth of equipment I have sitting on my desk.
AAAAARRRRRGGHHH!!! Please Help!
Ben

If you can help me, please write on easy english.

Captivate 4 and Blackboard Vista will not play nice

I have built online training modules for online literacy, CP4 is not doing a good job of initializing the gradebook and fails half the time. Any ideas? I can provide more details as needed. I have read through alot of documentation and made some tweaks but the problem persists.

Which settings do you use for Quiz (if any), reporting, Manifest? Have been using CP on BB since 6 years, not experienced those issues, but had to search for the right settings at the start.
Lilybiri

Safari and Flash & Adobe Reader not playing nice

I think I need to uninstall Safari 4 and start over. Flash and PDF viewing haven't been working since I installed the beta. Both work fine in Firefox so everything is installed.
A tad nervous about deleting anything important in the process. Anything I need to protect manually when I un-install Safari? Bookmarks etc?

No. Use the uninstaller that came with the Safari 4 dmg.
You may have a outdated version of FlashPlayer.Uninstall FlashPlayer. Install the newest version here.
Repair permissions after the update.
Also check Adobe Reader's preference>internet pane and make sure that you don't have 'Open pdf's with Reader' ticked.

HT6030 Mavericks 10.9.1 and Gmail still don't play well together: help!

I have 4 gmail acounts and Mavericks and iOS 7 still don't get along despite having the latest versions of everything.
Mail deleted one place still shows up in another.
Counts are totally wrong between my MacAir my iMac and my iPad and iPhone and appear totally random.
At times mail won't show up on the iMac or MacAir for days or even weeks when there may be hundreds of messages that show up in my web browser and sometimes on the iPhone and iPad, but it seems totally arbitrary and to make no sense when it does one thing or the other.
I have no custom settings on gmail, nothing strange, just use it in the most basic ways there are.
Anyone else still having this problem and what to do about it? It is no better from 10.9 to 10.9.1, and has been causing problems since the moment Mavericks was installed.
Come on, Apple! You have a $100 billion in the back: hire people who can code a mail program or talk with the people who coded Mail for Mountain Lion, as it worked just fine.

10.8 worked well with my Mac Mini (2009) connected to IOGEAR KVM model GCS1108. My mouse is from Redmond and the keyboard is a Goldtouch.
Mavericks has a problem with my KVM switch as well. It seems to be a USB problem.
Case 1: The Mini's video is connected to the KVM switch -- mini DVI port to DVI. If the KVM USB cable (known good) is connected, the Mini chimes at boot but no grey Apple logo appears. LCD remains blank white. Boot does not progress.
Case 2: The Mini's video is connected to the KVM switch, as before. If the KVM USB cable is NOT connected, the Mini chimes at boot, the grey logo appears, and boot proceeds normally. Video is fine. I then connect the KVM USB cable to the Mini and use keyboard and mouse. KVM switching works as expected.
If the KVM USB cable is NOT connected but a keyboard and mouse are connected directly to the Mini, the boot sequence is normal. Video works.
The problem is not the hardware, all of which worked well with 10.8 (Mountain Lion). I would downgrade if Apple made 10.8 available from the App Store.

M-audio 410 and Soundtrack Pro won't "PLAY NICE" together!!

I can't get any output to my Firewire 410 from Soundtrack Pro. The input works but no output. I tried every setting with not one db of output. The most recent was not looping through another firewire device, but to go straight into my G5.
Does anyone have this device working on your mac?
Please help if you can,
JCB123

I have the same setup and haven't had any problems. I am connected by firewire. In STP, my input device and my monitor are set to Firewire 410. In System Prefernces / Sound, I have both my input and output set to Firewire 410 as well. And in the M-Audio Firewire 410 audio interface software under the Mixer Tab, I have spdif highlighted under Analog In. Then under the Output Tab I have Main highlighted under SPDIF OUT.
I run an optical cable from the 410 to a hometheatre system right now but have a proper set of audio monitors on the way. I intend to plug them into outputs 1&2 in which case I will also highlight 1/2 under ANALOG IN under the MIXER tab and highlight MAIN under 1/2 OUT under the OUTPUT tab.
Hope this helps a bit. I am still new to this but so far have been able to get this far. Good luck!

Windows 7, Forms Runtime 6i and Discoverer 10g don't play nice together

Hi -
I posted this under the Discoverer Forum, but it was suggested that this might be a better place.
Let's see if I can have this make sense:
We are testing 3 Oracle products on a Windows 7 64-bit machine.
1. Forms Runtime 6i
2. Discoverer 10g version 10.1.2.3
3. ODBC from Ora client 11
I can install everything; although I had to install Discoverer in Compatablilty Mode using XP SP2. The ODBC client requires that I change the environment varialbes and add a New Environment variable called TNS_ADMIN.
Forms 6i works and the ODBC work until I install Discoverer. After installing Discoverer, I get a TNS cannont resolve.......on the Forms Runtime.
I'm lost as to how to get the Forms 6i to work. If you need any more information, please ask and I'll try to answer.
Thanks for all your help.

OK - so I thought the original post was from May of 2011 and wrote up my entire response accordingly. Only at the very end did I see that the original post was from May of 2010. Hopefully my response will help others who are only now trying to work through this issue.
Although Developer 6i is not officially supported by Oracle on Windows 7, it can run. It is just a bit finnicky to figure out.
There are a few of other things to I'd like to mention.
#1 Because you are running on a 64-bit OS, and depending on the Oracle 6i patch level you are running on the machine (we use Patch 17), you will need to replace two DLL files in the <ORA6i_HOME_DIR>\bin folder with version from 1/2/2001 (Patch 4, I think)
1. NN60.DLL
2. NNB60.DLL
If you do not replce these files, you will get an "FORM ERROR FRM-41211 Integration Error: SSL failure running another product" if you try to run a report from within your forms application, or if you try to open a form in a new window. The newer versions of these files apparently had removed some 64-bit calls when 64-bit Windows XP flopped.
More information (and my original source for my solution) can be found here: http://halimdba.blogspot.com/2009/05/oracle-forms-or-reports-6i-in-windows.html
#2 Because you are running on a 64-bit OS, if you want to add the TNS_ADMIN variable to your registry, you should add it in two places. HKLM\Software\Oracle AND HKLM\Software\Wow6432Node\Oracle
#3 During installation, I have a batch file that performs a lot of the 6i install stuff, so I don't run in compatability mode. But what I do is open a command prompt using "Run As Administrator" then browse to the 6i installers and install from that admin environment. If you are creating packaged forms 6i applications, I would strongly suggest investing the time to figure out how to script the 6i install for you clients. It can be a pain, but it is certainly much better than having to remember a gazillion different steps and make sure that you selec the approrpiate packages every time. The certainly don't need the full 6i environment, only the runtime portions.
#4 When installing multiple versions of oracle client, we've always found it best to start with the oldest version first. Get it running and tested, then move to the next version. Test the new version, then the old, then change the old to work with the new. Rinse and repeat. Of course, this is not required and may be impossible (installing your 6i app on machines that have been running 10g for years where you don't want to have to reimage the machine), but that order is definitely helpful in determine those steps that must be taken to get all versions working at the same time.

I just updated itunes and now it will not play any of my music. What is wrong?

I just updated to the new version of itunes and now it will not play any of my music. It says that it is playing but nothing happens.

Hi ryanmar,
If you are having issues with audio playback in iTunes for Windows, you may find the following article helpful:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Regards,
- Brenden

When i install the new os my fcp,motion and many adobe software not working so please help me out.

when i install the new os my fcp,motion and many adobe software not working so please help me out.
there are so many videos on youtube but i want know any solution from apple side plz my so many works are pending becuze i am working as Video Editor.

You need to be more specific about which software applications you're using, the versions and what happens when you try to open them.
It would also be nice if you could include which model MacBook Air you're using.
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

I have recently purchased a CD and some tracks do not play the whole way through. Why?

I have recently purchased a CD and some tracks do not play the whole way through. Why?

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If you don't see them straight away it may help to close and restart iTunes.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

Installed Plugins and Checked Settings Still not playing Videos on Safari

Hello,
     I installed java and a dish tv plugin to watch videos and still shows the same page that they haven't been installed. I checked safari settings everythings good. Checked computer and everything is installed. Why is it not playing? Any help would be appreciated!
Thanks,
     Ryan

If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 4.
1. If you're getting a "blocked plug-in" error, then from the menu bar select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch your browser.
2. Triple-click the line below to select it:
/Library/Internet Plug-Ins
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu. A folder should open. Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
3. Re-download and reinstall Flash. Download it from this page:
Adobe - Install Adobe Flash Player
Never download a Flash update from anywhere else.
4. If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked Enable plug-ins.
5. Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
6. In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.

Linksys WRTU54G-TM and Trendnet tew-631brp not playing nice together, HELP

Similar Messages

Maybe you are looking for