Lion on 2 computers but not MBP, what happens to Cloud?

I have 2 iMacs both of which are now loaded with Lion, but I have not moved data to Cloud yet. I just realized my MBP with Intel Core Duo will not run (load) Lion. So If I go to cloud with my 2 lion computers, what happens to my MBP and SnoLeopard ? Does mail, address book, iCal stil sync with other computers that are in the cloud? Or do I have to buy a new computer to have all Lion to have everything sync like they do now (extremely important to continue that)
roger

you need at least Core 2 Duo, not Core Dou, and I tried to load it and it told me it would not on my computer.
but here is what I was getting at,
If I stay with SL on my MBP (because I cannot upgrade to Lion on that computer) and it  stores mail, address book, iCal etc info somewhere in cyberspace through Mobile me,
But on my other 2 iMac computers that are on Lion now, and I go to the Could on those 2 computers, and Lion will sync stuff through the Cloud, I am concerned that my info (mail, address book iCal etc) will be stored somewhere else in cyberspace and if they (mobile me data and Lion data) don't sync themselves, I will have 2 different address books, iCal etc sets of data for example out there and my iMac wont syncwith MBP and visa versa.
This must be a common issue as people have mixtures of SL/Mobile me and Lion/Cloud.
Maybe I dont understand how the Cloud works
roger

Similar Messages

  • My iPhone cannot check the balance and showing "CHECKING BALANCE MOBILE" but not process, what happened and what an i do?

    My iPhone cannot check the balance and showing "CHECKING BALANCE MOBILE" but not process, what happened and what an i do?

    If the computer iTunes is signed into the same account then contact iTunes:
    How to report/refund an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase

  • How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

    I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
    have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

    Jay del Rosario wrote:
    >
    > How do I troubleshoot installation/distribution of a LabVIEW .exe
    > which processes data using Matlab when it works on some computers but
    > not others?
    Poke around zone.ni.com and
    http://digital.natinst.com/public.nsf/$$Search/ .
    Good luck, Mark

  • Sharepoint Foundation - search working for some users (or computers), but not others

    Hi all,
    We have doozy of a search problem with SharePoint Foundation 2010 that I'm hoping someone can help with.
    We have an application that is listening on port 14197 and search is working just fine, but only for one or two users.
    If I do a search while logged in using the account we set the application up with then the search works fine and it returns records as expected.
    If I use a different account - one that has full control over the app, then the exact same search fails with the following message:
    We did not find any results for 06BSL.
    Suggestions:
    Ensure words are spelled correctly.
    Try using synonyms or related searches.
    Try broadening your search by searching from a different site.
    Additional resources:
    Get additional search tips by visiting Search Help
    If you cannot find a page that you know exists, contact your administrator.
    We've done everything we can think of, including several procedures to create new search accounts, replace databases, etc.
    Nothing has helped and all of the info we can find online is in relation to getting search working when it doesn't work at all.  In our case it is working, but only for some users.  We thought it might have been a permissions issue, but not matter
    what permissions we seem to give to test accounts they still don't work.  We've set up a test account, for example, that is a member of the 'application owners' group, but cannot produce any search results with it.
    The SharePoint Foundation server is running on Windows 2008 Server Foundation, with a separate SBS 2003 DC.  
    Any help most appreciated.

    Hi Alex, thanks for your response and apologies about the late reply - didn't realise someone had responded until now!
    Agreed that this looks like a permissions issue, but we're stumped as to what it could be.  The 'test' account displays this problem - if we try and search on 06BSL
    we get no results, but it does appear that this account has full control over this document (see below).
    Note that the 'Manage Permissions' page presents a comment 'This list item inherits permissions from its parent. (Customer QA & Product Management)' which is what we're
    expecting.
    The indexing schedule is set to 5 minutes. 
    Appreciate your help with this, as we've spent a huge amount of time on this problem but don't seem to be any closer to a resolution.
    Cheers,
    Damian
    Check permissions result (this result is the same for the list or for the document itself):
    Permission levels given to test (DOMAIN\test)
    Full Control
    Given through the "QA Application Owners" group.
    Design, Contribute, Read
    Given through the "QA Application Members" group. 

  • I have a problem that I try to turn on the iPad 2, but he was just lighting up, but nothing is displayed. I do not know what happened, but yesterday did not do this. Thank you for your help.

    I have a problem that I try to turn on the iPad 2, but he was just lighting up, but nothing is displayed. I do not know what happened, but yesterday did not do this. Thank you for your help.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Having difficulty -- via airplay -- w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???

    having difficulty - via airplay --w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???

    What site are you trying to watch?  I just tested 3.  The you tube app streams from the pad to apple tv fine, as long as the source video format is ok.  Checked a site called funny or die.com. Most of the videosmthere stream to apple tv fine.  A few have a different format, and do audio only.  Netflix does not stream at all, but you can get to netflix directly from apple tv.  Whether or not it streams is directly related to the format of the video.  Some do, some dont.

  • Before partition by Boot Camp on Mac Book Pro With Mac OS Lion the computer restarts but not open wizard of Windows 7 and appears the apple with question mark...

    Before partition by Boot Camp on Mac Book Pro With Mac OS Lion the computer restarts but not open wizard of Windows 7 install and appears the apple with question mark...don't recognize disk..

    Apparently Zoo Tycoon can't be played on anything newer than 10.7.
    https://discussions.apple.com/message/21885910#21885910
    Roller Coaster Tycoon is available for purchase from the App Store.

  • I am using os x 10.4.11 on a 2.4 ghz intel core 2 duo.  I don't believe I can install lion on this system but was wondering what is the highest version I can use?

    I am using os x 10.4.11 on a 2.4 ghz intel core 2 duo.  I don't believe I can install lion on this system but was wondering what is the highest version I can use?

    Here are the requirements for Lion:
    http://osxdaily.com/2011/06/07/mac-os-x-10-7-lion-system-requirements/
    In order to install Lion you have to have Snow Leopard and then update to 10.6.8:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Personally I suggest that you stop at Snow Leopard.  It still is the most efficient OS that Apple has devised and it still works great.  Go to the Lions only if there are feature that you really need.  There may be a price to pay in slower performance though.
    Ciao.

  • TS1347 birthdays show up on my 4s phone calendar but not anniversaries - what am I doing wrong?

    birthdays show up on my 4s phone calendar but not anniversaries - what am I doing wrong?

    Anniversaries are not available as a calendar item in the same way birthdays are. You would need to create a specific calendar and add those manually.

  • I have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

    i have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

    i have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

  • I try download for premier pro and after affects but says page not found what happens?

    I try download for premier pro and after affects but says page not found what happens?

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I deleted my events in iPhoto Help?  The "events" are not in the trash.  I did download stellar phoenix recovery but not sure what to do

    i deleted my events in iPhoto Help?  The "events" are not in the trash.  I did download stellar phoenix recovery but not sure what to do

    i deleted my events in iPhoto Help?
    You deleted them in iPhoto on your Mac?
    If you do not have a backup of your iPhoto library, run the recovery program you downloaded, then reimport the folder with recovered photos into iPhoto.
    You will probably have to weed out plenty of seemingly duplicates (thumbnails, previews, and original files), since the program will not be able to reconstruct your events, only find image files.

  • Why does CD burned as "audio" only play in computers but not car?

    I've done all the troubleshooting steps but to no avail. My CDs burned from iTunes play in computers but not in cars. Help!

    Some car stereos can't handle anything other than commercially pressed CDs. I find that burned CDs have a limited playable lifespan for my car and have been told by my dealership that the stereo is not rated to play CD-R discs (but that hasn't stopped me). There's something about the fact that home burned CDs are dye-based whereas commercially burned CDs have more of a metal layer abalated write done that makes them more reliable to read.
    You might have to look into replacing your stereo with one that can handle CD-Rs. Crutchfield is a good place to research them and the included install kits are great.

  • Not sure what happened I down loaded lion and now at the bottom I can see the lio logo and it says paused does anyone know what went wrong or what that means

    not sure what happened I down loaded lion and now at the bottom I can see the lio logo and it says paused does anyone know what went wrong or what that means

    http://support.apple.com/kb/HT4485 here, this should help

  • My ipod connects with other computers but not mine.

    my ipod connects with other computers but not mine.

    Start here:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPod: Does not appear in Windows or iTunes and Device Manager is empty
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Maybe you are looking for