LIS S001

Hello Experts
i am facing a problem when i am generating S001 in LBW0. when i say generate i am getting error 040 The LIS environment is setup incorrectly. Then when i selected the option SET UP ENVIRONMENT and generated i am getting error saying (error 008 LIS Environment: Generation not possible in SAP Name range). can anyone please help me to generate S001. Thanks

Hi,
I hope, the foolowing link will help you to sort out this problem.
Re: Lis Environment
With rgds,
Anil Kumar Sharma . P

Similar Messages

LIS S001 updating

Hi,
The new documents are getting updated in table s001 but not into tables s001bw1 and s001bw2. Also while updating its giving updating error but the doc is saved in table s001. Can any 1 tell me in depth abt those 2 tables...how r they populated and the rules to update them and where can b problem while document posting.
Thanks
Prashant

hi
Asynchronous updating will update those tables only when the system resource is rarely used..that is night time.............only synchronous update will update those tables immediately...that is the reason for not updating those tables...might be after few hours or later it may updated
Regards
N Ganesh

Errors in IDOC transfer method.....

Hi
I am loading customer data ( LIS , S001) by using transfer method as IDOC. now i got 4 error records. so how do we rectify in IDOC method. i can use PSA also, so that its very easy to rectify errors. But how do we rectify the error records in IDOC method...., any idea gurus......,
Regards
swetha

Looks to me like you're not telling the linker to create a library (DLL). I'm not familiar with Linux, but clearly if the linker if looking for 'main' then its trying to build an executable.

Error While loading data for LIS InfoSources.

Hi All,
I am repeatedly receiving load failure errors while loading data using 2lis_01_s001 (This is the case with all the InfoSources).
The error message is:
An error occurred in the source system.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
in our Quality system, we disabled the LIS Updation to No Update(R3) and loaded data and then again changed the Update Mode for No Updating to Asynchronous Update(R3). But now we are doing dataloading in Production. How to proceed. Should we have to disable the LIS Updating whenever we have to load the loads from R3 to BW.
Regards
Jay

Hi Jayanthy,
Pls. check the order of the fields in the two set up tables for the S001 structure. The order of fields in both the tables should be the same.
You can see the structure in the TCode - SE11.
If the order is different, then you bneed to ask the BASIS person to change the order so that the order of fields in both the setup tables is same. This should fix the issue.
Thanks,
Raj

Problem with S001 - Key field Sequence in table

Hi,
We want to use the extractor 2LIS_01_S001 with Delta. But delta is not working with these extractor. When I checked LBW0, I am getting error "The LIS environment is setup incorrectly".
According to note 115192, the key fields in tables S001, S001BIW1 and S001BIW2 have to be in the same sequence.
But we are on 4.7 with following Support Packs:
SAP_APPL 470 0025 SAPKH47025 Logistics and Accounting
PI 2004_1_470 0007 SAPKIPZI57 R/3 Plug-In (PI) 2004.1 for
R/3 Enterpri
PI_BASIS 2004_1_620 0010 SAPKIPYI5A Basis Plug-In
(PI_BASIS) 2004_1_620
And according to this note, solution is delivered with this Support Packs.
Can you please tell me that if this note is mandatory for all the releases..?
Did any one encounter this issue before..?
Thanks & Regards,
Samay Mehta

I changed my entity: unchecked the X column to be primary key added RowID as a primary key. Now it works.
What's wrong with my CHAR(1) as a primary key ?
I also tried to add a Refresh button:
<af:commandButton text="Refresh" id="cb3"/>and in the table add a partialTarget to the button. Now when I add new row and press the Refresh button - then it works.
So it seems that the problem is when I add new row and enter data, the table is not refreshed and the row is missing it's primary key.
Any solutions?
Edited by: a.gruev on Nov 26, 2009 4:18 PM

KZWI6 into LIS

Hello all,
i've been searching into the forum for solutions to my problem, but i've found nothing. I will explain my question:
I have one pricing procedure with one condition type that goes to sub-total KZWI6. This is OK. But now, i want to add this sub-total to my logisitic information system (LIS).
I have made one field catalog with the fields MCVBAP-KZWI6 and MCVKENNZ1-AEKZWI6, but both comes empty.
Is there any way to fill one of these fields to obtain them into LIS?
Thank you very much for your time and best regards.

Hi,
Have you check if you have a value in VBAP-KZWI6 ?
About LIS, you can check in the analysis S001 (Tcode MCTA) the key figures S001-AEKZWI6 (Orders: subtotal 6).
If you have no value, 2 reasons :
- No value in VBAP-KZXWI6 : pb in your pricing procedure
- this is a problem of update between data and LIS (check master data - customer and material - with stat group and Tcode OVRP for item and Tcode OVRO for header).
Regards,
Lionel

LIS Reporting

Dear Gurus,
I have configure LIS in the system, after posting the invoice I run the report, mark related checks in customer and in material master.
System shows the correct amount of "selling" and "billing quantity" in report MC+E report. but the column "Gross Sales" and "Invoice Sales Cost" is don't show any data, its blank.
Will you please guide me what other area need to be configure to call this data too, or is there any mistake I have made so far.
Looking for gurus feedback.
Regards,

Hi Imran,
that will depend on your price procedure.
As guideline:
In custo (tcode MC23) display info structure S001 and in key figures column double click on field gross order. Ther you´ll the field used for structure updates KZWI1 meaning subtotal 1 in your price procedure
Regards,
JM

Anyone experienced data load for S001?

Hi all,
Did anyone load data data to BW for generating S001 report in BW? NEED HELP, PLEASE.
Thank you.
kOALA

Hi Koala,
If you need exactly S001 report then you can use in your R/3 2LIS_01_S001 datasource (RSA5 tcode). It'll be a LIS extraction.
If you need to use more modern Logistics Cockpit extraction then you have to compare which DS in LBWE is more suitable for you.
In RSA5 double click on a DS mentioned, then double click on extraction structure. You'll see the fields that are provided by this LIS DS.
Then in another session in LBWE under Logistics Application find DSs for Applications 11, 12 & 13. Click for Maintenance and you'll see fields and tables that are sources for the particular LO DS.
Best regards,
Eugene

Error 4 occurred while information structure S001 was being updated.

Hi experts,
I set up the environment for the 2LIS_01_S001 DataSource (InfoCube 0SD_C01) accordingly these steps (as mentioned in another thread):
1) Activating LIS update - goto OMO1 transaction code
In the Updating Info Structures(S001) - double-click the Updating radio button for Info structure S001.
In the Parameters dialog box select Synchronous updating and choose ok.
2) Goto OLI7 Transaction code - run the statistical update.
3) Goto OLIX transaction code - setup version &( will be copied to actual version 000 for reporting
4)Go back to OMO1 do deactive the LIS Update, check radio button to "No Update"
5)Now goto LBW0 and choose option "Deactivate" Delta updating in LIS.
6) In BW, Replicate DataSource, and run info Package with Initilization.
7) Now again in R/3 we need to "Activate" Delta option from transaction code LBW0.
8) and last step is to goto OMO1 to activate LIS Update to Synchronous updating and save.
But in step 2 , I am getting an error i.e
Error 4 updating info structure S001
Message no. M2022
Error 4 occurred while information structure S001 was being updated.
The update was attempted with the following key:
&V3 0100000000000000290658
I am not understanding this error,so cant proceed further.
waiting for ur replies.
Thanks in advance.

Hi Colum
I have two systems in both i am doing the same process.
But in my one system i am getting error
but in my other system i am not getting error and my set up table is filled with records.
According to that note key figures sequence in S001, S001BIW1 & S001BIW2 should be same.
but i my other system, key figure sequence is different and i am fine working with it.
so why it is not able to fill my set up table for my other system ?
thanks in advance.

(Old) LIS in (new) R/3 4.7 (Enterprice) & BW 3.5, a pain in the b...

Hi,
Yep it's LIS again. Unfortunately I could not find the answer the our specific issue on the forum (nor at SAP-Help).
We are using the (old) LIS structures S001, S011, S013 & S015 in a R/3 v. 4.7 (latest plugins) & BW 3.5 Environment (as there are no LO-Cockpit structures for these LIS infostructures).
Al the info found on the forum are Setup (Configuration) manuals and info for Older R/3 versions (4.6 and lower).
In 4.7 the LIS (and LO-Cockpit) Infostructures & Datasources are part of the Business content (as we think...). Most of the usual Config-steps (like the BW connection) for LIS do not work for S001, S013 & S015 (at least it does not work here...). Strangly they still work for S011.
Actually some tables in older R/3 environments (as mentioned in the manuals) like the S5nnBIW1/2 does not exist anymore in 4.7.
Anyone any idea or information what SAP has done with these LIS structures (S001, S013 & S015) in 4.7?
And what is still needed to setup and use these Structures (and how)?
Best regards,
Jos
(Netherlands)

Hi all,
What I have found is that you (at least) have to do in 4.7 is to check note: 115192 (we need to implement it).
115192:
Symptom
The data contents of the key fields within the 'delta tables' SnnnBIW1 or SnnnBIW2 are 'corrupt'. Therefore a delta update from structures of the logistics information system is not possible although the environment necessary for this is set up. During the update, SQL error 804 or error M2022 can occur.
In Transaction LBW0 (linking LIS information structures to SAP-BW), error M+040
"The LIS environment is set up incorrectly."
with long text (documentation) - Error occurred when checking the LIS environment.
The order of the information structure key fields differs from the one in delta table SnnnBIW1.
Occurs when displaying the settings for a SAP (LIS & LO-Cockpit, etc.) information structure.
Cause and prerequisites
This is caused by an incorrect sequence of key fields in the delta tables SnnnBIW1 and SnnnBIW2.
Solution
Change the sequence of key fields in the Data Dictionary (Transaction SE11) in the delta tables so that it corresponds to the sequence of the Snnn table in question (for example: the sequence of the tables S260BIW1 and S260BIW2 must be identical with the sequence of table S260) (The message M2 369 'Generated object! Use maintenance of info structure (MC22).' can be ignored). Then activate the delta tables.
This note is a prerequisite for the use of the delta function of the
·     SD transfer structures S260 to S264
        (S264 as of PI-99),
·     SD standard InfoStructures S001 to S006,
·     standard infostructure in Purchasing S013
        in all R/3 Releases.
(Some corrections included in support package, see OSS...)
Jos

Lis setup

for lis when i am try to get data frm r/3.
i am using the infostructure and using version comparision i m tryting to get data into s001. the problem is i am getting only 9 records for sales order setup(i.e. in transaction OLI7).
but when i check in VBAK table it has 500 records.
can anybody tell from which table is OLI7 transaction is getting the sales order details.
thanx in adv
vijay vedhere

for lis when i am try to get data frm r/3.
i am using the infostructure and using version comparision i m tryting to get data into s001. the problem is i am getting only 9 records for sales order setup(i.e. in transaction OLI7).
but when i check in VBAK table it has 500 records.
can anybody tell from which table is OLI7 transaction is getting the sales order details.
thanx in adv
vijay vedhere

LIS Structure issue

Hi gurus,
I am using a standard LIS datasource, 2lis_01_s001 to load data to standard Customer Cube, 0SD_C01. In R/3 am getting 0 records in S001 table so am getting 0 records in RSA3 in turn. As it is a standard datasource and no enhancement has been done, am not able to understand why RSA3 and S001 areshowing 0 records.
Is there anyway that we can populate S001?
Thanks in advance,
Vamsi

Hi Vamsi
Have you configured LIS environment? If yes then check...
I think you dont have any data, Perform statistical Update using OL*BW transaction
Let us know if you need step by step solution, we will mail you.
Regards,
Ashish

LIS Update Problem

I have a problem with LIS reporting which i am not able to rectify . Its a Automotive business, we have 3 order types, ZCKD, ZCBU for Vehicles and ZSPT for Spare parts. All three have same item category YTAN and item category strategic group 1, also all three order types are assigned to order type strategic group 1. All there order types uses same customer and in all customer strategic group 1 is assigned, All materials of CKD, CBU, and Spares have strategic group 1. All assignment at header and item level are done for all sales areas.
Problem is that in LIS reports CKD and CBU values are updating successful but for spare parts even after almost 1000 order it is only shows the Customer name, material sold dates, but no value, all the values are 0, I have checked S001 to S001 in Se16 and for all the spare parts material values are 0. I have done checked at header level and item level update in customizing but it is showing no error, I am not able to find the reason, I also made another order type copied from OR and new spare Part material, and new customer but still no result. Please guide if I am missing something or doing something wrong.
I have also executed Oli7 , 8 ,9 , but no result. I hope I have stated the problem clearly.

LIS
The LIS is a central integrated information system where one can create specific tables that are updated at specific stages and that can be used to report on values contained in specific fields. SAP has standard information structures for reporting purposes. The std info structures can be accessed via: LOSDSISStandard analysis. The reports use the following characteristics: customer, material, sales org, shipping point, sales employee, and sales office.
IMG menu path for SIS: IMG>Logistics General>Logistics Information System (LIS)
The Logistics data warehouse is divided into two main sections: data basis and updating. Data basis is responsible for the actual design of the info structure, that is, what key fields are reported on or displayed. Updating is responsible for the updating rules used by the system, determining how the info structure is to be updated, and when this updating is to take place.
Task 1: Create Self-Defined Information Structure
Use transaction code MC21 (menu path Logistics Data Warehouse>Data Basis>Information Structures>Maintain self-defined information structures> Create) to create a Self-Defined Information Structure. Give a customer-range number 990 (any available number between 501 and 999). To make it easier, use copy from to copy structure from S001.
Task 2: Maintain Update Groups
SIS IMG>Logistics Data Warehouse>Updating>Updating Definition>General Definition Using Update Groups>Maintain Update Groups
You can use the existing system-delivered update groups. Use Update Group (UpdGrp) 1 for the standard order process of: SIS: Sales Document, Delivery, Billing Document and use UpdGrp 2 for the SIS: Returns, Returns Delivery, Credit Memo.
Task 3: Maintain Update Rules
SIS IMG>Logistics Data Warehouse>Updating>Updating Definition>Specific definition using Update Rules>Maintain Update Rules>Create Create (transaction code MC24). To make it easier, use copy from to copy update rules from S001.
Please make sure the Source information is properly updated for all the characteristics. Since you copied the rules, the sales order and item rules are defaulted too. Make sure appropriate changes are made for events VC (delivery) and VD (Invoice).
Task 4: Maintain Statistics Groups
Maintain Statistics Groups
Maintain Statistics Groups for Customers, Materials, and SD Document Types etc. Most of the pre-defined settings are enough. Make sure that settings are updated for customized objects too, e.g., SD document types for your organizations.
Also, make sure that the customer (sales view) and material Master records are updated with appropriate Statistics Groups.
Maintain Statistics Groups for Customers, Material and Sales documents. Assign Statistics Groups for relevant Sales Document Type, item type, delivery type, item type, Determine Billing Document Types Relevant to Statistics.
Update Customer Master for Statistics Relevancy
Transaction Code XD02 (Sales view, field Cust stats.Grp)
Update Material for Statistics Relevancy
Transaction Code MM02 (Sales 2 view, field Matl statistics grp)
Task 5: Assign Update Groups to Header and Item Levels
Assign Update Groups on Header and Item levels
For combinations of Sales Area (Sales Org, Distribution Channel, Division), assign Update groups (transaction codes OVRO and OVRP).
SIS IMG>Logistics Data Warehouse>Updating>Updating Control>Settings: Sales>Update Group
- Update Groups at Item Level
- Update Groups at Header Level
Task 6: Activate SIS Update
Lastly, Activate SIS Update for the Structure (transaction code OMO1)
SIS IMG path: Logistics Data Warehouse>Updating>Updating Control>Activate Update>Choose Activity as Sales and Distribution.
Last update our SIS structure S677 with period as Month and update option of Asynchronous Updating (2).
Regards,
Rajesh Banka
Reward points if helpful

Reg: Error for updating info structure S001

Hi ,
While creating sales order, delivery and purchase order. iam getting the follwing error:
"Error 4 updating info structure S001". Please help me.
Thanks,
Bandi

Hello,
Updates of these reporting tables are done in asynchronous mode.
Check transaction SM13 and try to find back the update of table S001 and analyze the error.
Several OSS-notes explain what can go wrong with updates of LIS and SIS tables like S001.
Wim

Billing Qty by Sales office and Sales group (LIS)

Hello!
I am running the report MC-E, I want to see there (or at another report of LIS) the ratio Billing Quantity, but shown by Sales office and/or by Sales group, could anybody help me?
Thank you in advance
Regards

Hello Enrique
You may add key figure 'Billing Quantity' to standard Infostructure S002 or add characteristics "Sales Office' or 'Sales Group' to Infostructure S001.
Or if you don't want to tamper with standard delivered, copy S001 or S002 and create custom Infostructure ( S500+) with the requisite characteristics and key figures.
Hope this helps.

LIS S001

Similar Messages

Maybe you are looking for