List of BW reports
Hi Gurus,
I need to develop a list of all BW reports from all info providers in a particular info area.Is there any table in BW which store this info? What should be the approach to find this info?
Thanks,
Anil
Anil
You could try table "RSRREPDIR" also check this thread
Re: Query Detailes
Hope this helps
Thnaks
Sat
Similar Messages
-
What is difference between interactive list and interactive reports?
what is difference between interactive list and interactive reports?
hi check this..
interactive report/list means any input(double click or single click or user command ) on the screen will results a new screen with the corresponding fields....this is upto 20 levels only check this..
report .
start-of-selection.
write:/ 'this is the source list'.
at line-selection .
if sy-lsind = 1 .
write:/ ' this is the 1st list'.
elseif.
if sy-lsind = 2 .
write:/ ' this is the 2 list'.
if sy-lsind = 3 .
write:/ ' this is the 3 list'.
if sy-lsind = 4 .
write:/ ' this is the 4 list'.
if sy-lsind = 5 .
write:/ ' this is the 5 list'.
if sy-lsind = 6 .
write:/ ' this is the 6 list'.
if sy-lsind = 7 .
write:/ ' this is the 7 list'.
if sy-lsind = 8.
write:/ ' this is the 8 list'.
if sy-lsind = 9 .
write:/ ' this is the 9 list'.
if sy-lsind = 10 .
write:/ ' this is the 10 list'.
endif.
regards,
venkat -
List of Standard Reports in Purchasing and Inventory
Pls send me list of Standard reports for Purchasing and inventory.
Thanks-ManjuThis is duplicate thread (NO POINTS required)
Hello Manjula,
Go to transaction code SAP1, this will show all the reports functional area-wise.
For purchasing reports : Go to Material management --> Purchasing
For Inventory management reports : Go to Material management --> Inventory management
Hope this helps
Regards
Arif Mansuri -
How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?
Hi All,
We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.Hi,
Here you go..
1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
This step you get query reference sheet or column or query general UUID for next step.
4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
Hope this helps.
Please keep in mind, it might take more time depends on how many query elements you have in the system...
Comments added for better DB performance by: Arun Thangaraj -
How to find the list of custom reports?
Hello All,
I am trying to get a list of all the custom reports that we have by responsiblity in 11.5.10.2. This to identify and move them into the our newly upgraded R12 instance.
Is there a query that can be written against the FND tables to get this listing?
Pls. help
Thanks,
Monkey.I am trying to get a list of all the custom reports that we have by responsiblity in 11.5.10.2. This to identify and move them into the our newly upgraded R12 instance.
Is there a query that can be written against the FND tables to get this listing?There is no direct way to get the list of custom reports unless you followed the naming convensions when you created those reopports (i.e. your object/file name starts with XX_%).
https://forums.oracle.com/forums/search.jspa?threadID=&q=List+AND+Custom&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
In this case, you can query FND_CONCURRENT_PROGRAMS_TL/FND_CONCURRENT_PROGRAMS/FND_CONCURRENT_PROGRAMS_VL -- Search the forum for those objects and you will find many helpful queries.
Thanks,
Hussein -
Unable to retrieve the list of Standard Reports
Hi,
User needs an aging report in PW90 paper but gets an error message when clicking on to the report tab once logged into SAP portal.
Error message:
Unable to retrieve the list of Standard Reports. Please call the Help Desk to report the problem. Error encountered while connecting to R/3. java.lang.NullPointerException.
I checked the java support in Internet explorer and deleted the cookies and temporary files but he kept having the same issue.
Please Help on this !!
Thanks in advance.Hi,
Try to restart the portal server.
Regards, -
How to handle interactive list in alv reports
hi experts.
how to handle interactive list in alv reports.
regards.
subhasisHI Subhasis,
below is the sample code for handling an interactive ALV report, hope this helps you ..
REPORT ZTEST_ALV123.
TYPE-POOLS:SLIS.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
IT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV.
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 0,
VBELN LIKE LIKP-VBELN,
POSNR LIKE LIPS-POSNR,
VGBEL LIKE LIPS-VGBEL,
VGPOS LIKE LIPS-VGPOS,
END OF ITAB1.
DATA: IT_LIPS LIKE ITAB1 OCCURS 0 WITH HEADER LINE.
SELECT VBELN
POSNR
FROM VBAP
INTO TABLE ITAB.
IF SY-SUBRC = 0.
SORT ITAB BY VBELN .
SELECT VBELN
POSNR
VGBEL
VGPOS
INTO TABLE ITAB1
FROM LIPS
FOR ALL ENTRIES IN ITAB
WHERE VGBEL = ITAB-VBELN
AND VGPOS = ITAB-POSNR.
ENDIF.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'PFSTATUS'
I_CALLBACK_USER_COMMAND = 'HANDLE_USER_COMMAND'
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC = 0.
ENDIF.
*& Form POPUP
text
-->P_EXTAB text
FORM POPUP USING P_EXTAB TYPE SLIS_T_EXTAB.
"here double click on PFSTATUS and create the status, "activate, before that set PICK for choose(F2).
*- Pf status
SET PF-STATUS 'PFSTATUS'.
ENDFORM. " POPUP
*& Form HANDLE_USER_COMMAND
text
-->R_UCOMM text
-->RS_SELFIELD text
FORM HANDLE_USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
IF RS_SELFIELD-FIELDNAME = 'VBELN'.
READ TABLE ITAB INDEX RS_SELFIELD-TABINDEX.
LOOP AT ITAB1 WHERE VGBEL = ITAB-VBELN
AND VGPOS = ITAB-POSNR.
MOVE-CORRESPONDING ITAB1 TO IT_LIPS.
APPEND IT_LIPS.
ENDLOOP.
PERFORM INTERACTIVE_REPORT.
ENDIF.
ENDCASE.
ENDFORM. "HANDLE_USER_COMMAND
*& Form interactive_report
text
FORM INTERACTIVE_REPORT .
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = 'VBELN'.
X_FIELDCAT-TABNAME = 'IT_LIPS'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT1.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = 'ITEM'.
X_FIELDCAT-TABNAME = 'IT_LIPS'.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT1.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'VGBEL'.
X_FIELDCAT-SELTEXT_M = 'SO #'.
X_FIELDCAT-TABNAME = 'IT_LIPS'.
X_FIELDCAT-COL_POS = 3.
APPEND X_FIELDCAT TO IT_FIELDCAT1.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'VGPOS'.
X_FIELDCAT-SELTEXT_M = 'SO ITEM'.
X_FIELDCAT-TABNAME = 'IT_LIPS'.
X_FIELDCAT-COL_POS = 4.
APPEND X_FIELDCAT TO IT_FIELDCAT1.
CLEAR X_FIELDCAT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IT_FIELDCAT = IT_FIELDCAT1
TABLES
T_OUTTAB = IT_LIPS
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC = 0.
ENDIF.
ENDFORM. " interactive_report
Regards,
Ranjita
null -
How to use intractive list in Alv REPORT
how to use intractive list in Alv REPORT with example.
thangs
venki.......Hi
using the USER_COMMAND we can move to the Secondary(interactive) list in the ALV
see the sample code
report yh645_secndry_alv.
type-pools: slis.
data: fieldcat type slis_t_fieldcat_alv,
fieldcat_ln like line of fieldcat,
fs_layout type slis_layout_alv,
t_layoout like standard table
of fs_layout.
data: begin of fs_spfli,
carrid type spfli-carrid,
connid type spfli-connid,
countryfr type spfli-countryfr,
cityfrom type spfli-cityfrom,
airpfrom type spfli-airpfrom,
countryto type spfli-countryto,
cityto type spfli-cityto,
airpto type spfli-airpto,
fltime type spfli-fltime,
deptime type spfli-deptime,
arrtime type spfli-arrtime,
distance type spfli-distance,
distid type spfli-distid,
fltype type spfli-fltype,
period type spfli-period,
checkbox,
color(3),
end of fs_spfli.
data:
begin of fs_table,
carrid type spfli-carrid,
connid type spfli-connid,
end of fs_table.
data: begin of fs_sflight,
check,
color(3).
include type sflight.
data:end of fs_sflight.
data:
begin of fs_table1,
carrid type sflight-carrid,
connid type sflight-connid,
fldate type sflight-fldate,
end of fs_table1.
data:
t_spfli like standard table
of fs_spfli.
data:
t_table like standard table
of fs_table.
data:
t_table1 like standard table
of fs_table1.
data:
t_sflight like standard table
of fs_sflight.
data:
t_sbook like standard table
of sbook.
data t_layout type slis_layout_alv.
select *
into corresponding fields of table t_spfli
from spfli.
perform start_list_viewer.
perform get_spfli_details.
*& Form SUB1
text
-->RT_EXTAB text
form sub1 using rt_extab type slis_t_extab.
data: flight type slis_extab.
flight-fcode = 'SFLIGHT'.
append flight to rt_extab.
set pf-status 'SFLIGHT'. " EXCLUDING RT_EXTAB.
endform. "SUB1
*& Form START_LIST_VIEWER
text
--> p1 text
<-- p2 text
form start_list_viewer .
data: pgm like sy-repid.
pgm = sy-repid.
fs_layout-box_fieldname = 'CHECKBOX'.
fs_layout-info_fieldname = 'COLOR'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_callback_pf_status_set = 'SUB1'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'SPFLI'
is_layout = fs_layout
tables
t_outtab = t_spfli
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " START_LIST_VIEWER
*******Process Call Back Events (Begin)**************************
form user_command using ucomm like sy-ucomm
selfield type slis_selfield.
case ucomm.
when 'SFLIGHT'.
selfield-refresh = 'X'.
perform get_spfli_details.
select *
from sflight
into corresponding fields of table t_sflight
for all entries in t_table
where carrid eq t_table-carrid
and connid eq t_table-connid.
perform display_sflight.
when 'SBOOK'.
selfield-refresh = 'X'.
perform get_sflight_details.
select *
from sbook
into corresponding fields of table t_sbook
for all entries in t_table1
where carrid eq t_table1-carrid
and connid eq t_table1-connid
and fldate eq t_table1-fldate.
perform display_sbook.
endcase.
endform. "USER_COMMAND
*& Form SUB2
text
-->RT_EXTAB text
form sub2 using rt_extab type slis_t_extab.
data: flight type slis_extab.
flight-fcode = 'SBOOK'.
append flight to rt_extab.
set pf-status 'SBOOK'. " EXCLUDING RT_EXTAB.
endform. "SUB2
*& Form DISPLAY_SFLIGHT
text
--> p1 text
<-- p2 text
form display_sflight .
data: pgm like sy-repid.
pgm = sy-repid.
clear t_layout.
fs_layout-box_fieldname = 'CHECK'.
fs_layout-info_fieldname = 'COLOR'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_callback_pf_status_set = 'SUB2'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'SFLIGHT'
is_layout = fs_layout
tables
t_outtab = t_sflight
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_SFLIGHT
*& Form GET_SPFLI_DETAILS
text
--> p1 text
<-- p2 text
form get_spfli_details .
loop at t_spfli into fs_spfli.
if fs_spfli-checkbox = 'X'.
fs_spfli-color = 'C51'.
fs_spfli-checkbox = '1'.
fs_table-carrid = fs_spfli-carrid.
fs_table-connid = fs_spfli-connid.
append fs_table to t_table.
modify t_spfli from fs_spfli.
endif.
endloop.
endform. " GET_SFLIGHT_DETAILS
*& Form GET_SFLIGHT_DETAILS
text
--> p1 text
<-- p2 text
form get_sflight_details .
loop at t_sflight into fs_sflight.
if fs_sflight-check = 'X'.
fs_sflight-color = 'C71'.
fs_sflight-check = '1'.
fs_table1-carrid = fs_sflight-carrid.
fs_table1-connid = fs_sflight-connid.
fs_table1-fldate = fs_sflight-fldate.
append fs_table1 to t_table1.
modify t_sflight from fs_sflight.
endif.
endloop.
endform. " GET_SFLIGHT_DETAILS
*& Form DISPLAY_SBOOK
text
--> p1 text
<-- p2 text
form display_sbook .
data: pgm like sy-repid.
pgm = sy-repid.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_structure_name = 'SBOOK'
tables
t_outtab = t_sbook
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_SBOOK
Reward points for useful Answers
Regards
Anji -
How to create more than 21 lists in interactive reports
hello everyone,
I am new to ABAP as well as this site. Kindly help, I want to know how to create more than 21 lists in interactive reports.
Also, how can i create them without using WHEN 1, wHEN 2 and so on...
Kindly help.
thank youHello,
Using Intracive Reports its not possible to cretate more than 21 lists.
But its possible to create more than 21 using ALV concept.
for sample ALV u can serch in SDN.
Regards,
Anil. -
List of Oracle Reports run through Oracle Portal.
Hi,
It's possible that I am posting my message to a wrong Forum. If that's so, please let me know (and the correct forum too).
I have several Oracle Reports that are run through Oracle Portal (when user clicks a link for a report). I want to get a list of all such Oracle Reports in one go as I need to modify all of them. At the moment, to get the actual report name that I need to modify I am following the steps below.
When I am at 'Oracle Reports Security' page (in the Portal) where there is a section 'Reports Definition File Access',
1. I click list icon without entering any value in the box. It shows me a list of all report definitions.
2. After selecting a report definition, and clicking Edit, it shows me 'Manage Component' page. There are several links available. One of them is 'Edit'.
3. I click 'Edit' and it shows me the actual 'Oracle Reports File Name'. This is the file I need to work on.
But instead of following the above steps for each of the several reports I need to modify, is there any way, say by running a SQL query, to find out the actual Oracle Reports file names?
The 'Manage Component' page shows 'Run Link' and links for 'PL/SQL source'. I tried to search for the schema name and package name in the database (by connecting as SYS user). However, I found neither the Schema not the Package.
Hope my question is clear. In brief, I want to get a list of Oracle Reports file names that are run through Oracle Portal.
Any questions, please let me know.
Thanks and regards,
Manoj.Jim,
Did you ever try to add Reports portlet as an item, so that user can click on each item to customize/schedule the report? You can have 50 of them, if that is what you really need.
Any reason why you want to create custom user interface, instead of using this vehicle that Portal provided by default?
You mentioned "The report Portlet ... does not allow customization." Actually, it does. You can do it by clicking on the Customize link of the Reports portlet.
Hope this helps,
-Jeff -
Is it possible to change values in pagination select list for a report?
The values showing up in my pagination select list for a report are 10,15,20,30,50,100,200,500,1000,5000.
Is it possible to not have this list show the 1000 and 5000 values? I've tried setting various row values in the layout and pagination section of the report, but nothing changes in the select list. Is there a way to change this, or is it set up in a template somewhere that I can change?
APEX version 3.0
ThanksFigured this one out. Using the P1_ROWS item, added a static LOV with the correct values to override the one APEX was providing. The P1_ROWS item goes in the Number of Rows (Item) field in the layout and pagination section of the report.
-
Need list of Crystal Reports Version Numbers by Product and Service Pack
Hi All,
Where can I get a list of Crystal Reports Version Numbers by Product and Service Pack? I'm trying to figure out which version we have is the most current version, because we have so many version installed threw out our company.
Thanks.Hi Matt,
Please check the crystal Report 2008 product versions
Cr 2008+SP0 - 12.0.0.683
Cr 2008+SP0 + FP1 - 12.0.0.796
Cr 2008+SP0 + FP2 - 12.0.0.840
Cr 2008+SP0 + FP3 - 12.0.3.900
Cr 2008 + SP1 - 12.1.0.882
Cr 2008 + SP1 + FP1.1 - 12.1.1.957
Cr 2008 + SP1 + FP1.2 - 12.1.2.996
Cr 2008 + SP1 + FP1.3 - 12.1.3.1028
Cr 2008 + SP1 + FP1.4 - 12.1.4.1068
Cr 2008 + SP1 + FP1.5 - 12.1.5.1096
Cr 2008 + SP1 + FP1.6 - 12.1.6.1116
Cr 2008 + SP1 + FP1.7 - 12.1.7.1144
Cr 2008 + SP1 + FP1.8 - 12.1.8.1176
Cr 2008 + SP1 + FP1.9 - 12.1.9.1290
Cr 2008 + SP1 + FP1.10 - 12.1.10.1390
Cr 2008 + SP1 + FP1.11 - 12.1.11.1454
Cr 2008 + SP2 - 12.2.0.290
Cr 2008 + SP2 + FP2.1 - 12.2.1.412
Cr 2008 + SP2 + FP2.2 - 12.2.2.453
Cr 2008 + SP2 + FP2.3 - 12.2.3.467
Cr 2008 + SP2 + FP2.4 - 12.2.4.507
Cr 2008 + SP2 + FP2.5 - 12.2.5.537
Cr 2008 + SP2 + FP2.6 - 12.2.6.567
Cr 2008 + SP2 + FP2.7 - 12.2.7.598
Cr 2008 + SP2 + FP2.8 - 12.2.8.638
Cr 2008 + SP2 + FP2.9 - 12.2.9.698
Cr 2008 + SP2 + FP2.10 - 12.2.10.810
Cr 2008 + SP3 - 12.3.0.601
Cr 2008 + SP3 + FP3.1 - 12.3.1.684
Cr 2008 + SP3 + FP3.2 - 12.3.2.753
Cr 2008 + SP3 + FP3.3 - 12.3.3.812
Thanks,
Naga. -
Require details or list of seeded reports and import programs in fusion HCM
Hello All,
Kindly provide me the list of seeded reports and Import programs available in Oracle Fusion HCM .
Regards,
S RaoPlease raise a SR
-
List of Customized Reports /transaction
Hi All,
We have to get the list of customized reports/transactions which have not been used since 3 months.
Please let me know the way to sort this issue.
Regards,
PrashantOne way is to get the list of transactions/reports used from ST03N and then you can determine which all customized ones were not used.
You can get this from ST03N >> select the day/week/month by double clicking
In the bottom Analysis view, select the transaction profile >> standard.
There you will get the details of transactions used. So, i guess from here, you will be able to get find out which were not used.
Regards,
Jazz -
Add field TIDNR to list edit PM reports
Hi,
We have a requirement to add field TIDNR (Technical Identification number) from ITOB table into several list edit PM reports (IW28/29/38/39/64 to 69)
I have read sap note [586523|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=586523] but this relates to adding customer defined fields and amending output structures and as the above field is a Sap standard field is it possible someone could give me some advice on how this could be done.
Regards
GaryHi,
For IW28:
Create a custom append at the end of structure RIHQMEL_LIST.
Create an implicit enhancement in the SAP programmes that need the new field (that you will have to find out yourself)
Roy -
Hi Team,
We have a requirement to add SupportGroup and Classification as a column in the "List of Incidents" report. WE know that we need to modify the stored procedure to make these columns available in the Dataset. Or can we link 2 dataset in the tablix
in SSRS.
Regards,
Dinesh
Thanks & Regards, DineshI have solved it myself by adding few lines in stored procedure. Would like to share the solution, so that it will be helpful for others.
Open the stored procedure which we are using for the default "List of Incidents" reports.
Add the below under SELECT
SupportGroup = ISNULL(TierQueuesDS.DisplayName, TierQueuesEnum.IncidentTierQueuesValue),
TierQueuesEnum.IncidentTierQueuesId AS TierQueuesId,
Classification = ISNULL(ClassificationDS.DisplayName, ClassificationEnum.IncidentClassificationValue),
ClassificationEnum.IncidentClassificationId AS ClassificationId,
Add the below under FROM
LEFT OUTER JOIN
dbo.IncidentTierQueuesvw AS TierQueuesEnum
ON TierQueuesEnum.IncidentTierQueuesId = I.TierQueue_IncidentTierQueuesId
LEFT OUTER JOIN
dbo.DisplayStringDimvw TierQueuesDS
ON TierQueuesEnum.EnumTypeId=TierQueuesDS.BaseManagedEntityId
AND TierQueuesDS.LanguageCode = @LanguageCode
LEFT OUTER JOIN
dbo.IncidentClassificationvw AS ClassificationEnum
ON ClassificationEnum.IncidentClassificationId = I.Classification_IncidentClassificationId
LEFT OUTER JOIN
dbo.DisplayStringDimvw ClassificationDS
ON ClassificationEnum.EnumTypeId=ClassificationDS.BaseManagedEntityId
AND ClassificationDS.LanguageCode = @LanguageCode
Then open the report from Report Builder and add new column in the design. Add Support Group and Classification as a column in the report.
Thanks & Regards, Dinesh
Maybe you are looking for
-
Lightroom Mobile sync and 2 computers
Hi All, I've looked but I can't see a specific answer to this question, so I thought I'd make it my first posting. I've just subscribed to Creative Cloud for Lightroom. I liked the idea of being able to sync different devices and continue work whilst
-
Safe to turn off time capsule when not using it?
Should you turn off your time capsule when you are not using it or should you just leave it on all of the time?? I really don't want it to die on me... Thank you.
-
Hi All I have some queries on eCATT.It is regarding to run the test script for external data where the data is in Excel or in Text form. Your solution will be very helpful for me. I have created one test script using FK01(Vendor creation). The Fields
-
DRM services are not getting up..
Hi, We have had changed the password for our windows account after which my DRM services is not getting up. the same is working fine with one of the environemnt(prod) but issue is with DEV. please suggest. thanks Regards, Raj
-
Problem pairing iphone5 to iphone4s or ipad via bluetooth
Hi, I was trying to pair my iphone5 with my iphone4s or my new ipad via bluetooth, but it seems like they can't find each other. My iphone4s able to find the new ipad and vice versa, so the problem must be with the iphone5. Anybody know how to resolv