LIVE workspace is missing... or is it? [9.2.0.6.0]

Dear all
Under Workspace|Workspaces in Enterprise Manager I expect to see "LIVE". This is the case for all my databases except one, which I'll call "AAPSD". Under AAPSD there are no workspaces listed in Enterprise Manager. However, if I connect to SQL*Plus and query the database directly I get this:
SQL> select dbms_wm.getworkspace from dual;
GETWORKSPACE
LIVE
I have tried uninstalling and reinstalling the Oracle Workspace Manager but this has had no effect. I had no interest in workspaces before I discovered that this "missing" LIVE workspace was causing a problem in our MapInfo-based software application.
Any ideas why it's there in SQL*Plus but not Enterprise Manager?
Would be grateful for any advice.
Thanks
Stuart

Hi,
I ran into this situation recently. This can potentially happen when doing a full import/export of a database where the workspace manager version on the exported database does not match the version on the import database.
In database releases since 10.2, the wmsys schema is no longer exported when performing a full database export. When the versions do not match, the procedural actions that are used to import the required data will not be run. As a result, the LIVE workspace will be missing. Since you are on 9.2.0.6, this could also occur due to any other error that prevents the procedural actions from running. You would need to check the import logs to see if this occurred.
If this is what happened in your case, inserting the missing row into the wmsys.wm$workspaces_table table will not completely fix the problem as there is additional metadata that will not be imported.
Regards,
Ben

Similar Messages

Unlock Rows in LIVE workspace

Hi,
Is there a way to unlock rows locked by other users using the Schema Owner account?
I tried to execute DBMS_WM.unlockrows('LIVE','ROADS_GEOM','FEATID > 0','USER','ES'); and DBMS_WM.unlockrows('LIVE','ROADS_GEOM','FEATID > 0','ALL','ES');
But when I checked the _LOCK views, there are still Locked Rows by other Users in LIVE Workspace.
Thanks in Advance.
Edited by: rcx4009v2 on Jan 29, 2013 8:02 PM

Hi RCX,
Have you tried
DBMS_WM.unlockrows('NONE','ROADS_GEOM','','ALL','VE');
Documentation says:A value of NONE can be used if lock_mode is set to VE (version-exclusive). This causes rows locked by any workspace to be unlocked.
If the where_clause parameter is not specified, all rows in table_name are made accessible.Also: when you tried to unlock, was everybody else logged out an were there no more sessions active?
HTH,
Stefan

CSS, Design Mode vs Live Mode vs Missing Manual

Hi,
I downloaded the trial version of DreamWeaver to see if I'd like to purchase it. To get a feeling for it, I've been using the CSS3 Missing Manual and doing the tutorials. Several times I've put code into DreamWeaver then clicked over to Live/Design Modes to see how it was coming along and what was supposed to happen wasn't visible BUT when I copy and past either the CSS or HTML into Coda, it comes out just as the book says it should. Any suggestions as to why?
I just tried to add text shaddow using the following which works in Coda but not DreamWeaver -- and it's really frustrating.
body{background-color:rgb(255,255,255);border: 3px solid rgb(75,75,75); box-shadow:0 0 15px 5px rgba(51,51,255,1);width:760px; margin-top:20px; margin-left:auto; margin-right:auto;padding:15px;}
Also, when I add CSS into my webpage in DW Live Mode will show it but Design Mode will not. Is that normal? What is the use of Design Mode vs Live Mode?
Thank you,
ct

But the code I listed above doesn't preview (correctly) in either view, but will view correctly in Coda (a cheaper than DreamWeaver webpage builder). I don't understand why. It there a special property to doing floating that I'm not aware of? Theimage with the blue bloat is from Coda, the other image is from DW. Notice the difference? It's the same code. How can that be? I'm guessing that DW is set up differently but I'm not sure how to change it so that it displays correctly. Any suggestions?

Workspace Background missing CS5

Can anyone assist with the following?
I am running CS4 on a mac pro. I have recently downloaded the trial version of CS5. The installation appeared to have installed correctly, indeed it operates quite normally with one exception ....
I can see my desktop through what should be the workspace background. I have all the CS5 menus in the correct places ie at the top of the screen, the tools to left and the palettes to the right but the centre working area is completely transparent so much so that I can see any open programs running. In short if I open CS5 and do nothing at all the workspace background is missing. If I open an image and size it accordingly CS5 appears visually quite normal until I close the image when the desktop can once again be seen.
I have tried resetting the workspace. I have tried all the pre loaded workspaces each provides the same problem. I have 'Googled' this issue without success.
Regards
Fredzie

[SW] wrote:
...Again, no long-time Mac user I know utilizes the Application Frame. They have no need for it.
Nice to meet you. My first Mac was a IIcx. Is that "long-time" enough?
I'm fully capable of understanding when marketing mumbo-jumbo is being pushed. But I'm more inclined to believe an actual Photoshop developer than groundless conspiracy theories from someone in a forum. Why would Adobe need to market this feature? No reasonable customer is going to return a Photoshop Mac license, return their Mac and go back to using Windows because they are susprised by being able to see through to the desktop. Adobe has nothing to gain from this feature, except what John Nack described.
UIs are not designed to cater to an imaginary mass migration. UIs are designed to improve productivity.
To think Adobe is trying to help a migration from one platform to another is insanity. The relationship between Apple and Adobe is no better than the relationship between Microsoft and Adobe. Adobe does not care what platform you use. They do not sell OS's.
You clearly did not read Nack's full post or else you would have noticed the discussion of apps outside the Adobe realm. There are plenty of Mac apps that use the full screen... even before OSX. Kai, anyone? If you are so put off by this idea, you may want to invest in incontinence apparel prior to upgrading to Lion, which will offer even more fullscreen apps.
A return tip... just because people might read your posts... doesn't mean you are in any way believed.

Western Digital My Book Live iTunes files missing

I have a Western Digital My Book Live in which I keep my iTunes Library on. Last night we watched a movie on Apple TV streeming from iTunes. When I got up this morning to connect to itunes on the computer it said "iTunes Library cannot be found" So I went to the Western Digital My Book Live drive to select the Library. To my surprize there was nothing in the iTunes folder. The drive says that 1.2TB are used and my iTunes Library is about 800GB so the files should be there as no one has deleated them.
If anyone has any idea of what caused this of how the fix it please help. This is a lot of info to loose.

Pudiste resolver el problema del Apple TV con el WD Book Live

Live 5 keeps missing my installed drivers, GPU, INF drivers issue

1 time out of 10 my sli gtx 580's have a exclamsion mark on the in device manager & my resolution is only 1280 x 1024 on my 27" native 1080p 3d monitor. If I re-install the nvidia lastest drivers, restart and unplugall my usb devices it sorts it, why?
Also Live 5 update keeps saying I need to download intel.INF update 9.2.0.1021 to 9.2.0.1030, which when I try it says it was succussfuly & I should restart but no joy ,Im still on the older version?
Same with realtek PCIe network drivers 7.37.1229.2010 update to 7.46.610.2011 BSOD once installed on restart!
Help anyone else on the Big Bang Marshall having similer issues?
Thanks

My reply only concerns INF. The Intel INF drivers is a complete package for a large number of chipsets. The updated file simply adds additional chipsets to the collection. It therefore will not change anything on what you already have. Each MB will simply extract the appropriate drivers for the chipset on the MB from the collection in the file.
Your MB will use only that part of the file indicated below.
List of chipsets covered by that file:
Intel® 3 Series Chipsets
Intel® 4 Series Chipset
Intel® 5 Series Chipset
Intel® 6 Series Chipset
Intel® 848P Chipset
Intel® 865 Chipset Family
Intel® 875P Chipset
Intel® 910 Express Chipset Family
Intel® 915 Express Chipset Family
Intel® 915GV Express Chipset (embedded)
Intel® 925X Express Chipset Family
Intel® 945 Express Chipset Family
Intel® 945G Express Chipset (embedded)
Intel® 946 Express Chipset Family
Intel® 955X Express Chipset
Intel® 965 Express Chipset Family
Intel® 975X Express Chipset
Intel® C200 Series Chipset
Intel® Chipset Software Installation Utility
Intel® E7221 Chipset
Intel® E7230 Chipset
Intel® E7320 Chipset
Intel® E7520 Chipset
Intel® E7525 Chipset
Intel® E8500 Chipset
Intel® E8501 Chipset
Intel® E8870 Chipset
Intel® NM10 Express Chipset
Intel® Q35 Express Chipset (embedded)
Intel® Q45 Express Chipset (embedded)
Intel® Q965 Express Chipset (embedded)
Intel® System Controller Hub US15W Chipset (Embedded)
Intel® X58 Express Chipset
Mobile Intel® 4 Series Express Chipset Family
Mobile Intel® 5 Series Chipset
Mobile Intel® 6 Series Chipset
Mobile Intel® 910GML Express Chipset
Mobile Intel® 915 Express Chipset Family
Mobile Intel® 915GME Express Chipset
Mobile Intel® 945 Express Chipset Family
Mobile Intel® 945GME Express Chipset
Mobile Intel® 945GSE Express Chipset (embedded)
Mobile Intel® 965 Express Chipset Family
Mobile Intel® GM45 Express Chipset (embedded)
Mobile Intel® GME965 Express Chipset
Mobile Intel® HM55 Express Chipset
Mobile Intel® HM57 Express Chipset
Mobile Intel® QM57 Express Chipset
Mobile Intel® QS57 Express Chipset

Photoshop cc 2014 my workspace button is missing

I'm running the updated Photoshop CC 2014 on a new 27" retina display iMac. I just noticed the button for the workspaces is missing. I can see the workspaces if I go to the menu bar and click on Window > Workspaces but the button is completely missing from the the control panel. I deleted the Workspaces preferences. I would be grateful for any help.

I forgot to mention that I'm using Yosemite. By the way, I solved the problem. I went to the Preferences panel and in the Interface tab, I un-clicked Enable Narrow Options Bar. For some reason after I did that, the Workspace button came back on. I've never had that problem before. Maybe it's a bug with Yosemite and Photoshop. I hope I can help someone else frustration.

Automatically refreshed workspace and changes into LIVE

Hi,
I've noticed that changes made directly into LIVE
are immediately visible to automatically refreshed
child workspaces. However the answer to the FAQ
question "When sharing changes made in a child
workspace with another child workspace, should I
use periodic (manual) or continually (automatic)
refresh?", states that this type of change must
be refreshed manually.
What is the expected behaviour afterall?
Regards,
Karina Borges

Karina,
For continually refreshed workspaces, changes made in the LIVE workspace will be immediately visible.
For non-continually refreshed (NCR) workspaces, the changes are not immediately visible - to see the changes, NCR workspaces have to be manually refreshed.
We will update the FAQ to make this point clearer.
regards,
- Ramesh.

Parts missing on PP CS3 workspace window when opening...Weird!

When I open a 1 hr project the opening workspace has missing elements of the window. If I click on some missing elements they appear. Then if the workspace window actually opens properly, clicking on the drop down menus also have missing elements. Then when I scrub the CTI it leaves a trace of every position it was during that move. Then finally, when I go to File>Preferences> Memory it crashes completely and vanishes.Can't render a piece without it crashin
A bit of histry, I replaced the system mobo a couple of months ago and it appears ok after that. Rendered just fine, but for some reason, it's not working now. I swapped the Graphics card and I have removed and reinstalled Production Prem CS3 2x and still the same problem. I can't edit 'cause the cursor "sticks' to the cti or whatever tool I use. I frequently get out of memory warnings and the system appears really sluggish even though I have a Quad Core CPU. The overall application seems like its running on an under powered under memory machine but I have maxed out the mem on this XP 32 bit system.
Att is a few pics to identify the problem..
Any suggestions before I tear it down and rework it !!??

Thanks Hunt. I think I have resoled the major problem.. I simply rebuilt a
new project using files from the original source. I removed all Media caches
and preview files so essentially starting over. Guess what!! Its not only
rendered a 1 hr timeline but mpeg2 encoded too...with all the pieces of the
workspace window accounted for. I have cleaned up my machine using RegCure,
scanned for virus and malware and cross your fingers we're good to go..
In summary, it appears when I replaced the mobo, elements of the composition
/timeline got damaged even though they appear 'normal' on preview. I was
using the same projects that were created before the mobo change.
Well that's my read at this point. So far so good.. Now I have to deal with
Encore and the disc burning issue... Be nice just get the work done instead
of doing battle wit the beast..
Thanks for everyones input very much appreciated..

How to create one user for one workspace

Hi experts,
I just wanted to know if anyone of you ever generated a user in a 11g database who only is able to see the content of one specifc workspace.
The workflow would be that an admin-like user generates a new workspace and after this he creates a new user who can only see/change the data in this workspace.
So when the new user is logging in, he is automatically in this new workspace and he has no priviliges to merge/create/rollback workspaces, or to change into another workspace.
Could anybody please give me a hint on how to achieve this?
Regards,
Jens

Hi Jens,
Along with granting privileges on the specific tables, you would need to grant ACCESS_WORKSPACE using dbms_wm.grantWorkspacePriv on the specified workspace. Without granting any other privileges, the user would not be able to create additional child workspaces, or merge/rollback the workspace. Then, you would need to create a logon database trigger that places the user in the appropriate default workspace.
However, a user is always able to access the LIVE workspace. There currently isn't any way to prevent that.
Regards,
Ben

Is it possible to "freeze" a continually refreshed workspace?

Hello,
I'm developing a project management system based on workspaces.
The aim is to create and develop projects inside the workspaces, parallel to the stream LIVE, and after approvall, do the merge.
I have two requirements:
Req1 - Workspaces should be continually refreshed, during their "livetime".
Req2 - After the merge, it is necessary to save the final information in the workspace, just for future read.
I thought the following approach:
Use workspaces in CR mode and after merge, switch to NCR. The scenario would be stable and unchanging, maintaining the necessary historical data.
I found out that it's not possible to change a CR workspace to a NCR.
Besides, the raising of workspaces (tried with 30000), cause general database degradation. Queries on version-enabled and merge/refresh operations were getting slower and slower.
Three questions about this:
1 - Is there any way to "freeze" CR workspaces? Like... avoid the auto-refresh process?
2 - Is it natural that queries and merge / refresh operations become successively slower with increasing workspaces? (i noticed that many wmsys.wm$ tables/views are used in these processes and it seems to me that their performance is getting worse. Is that possible? If so, is there any way to optimize?)
3 - Assuming that the use of thousands of workspaces may have some performance issues, what is the best way to save a final (total and unchangeable) "image" of the database after doing the merge of a project?
NOTE:
I thought using a system with just one CR workspace (history WS) and savepoints... just to keep the final views of the projects.
After merging to LIVE, the history workspace would be auto-refreshed, I would put a savepoint there and keep the final vision. But with a CR workspace, the savepoint doesn't work in the way i need... the vision is altered every time we change rows in LIVE, right?
So, i tried to use a NCR workspace. After merge operation, i force a refresh in the history workspace, put the savepoint and it's done. But there's still a little problem with this scenario: LIVE may have hundreds or thousands of changes to refresh... the process can be slow and block the LIVE records for a long time.
Am i jumping to conclusions or assuming something wrong? Is there any technical solution that I'm not seeing?
Any help or ideas are welcome!
Thanks in advance.
Best regards,
Pedro Lourenço

Hi,
To answer your questions:
1. There is a way to freeze a workspace, using dbms_wm.FreezeWorkspace, but it would only prevent dmls / workspace operations from taking place within the child workspace. It would not remove the auto-refresh functionality of the workspace.
2. No, you should not being having a significant performance impact on queries by just adding workspace. Have the statistics of the WMSYS schema been gathered, and for the schemas that contain the version enabled tables? If not, I would recommend doing so. If you have done so already, I would need to see specific queries, etc.
3. If you need to get a snapshot of the data without the possibility of it being changed, you can't use a CR workspace, so your only option would be a NCR one. How much of the data that is being modified by a child workspace is being additionally modified by other children workspaces? Essentially, does each workspace work with its own distinct data or would there be alot of overlap(ie conflicts) between them? How many of these workspaces need to be merged and/or refreshed simultaneously?
Have you thought about creating a savepoint in the LIVE workspace at the time of the merge and use that as the snapshot? It would not work in all use cases, so would depend on the specifics of your setup. I'll continue thinking if there are existing ways to accomplish this.
Also, in regards to CR workspace savepoints, the savepoint data can be changed if the child workspace doesn't have its own version of the row. Any new row in LIVE would override the view of the data from each savepoint.
Regards,
Ben

Missing effects in cs5. Error message when I add presets.

So I'm new to AE, and need some help. When I add the "rotate over time" animation preset to a title, it says "this favorite contains 1 reference to a missing effect. Please install the following effect to restore this reference". Does anyone know how I can get this worked out? Everything is there in my effects and presets, except this error message keeps showing up when I add it. When I look in my presets folder, the transform is clearly there. Any help? Something I'm missing/overlooking?
Specs: 2010 17 in mbp, 2.53 ghz i5, 8 gb ram, 500 gb. AE cs5 10.2

Nothing to worry about. This is a so called "Pseudo Effect". More details here: http://www.batchframe.com/tutorials/12
Basically the documentation of this custom preset should have contained some code thant you need to insert into "PresetEffects.xml" and is just for naming purposes. So as long as you can live with the "missing effect" name you have nothing to worry about.

How can I watch Days of our Lives from yesterday online?

How can I watch an episode from Days of our Lives that I missed?

Can you view it on other android browsers?
Have you tried clearing the cache and cookies?
The Firefox cache temporarily stores images, scripts, and other parts of websites while you are browsing. <br>
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies, do the following:
#Tap the menu icon located at the top right corner. This is the icon with 3 bars. On older Android devices you'll have to press the hardware menu key and then tap More.
#Tap '''Settings'''.
#After that, you will be taken to the settings screen. In the settings screen, look under the section '''''Privacy & Security''''' and select '''Clear private data'''.
#You will then be taken to a list of what can be cleared. Select the following 2 for deletion:
#*Cookies & active logins
#*Cache
#After those have been selected, tap the '''Clear data''' button to actually clear the cache and cookies.
Did this help you with your problems? Please let us know!

Export/Import full database dump fails to recreate the workspaces

Hi,
We are studying the possibility of using Oracle Workspace to maintain multiple versions of our business data. I recently did some tests with the import/export of a dump that contains multiple workspaces. I'm not able to import the dump successfully because it doesn't recreate the workspaces on the target database instance, which is an empty Oracle database freshly created. Before to launch the import with the Oracle Data Pump utility, I have the "LIVE" workspace that exists in the WMSYS.WM$WORKSPACES_TABLE table. After the import is done, there is nothing in that table...
The versions of the Oracle database and Oracle Workspace Manager are the same on source and target database:
Database version (from the V$VERSION view):
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Workspace Manager version (from the WM_INSTALLATION view):
OWM_VERSION: 10.2.0.4.3
In order to recreate the tablespaces successfully during the full import of the dump, the directory structure for the tablespaces is the same on the target database's computer. I used the instructions given in this document, section "1.6 Import and Export Considerations" at page 1-19:
http://www.wyswert.com/documentation/oracle/database/11.2/appdev.112/e11826.pdf
Considering that the release of Oracle database used is version 10.2.0.4, I use the following command to import the dump since it doesn't contain the WMSYS schema:
impdp system/<password>@<database> DIRECTORY=data_pump_dir DUMPFILE=expfull.dmp FULL=y TABLE_EXISTS_ACTION=append LOGFILE=impfull.log
The only hints I have in the import log file are the following block of lines:
1st one:
==============================
Traitement du type d'objet DATABASE_EXPORT/SYSTEM_PROCOBJACT/PRE_SYSTEM_ACTIONS/PROCACT_SYSTEM
ORA-39083: Echec de la création du type d'objet PROCACT_SYSTEM avec erreur :
ORA-01843: ce n'est pas un mois valide
SQL en échec :
BEGIN
if (system.wm$_check_install) then
return ;
end if ;
begin execute immediate 'insert into wmsys.wm$workspaces_table
values(''LIVE'',
''194'',
''-1'',
2nd one at the end of the import process:
==============================
Traitement du type d'objet DATABASE_EXPORT/SCHEMA/POST_SCHEMA/PROCACT_SCHEMA
ORA-39083: Echec de la création du type d'objet PROCACT_SCHEMA avec erreur :
ORA-20000: Workspace Manager Not Properly Installed
SQL en échec :
BEGIN
declare
compile_exception EXCEPTION;
PRAGMA EXCEPTION_INIT(compile_exception, -24344);
begin
if (system.wm$_check_install) then
return ;
end if ;
execute immediate 'alter package wmsys.ltadm compile';
execute immediate 'alter packag
The target operating system is in french... here is a raw translation:
1st one:
==============================
Treatment of object type DATABASE_EXPORT/SYSTEM_PROCOBJACT/PRE_SYSTEM_ACTIONS/PROCACT_SYSTEM
ORA-39083: Object type creation failed PROCACT_SYSTEM with error :
ORA-01843: invalid month
failed SQL :
BEGIN
if (system.wm$_check_install) then
return ;
end if ;
begin execute immediate 'insert into wmsys.wm$workspaces_table
values(''LIVE'',
''194'',
''-1'',
2nd one at the end of the import process:
==============================
Treatment of object type DATABASE_EXPORT/SCHEMA/POST_SCHEMA/PROCACT_SCHEMA
ORA-39083: Object type creation failed PROCACT_SCHEMA with error :
ORA-20000: Workspace Manager Not Properly Installed
failed SQL :
BEGIN
declare
compile_exception EXCEPTION;
PRAGMA EXCEPTION_INIT(compile_exception, -24344);
begin
if (system.wm$_check_install) then
return ;
end if ;
execute immediate 'alter package wmsys.ltadm compile';
execute immediate 'alter packag
By the way, the computer of the source database is Vista 64 in english and the destination computer is Vista 64 in french, do you think this has anything to do with these error messages? The parameters of the NLS_SESSION_PARAMETERS view are the same in the source and target database...
Thanks in advance for your help!
Joel Autotte
Lead Developer
Edited by: 871007 on Jul 13, 2011 7:31 AM

I tried to import the full database dump with the "imp" command and I had the same error message with more detail:
. Import d'objets SYSTEM dans SYSTEM
IMP-00017: Echec de l'instruction suivante avec erreur ORACLE 1843 :
"BEGIN "
"if (system.wm$_check_install) then"
" return ;"
" end if ;"
" begin execute immediate 'insert into wmsys.wm$workspaces_ta"
"ble"
" values(''LIVE'',"
" ''194'',"
" ''-1'',"
" ''SYS'',"
" *to_date(''09-DEC-2009 00:00:00'', ''DD-MON-YYYY HH"*
*"24:MI:SS''),"*
" ''0'',"
" ''UNLOCKED'',"
" ''0'',"
" ''0'',"
" ''37'',"
" ''CRS_ALLNONCR'',"
" to_date(''06-APR-2011 14:24:57'', ''DD-MON-YYYY HH"
"24:MI:SS''),"
" ''0'',"
" '''')'; end;"
"COMMIT; END;"
IMP-00003: Erreur ORACLE 1843 rencontrée
ORA-01843: ce n'est pas un mois valide
ORA-06512: à ligne 5
The call to the TO_DATE function with the string of the date format is incompatible with the format and language set in the NLS parameters of my database. Since I know that the "imp" and "exp" commands work client side (unlike "impdp" and "expdp"), I did a full export of the source database from the computer on which I try to import the dump to have the same language exported in the dump and I was able to import the dump successfully.
But, I would like to use the Data Pump tool instead of the old import and export tools. How would it be possible to set the NLS parameters that "impdp" must use before to launch the import of the dump?
The NLS parameters are set to the "AMERICAN" settings in both source and destination database when I validate that with the "NLS_DATABASE_PARAMETERS" view. The dump I did with "expdp" on the source database exported the data with the "AMERICAN" settings as well...
On the destination database, the computer language is in french and I guess it is considered by the Data Pump import tool since it outputs the log in the language of the computer and it tries to do a TO_DATE with the wrong date format because it works with the "CANADIAN FRENCH" settings...
Any suggestions? I'll continue to read on my side and re-post if I find the solution.
Thanks!
Edited by: 871007 on Jul 19, 2011 8:42 AM
Edited by: 871007 on Jul 19, 2011 8:43 AM
Edited by: 871007 on Jul 19, 2011 8:43 AM

Workspace continually refreshed, Savepoints & MergeWorkspace scenario

Hi,
I'm using Oracle WorkspaceManager from oracle version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
1./ I create a workspace with the isRefreshed flag set to true.
2./ I immediately create a savepoint A.
3./ I insert a row in a versioned table.
4./ Create savepoint B.
4./ exec dbms_wm.setdiffversions('workspace', 'A', 'workspace', 'B')
5./ Querying the diff view should show me 3 rows.
DiffBase and workspace, A rows would have wmDiffCode: NE (Not existing)
workspace, B row would have wmDiffCode: I (insert)
All is fine so far.
5./ I merge the workspace to LIVE
6./ I query the diff view again:
DiffBase and workspace, A rows would have wmDiffCode: NC (Not changed)
workspace, B row would have wmDiffCode: I (insert)
I confirm that step 6./ shows wmDiffCode: NE if I disable continual refresh.
Can somebody tell me why the wmDiffCode changes to NC in this scenario? I thought that creating a savepoint was saving a snapshot of the workspace (including DIFF view states) that should not be alterable by any refresh operations on the workspace, it seems like this assertion is false.
Any insights appreciated,
Thanks,
-Guillaume Jeudy

Hi,
This is expected. The NE code indicates that the row does not currently exist as of that version/savepoint. However, when the row is merged into the LIVE workspace, and due to the fact that the child workspace is being continually refreshed, this new row will become visable from savepoint A. Any changes into the LIVE will automatically refresh any child workspaces(including earlier savepoints) up to the point where each row is further modified. Since the row is now visible from savepoint A, the code needs to changed from NE to NC.
When the workspace is not being continually refreshed, the merge into the LIVE workspace does not cause any changes to savepoint A, and so the row remains not existent.
Regards,
Ben

LIVE workspace is missing... or is it? [9.2.0.6.0]

Similar Messages

Maybe you are looking for