Live instruments are not recording...microphone works

i cant figure this out. please help.
i am getting so frustrated.
thanks

My impression is that the likiehood of recording failures increases significantly with those series record recordings scheduled well in advance where the timing/content of the program episode is revised in the EPG. Typically the sports channel programmes are most likely to fall into this category but other entertainment channels particularly those showing several different series of a tv show can in my experience cause issues.

Similar Messages

Windows Live Tiles are not working and refreshing

Hello,
I have looked for an answer but can't seem to find one so this is honestly my last resort. For some reason my Windows live tiles are not working nor refreshing. When I open my Netflix app for instance I get a playback error N8102, but I am strangely connected
to the internet. Oddly, however, Netflix does work well using firefox on the desktop.
I tried to check if I needed an app update for Netflix, but the Windows app store is not loading as well. Internet explorer app is not working, and IE on the desktop is taking too long to load. But firefox and chrome work perfectly well on the desktop.
Other problems that I have encountered are:
Microsoft Office 2013 is taking too long to open, and when it does it often crashes
I can't view my Windows Updates
Can't view control panel. It also crashes.
I am not sure what the problem is.

Hi GBell101,
Here I list these issues：
1. Windows Live tiles are not working
2. Netflix app not working error code N8102
3. Can’t open windows app store
4. Windows office 2013 often crashes
5. Can’t view Windows updates and control panel
Please share us more information for better analyzation:
1. What changes had you made before you met these issues?
2. Do you receive other error messages or code?
3. Do you mean we can’t open Windows updates and control panel or can’t find them?
Please take the following steps for troubleshooting:
1. Install Silverlight on the computer and check if the Netflix issue persists.
2. Run the app troubleshooter, for more information, please refer to the following article.
http://windows.microsoft.com/en-us/windows-8/what-troubleshoot-problems-app
3. If the issue exists, we could conduct the system restore to restore Windows to a earlier point in time.
http://windows.microsoft.com/en-us/windows-8/restore-refresh-reset-pc
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

I have downloaded an ical subscription. It appears on the sidebar as checked, but the data (holidays) are not recorded in Ical. I tried re-downloading, but the same problem exists.

I have downloaded an ical subscription. It appears on the sidebar as checked, but the data (holidays) are not recorded in Ical. I tried re-downloading, but the same problem exists. Can you assist?

drjil,
It is possible that the subscription is not valid or up-to-date.
If you are looking for U.S. Holidays, here are three alternative choices besides Apple - Downloads - iCal Calendars - US Holiday Calendar.
1. Welcome to iCalShare
2. iCal World - Holiday Calendars by Country
3. US Federal Holidays, ICS format, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015.

Images are not loading - but work in Preview mode

Hi -
I was wondering if anyone can help me. I'm kind of new to Dreamweaver and I can't seem to figure this out on my own.
I'm using Dreamweaver 8. I developed a web page based on a template in which everything works perfectly in "Preview" mode on all browsers. But when I uploaded the files to my remote hosting, the template based images (found in the "images" folder) are not loading on the page. The images that I added to the template myself, found in the same "images" folder ($200,000 in ..., and picture at bottom) are loading. So some of the images in the images folder are loading some are not.
I've checked the Images folder on the remote site, and they all seem to be there. I've also checked for broken links, and I'm not getting any (I don't know if that would help w/ missing images or not, but I'm trying everything I can think of). I also checked to see if there is a separate CSS style sheet, and there wasn't one supplied with the template (there is some CSS info in the code on the html page). The image sizes are all small enough as well. Can anyone help me with this?
You can view one of the pages at: http://www.200kin5months.com/squeeze-video.html
Thank you in advance to anyone who might be able to help!
Stacey
PS - I've attached a screenshot from Dreamweaver Preview to show what it is supposed to look like.

Your Web server is running on an operating system that is case-sensitive. You appear to have uploaded an Images folder, but not an images folder.
You do not have a file here:
images/squeeze-video_425x344_r9_c6.jpg
But you do have a file here:
Images/squeeze-video_425x344_r9_c6.jpg
So you'll need to either change all your image/<whatever> links to point to Images/<whatever>, or upload another folder named images.
Or, if you want to use a single folder, and if your local file system is not case-sensitive, you might be able to do it in DW's file panel. Here is a method that you might use to have all of them in a folder named images.
BACK UP YOUR SITE FILES
Rename Images to Foo (allow DW to update links)
Rename Foo to images (allow DW to update links)
Upload the images folder and any/all files that DW changed
Delete the online Images folder
HTH
Mark A. Boyd
Keep-On-Learnin' :-)

Reports on 11 x 17 paper are not outputting correctly, worked 2 days ago no changes made

Post Author: sgrot
CA Forum: crystalreports.com
Reports that were written to output to 11x17 paper are no longer outputting to the browser window or .pdf correctly. These reports were working fine until 2 days ago. No changes have been made to the source files and the result is the same across multiple reports.

Post Author: sgrot
CA Forum: crystalreports.com
These reports are scheduled. I don't believe it is new data messing up the alignment for two reasons:
1. I can run the same report with the same data in Crystal Reports XI and the formatting is correct.
2. All of my 11 x 17 reports were affected and they are not reporting the same data.
The problem, like most I experience with CR.com went away a day or two after I posted the issue.

User changes in tab strip ui element are not recorded in context change log

Hi All,
We are using a tab strip ui element in webdynpro component. But user changes inside tab strip ui element are not getting recorded to the context change log. I have an input field on the same view besides tab strip ui element. User changes to this input field are getting recorded to the context change log.
Is there any restriction on context change log usage with tab strip ui element?
Could you please suggest If there is any way to record changes inside tab strip ui element.
Thanks,
Sudheer.

I think there are some limitations exists, context change logs are not complete when you do value help , i am not sure about tab strip.
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm]

Adobe Live Effects are not supported 100%. Why?

Using FW CS3 for Web designs.
As most of you know, you can implement some Photoshop Live
Effects inside FW CS3 but not 100%.
I am curious why?
For example, in FW CS3, when I try to implement "Satin"
effect to a button, my preferences are limited compared to Photosop
version. In Photosop you can select a preset contour and you can
change the blend mode. But in FW you can only change angle,
distance, color, size and opacitiy.
And same thing goes for other effects. They don't have same
options, and they don't create same effect with PS CS3.
I am asking this because I used strictly FW for my Web
designs, but now I see that I can create much cooler buttons in PS
CS3, which is mainly a photo editor :/
Is there any way to make it 100% PS compatible?
Thanks.

On Fri, 14 Sep 2007 07:30:24 +0400, DeadManWalking
<[email protected]> wrote:
> Using FW CS3 for Web designs.
> As most of you know, you can implement some Photoshop
Live Effects
> inside FW
> CS3 but not 100%.
> I am curious why?
>
> For example, in FW CS3, when I try to implement "Satin"
effect to a
> button, my
> preferences are limited compared to Photosop version. In
Photosop you can
> select a preset contour and you can change the blend
mode. But in FW you
> can
> only change angle, distance, color, size and opacitiy.
>
> Is there any way to make it 100% PS compatible?
Based on the timing, I suspect that development of FW CS3 was
started
before Adobe and Macromedia merge. So the fact that they are
not 100%
compatible does not look surprizing to me. Probably it will
change in the
future. Take into account that PS and FW are rather big
projects, they
cannot be fully re-coded in a minute.
Ilya Razmanov
http://photoshop.msk.ru -
Photoshop plug-in filters

Why does the menu look grayed out? ("File, Edit, View, History" etc) It makes them look like they are not going to work. They don't turn black if I click on them either.

Normally, at least in most Windows programs, and I think other OSes too, items that can be used are black, and items in gray are inactive so that they are not available. It's disconcerting to see the menu in gray, even though they work.

Hi Melaniefromnorth saanich,
Take a look at the Photos User Manual below. Is it possible you were deleting photos from an album and not from your library?
Delete photos and video - Photos Help
https://help.apple.com/photos/mac/1.0/index.html#/pht3bfab2f96
Delete photos and videos
Do one of the following:
Delete a photo from an album, but not from your library: Select the items you want to delete, then press Delete.
Delete a photo from a moment (placing it in the Recently Deleted album): Select the items you want to delete, press Delete, then click Delete.
Delete a photo from a moment or album (placing it in the Recently Deleted album): Select the items you want to delete, then press Command-Delete.
Deleted photos and video aren’t immediately removed from your library; they’re placed in the Recently Deleted album, where they remain for the number of days shown, and then are deleted. You can recover the items before that period of time (see the next task). If you have iCloud Photo Library turned on, the photos may remain in iCloud up to 40 days and then are removed from all your devices that use iCloud Photo Library. If you’re not using iCloud Photo Library, your deleted photos are removed from your Mac only.
Restore recently deleted items
Deleted items remain in the Recently Deleted album for the number of days shown, and then are deleted permanently. You can view recently deleted items and restore them back into your Photos library.
Choose File > Show Recently Deleted.
Select the photos you want to restore.
Click Recover.
To delete recently deleted items immediately, select the items, then click Delete.
If you use Time Machine to back up your computer, you may be able to recover items after they are deleted permanently from your Mac or iCloud.
For more information on using Time Machine, see Restore a Photos library from a Time Machine backup.
Hope that helps,
- Judy

Why is Logic is saying that instruments are not found?

Logic is saying that instruments such as pop horns and several others are not found, could somebody please tell me how to fix this? I currently have Logic 9 express. Any help would be greatly appreciated.

Hello there, mordway.
The following Knowledge Base article offers up some great recommendations for the issue you're describing:
iPhone: Compatibility message appears when connected to a 'Made for iPhone' accessory
http://support.apple.com/kb/ts1505
The iPhone dock connector is free of any debris.
The "Made for iPhone" accessory's connector is free of debris.
The iPhone is securely connected to the accessory—that is, it is not sitting crookedly within an iPhone dock and making only partial connection.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Iweb with Lion: Umlaute after ftp-upload on linux-Server are not correct - but worked with Leopard!

Hi from Germany. I used iweb 3.04 and OS X 10.6+ and everything worked fine on different websites, including German Umlaute ä, ö, ü, ß.
After upgrading to Lion all Umlaute are not correct spelled (strange letters) after ftp-upload on a linux-server (which is the same as before). Before upload these Umlaute are spelled correctly, but not after upload.
Trials were a) upload htaccess file b) use older iWeb 3.03 c) asking server administrator (answer: "use ae, oe, ue instead"), but nothing worked.
Any ideas or help?
Thank you very much, and excuse my english
Peter

The problem lies in the uploading of the files or the server itself. If the umlautes looked good on the server before then we have to think it's the uploading process. Try using the free FTP client Cyberduck to upload your site folder to your server. Then check to see if the rendering is correct.
What's the URL of your site so we can examine it first hand?

Scheduled series are not recording

About 2 weeks ago I noticed that some of my scheduled series (record new only) were not being recorded. After checking that there were no programming conflicts I manually programmed the following week's episode, and when I tried to program it as a series I received the message that the series was already programmed, so i chose to just record that episode. Now I have to manually record these series. What's up?
This is happening with the new season of Parenthood, Revolution and Top Chef. Does anyone know why this is happening?
Solved!
Go to Solution.

Are you sure the programs you are trying to record are brand new (meaning they have never aired before). You may want to change the setting to "new and repeats". This setting will make sure each episode will be recorded, even if the system is not sure if it is a re-run or a brand new episode, but it will not record duplicate episodes.

Some software instruments are not working when midi controller is plugged in for logic pro x

So I have made a track and I have been using my midi controller. Some instruments work when i record on the track. But if i change to some other instrument i.e. the vintage organs, then it won't work. I have bypassed all control surfaces and it still hasn't worked.

Some of the vintage organ patches use different Midi channels.....other than Chan 1 for other registers... Example Chan 3 might be used for the pedals... and Chan 2 might be used for the lower keyboard/register of the organ...
Check your keyboard to see what Midi channel it is actually transmitting on and set it accordingly....

Since I upgraded to os 7 my voice memos are not recording and syncing with Itunes.

In the app the recordings show 0 time and when I sync with Itunes there is no recording listed at all. Any thoughts?

I found the answer, at least it worked for me.
Here ya go:
1) open the Voice Memos app on your iPhone
2) on any memo: click the little blue arrow on the right
3) Click the next arrow in the top most box this will put you in the "Label" screen
4) From the "Label" screen: click the arrow next to "Custom"
5) In the Custom screen: give the memo a name (click Done)
6) Click the left arrow (top left) to go back to your memos.
You'll see that you memo as a name. I changed mine from "4:25 PM" to "Fishcakes".
7) Sync your iPhone and you are good to go.
NOTE: If for some reason this doesn't work, go back into the same "naming" list on your Iphone voice memos app, and try one of the standard labels instead of a custom one. With one that wouldn't sync, I changed it to "Memo" and then synced it again, and then it worked.

Glitches from recorded instrument and NOT recorded mic??

Okay, I know this has been a standard concern. Clicks, pops, "glitches" in recording. However, I have been using Logic Pro 8 for about 7 months and have just now encountered this issue. I have recorded multiple track recordings with my mic input many times before. I have used up to 12 different tracks of audio recordings from my mic. My project has always played back with no issues whatsoever. Yesterday I was for the first time recording a bass guitar. I began having glitches in the recording. It got really bad to the point i had to restart Logic. I upped the I/O buffer size from 128 to 256 and that helped a little. I stilled had a crackle here and there. I know it was not being recorded because on playback i can play the same part over again and not here the crackle in the same spot. Why is my recorded bass track giving me crackles when I have had up to 12 tracks of audio recorded from my mic with up to 24 different audio regions, all tracks with several plugins and never once had this issue. I am having this issue with my 2 audio tracks of recorded bass. NO plugins. I do not have more software instruments than normal either. I have tried adjusting my buffer size to many different settings, anything below 256 causes a "system overload" error after a minute or so. Anything up to the max 1024 still gives me "crackles". Here is my system and settings I normally have on default........
iMac 24" 2009
Mac OSX 10.5.8
2.66 GHz intel core 2 duo
4 Gb 1067 MHz DDR3
Disk: recording to iMac internal Drive 1TB, have around 600 GB free
Recording Hardware:
Apogee Duet via FW port on iMac
Logic Settings:
Logic Pro 8.02
I/O Buffer Size:128 (What I have always used)
I/O Safety Buffer: Not checked
Recording Delay:0
Universal Track Mode: Checked
24 Bit Recording: Checked
Software Monitoring: Checked (Have tried without)
Independent Monitoring Level:Checked
Process Buffer Range: Medium ( Have tried both other options, small and large)
Recording file type:AIFF
Project Sample Rate 44.1
I hope I have given enough info for some helpful input, THANKS IN ADVANCE
Logic Audio Setttings

nope not yet. I'm going to go home and try a few things, first i'm going to REstart my computer. I'm going to compare different projects to the one i'm having issues with. Make sure it is just specific to the project. If not, then I have something more serious happening that is now affecting projects that were fine in the past. Then I will also see about using Logics Duet mixer as opposed to Maestro. Also, BIGGY< i need to see that the crackling is still there in the tracks when playing through the Built in Audio. This will help distinguish if this is hardware based issue or not. And although i think i'm current, i'm going to double check and reisntall the newest DUET driver. IF these other things don't work. I'm just at work so i haven't been able to really get under this problem yet. BUt i've gotten good ideas on what to try.

Polish characters on print preview are not correct, printing works well

Hi gurus,
i've got a problem with smartform print preview. Our programmer developed form, which is used in polish and english version. In polish version everything works fine - print and print preview has polish characters (ąłćźń etc). In english version, print preview has no polish characters in address paragraph, but when I print it, everything is on his place.
Unfortunetly, system is non-unicode. I tried changing font to other (but in polish version with the same font, print preview is correct), changing size, even charset of printer. Works badly on I2SWIN, HP-PCL, and any other printer type.
What should I do now? Removing polish letters or changing them into "normal" is not acceptable solution, especially that printing works fine (on I2SWIN and HP PCL type also).
Polish is of course installed on the system.
Thank you for your help.
SAP ECC 6.0
SAP_AP 700 013

Hi Martin,
another thought to solve the issue is to translate the form to pl in your system. I got a similar issue some time ago.
I developed the form in DE and translated it just to English, because we wanted to set always English.
Problem was, that french characters didn't show up in a proper way in print-preview. We solved the issue by translating the form also in FR and IT.
It seemed, that the formlanguage passed just the native charactersets for this language.
Maybe you are having the same issue. Otherwise would be nice, if you can share your solution if there is another one here
~Florian

Live instruments are not recording...microphone works

Similar Messages

Maybe you are looking for