List view threshold error in list view web part, column indexing not working

Hello all,
I have a list with about 8000 items and the list view threshold is set at 5000. I want to filter the list by a certain column ("Title", single line of text) so I indexed that column. I can filter the list (AllItems.aspx) however if I put the list
on a web part page (in the form of a list view web part), I can't filter by that column. Shouldn't the indexed column allow this?
Note that the threshold will not be increased and a daily time period to bypass the threshold is in place, but I'm looking for a solution for any time of they day.
Thanks!

Thanks for your response. Your suggestion did work! It got me thinking and I took some time to investigate this column indexing stuff a little closer. I had an "ah-ha" moment.
Regardless of whether the column has an index or not, dynamic drop down filtering in a list view web part will only work if the list view has fewer items than the threshold. This is the critical point I was missing. I was assuming the index would allow for
drop down filtering.
Thanks again!

Similar Messages

Edit web part option does not appear in browser on lists

I've inserted some lists on a wiki page. However, when viewing in the browser the checkbox and the dropdown containing the Edit Web Part option do not appear. On the properties tag I thought I enabled all the correct properties such as Allow Edit, Allow
Minimize etc. What am I missing?

Hi Larry,
According to your description, my understanding is that the Edit web part option disappeared in the list web part.
I recommend to check if the account has permission to edit the web part, please check the permission of the account in Site Permissions and the list permissions.
Please also check if the target audience is set in the web part.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
VIBAC

I downloaded and installed
OS X Lion 10.7.5 Supplemental Update
and that solved my problem completely. (368 AU plugins now works!)

Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

Did you try everything here:
iOS: Device not recognized in iTunes for Windows
Then try a different computer to help determine if yo have an IPod or computer problem.

"Configuration error" I uninstall and reinstall Muse, but it not works.

Hello, I have problem with Muse. I installed last update and after install I can't open Muse. I have "Configuration error" I uninstall and reinstall Muse, but it not works. Thanks

Hi,
What is the complete error message? Are you using Windows or Mac? Did you try to disable anti virus while installing Adobe Muse?
Please provide some details, so we can get more idea about the problem

Tried to update iPhone 4 to iOS 6 and my phone got stuck in recovery mode. My only option now is to restore my iPhone and lose media. However, I then tried to restore my iPhone and error 1603 occurred. My iPhone is now not working!?!?!

Tried to update iPhone 4 to iOS 6 and my phone got stuck in recovery mode. My only option now is to restore my iPhone and lose media. However, I then tried to restore my iPhone and error 1603 occurred. My iPhone is now not working!?!?!

if your computer is not recognizing it, try using a different USB port or different usb cable. if that doesnt work you will need to uninstall and reinstall itunes.

ADT: Web Dynpro view/window error "Failed to create the part's controls"

Hi, all
Most of the things in my ADT work fine (e.g. programs, structures, domains), even the Web Dynpro Componentcontroller can be edited.
However, with Web Dynpro view and window I get this error message: "Failed to create the part's controls".
In SAP GUI everything works fine.
Why could this happen and what can I do?
My system details:
32-bit Windows 7
Eclipse Luna Release (4.4.0)
ADT from https://tools.hana.ondemand.com/kepler, according to these instructions: SAP Development Tools for Eclipse.
SAP GUI 7.30, patch level 9.
SAP_ALL authorizations
Java: SE, version 7 update 60
Activated services (SICF): wdy_aie_vd_preview, toolsdocu, docu
The Java error log in Eclipse is quite long. It starts with:
java.lang.IllegalStateException: java.lang.IllegalArgumentException: No enum constant com.sap.adt.wda.controller.semanticfs.common.ControllerFileServices.ControllerObjectTypeEnum.WDYNWZ
    at com.sap.adt.tools.core.ui.editors.AdtFormEditor.addPages(AdtFormEditor.java:222)
    at org.eclipse.ui.forms.editor.FormEditor.createPages(FormEditor.java:138)
    at com.sap.adt.tools.core.ui.editors.AdtFormEditor.createPages(AdtFormEditor.java:1251)
    at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:362)
    at org.eclipse.ui.internal.e4.compatibility.CompatibilityPart.createPartControl(CompatibilityPart.java:140)
    at org.eclipse.ui.internal.e4.compatibility.CompatibilityEditor.createPartControl(CompatibilityEditor.java:99)
    at org.eclipse.ui.internal.e4.compatibility.CompatibilityPart.create(CompatibilityPart.java:321)
    at sun.reflect.GeneratedMethodAccessor45.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
As it is not popular to post long logs unnecessarily, I will skip the rest of it for the moment - let me know if it could help and I will post it.
Thanks for help!
KR,
Igor

Hi Ponraj,
note applied without any problem.
I'm still facing some difficulties accessing a WD component, maybe you could suggest me how to solve/proceed:
in Eclipse Luna, I can access now a WD but "Layout" tab doesn't work - HTTP 403 Forbidden - Service cannot be reached. I guess it's a missing configuration, could you help me out on this?
EDIT: This one is solved; I just missed to activate a service in SICF (WDY_AIE_VD_PREVIEW).
That Eclipse module however seems not to be very stable; I tried to open a standard SRM WD view (wd component /SAPSRM/WDC_DO_SOCO_GAF_1, view V_AO_SOCO_GAF_1) and that resulted in the message:
500 SAP Internal Server Error
ERROR: Conversion of type C LENGTH 255 to type TABLE OF DEEP_STRUCTURE not supported. (termination: RABAX_STATE)"
is there a way, from the Methods tab, to access directly to a particular method's implementation? The only way I found is going manually under the IMPLEMENTATION tab and CTRL+F with the method's name.
is there any way to access to a particular enhancement made on the WD? Using SapGUI, there's a special "vortex" button to switch on a specific enhancement, but under Eclipse I can't find the alternative command.
I know we're getting a bit OT with respect to the topic, anyway if there's a guide that could help clarifying my doubts please, share that documentation
BR,
M.

Problem viewing Multiselect: "Error com.waveset.ui.web.applet.multiselect"

Hi,
I am getting this error whenever I try to show a form which has MULTISELECT fields in it.
"com.waveset.ui.web.applet.multiselect.class" not found. All other functionality is working fine.
The only thing I could make out is that there is a proxy(WEBSEAL junction) between web client and IDM server, I tried to edit BASE HREF in waveset.properties but still the problem persists. Can anyone provide solution for this problem?
-- ARK

IDM uses Java applets for the multiselect fields by default. It looks like it can't find the applet class for some reason. I'd check for the jars in the applet subdirectory where you deployed IDM. Specifically the ms6.jar file. It's possible they didn't get deployed right or that the proxy is eating them up on the way out. As an idea you might try directly accessing the jar file to see if the proxy is interfering. Something like a direct retrieval of http://example.com:8080/idm/applet/ms6.jar.
There's a way of using a javascript based multiselect field rather than the java applet. Unfortunately it involves editing each and every form that has a multiselect field in it and adding a property such as : <Property name="noApplet" value="true"/>. I really don't get why Sun decided to use a java applet when a standard HTML field works better and is more compatible with all the different browsers out there, but whatever.

Project Web App (PWA)/Sharepoint 2013: is there any way to display two different views of the Project Center PWA web part to the same user in a site collection?

i want some of my users to see all the projects in the Project Center at my top-level site, and those same users to see only the projects they own at a subsite level in Project Center. that way they could see an 'all project' view on the homepage and only
their projects on their dashboard pages (which also have an instance of Project Center web part on them). i have searched and searched but cannot find a solution to this. is there any way to acheive this functionality? thanks in advance for your assistance!

I have tried this in the past, but was not successful, as far as I can recall. Once you access the project center webpart in one page, the view will be retained regardless where you see it again. (until you apply a different view or clear your browser cache).
May be an easier solution is to display a 'report' on the home page with ALL projects (much easier to do), and use the Project Center webpart for the My projects view as it is easier to achieve via Project Server Security, than a report.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

How to view RMAN errors using v$views?

Hi,
From v$rman_status, i got the following output. But how to know what kind of errors throu v$views.
SID RECID STAMP PARENT_RECID PARENT_STAMP SESSION_RECID
SESSION_STAMP ROW_LEVEL ROW_TYPE COMMAND_ID
OPERATION STATUS MBYTES_PROCESSED
START_TIM END_TIME INPUT_BYTES OUTPUT_BYTES OPT OBJECT_TYPE OUTPUT_DEVICE_TYP
0 6540 734738844 6540
734738844 0 SESSION 2010-11-10 22:07:21
RMAN COMPLETED WITH ERRORS_ 0
10/NOV/10 10/NOV/10 0 0 NO
-thanks
Sakthi.

Hi Sakthivel
From v$rman_status, i got the following output. But how to know what kind of errors throu v$views. You need to query v$rman_output for the info.
first determine the session_stamp (or use the one from v$rman_status):
select distinct session_stamp
from v$rman_output order by session_stamp desc;Than use
select output from v$rman_output
where session_stamp like '&session_stamp%'
/to get the output of the rman session.
Rgds,
Tycho

List web part column alignment: how to change?

I have a wide list web part but all the three columns are aligned to left. So there is a huge white area on the right. Was it like this also in 2010? Can I change it so that the columns would be spread also to right?

Try these steps:
Open the page containing the list web part in Edit mode
Open the web part's settings panel
Set the web part's width as desired

Unable to view Report Filters on Excel Services web part

I have an Excel 2010 file with Pivot Charts. I want users to be able to select filters for the pivot charts to modify their chart/report as needed.
This excel file with Pivot Charts is visualized using Excel Services Web Part on SharePoint 2010.
My problem: The Pivot Chart Filters do not appear on SharePoint. They are available when the file is opened in Excel 2010.
Is there a way to have chart/report filters show up on SharePoint (excel services web part)?

As per the article below it seems that Pivot Chart Filtering is not available with Excel services. The article reads
"PivotChart reports are not interactive when displayed in a browser. You cannot filter a PivotChart report directly, but if you interact
with the PivotTable report that supplies data for the PivotChart report, the PivotChart report updates accordingly. This means if you filter the PivotTable report, the PivotChart report updates to show the filtered data set."
Unsupported Features in Excel Services
Though this article is for MOSS 2007 but if you read the following article for SP 2010 it reads "All other unsupported features continue
to behave as they do in Office SharePoint Server 2007 for Excel Services."
http://msdn.microsoft.com/en-us/library/ff595319(v=office.14).aspx
Amit

Access denied error while adding visual web part

i am trying to create visual web part using client side code in SharePoint 2013.
i am able to deploy my web part but when I try to add it on a page it says " Access denied. You do not have permission to perform this action or access this resource" and when i try to debug it it shows exception: "The remote server returned
an error: (500) Internal Server Error."
Following is the code:
protected void Page_Load(object sender, EventArgs e)
var ClientContext = new ClientContext("http://172.20.30.100:1111/");
//SP.ClientContext.get_current();
Web web = ClientContext.Web;
ClientContext.Load<Web>(web);
ClientContext.ExecuteQuery();
var BU = web.Title;
ListCollection ListColl = web.Lists;
List list = ListColl.GetByTitle("LNT_Testimonial");
CamlQuery CmlQry = new CamlQuery();
CmlQry.ViewXml = @"<View>
<Query>
<Where>
<Eq>
<FieldRef Name='BU' />
<Value Type='Text'>" + BU + @"</Value>
</Eq>
</Where>
</Query>
<RowLimit>1</RowLimit>
</View>";
Microsoft.SharePoint.Client.ListItemCollection items = list.GetItems(CmlQry);
ClientContext.Load<ListCollection>(ListColl);
ClientContext.Load<List>(list);
ClientContext.Load<Microsoft.SharePoint.Client.ListItemCollection>(items);
ClientContext.ExecuteQuery();
//var testimonial = items.FieldValues["testimonial"];
foreach (Microsoft.SharePoint.Client.ListItem item in items)
var testimonial = item.FieldValues["testimonial"];
regards, Ritesh Anand

I'm not sure if you are trying to create visual webpart or doing something else? As I understand from your code, maybe, you are trying to access list item. If you have access to the server (on-premise), you can check the ULS log for details of the error.
Is it access denied or 'internal server errror'. If it's internal server error then more details can be found in SharePoint ULS log. About reporting service, not sure if it's related to your original question. Please try to use a single post to focus on single
problem.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

Error occur when importing web part using Client Object Model API

i try to update webpart properties using Client API for some view and form pages. and the following error occured:
view: /sites/metadata des02/frank metadata library/Forms/Thumbnails.aspx
ERROR 03-06 05:36:47,720 Microsoft.SharePoint.Client.ServerException: The specified program requires a newer version of Windows. (Exception from HRESULT: 0x8007047E)
   at Microsoft.SharePoint.Client.ClientRequest.ProcessResponseStream(Stream responseStream)
   at Microsoft.SharePoint.Client.ClientRequest.ProcessResponse()
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb)
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQuery()
   at Microsoft.SharePoint.Client.ClientRuntimeContext.ExecuteQuery()
   at Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()
/sites/metadata des02/frank metadata library/Forms/Combine.aspx, ERROR 03-06 05:36:53,235 Microsoft.SharePoint.Client.ServerException: The specified program requires a newer version of Windows. (Exception from HRESULT: 0x8007047E)
   at Microsoft.SharePoint.Client.ClientRequest.ProcessResponseStream(Stream responseStream)
   at Microsoft.SharePoint.Client.ClientRequest.ProcessResponse()
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb)
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQuery()
   at Microsoft.SharePoint.Client.ClientRuntimeContext.ExecuteQuery()
   at Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()
/sites/metadata des02/frank metadata library/Forms/Upload.aspx,
ERROR 03-06 05:36:55,204 Microsoft.SharePoint.Client.ServerException: Exception has been thrown by the target of an invocation.
   at Microsoft.SharePoint.Client.ClientRequest.ProcessResponseStream(Stream responseStream)
   at Microsoft.SharePoint.Client.ClientRequest.ProcessResponse()
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb)
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQuery()
   at Microsoft.SharePoint.Client.ClientRuntimeContext.ExecuteQuery()
   at Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()
/sites/metadata des02/frank metadata library/Forms\EditForm.aspx ERROR 03-06 05:36:56,470 Microsoft.SharePoint.Client.ServerException: Exception from HRESULT: 0x80131904
   at Microsoft.SharePoint.Client.ClientRequest.ProcessResponseStream(Stream responseStream)
   at Microsoft.SharePoint.Client.ClientRequest.ProcessResponse()
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb)
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQuery()
   at Microsoft.SharePoint.Client.ClientRuntimeContext.ExecuteQuery()
   at Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()

Hi Ramakrishnaraja,
here is the code snippet:
using (ClientContext context = new ClientContext("https://frankkk.sharepoint.com/sites/metadata des02"))
context.Credentials = spoc as SharePointOnlineCredentials;
File webPartPage = context.Web.GetFileByServerRelativeUrl("/sites/metadata des02/frank metadata library/Forms/EditForm.aspx");
List list = context.Web.Lists.GetByTitle("frank metadata library");
LimitedWebPartManager limitedWebPartManager = webPartPage.GetLimitedWebPartManager(PersonalizationScope.Shared);
context.Load(webPartPage);
context.Load(limitedWebPartManager);
context.Load(limitedWebPartManager, manager => manager.WebParts);
if (list != null)
context.Load(list, l => l.Views.IncludeWithDefaultProperties(v => v.ViewFields.SchemaXml));
context.ExecuteQuery();

List view threshold error in list view web part, column indexing not working

Similar Messages

Maybe you are looking for