LIS (Report: MCTE) is not getting updated

Dear All,
We have created a New Profit/ Cost Center and then created a Substitution Rule, based up on Sales Org+Dist ChnlDivision+Sales Office_
Then we have created delivery and then Invoicing. Accounting Document has been generated and G/L A/Cs have been hit, accordingly.
Now, when we refer to Standard Report: MCTE, (for above said Sales Area), Report shows No data for chosen criteria.
Here, I would like to mention that all required configuration for LIS Updation,
SPRO --> IMG --> Logistics-General --> LIS --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Update Group
--> Assign Update Group at Item Level
--> Assign Update Group at Header Level
have already been maintained before Sales Order Creation.
Moreover, the same config-settings is working fine at our Quality-Server, whereas, Its not working on to PRD-Server.
Couls anybody suggest, some more checks to perform?
Best Regards,
Amit

Hi Amit,
When you moved your changes to Production Server and then after you have created a document for the above mentioned Sales Area. Now is this document also not coming up in the Report?
If yes then can you please tell me what value has got Updated in the Database Table both at Header and Item level in the Field Update group.?
Madhukar.

Similar Messages

Values are not getting updated in sales report

I have configured sales information system, and i have been trying to run sales report but values are not getting updated in sales report, System will through message that no data exists.
regards,
thooyavan

Hi,
Please check with the Customer and Material Statistics group in the Customer and material master respectively.
Further check with the LIS settings (Sales Area combination with the Update group).
Reward points if this helps you.
Regards,
Harsh

544 Movement ,Qty & value is not getting updated in MC.9

Dear friends,
MC.9 & MB5b report is showing difference in Qty & Value.In my analysis i came to know that 544 movement is not getting updated in MC.9. I also Checked the Statistically relev. key as 2 and Consumption posting G in OMJJ.
I require the info about MC.9 configuration or any info related to this.

Hi,
Please refer SAP note 581240 for this.
For these stocks you have three valuation types for selection:
' ' = no inventory valuation
'A' valuation = without reference to sales document ('make-to-stock
inventory')
'M' = separate valuation with reference to the sales and distribution
document/project
ONLY stock/stock movements with special stock valuation 'A'
(make-to-stock inventory) are updated in Inventory Controlling.
Thus, if you find a document which is not updated in the info structures
of Inventory Controlling (S031-S039) and you require this, check the
corresponding documents in the materials management tables. You can find
the special stock indicator and indicator of the valuation of the
special stock, for example, in document segment table MSEG in the
following fields:
MSEG-SOBKZ = Special Stock Indicator
MSEG-KZBWS = Indicator: Special Stock Valuation
Only A type (make to stock ) are updated in the info structures.
Hoping this helps.
Regards,
Rajesh.

TDS amount not getting updated in the table under the field QBSHB

Dear Friends,
The TDS amount entered while booking the vendor invoices through MIRO T-cde, is not getting updated in the table BSEG under the field QBSHB.
Kindly let me know the reason for the same and guide me to correct it
TIA.
Regards,
Vincent

HI Vincent,
Bseg-QBSHB field is relavent for classic WT.
I hope you are using the EWT.
Hence if you post a document through MIRO it will not update
(but if you post document FB60 it will update but wrongly).
Reason is Miro document is posted through interface.
Hence SAP is suggested to not refer the Bseg-QBSHB and etc., fields.
refer only with_item table.
Please refer the below replay from SAP
Please refer the below note .363309
Please review attached note 363309 for detailed explanation
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax' button."
(BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) field is not relavent for
Extended withholding tax and not suppose to use in report FBL1N.
It basically does not make any sense to use the withholding tax fields
of the document line items (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) with the
activated extended withholding tax.
regards
Madhu M
Edited by: M Madhu on Jan 31, 2011 1:19 PM

Not getting updating in a table....

Hi friends,
Currently i working on integration of apex with ebs R12.....And i have successfully integrated following the rod west document....
I created one DB application in my sample schema that is associated with apex 4.0.....
Application details:
*) login page(where i will be giving username and password)
*) page 1 (consist of several form fields, like
--->name:
--->module:
--->projects:
----->email:
the above are the fields, if i put any entries in the above field means, it will get automatically inserting in the report column, which is also in the same page consist of the above fields in the table manner...
since this report table consist of an edit icon in front, if i clicked the edit icon of an one row means, it will go to another page..
*) i.e. page 3(consist of the same fields with entries in it automatically corresponding to the each and every row, suppose if i want to update any changes means i can update in it....
this is my application that i developed it is working well with in the sample schema apex 4.0..
What i did is i created a new workspace with APPS schema in it...and i have imported my application that i developed in sample schema to APPS schema....
Since after importing to APPS schema...when i tried to open the application, it is not showing any datas in it...That is due to the tables that are supporting the application is not in APPS schema, so what i did is i have given grant privilege to the respective tables and also i have created a synonym for accessing the table in APPS schema for supporting the application.....
Now if i tried to put any entries in the form in page 2, it is getting inserting in the report column which is also in the page2....
But my problem starts here, if i clicked the edit icon symbol in each and every row of the report column it is going to the page 3 which has a respective form fields, but it is not showing any entries in it automatically, and if i tried to put any entry in it, it is not getting updating in the report table......
why this problem occurred for my application in APPS schema....But my application works very well within the sample schema......why it is not showing any entries in the form automatically soon after i clicked the edit icon in each and every row.....
i couldn't know what is the real problem behind this..... help me friends,
Thanks in Advance..
Regards,
Harry...

Goodmorning,
Have you had a look for notes, Depending on the release and industry sollution you can find several notes on this subject (start looking for message RW 022).
Annemarie de Bruijn

Backened documents are not getting updated in Classic Scenario

Hi,
We are using SRM 7.0 version and we are working on classic scenario where the shopping cart - RFX - Contract are created in SRM and the PO - GR - IR are created in ECC. The blackened documents which are created in ECC PO - GR and IR these documents are not getting updated in SRM system.
Is there any business functions to be activated.

Hi Sunil,
You manually run report ""BBP_GET_STATUS_2" after PO is created in MM. Then check if the follow-on-docs are updated in SC.
If it is working fine after you manully run report, you will have to properly set time to run this report automatically.
Best Regards,
Anu
Edited by: Anuradha UG on May 18, 2010 8:09 PM

Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

Hiiii,
In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
Best Regards,
Sridhar . P

Dear Heagal,
I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
2. Removed Credit groups for Delivery Type.
3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
Best Regards,
Sridhar

Picked quantity not getting updated in ERP outbound delivery

Hi All,
I have an outbound delivery which is replicated from ERP to EWM. I have confirmed the Warehouse task for picking & completed PGI in EWM system. The status update has taken place in ERP delivery (i.e ERP delivery status shows that goods movement is complete and the distribution status shows processing of the delivery in the decentralized system is complete). However the picked quantity (LIPS-PIKMG) is not getting updated in the ERP delivery. How do i make this happen?
Regards,
Smitha Pai

Hi Smitha
Picked Qty in ECC will never get updated when do the PGI in EWM. I think, this field is not designed when delivery is distributed as system assume picking will be done in other system in this case it is EWM.
But You can always refer VBFA (Document flow table) to identify the picked quantity if you are working z report or interface to send this information.
Thanks,
Jagdeep

Quantity field not getting update in PCA document for Goods Receipt

We have the Purchase Account activated for our company code.
For movement type 101 (Goods Receipt), I am getting the quantity field updated for GR/IR account and Stock Account (B/S item).
But the quantity field is not getting updated for the "Purchase Account" and the "other offsetting PL A/C).
Please advice whether I am missing something.
Regards
B.Mohanty

Hi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando

Master Data is not Getting Updated Properly.

Dear Expert,
I am trying to pull the data by Info package but The text is not getting updated.
The Master data object is 0BPARTNER . To update this Master data , we ghave 2 info packages
0BPARTNER_ATTR and 0BPARTNER_TEXT. But the text is not getting updated ( like the fiels E-mail address, Address 1, Address 2, Address 3, Address 4,.... Phone No,Etc.
What could be the Reason for this and How can I solve this issue ?
Tahnks,
Utpal

Hi,
Could you please check the data in RSA3.
If everything is there in R/3 side.Then,please check are you giving any
condition in the infopackage .
Please run the infopackage without giving any condition.
Thanks,
Saveen Kumar

Tax is not getting updated in Sales Order Pricing Conditions

Hi ,
Tax is not getting updated in Condition of sales order when creating Sales order but when we click on update button it is calculating correctly.
Following are the changes for in the standard Pricing:
1) Created ZPSC condition type to calculate the sur-charge from Z-table
2) ZPR0 Condition type to calculate the sum of PR00 and ZPSC
So tax has to be calculated based on the ZPSC value, but it is calculating the tax based on the PR00 base price.
We implemented the logic for updating values of Amount and condition values for ZPSC and ZPR0 by creating custom Routine 904 in Calculation types and assigned the routine in Pricing Procedure.The correct values are coming till NET VALUE 3 but tax is calculating based on the PR00 net price.
I debugged the code for Tax Routine the value for Net value (NETWR) is the base value price but displaying correctly in Net value screen of Conditions tab.
Please suggest how to update the Tax values correctly without manual update.
Thanks ,
Rajesh Sanapala.

Hi Lakshmi,
I am using a TAXINN procedure.....to correct my self can u brief me abt the CIN configuration settings required from SD point of view......how many tax codes have to be maintained for capturing the BED,EDCess,SHED cess,VAT,CST and what are the condition types required for capturing the same.....
I am using JEXQ-A/R BED ......for capturing the BED....and so on ......I feel that i have missed out on some settings ,thats why few conditions are getting captured and some are not.....It would be great if you ca nhelp me on this.
Thanks
Ivy

Data is not getting updated in CRM

HI experts,
I am updating the new address and postal codes in ISU.And now if I check these address for buisness partner in CRM. Its not getting updated.
why this is happening?
Is there any BDOC used in this case then how we can check that BDOC?
Thanks,
Jassi

Hello
I am sure that the problem occurs due to this.
You need to know the error message. To do this:
1) Choose any red document from transaction SMW01
2) Click on button "Show BDoc message errors/receivers" (9th button from the left)
3) In the opening window there is a button "Errors". There is where you can find the error message.
I hope it helps. Please, provide points if helpful.
Joaquin

Data is not getting updated in table using RFC

Hi Experts,
In my scenario, I am calling one RFC using RFC receiver channel. After running scenario, channel is showing status that RFC executed successfully. But when I am checking tables in R/3 system, data is not getting updated.
Moreover , when we tried to execute the RFC manually in R/3 system, that time data uploaded into table successfully.
Could anybody tell me what would the reason that data not uploading into table when we send it through XI.
Regards,
Sari

HI Sari,
as you have scenario with RFC receiver.. and as you mentioned that it not updating tables when run through PI but when you execute RFC manually tables got updates.. then following are the options you can check..
-- if you check RFC communication channel and if everything ok on then.. this means that your RFC is getting triggered successfully..but as you said tables are not updated.. for this you can go to SXMB_MONI and check the log take payload after mapping.. and compare it with the input when you try to execute it manually.. I think the input when you try manually and input to RFC when you try through PI is different and that is causing the Problem.. you will be able to see the difference in input then check.. I think the problem is data and not RFC communication channel..so by using this you will come to know difference
-- else if possible configure your ID in PI in RFC Receiver and then check and put breakpoint on ABAP side.. so that when PI will hit RFC you will get it in debug mode and able to see what is going wrong..
Thanks,
Bhupesh

The currency is not getting updated in the table VBAP

Hi ,
The currency is not getting updated in the table VBAP. The currency was suppossed to be copied from the header table VBAK for a Sales Order. When the user creating a Sales Order the currency WAERK is not shown in VBAP table. VBAK-WAERk is in EUR . Does anyone know why is this happenning?
Currency is maintained in the Customer Master, Material Master and Sales Org. Any suggestions?.
Also it is happened for only one line item in a set of line items , Other line items did display the currency field.
The net Value has data in it .
The system is ECC 5.0
Regards,
Senthil

Dear Senthil,
Please apply the following notes (if they apply to your support pack level) and retest:
1460621 VBAP-WAERK is deleted after the sold-to party is changed
1426441 VBAP-WAERK deleted for subitems
1493998 VBAP-WAERK deleted for subitems
This should resolve the issue. I hope this helps.
Best regards,
Ian Kehoe

Data is not getting updated in DB table

hi all
i am doing IDOC to jdbc scenario
i am triggering idoc from R/3 and the data is going into DB table
sender side:       ZVendorIdoc
receiver side:
DT_testVendor
Table
    tblVendor
      action       UPDATE_INSERT
      access      1:unbounded
        cVendorName 1
        cVendorCode 1
     fromdate    1
     todate      1
      Key
        cVendorName 1
if i trigger idoc for example vendor 2005,2006 and 2010 data is getting updated in the table
but again if i trigger idoc for same vendor nos data does not get updated in DB table while message is successfull in moni and RWB both
plz suggest if any change need to be done to update the data
Regards
sandeep sharma

Hi Ravi
you are right, vendor no is my key field . problem is when i send data again then it should Update the data but it's not updating the data again
i did on exp with this : i deleted all the record from the table and then triggered idoc for vendor 2005 , 2006,2010 after this data is updated in the table i deleted the rows for vendor no 2006 and 2010 and kept the row for vendor 2005
then i again trigered the idoc for vendor no 2005,2006 and 2010 now this should update and it should insert rows for vendor no 2006 and 2010 but i am surprised its not updating the data
Thanks
sandeep

LIS (Report: MCTE) is not getting updated

Similar Messages

Maybe you are looking for