Listner and "Message not Found" Error
I tried to find other info on this, but i couldn't, so any
information would be very helpful.
whenever i run:
lsnrctl start
i get these errors:LSNRCTL for Linux: Version 8.0.5.0.0 -
Production on 17-AUG-99 22:58:55
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Message 1070 not found; No message file for product=NETWORK,
facility=TNSTNSLSNR for Linux: Version 8.0.5.0.0 - Production
NL-00280: Message 280 not found; No message file for
product=NETWORK, facility=NL [listener.log]
NL-00278: Message 278 not found; No message file for
product=NETWORK, facility=NL
SNL-00016: Message 16 not found; No message file for
product=NETWORK,
i used the default listener.ora and tnsnames.ora that were
installed.
thanks for any help,
-- adam
null
Thank you so much!!!! that was the problem. i could have sworn i
set up my "oracle" account properly, but i didn't. this will
probably fix any other problems i was going to have also...
thank you very very much,
-- adam
Michael Tokarev (guest) wrote:
: Set and export ORACLE_HOME env. variable.
: Adam (guest) wrote:
: : I tried to find other info on this, but i couldn't, so any
: : information would be very helpful.
: : whenever i run:
: : lsnrctl start
: : i get these errors:LSNRCTL for Linux: Version 8.0.5.0.0 -
: : Production on 17-AUG-99 22:58:55
: : (c) Copyright 1997 Oracle Corporation. All rights reserved.
: : Message 1070 not found; No message file for product=NETWORK,
: : facility=TNSTNSLSNR for Linux: Version 8.0.5.0.0 - Production
: : NL-00280: Message 280 not found; No message file for
: : product=NETWORK, facility=NL [listener.log]
: : NL-00278: Message 278 not found; No message file for
: : product=NETWORK, facility=NL
: : SNL-00016: Message 16 not found; No message file for
: : product=NETWORK,
: : i used the default listener.ora and tnsnames.ora that were
: : installed.
: : thanks for any help,
: : -- adam
null
Similar Messages
-
Problems with cached previews and File Not Found errors in preview and build
I am having serious issues with Encore CS5.
When I try and build a preview or disk/image I am getting File Not Found errors. I have emptied the media cache in the preferences but my project still seems to be referencing previously cached files or rendered menus. Is there any way to manually delete previous previews or the cache. I know that there are no missing files in my project. Any help would be very much appreciated.
I am running Mac OS 10.6.4 and Encore 5.0To fix your locales, see http://wiki.archlinux.org/index.php/Configuring_locales -- in specific, you'll need to uncomment the en_US.utf8 locale at least, since that's the one that's specified in your rc.conf
-
Lsnrctl start/stop "message not found" errors
When I installed 10g I selected a global database name of 'orcl.clearbean.com' and a sid of 'dev1'. Below are my environment variables, tnsnames.ora file and listener.ora file. I can connect and use the database, but I am getting errors messages when I do a lsnrctl stop/start. I am running Oracle and Apache together on a server running Fedora Core 4 (linux). Any help would be greatly appreciated.
Supporting information:
[oracle@emerson ~]$ env | grep ORA
ORACLE_SID=dev1
ORACLE_BASE=/u01/app/oracle
ORACLE_TERM=xterm
ORACLE_HOME=/u01/app/oracle/product/10.1.0/db_1
[oracle@emerson ~]$ cat $ORACLE_HOME/network/admin/tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = emerson.clearbean.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.clearbean.com)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
[oracle@emerson ~]$ cat $ORACLE_HOME/network/admin/listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = emerson.clearbean.com)(PORT = 1521))
[oracle@emerson ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.1.0.2.0 - Production on 07-OCT-2005 01:19:22
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Message 1053 not found; No message file for product=network, facility=TNSTNS-12541: Message 12541 not found; No message file for product=network, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
TNS-00511: Message 511 not found; No message file for product=network, facility=TNS
Linux Error: 2: No such file or directory
Message 1053 not found; No message file for product=network, facility=TNSTNS-12541: Message 12541 not found; No message file for product=network, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
TNS-00511: Message 511 not found; No message file for product=network, facility=TNS
Linux Error: 111: Connection refused
[oracle@emerson ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.1.0.2.0 - Production on 07-OCT-2005 01:19:30
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Message 1070 not found; No message file for product=network, facility=TNSTNSLSNR for Linux: Version 10.1.0.2.0 - Production
Message 459 not found; No message file for product=network, facility=NL
Message 279 not found; No message file for product=network, facility=NL
Message 1073 not found; No message file for product=network, facility=TNSMessage 1073 not found; No message file for product=network, facility=TNS
Message 1053 not found; No message file for product=network, facility=TNSMessage 1020 not found; No message file for product=network, facility=TNSMessage 1021 not found; No message file for product=network, facility=TNSMessage 1022 not found; No message file for product=network, facility=TNSMessage 1023 not found; No message file for product=network, facility=TNSMessage 1026 not found; No message file for product=network, facility=TNSMessage 1034 not found; No message file for product=network, facility=TNSMessage 1024 not found; No message file for product=network, facility=TNSMessage 1025 not found; No message file for product=network, facility=TNSMessage 1040 not found; No message file for product=network, facility=TNSMessage 1033 not found; No message file for product=network, facility=TNSMessage 1028 not found; No message file for product=network, facility=TNSMessage 1415 not found; No message file for product=network, facility=TNS Message 1050 not found; No message file for product=network, facility=TNS
Message 1050 not found; No message file for product=network, facility=TNS
Message 1029 not found; No message file for product=network, facility=TNSMessage 1411 not found; No message file for product=network, facility=TNS
Message 1408 not found; No message file for product=network, facility=TNS
Message 1052 not found; No message file for product=network, facility=TNS[oracle@emerson ~]$Thx for the feedback; however after defining TNS_ADMIN and turning of the firewall I am still getting the message errors. Any other suggestions?
[oracle@emerson ~]$ ls $ORACLE_HOME
admin emerson.clearbean.com_dev1 ldap oraInst.loc sqlj
assistants flash_recovery_area lib ord sqlplus
bin has md oui srvm
cdata hs mesg owm sysman
cfgtoollogs install mgw perl uix
config install.platform network plsql ultrasearch
css inventory nls precomp wwg
ctx javavm oc4j racg xdk
dbs jdbc olap rdbms
demo jdk OPatch relnotes
diagnostics jlib opmn root.sh
dm jre oracore slax
[oracle@emerson ~]$ ls $TNS_ADMIN
listener.ora samples sqlnet.ora tnsnames.ora.orig
listener.ora.orig shrept.lst tnsnames.ora
[oracle@emerson ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.1.0.2.0 - Production on 07-OCT-2005 22:43:44
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Message 1053 not found; No message file for product=network, facility=TNSMessage 1052 not found; No message file for product=network, facility=TNS[oracle@emerson ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.1.0.2.0 - Production on 07-OCT-2005 22:43:51
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Message 1070 not found; No message file for product=network, facility=TNSTNSLSNR for Linux: Version 10.1.0.2.0 - Production
Message 459 not found; No message file for product=network, facility=NL
Message 279 not found; No message file for product=network, facility=NL
Message 1073 not found; No message file for product=network, facility=TNSMessage 1073 not found; No message file for product=network, facility=TNS
Message 1053 not found; No message file for product=network, facility=TNSMessage 1020 not found; No message file for product=network, facility=TNSMessage 1021 not found; No message file for product=network, facility=TNSMessage 1022 not found; No message file for product=network, facility=TNSMessage 1023 not found; No message file for product=network, facility=TNSMessage 1026 not found; No message file for product=network, facility=TNSMessage 1034 not found; No message file for product=network, facility=TNSMessage 1024 not found; No message file for product=network, facility=TNSMessage 1025 not found; No message file for product=network, facility=TNSMessage 1040 not found; No message file for product=network, facility=TNSMessage 1033 not found; No message file for product=network, facility=TNSMessage 1028 not found; No message file for product=network, facility=TNSMessage 1415 not found; No message file for product=network, facility=TNS Message 1050 not found; No message file for product=network, facility=TNS
Message 1050 not found; No message file for product=network, facility=TNS
Message 1029 not found; No message file for product=network, facility=TNSMessage 1411 not found; No message file for product=network, facility=TNS
Message 1408 not found; No message file for product=network, facility=TNS
Message 1052 not found; No message file for product=network, facility=TNS[oracle@emerson ~]$ -
Integrating Google Maps in Oracle Apex and 404 Not found error page
Currently using APEX version 3.2.0.00.27 installed in OracleXE version 10.2.0.1.0. Have been attempting to recreate some examples of Google Maps within APEX. Found a nice set of examples here that build up to what I'm looking to ultimately do by incorporating google maps into APEX:
http://blog.whitehorses.nl/2009/10/04/integrating-google-maps-in-oracle-apex/
Unfortunatly, I'm getting the "404 Not Found, Not found, The requested URL /apex/wwv_flow.accept was not found on this server" page when I try to recreate the "Map with Search" example. I'd like to see if this really works using the html input and button tags in the body/region source versus creating APEX items to pass the address values to the javascript in the html header of the apex page. I'm thinking it's just an html thing within APEX that you have to do it a certain way, but I haven't managed to hit that magic combination. have gone to the google maps api v2 and looked at the html they use (it's what these examples with apex are based on) and tried that just to see. Same 404 result.
I've seen suggestions at this forum and elsewhere that the 404 error is due to a bug. have been to metalink, and really haven't seen anything that spells out what the bug is and how to patch it or work around it. May be I just haven't found the right note/doc yet. have seen suggestions to change something associated with the Anonymous account that APEX uses. Have turned on authentication in the application to use an APEX user account with a logon page to the application. Still get the 404. Although, I have not adjusted anything elsewhere, like a DADS config file, because the apex/xe configuration is using the plsql gateway. Not sure of any procedure for changing settings on anonymous account when using plsql gateway.
Open to suggestions. APEX 3.2 is customer version, so going to 4 may not be an option yet. XE, on the other hand, can certainly be swapped for an 11g version standard or enterprise edition if need be. I don't think this is a db version problem though. I think it's more on the APEX side of things.
Anyway, any help or suggestions are appreciated.
thanks
rtp
Edited by: RTP on Jun 24, 2011 10:30 AMHi I have the same problem.... if you found the solution, please put it here to see it... I need a solution to this its urgent!!
Thanks!! -
Locale and "file not found" errors in pacman
Hello. I have just reinstalled Arch on my system (yes, wanted to start all again!) and this weird error happens every time I try to do anything under pacman:
warning: current locale is invalid; using default "C" locale
resolving dependencies...
error: could not open file /var/lib/pacman/local//wget-1.10.2-2/depends: No such file or directory
...and the last line repeats itself many times. After that, pacman works just fine.
If it might help, here is my pacman.conf:
# /etc/pacman.conf
# See the pacman manpage for option directives
# GENERAL OPTIONS
[options]
LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
#[testing]
#Include = /etc/pacman.d/testing
[current]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/current
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/extra
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/community
#[unstable]
# Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/unstable
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
...and here is my rc.conf, if that might help:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="America/SaoPaulo"
KEYMAP=br-abnt2
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=(mii sis900 slhc via-rhine ac97_bus snd-mixer-oss snd-pcm-oss snd-page-alloc snd-pcm snd-timer snd snd-ac97-codec snd-intel8x0 soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="celso-arch"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
# interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
#eth0="eth0 192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond)
# End of file
Just let me tell that the only thing I did after the actual install is "pacman -Syu". Sorry, I have no clue about what's happening. Any help would be appreciated.To fix your locales, see http://wiki.archlinux.org/index.php/Configuring_locales -- in specific, you'll need to uncomment the en_US.utf8 locale at least, since that's the one that's specified in your rc.conf
-
ORA 12514 - Message not found ERROR
I have just installed Designer 6.0 on Win98 ... I have set my tnsnames.ora and it looks as though I can connect because I can use tnsping but I get the error when trying to connect through Designer ....
Please help ... the DB is 8i.
Thanks
David
null<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Martin ():
Hi,
See http://www.chow1.myweb.nl for "setup instructions"
HTH
Martin<HR></BLOCKQUOTE>
Martin -
I am trying to run Designer 6.0 to read/update a designer repository that is already setup on another machine. I just need to be able to talk to the Designer machine remotely. Does your setup include that?
Thanks
David
null -
A user was deleted from AD, of course this generated an e-mail after the UPS sync ran notifying the manager of the user that their MySite will be deleted. The manager just told me she gets a "User not found" page when she clicks the link. It has
not been 3 days since she got the e-mail so the site should not be deleted yet.
What to do?
Thank you!!Hi,
According to your post, my understanding is that you wanted to
During the first incremental synchronization after the accounts are deleted from AD, the user profiles will be
marked for deletion in the Profile database.
The profiles still exist in the Profile DB and are a simply marked for deletion.
In order to actually delete the profiles, we must run the
My Site Cleanup Timer job. This job will purge the profiles marked for deletion.
The My Site Cleanup Timer Job runs by default once per hour. If the user do have a My Site, the My Site is queued for deletion, an email is sent to the user’s manager, and the user profile is deleted. If the user does not have a My
Site, then their profile is simply deleted.
Check the manager’s inbox, and we see two new emails that let us know the My Site is going to be deleted in 14 days.
Click the link in the email, and we see that we now have access to the My Site. We are logged in as manager, but accessing the deleted user’s personal site. Note also that we have access to the Shared Documents as well as the
Personal Documents folder for the user.
There are some great articles for your reference, although it is about the SharePoint 2010, it still works for SharePoint 2013.
Account Deletion and SharePoint 2010 User Profile Synchronization
Inside the SharePoint 2010 My Site Cleanup Timer Job
My Site Cleanup Job and "user not found" error message in SharePoint 2010
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Ok so I went to update my itunes 9 to itunes 10.5 and now I get and error message "Apple application support was not found" error 2 (windows error 2) when ever I try to run itunes and iv been trying to fix this for like a month and let me tell you iTunes for windows is **** and I really want Icloud for my iphone 4 and yes iv tried uninstalling everything by apple in the correct order and reinstalling them after restart atleast honestly 20 - 30 times but nothing worked so if anyone can please help me I have windows 7 and a hp intel pentium computer
Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2 -
Trying to track a package on FedEx website and get "Framework Not Found" error message
Either by clicking on the email from FedEx and launching Firefox or by opening the FedEx website and entering the tracking number, I get "Framework not found" error and the search stops. It worked with previous Firefox versions but not with the new 4.0.1 version. Any suggestions?
I tried it with firefox and chrome and have the problem in both browsers, so it is not browser specific.
-
File not found error 43 message. What is this?
I transferred a project to a friends logic and everything transferred fine except for the fact that every time we start the tune we get the notification: File not found, result code = -43. After we click through the first error code window another pops up and it says: Fade update failed, (error -43).
It is no big problem except for the fact that these come up every time we hit play. Then after we click through the error messages the song works perfectly.
Any ideas?
ThanksHi,
I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
DS -
"Not Found" Error Message Problem
Hi All!
I have a really weird issue happening that I have not found a post for in the boards, although there are some similar ones. I have a video project that I had been working on about a month ago and finished except for credits (I had no problems while working on it then). I finally just got the list of names to use for the credits, so I went to open the project to add the credits and I got a "Not Found" and "Out Of Memory" Message. I have 134.6 Gigs open on the Raid I save everything to, so I know I'm not actually out of memory. So I changed the settings to 80% Application and 50% Stills b/c I have around 10 jpegs I was using for titles in it. That seemed to help at least get the sequence opened. I then had media offline messages for those titles, eventhough they are in the browser and defined as online, so I just reconnected each one individually anyway. That helped with that problem. However, I FCP won't render the transitions around the titles. I deleted the transitions and titles and tried to re-render the video clips that were involved in the transitions with the titles. It won't render those. When I try to view the clips in the viewer, I get the "Not Found" message again. I reconnected a couple of the video clips individually, but I still get the message when I try to view them in the Viewer. The clips in the sequence are there and play in the canvas but not in the viewer and I get the "Not Found" message. I have it set to view the image without wireframes, so that's not the problem. The source videos are read as online in the browser and are in the same place as they were when I originally started the project, so that's not the problem. I've tried different variations on the memory usage. I've tried copying and pasting to a new sequence but get the same problem. Does anyone know why all of a sudden I can't view any of my source video and the clips I used in my sequence in the viewer and why it would give me the "Not Found" error message?
Some Specs that might be helpful:
FCP HD 4.5
Dual 2 GHz PowerPC G5
2.5 Gigs DDR SDRAM
Raid 1 with 134.6 Gigs Available Space
SD NTSC DV Footage - MPG files I transfered originally from the client's portable hard drive
A Few JPGs of Photoshop Titles
I'm sorry this is insanely long, but I wanted to provide as much detail as I could.
EmilyThey were originally on a PC. That quite possibly could be it.
I just checked all the titles again and they are all RGB.
Our Raid ocassionally has problems, so I'm thinking it might have something to do with that.
I'm going to try on Monday to just re-import the videos I need into the project and see how that goes. If anyone has any suggestions, I'll take a look on Monday and see what happens.
I was just hoping that someone might have had this problem and knew what to do.
Thanks for your help! -
TS1544 "keychain not found" error messages pop up all the time, please help!
Hi, Ive been constantly getting "keychain not found" error messages ever since i updated to OS X and cant sync messages, facetime, calendars etc. i've tried keychain first aid and get this message:
Verification started
Checking keychain configuration for Lee (user ID=501)
Home directory is /Users/Lee
Checked login keychain
Error: login keychain not found
Unable to get info for ~/Library/Keychains/login.keychain, reason: The operation couldn’t be completed. No such file or directory
Checked default keychain
Checked keychain search list
Problems were found; you should choose the Repair option to fix them
Verification failed
Can anyone help?
ThanksIs there a login.keychain in /Users/username/Library/Keychains/? The message says not. If not, create a new one or restore the one residing in your bootable backup/clone or Time Machine backup.
-
I am trying to install itunes on my computer (Windows Vista). After initial instillation I got an error 42404 A required itunes componenet is not installed; please repair or re-intall itunes and error 50, cannot access itunes store at this time. Please try later. I have done that multiple times; uninstalled all components, reinstalled all components, repaired all components, restarted my computer. I have changed firewall settings to allow acess to all of the apple components. I have made sure the required ports are open. All of the components are showing on the installed programs section of my control panel.
I am now getting an error message that says that Apple Support Application is not found error 2 (windows 5). It is listed in the installed programs and I have repaired it.
I am out of options. And help would be appreciated.'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
SXMB_MONI : Error in Persistence Layer : XML Message Not Found
Hi Team,
There are some messages in our Production system and is in Scheduled state in SXMB_MONI and when we try to re-process those messages, we are getting message : Error in Persistence Layer and when we double click on message, we are getting the error : XML Message Not Found.
Any help on this is highly appreciated.
Thanks & Regards,
C V JayachandraHi,
Please refer the below discussion
SXMB_MONI - Error accessing persistence layer
regards,
Harish -
Brrestore give error termination message not found
Dear all
i have try to restore offline backup to test system bcaz while database upgrade it got crashed it shows error ora-01157 and ora-01110 i have the backup of system
while i am trying to restore the backup it throws error terminated message not found d:\oracle\SID\sapbackup\beojggvh.afd log file incomplete
i used following command
brrestore -b beojggvh.afd -m full -c
i copied backSID.log and beojggvh.afd file from offline backup folder to target system /oracle/sid/sapbackup suggest i went wrong
i am on windows
RegardsHi,
Share the complete error log file and make sure data file using for restore should be a successful one complete offline backup.In addition share alert_<SID>.log file also.
Regards,
Gaurav
Maybe you are looking for
-
I just got my new MacBook Pro over the weekend, and was sooo excited. I wanted it to take back and forh to work with me. However on a website I use for work, I need to be able to upload files and pictures. but the area where the link/button "Browse"
-
when downloading video files by the ( internet download manager) most of times the file name downloaded as ( video playback ) instead of actuly name of the files please let me know how to solve such problems?
-
My iMovie is not responding any suggestions
My Imovie is not responding...any suggestions
-
Setting to open folders in new folders
Upgraded from SL to Mavricks. In SL, there was a preference to open folders in new folders instead of replacing the current open window. Did that go away as an option in Mavericks?
-
Someone got same number as me how do I change it as don't want to get a new SIM plz help I am Fed up of calls for this lass I don't know thanks xxx