List files in numeric order past the first two digits

I scanned docs onto a usb stick & saved as pdf files using an 8 digit date.  When I go to open the files they are only in order for the first 2 digits.  How can I get adobe to put them in order using all 8 digits so that they are listed in date order including day & year?

The OS won't sort by date like that. If you look, it IS sorting "numerically" as the "dates" are in order numerically from smallest to largest.
What I do to sort by date is use this format "YYYYMMDD"

Similar Messages

  • To skip the first two Digits of the Char in Query

    Iam using County code which is the attribute of Vendor in free-chars of my query. In back-end iam doing some enhancements for this county code and populating the county codes values with region. (For example if the country code value is 021 in back end iam populating by concatenating with region value. so the value in the back-end is 05021.)
    When i run the query the key of county code value i see is 05021. But i need to skip the first two digits in county code and should display in the result. Is there any way to skip the first two digits for the county code values.
    Thanks in Advance
    Sudhakar

    Hi Sudhakar,
    Pls go through the link:
    Remove the last two charecters from right
    Thanks and Regards,
    Ramki

  • Is there a way for Tiger to list files in numerical order?

    I have files that number 1-100+. My files will not list in numerical order. They will go to tens and twentys and then list 2,20,21,22 then 3,30,31,32 4,40,41,42 and so on. How can I get it to list straight 1-100? I tried a search but didn't come up with solution.
    Thanks,
    Ymir

    You probably need to modify the file names so they will sort according to the OS X rules. See if this note helps:
    http://discussions.apple.com/thread.jspa?threadID=121936&tstart=105

  • How can I pull info into a report using just the first two characters of that field?

    I am trying to pull a total cost based upon locations in a particular area(s). Can I get the formula to just do this based on the first two characters of that field?
    Here is what I have so far:
    if {PACKED.LOCATIONS.NEXT OPERATION} = ["xx"] THEN {Job.Total_Price}
    Packed locations is a table I'm pulling from and the column I want just the first two digits is the the Next operation. Once this meets the "xx" (whatever location) then give me the total price from the Job table.
    This works for one or two orders, but then blows up when I do 10 or so.

    Hi Steve, assuming that Next Operation is a string field...
    Create a new formula and place it in the field where you see the {Job.Total_Price} field (Detail or Group depending on your report) with the formula:
    whileprintingrecords;
    global numbervar TotalValue;
    if len({? Replace me}) <= len({PACKED.LOCATIONS.NEXT OPERATION}) then(
    if left(ucase({PACKED.LOCATIONS.NEXT OPERATION}),len({? Replace me})) = ucase({? Replace me}) then
    TotalValue := TotalValue + {Job.Total_Price}
    TotalValue;
    You can go ahead and suppress that field.
    Create a new formula to place where you want to view the summary using the formula:
    whileprintingrecords;
    global numbervar TotalValue;
    This method allows for a higher degree of flexibility and you can search for the first x characters of that field instead of only the first 2 characters

  • Making first two digits of all cells increment one unit

    hi friends
    i am not expert in MS Excel & i need an urgent help.
    i had created a long excel sheet in Excel 2013 which i paste a part of that sheet here:
    the list is very long.
    now for some reasons, i have to edit this sheet so that in all cells, the first two digits from left increment one unit, as i have manually done that in the following figure. ( note: i don't want the color get read. i changed the color only to better view)
    the problem is that i don't do that manually because there are hundreds of cells & that takes long time.
    please introduce me all the methods which i can do that at once. (the format of all cells is text).
    really thanks in advanced

    Use this formula, starting in row 1 and copy down. Copy the result, use paste special to paste as Values over column A. Delete the formula.
    =TEXT(LEFT(A1,2)+1,"00")&MID(A1,3,99)
    cheers, teylyn
    Hi teylyn
    sorry for being late
    that's Great.thank you very very much, really helped me.
    best wishes for you
    regards

  • Dial tone after first two digits are dialed

    I was just made aware that one of our sites when dialing out (local, LD, TF, etc) receives dial tone after dialing the first two digits of any number.  They can continue to dial the number and will call out.  I am trying to understand where the dial tone is coming from after the 2nd digit is dialed.  Any idea's?
    CUCM 8.5
    2821 Gateway - MGCP - T1PRI

    I absolutely agree with Aaron's statement that ALL route patterns need to have the 'provide outside dial tone' checked on all applicable route patterns.  I would also like to note that any dial plan overlap with those route patterns would also cause delay in secondary dial tone.
    For example if you dial 9 to get out and a dial-able extension gets added accidentally to a phone that also starts with a 9, that could cause similar issues.
    So after checking route patterns first and if all that looks correct, I recommend Call Routing -> Route Plan Report, to search for ALL numbers that start with your outside access code.

  • Why does preview not load a group of sequential files in order? The first is placed randomly!

    Since upgrading to Lion, I have found that when I grab a group of sequentially numbered jpgs that they all load in the proper order except the first. The first is placed randomly in the list. Since I want to go through the files in the sequential order this can be quite annoying.
    I load about 70 to 150 at a time and Preview has the same behavior each time.
    I seem to recall this happened with OS X back a few versions and then it was rectified.
    Anyone else have the same problem or can duplicate the problem.
    Is there a way to submit this bug to Apple?

    Apple - Mac OS X - Feedback

  • Combining files in numerical order

    How do I combine pdf files so that the new "binder" is in the same numerical order as the list of files?  I am creating a booklet with the page numbers printed on each page, so they must be in the same order in the final pdf document.

    Since Acrobat has problems with this, I've developed a stand-alone tool to do just that:
    http://try67.blogspot.com/2011/05/merge-pdf-files-in-true-numeric-order.html

  • Built my first PC, won't get past the first screen :(

    Took me 12 hours to do my first build (I know, took too long) and I was so happy at first once everything was done but that didn't last long unfortunately. :( I'm stuck at the first screen where it lists my PC components and it tells me to either press DEL or F11. Nothing works. It's as if my keyboard is not being recognized... which it does because it says "1 KBDs, 1 MICE etc." in that same screen.
    Parts are:
    * MSI Computer Corp. Motherboard North Bridge AMD 970 & South Bridge AMD SB950 Chipset ATX DDR3 800 AMD AM3+ Motherboards (970A-G46)
    * AMD FD6300WMHKBOX FX-6300 6-Core Processor Black Edition
    * PNY 8GB Kit (2 x 4GB) 8 Dual Channel Kit DDR3 1866 (PC3 15000) 240-Pin DDR3 SDRAM MD8192KD3-1866-X9
    * ASUS HD7790-DC2OC-1GD5 Radeon HD7790 1GB GDDR5 128-bit, DVI-I/DVI-D/ HDMI/DP PCI-Express 3.0 CrossFire ready Graphic Card OC-selected 1075MHz core
    * WD Blue 1 TB Desktop Hard Drive: 3.5 Inch, 7200 RPM, SATA 6 Gb/s, 64 MB Cache - WD10EZEX
    Every single one of these parts is listed in that first screen where I'm stuck at so that means everything is working, right (i.e., not dead on arrival or I didn't damage anything)? I did a Google search and this guy here (can't post links so the URL is not formatted) ->overclock.net/t/1426196/all-new-custom-pc-wont-get-past-the-bios-setup-screen<- had the same problem as I was and he pretty much has the same parts as me and he fixed the problem by using a pair of RAM with a lower voltage.
    On MSI's page, it says there that the motherboard that I'm using supports 1.5V of RAM and I just checked the manufacturer's page for the  RAM that I'm using and my RAM is listed as using 1.65V... could this really be the problem? Should I go ahead and get new RAM or is there maybe something else?
    I also removed the CMOS battery for 1 hour and then moved the jumper to positions 2 and 3 to short the pins and I still can't get past the first screen. I'm going to try using just one stick of RAM next and should I insert it in DIMM1 or DIMM2?
    Thanks in advance!

    Quote from: XFM on 11-November-13, 06:25:55
    Get a stick of cheap 1.5V RAM and give it a try. Plenty of good quality cheap RAM out there. In this instance my meaning of cheap is "low price" not low quality.
     To be honest I would suggest to just go ahead and get some Corsair RAM such as what you see in my signature below. That is one brand that seems to work good in just about any system built using MSI MB whether it be AMD or Intel.
    Thanks! I just ordered these - http://www.amazon.com/dp/B003N8GVUY/
    Cheapest Corsairs I could find with 1.5V
    Quote from: XFM on 11-November-13, 06:25:55
    Another question I forgot to ask is what is the brand and model of your power supply?
    I'm using one from an old PC... this one - http://www.newegg.com/Product/Product.aspx?Item=N82E16817121037

  • I have Adove Reader XI. All my files have a picture as the first page. I used to be able to see the picture for each file. Now all I see is the PDF logo. How can I change this so I can see the pictures instead of the logo?

    I have Adobe Reader XI. All my files have a picture on the first page. I used to be able to see that picture but now I can only see the PDF logo. How can I change that so I can see the pictures instead of the logo?

    Windows 7

  • I attempted to download a song. It originally did not download correctly. I refreshed the download and it supposedly completed. Upon playing the song in both my library and on the Itunes store it will not play past the first 5 seconds. How can I fix this?

    It originally did not download correctly. I refreshed the download and it supposedly completed. Upon playing the song in both my library and on the Itunes store it will not play past the first 5 seconds. How can I fix this?

    Hello Whitney262,
    Thanks for using Apple Support Communities.
    I would go ahead and make sure you can first download the content, then remove the song from your iTunes Library, and download again from your iTunes past purchases.  The article below will walk you through the entire process:
    Download past purchases
    http://support.apple.com/kb/ht2519
    Take care,
    Alex H.

  • Safari it will not advance past the first page of a PDF Document

    Running Safari 5.1 under Snow Leopard 10.6.8 on a d MacBook Pro when I try to read a PDF document in Safari it will not advance past the first page. I get the first page of the document in the browser window. No navigation in the toolbar, the up, down, right and left arrows do nothing nor does the return/enter key.

    If you are using Adobe Acrobat >  Apple Safari 5.1 and Adobe Reader/Acrobat Advisory

  • I want to sign the SECOND page of a pdf document and this system won't let me scroll down past the first page!

    I want to sign the SECOND page of a pdf document and this system won't let me scroll down past the first page!

    Having the same issue, can someone please enlighten us?

  • When I convert my file to excel it cuts off the first two columns, is there a way to fix that??

    When I convert my file to excel it cuts off the first two columns, is there a way to fix that??

    Hey Diann,
    Please let me know whether you are using Adobe Reader or signed up at "https://cloud.acrobat.com/"
    If you are using Adobe Reader, then try converting the file online and vice-versa.
    Let me know.
    Regards,
    Anubha

  • I am unable to get past the first step of Winston Churchill's answer because my phone says "checking for a software update failed because you are not connected to the Internet". Did my WiFi connection also get lost?

    I am unable to get past the first step of Winston Churchill's answer because my phone says "checking for a software update failed because you are not connected to the Internet."  Did my iphone's WiFi connection also get lost with the Contacts, Mail and Text Messages?  When I tried the software update, as recommended by Winston Churchill, the iphone was connected to my desktop which is connected to the Internet.

    You can't use your computers Internet connection to update your phone from the phone itself. If you want to use the computers Internet connection to update your phone you must update it through iTunes.

Maybe you are looking for